Electronic flash units for camera contain a capacitor for storing the energy used to produce the flash. In one such unit, the flash lasts for 1675s with an average light power output of 2.70 x 105 W . (a) If the conversion of electric energy to light is 95% efficient ( the rest of the energy goes to thermal energy), how much energy must be stored in the capacitor for one flash

Answer:

False

Explanation:

parts that are smaller than protons neutrons and electrons

Answer:

Waves are disorders that travel through a fluid medium. Several simple wave features include frequency, period, wavelength, and amplitude.

Explanation:

Answer:

a.  9.99625 cm b. 68 °C

Explanation:

(a) What is the length of the rod at the freezing point of water (0 0C)?

Before we find the length of the rod, we need to find the coefficient of linear expansion, α = (L - L₀)/[L₀(T - T₀)] where L₀ = length of rod at temperature T₀ = 10.0 cm, T₀ = 20 °C, L = length of rod at temperature T = 10.015 cm and T = 100 °C

Substituting the values of the variables into the equation, we have

α = (L - L₀)/[L₀(T - T₀)]

α = (10.015 cm - 10.0 cm)/[10.0 cm(100 °C - 20 °C)]

α = 0.015 cm/[10.0 cm × 80 °C]

α = 0.015 cm/[800.0 cm °C]

α = 0.00001875 /°C

We now find the length L₁ at T₁ = 0 °C from

L₁ = L₀(1 + α(T₁ - T₀))

So, substituting the values of the variables into the equation, we have

L₁ = L₀(1 + α(T₁ - T₀))

L₁ = 10.0 cm[1 +  0.00001875 /°C(0° C - 20 °C)]

L₁ = 10.0 cm[1 +  0.00001875 /°C × -20° C]

L₁ = 10.0 cm[1 - 0.000375]

L₁ = 10.0 cm[0.999625]

L₁ = 9.99625 cm

(b) What is the temperature if the length of the rod is 10.009 cm?

With length L₃ = 10.009 cm at temperature T₃, using

L₃ = L₀(1 + α(T₃ - T₀))

making T₃ subject of the formula, we have

L₃/L₀ = 1 + α(T₃ - T₀)

L₃/L₀ - 1 = α(T₃ - T₀)

T₃ - T₀ = (L₃/L₀ - 1)/α

T₃ = T₀ + (L₃/L₀ - 1)/α

substituting the values of the variables into the equation, we have

T₃ = 20 °C + (10.009 cm/10.0 cm - 1)/0.00001875 /°C

T₃ = 20 °C + (1.0009 - 1)/0.00001875 /°C

T₃ = 20 °C + 0.0009/0.00001875 /°C

T₃ = 20 °C + 48 °C

T₃ = 68 °C

Answer:

The weight of the bird is equal to 7.28 N.

Explanation:

The upward force acting on the bird = 7.28 N

The bird is climbing at a constant rate of 1 m/s.

We need to find the weight of the bird.

We know that the weight of an object is the force of gravity acting on it. It can be calculated as follows :

W = mg

In this case, 7.28 N of force is acting on the object. Hence, the weight of the bird is equal to 7.28 N.

Answer:

60 °C

Explanation:

From the question given above, the following data were obtained:

Mass of 1st sample (M₁) = 200 g

Temperature of 1st sample (T₁) = 80 °C

Mass of 2nd sample (M₂) = 100 g

Temperature of 2nd sample (T₂) = 20 °C

Equilibrium temperature (Tₑ) =?

NOTE: Since the sample are the same, the specific heat capacity is constant.

We can obtain the equilibrium temperature as follow:

Heat lost by 1st = heat gained by the 2nd

M₁C(T₁ – Tₑ) = M₂C(Tₑ – T₂)

Cancel out C

M₁(T₁ – Tₑ) = M₂(Tₑ – T₂)

200 (80 – Tₑ) = 100 (Tₑ – 20)

Clear bracket

16000 – 200Tₑ = 100Tₑ – 2000

Collect like terms

16000 + 2000 = 100Tₑ + 200Tₑ

18000 = 300Tₑ

Divide both side by 300

Tₑ = 18000 / 300

Tₑ = 60 °C

Therefore, the equilibrium temperature (i.e the final temperature) of the mixture is 60 °C.

Answer:

Explanation:

I can tell you what the answers for the middle column are, but if you don't know how to solve total energy problems, they won't make any sense to you at all.

First row, KE = 0

Second row, KE = 220500 J

Third row, KE = 183750 J

Fourth row, KE = 205800 J

That's also not paying any attention to significant digits because your velocity only had 1 and that's not enough to do the problem justice. I left all the digits in the answer. Round how your teacher tells you to.

Answer:

The larger the amplitude of the waves, the louder the sound. Pitch (frequency) – shown by the spacing of the waves displayed. The closer together the waves are, the higher the pitch of the sound.

Explanation:

Answer:

220 A

Explanation:

The magnetic force on the floating rod due to the rod held close to the ground is F = BI₁L where B = magnetic field due to rod held close the ground = μ₀I₂/2πd where μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, I₂ = current in rod close to ground and d = distance between both rods = 11 mm = 0.011 m. Also, I₁ = current in floating rod and L = length of rod = 1.1 m.

So, F = BI₁L

F = (μ₀I₂/2πd)I₁L

F = μ₀I₁I₂L/2πd

Given that the current in the rods are the same, I₁ = I₂ = I

So,

F = μ₀I²L/2πd

Now, the magnetic force on the floating rod equals its weight , W = mg where m = mass of rod = 0.10kg and g = acceleration due to gravity = 9.8 m/s²

So, F = W

μ₀I²L/2πd = mg

making I subject of the formula, we have

I² = 2πdmg/μ₀L

I = √(2πdmg/μ₀L)

substituting the values of the variables into the equation, we have

I = √(2π × 0.011 m × 0.1 kg × 9.8 m/s²/[4π × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2 × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2.2 × 10⁻⁷ H])

I = √(0.0049 × 10⁷kgm²/s²H)

I = √(0.049 × 10⁶kgm²/s²H)

I = 0.22 × 10³ A

I = 220 A

Answer:

28Nm

Explanation:

Torque is expressed as the prduct of force and radius

Given

Force = 140N

radius  = 0.20m

Torque = 140 * 0.2

Torque = 140 * 1/5

Torque = 28Nm

Hence the amouunt of torque applied is 28Nm

Answer:

I think it might be 8kg grams because it is bigger

Answer:

=>8x+9x+5+3

=>8x+9x+5+3=>17x+8

Answer:

The answer is "telescopes".

Explanation:

Throughout ancient times, astronomical observatories have indeed been available, and so many historical locations were reserved for astronomical observations. All contemporary astronomers lacked within those older telescopes were lenses until 1610. A telescope is indeed an instrument used to view far-off objects. Telescopes often are being used to look at planets and stars.

Answer:

   i = 1.09 10⁴ A

Explanation:

For this exercise we will look for the resistance of the wire

          R = ρ L / a

the area of ​​the wire is

          a =ππ r² = π πd² / 4

we substitute

         R = ρ L 4 / π d²

          R = 1.72 10⁻⁸   20  4/π 8 10⁻⁴

         R = 5.47 10⁻⁴ Ω

to calculate the current we use ohm's law

           V = R i

            i = V / R

            i = 6 / 5.47 10⁻⁴

            i = 1.09 10⁴ A

Answer:

Explanation:

Equivalent resistance of parallel combination of two resistors of 3 ohms and 4 ohms .

R₁ = 3 x 4 / ( 3 + 4 )

= 12 / 7 = 1.7 ohms .

This equivalent resistance is connected with 4 ohms in series

Total resistance = 1.7 ohms + 4 ohms

= 5.7 ohms.

Hence effective resistance of the circuit = 5.7 ohms .

Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity

Hope this helps! Good luck with future homework and exams!

Answer:

The uniy which is accepted all over the world is called SI unit.

Explanation:

The system of measurement that is agreed by the international convention if scientists that is held in paris of France to adopt an international unit is called SI unit unit.

Answer:

Explanation:

That is a fun question!

Without a hot radiating core like Earth, Mars will have very different geological and seismic events. The Mars core will be relatively cold and there will not be any molten magma. So Mars will not have earthquakes or volcano activities. Both only occur when there is magma flowing or tectonic plate motion and they will not occur with a cold core.

Answer:

3.504 MeV

Explanation:

Given that;[tex]\frac{A}{Z} X ---->\frac{A-4}{Z-2} Y +\alpha + Q[/tex]

Also;

[tex]Q= KE_{\alpha } (M_{Y} + M_{\alpha } /M_{Y[/tex])

Mass number of X = 229

Mass number of Y = 225

Mass number of alpha particles = 4

Kinetic energy of alpha particles = 3.443 MeV

Q = 3.443 MeV (225 + 4/225)

Q= 3.504 MeV