Answer:
The value [tex]F = 0.1396 \ N [/tex]
Explanation:
From the question we are told that
The volume blood ejected is [tex]V = 65 \ cm^3 = 65*10^{-6} \ m^3[/tex]
The velocity of the blood ejected is [tex]v = 103 \ cm/s = \frac{103}{100} = 1.03 \ m/s[/tex]
The density of blood is [tex]\rho = 1060 \ kg/m^3[/tex]
The heart beat is [tex]R = 59 \ bpm(beats \ per \ minute) = \frac{59}{60}= 0.9833\ bps[/tex]
The average force exerted by the blood on the wall of the aorta is mathematically represented as
[tex]F = 2 * \rho * V * R * v[/tex]
=> [tex]F = 2 * 1060 * 65*10^{-6} * 0.9833 * 1.03[/tex]
=> [tex]F = 0.1396 \ N [/tex]
A piece of copper wire with thin insulation, 200 m long and 1.00 mm in diameter, is wound onto a plastic tube to form a long solenoid. This coil has a circular cross section and consists of tightly wound turns in one layer. If the current in the solenoid drops linearly from 1.60 A to zero in 0.120 seconds, an emf of 80.0 mV is induced in the coil. What is the length of the solenoid, measured along its axis
Answer:
N= 3
Explanation:
For this exercise we must use Faraday's law
E = - dФ / dt
Ф = B . A = B Acos θ
tje bold indicate vectors. As it indicates that the variation of the field is linear, we can approximate the derivatives
E = - A cos θ (B - B₀) / t
The angle enters the magnetic field and the normal to the area is zero
cos 0 = 1
A = π r²
In the length of the wire there are N turns each with a length L₀ = 2π r
L = N (2π r)
r = L / 2π N
we substitute
A = L² / (4π N²)
The magnetic field produced by a solenoid is
B = μ₀ N/L I
for which
B₀ = μ₀ N/L I
The final field is zero, because the current is zero
B = 0
We substitute
E = - (L² / 4π N²) (0 - μ₀ N/L I) / t
E = μ₀ L I / (4π N t)
N = μ₀ L I / (4π t E)
The electromotive force is E = 0.80 mV = 0.8 10⁻³ V
let's calculate
N = 4π 10⁻⁷ 200 1.60 / (4π 0.120 0.8 10⁻³)]
N = 320 10⁻⁷ / 9.6 10⁻⁶
N = 33.3 10⁻¹
N= 3
The space shuttle releases a satellite into a circular orbit 630 km above the Earth.
How fast must the shuttle be moving (relative to Earth's center) when the release occurs?
Answer:
7,539 m/s
Explanation:
Let's use this equation to find the gravitational acceleration of this space shuttle:
[tex]\displaystyle g=\frac{GM}{r^2}[/tex]We know that G is the gravitational constant: 6.67 * 10^(-11) Nm²/kg².
M is the mass of the planet, which is Earth in this case: 5.972 * 10^24 kg.
r is the distance from the center of Earth to the space shuttle: radius of Earth (6.3781 * 10^6 m) + distance above the Earth (630 km → 630,000 m).
Plug these values into the equation:
[tex]\displaystyle g=\frac{(6.67\cdot 10^-^1^1 \ Nm^2kg^-^2)(5.972\cdot 10^2^4 \ kg)}{[(6.3781\cdot 10^6 \ m)+(630000 \ m)]^2}[/tex]Remove units to make the equation easier to read.
[tex]\displaystyle g=\frac{(6.67\cdot 10^-^1^1 )(5.972\cdot 10^2^4 )}{[(6.3781\cdot 10^6)+(630000 )]^2}[/tex]Multiply the numerator out.
[tex]\displaystyle g=\frac{(3.983324\cdot 10^1^4)}{[(6.3781\cdot 10^6)+(630000 )]^2}[/tex]Add the terms in the denominator.
[tex]\displaystyle g=\frac{(3.983324\cdot 10^1^4)}{[(7008100)]^2}[/tex]Simplify this equation.
[tex]\displaystyle g=8.11045189 \ \frac{m}{s^2}[/tex]The acceleration due to gravity g = 8.11045189 m/s². Now we use the equation for acceleration for an object in circular motion which contains v and r.
[tex]\displaystyle a = \frac{v^2}{r}[/tex]a = g, v is the velocity that the space shuttle should be moving (what we are trying to solve for), and r is the radius we had in the previous equation when solving for g.
Plug these values into the equation and solve for v.
[tex]\displaystyle 8.11045189 \ \frac{m}{s^2} = \frac{v^2}{7008100 \ m}[/tex]Remove units to make the equation easier to read.
[tex]\displaystyle 8.11045189 = \frac{v^2}{7008100}[/tex]Multiply both sides by 7,008,100.
[tex]56838857.89=v^2[/tex]Take the square root of both sides.
[tex]v=7539.154985[/tex]The shuttle should be moving at a velocity of about 7,539 m/s when it is released into the circular orbit above Earth.
Which has a greater force: a semi-truck at rest or a moving bicycle?
Although the semi truck certainly has a larger mass, it is not in motion and therefore does not have any momentum. The bicycle however has both mass and velocity and therefore has the larger momentum of the pair.
g While hauling a log in the back of a flatbed truck, a driver is pulled over by the state police. Although the log cannot roll sideways, the police claim that the log could have slid out the back of the truck when accelerating from rest. The driver claims that the truck could not possibly accelerate at the level needed to achieve such an effect. Regardless, the police write a ticket, and the drive
Answer:
The minimum coefficient of static friction required, µ = 0.10
Note. The question is incomplete. The complete question is given below:
While hauling a log in the back of a flatbed truck, a driver is pulled over by the state police. Although the log cannot roll sideways, the police claim that the log could have slid out the back of the truck when accelerating from rest. The driver claims that the truck could not possibly accelerate at the level needed to achieve such an effect. Regardless, the police write a ticket anyway and now the driver court date is approaching.
The log has a mass of m = 929 kg; the truck has a mass of M = 8850 kg. According to the truck manufacturer, the truck can accelerate from 0 to 55 mph in 23.0 seconds, but this does not account for the additional mass of the log. Calculate the minimum coefficient of static friction μs needed to keep the log in the back of the truck.
Explanation:
First, velocity in mph is converted to m/s
1 mph = 0.447 m/s
55 mph ≈ 24.6 m/s
The acceleration of the empty truck is a = v/t = 24.6 / 23 = 1.07 m/s²
Force that can be generated by the truck, F = ma
F = 8850kg * 1.07 m/s² = 9469.5 N
However, with the added mass of the log on it, the acceleration of the truck will become;
a = F / m = 9469.5 N / (8550+929)kg = 0.97 m/s²
Frictional force between the log and the truck = 0.97 m/s² * 929 kg = 901.13 N
Normal reaction on the truck due to the weight of the log, R = mg
R = 929 kg * 9.8m/s² = 9104.2 N
Coefficient of static friction, µ = F/R
µ = 901.13/9104.2
µ = 0.098 ≈ 0.10
Therefore, the minimum static friction required is µ = 0.10
Question 10 of 10
In the photoelectric effect, an electric current forms when light strikes a metal
surface. Which statement explains what causes the current?
O A. Electrons flow from one atom to another because the light acts as
a wave.
O B. The light causes electrons to flow in different directions within an
atom because light acts as a wave.
O C. Electrons are destroyed when light strikes a surface because the
light acts as particles.
D. Electrons are knocked off the surface when light strikes it because
the light acts as particles.
Explanation:
D. I hope i helped it should be right but if it isn't my bad
In the photoelectric effect, an electric current forms when light strikes a metal surface because electrons are knocked off the surface when light strikes it because the light acts as particles, The correct option is D.
What is the photoelectric effect?
It is the process of emission of electrons from the material because of absorption of electromagnetic radiation in form of photons of light waves.
The photoelectric effect explains the particle behavior of the light waves.
The photoelectric effect is responsible when electrons are knocked off the surface when light strikes it because the light acts as particles.
Learn more about the photoelectric effect
https://brainly.com/question/9260704
#SPJ2
calculate the force necessary to keep a mass of 2 kg moving on a circular path of radius 0.2 m with a period of 0.5 second. what is the direction of force
Answer:
jjjjj
Explanation:
dkcdzjc
Which of the following examples best represents an object with balanced forces acting upon it?
A - A boat accelerating through the water.
B - A book sitting at rest on a high shelf.
C- A wagon rolling down a steep hill.
D- A baseball thrown into the air.
Answer:the answer is “A book sitting on a high shelf” :)
Explanation:
A waterbed has a force of 1300N on the floor. It exerts 347 Pa of pressure. What is the area of the waterbed?
Answer:
Pressure = Force/Area
347 = 1300/Area
Area = 1300/347
area= 3.47m2
Answer:
I hope the above pic will help you
I will always help you understanding your assingments have a great day
#Captainpower
Define a rotation of the earth answer fast
Answer:
here u go
Explanation:
Earth's rotation is the rotation of planet Earth around its own axis. Earth rotates eastward, in prograde motion. As viewed from the north pole star Polaris, Earth turns counterclockwise.
mester Exam 1 11 of 35
A car has an oil drip. As the car moves, it drips oil at a regular rate, leaving a trail of spots on the road. Which diagram shows the spots
of car that is continuously slowing down?
A ray moving in water at 55.5 deg
enters plastic, where it bends to
48.7 deg. What is the index of
refraction for the plastic?
( water n = 1.33, Air n = 1.00 )
Answer:
Refractive index of the plastic = 1.46
Explanation:
By Snell's law,
[tex]\frac{\text{sin}\theta _{2} }{\text{sin}\theta _{1}}=\frac{n_1}{n_2}[/tex]
Here, [tex]\theta _1[/tex] = Angle of incidence in medium 1 (Plastic)
[tex]\theta_2[/tex] = Angle of refraction in medium 2 (Water)
[tex]n_1[/tex] = Refractive index of medium 1 (Plastic)
[tex]n_2[/tex] = Refractive index of medium 2 (Water)
By substituting values in the formula,
[tex]\frac{\text{sin}(48.7)}{\text{sin}(55.5)}=\frac{1.33}{n_2}[/tex]
[tex]n_2=\frac{1.33\times \text{sin}(55.5)}{\text{sin}(48.7)}[/tex]
= 1.46
Therefore, refractive index of the plastic = 1.46
Obesity and stress are confirmed risk factors for which of the following?
lost of nutrition in human
Answer:
True
Explanation:
Obesity and stress are confirmed risk factors for CHD
What is the magnitude of the Box's Acceleration?
The Box's Acceleration : g sin θ
Further explanationNewton's 2nd law explains that the acceleration produced by the resultant force on an object is proportional and in line with the resultant force and inversely proportional to the mass of the object
∑F = m. a
F = force, N
m = mass = kg
a = acceleration due to gravity, m / s²
We plot the forces acting on the block (picture attached) according to the y-axis and the x-axis.
Because the motion of the block is in the same direction as the x-axis, ignoring the friction force with the inclined plane, then
[tex]\tt \sum F_x=m.a\\\\W.sin\theta=m.a\\\\mgsin\theta=m.a\\\\a=gsin\thet\theta[/tex]
a steel girder weighting 700 lb is hoisted from gund level to the roof of a 70-ft building using a chain that weighs 4lb/running foot. Find the work done
Answer:
66.475kJ
Explanation:
Work done is the product of the force and perpendicular distance in direction of the force.
Work done = Force × distance
Given
Weight = 700lb
Distance = 70ft
1lb force = 4.448N
700lb force = 700(4.448) = 3113.6N
Distance = 70(0.305) = 21.35m
Work done = 3113.6×21.35
Work done ≈ 66,475Joules
Work done = 66.475kJ
What effect does atmospheric pressure have on density?
Answer:sometimes it commits to how it will happen
Explanation:
Answer:
Atmospheric pressure increases density
Explanation:
Atmospheric pressure decreases the volume of space, since volume is inversely proportional to density, density will increase.
what is the difference between alcoholic and Mercury thermometer based on their function?
giving brainiest to correct answer.
Imagine a 0.2 kg ball moving at 5 m/s colliding with a 0.3 kg ball moving at 2 m/s in the same direction. After the collision the 0.2 kg green ball stops moving and the 0.3 kg purple ball continues moving in the same direction.
giving brainiest to correct answer.
Answer:
[tex]5.33\ m/s[/tex]
Explanation:
[tex]We\ know\ that,\\Momentum=Mass*Velocity\\p=mv\\Hence,\\Lets\ first\ consider\ the\ case\ of\ the\ two\ balls\ 'Before\ Collision':\\\\Mass\ of\ the\ green\ ball=0.2\ kg\\Initial\ Velocity\ of\ the\ green\ ball=5\ m/s\\Initial\ Momentum\ of\ the\ green\ ball=5*0.2=1\ kg\ m/s\\\\Mass\ of\ the\ pink\ ball=0.3\ kg\\Initial\ Velocity\ of\ the\ pink\ ball=2\ m/s\\Initial\ Momentum\ of\ the\ pink\ ball=0.3*2=0.6\ kg\ m/s\\\\Total\ momentum\ of\ both\ the\ balls\ 'Before\ Collision'=1+0.6=1.6\ kg\ m/s[/tex]
[tex]Hence,\\Lets\ now\ consider\ the\ case\ of\ the\ two\ balls\ 'After\ Collision':\\\\Mass\ of\ the\ green\ ball=0.2\ kg\\Final\ Velocity\ of\ the\ green\ ball=0\ m/s\\Final\ Momentum\ of\ the\ green\ ball=0\ kg\ m/s\\\\Mass\ of\ the\ pink\ ball=0.3\ kg\\Final\ Velocity\ of\ the\ pink\ ball=v\ m/s\\Final\ Momentum\ of\ the\ pink\ ball=0.3*v=0.3v\ kg\ m/s\\\\Total\ momentum\ of\ both\ the\ balls\ 'After\ Collision'=0+0.3v=0.3v\ kg\ m/s[/tex]
[tex]As\ we\ know\ that,\\Through\ the\ law\ of\ conservation\ of\ momentum,\\In\ an\ isolated\ system:\\Total\ Momentum\ Before\ Collision=Total\ Momentum\ After\ Collision\\Hence,\\1.6=0.3v\\v=\frac{1.6}{0.3}=5.33\ m/s[/tex]
How fast should a rocket ship move for its mass to be dilated to 167% of its rest
mass?
Answer:
The two forces acting on rockets at the moment of launch are the thrust upwards and the weight downwards. Weight is the force due to gravity and is calculated (at the Earth’s surface) by multiplying the mass (kilograms) by 9.8.The resultant force on each rocket is calculated using the equation resultant force = thrust – weight.
Hopefully, this answer helps you! :)
How fast, in meters per second, does an observer need to approach a stationary sound source in order to observe a 7.1 % increase in the emitted frequency?
Answer:
v0 = 24.42 m/s (Approx)
Explanation:
Given:
Increase in frequency = 7.1% =
Computation:
Assume n = 100%
n1 = [(v+v0)/(v+v1)]n
[100 + 7.1] = [(344+v0)/(344+0)]100
107.1 = [(344+v0)/(344)]100
v0 = 24.42 m/s (Approx)
The agonist in a movement is the muscle that provides the major force to complete the movement
(A)True
(B)False
A circular wire loop lies inside a region of space containing a magnetic field. The direction of the magnetic field is out of the screen and parallel to the central axis of the loop. The magnitude of the magnetic field increases as a function of time. A circular loop oriented parallel to the plane of the screen lies inside a region containing magnetic field B. The field is directed out of the screen and is increasing. What is the direction of the induced current in the loop
Answer:
clockwise
Explanation:
According to the law given by Lenz, known as the Lenz law, it is said that a current induced in the circuit which is due to the change in the magnetic field and is so directed so as to oppose the change in the flux and to apply a force in the opposite direction if the force.
Here, as the magnetic field is directed out of the screen, the current flows in the direction which is clockwise in the loop and it opposes the increasing magnetic field.
The clockwise induced current will produce magnetic field in to the screen.
a 2 kg block is attached to a horizontal ideal spring with a spring constant 200N/m. when the
give an example of a normal force. type below.
Normal force is the force exerted when an object is on an surface. So an example could be a pile of books on top of a table.
what are the importance of informal education?
Answer:
Informal education is important because it can help individual to learn how to react and control situations.
It help individual to improve on its existing knowledge, new skills or ideas. This kind of education can happen any where and it can add values to the learner.
Explanation:
Informal education is a type of education that is learned from different life experiences, happenings outside a structured curriculum.
Informal education is important because it can help individual to learn how to react and control situations.
It help individual to improve on its existing knowledge, new skills or ideas. This kind of education can happen any where and it can add values to the learner.
A small, 300 g cart is moving at 1.10 m/s on an air track when it collides with a larger, 4.00 kg cart at rest. After the collision, the small cart recoils at 0.890 m/s. What is the speed of the large cart after the collision (answer in m/s please)?
Answer:
0.0158m/s
Explanation:
Using the law of conservation of energy which states that the sum of momentum before collision is equal to the sum after collision. It is expressed mathematically as;
m1u1 + m2u2 = m1v1 + m2v1
m1 and m2 are the masses of the object
u1 and u2 are the initial velocities
v1 and v2 are the final velocities
Given
m1 = 300g = 0.3kg
u1 = 1.10m/s
m2 = 4.00kg
u2 = 0m/s (at rest)
v1 = 0.890
v2 = ?
Substitute the given values into the formula;
0.3(1.10) + 0 = 0.3(0.89) + 4v2
0.33 = 0.267 + 4v2
0.33-0.267 = 4v2
0.063 = 4v2
v2 = 0.063/4
v2 = 0.0158m/s
Hence the speed of the large cart after the collision is 0.0158m/s
According to the question:
Mass,
[tex]m_1 = 300 \ g = 0.3 \ kg[/tex][tex]m_2 = 4.00 \ kg[/tex]Final velocity,
[tex]u_1 = 1.10 \ m/s[/tex][tex]u_2 = 0 \ m/s[/tex]Initial velocity,
[tex]v_1 = 0.890 \ m/s[/tex][tex]v_2 = \ ?[/tex]By using the law of conservation, we get
→ [tex]m_1 u_1 +m_2 u_2 =m_1 v_1 +m_2 v_1[/tex]
By substituting the values, we get
→ [tex]0.3(1.10)+0 = 0.3(0.89)+4v_2[/tex]
→ [tex]0.33=0.267+4 v_2[/tex]
[tex]0.33-0.267 = 4 v_2[/tex]
[tex]0.063 =4v_2[/tex]
[tex]v_2 = \frac{0.063}{4}[/tex]
[tex]= 0.0158 \ m/s[/tex]
Thus the response above is appropriate.
Learn more about speed here:
https://brainly.com/question/14478313
Use the image below to answer the question.
What does the arrow 'B' represent?
Question 7 options:
wavelength
refraction
frequency
compression
From the anatomical position, the digits are ____ to the brachium.
A. Anterior
B. Inferior
C. Superior
D. Medical
What kind of electricity does turning wheel generates? Please help!
Answer: Kinetic Energy to Electrical.
Explanation: The magnet is rotated as a result of the spinning wheels, and this results in a powerful stream of electrons, therefore converting kinetic to electrical.
which model best represents a pattern
Answer:
A
Explanation:
A 300 g bird flying along at 6.0 m/s sees a 10 g insect heading straight toward it with a speed of 30 m/s. the bird opens its mouth wide and enjoys a nice lunch. What is the bird's speed immediately after swallowing?
Answer:
6.77m/s
Explanation:
Using the law of conservation of momentum
m1u1 + m2u2 = (m1+m2)v
m1 and m2 are the masses of the object
u1 and u2 are the velocities before collision
v is the final collision
Given
m1 = 300g = 0.3kg
u1 = 6.0m/s
m2 = 10g = 0.01kg
u2 = 30m/s
Required
The bird's speed immediately after swallowing v
Substitute the given values into the formula
m1u1 + m2u2 = (m1+m2)v
0.3(6) + 0.01(30) = (0.3+0.01)v
1.8+0.3 = 0.31v
2.1 = 0.31v
v = 2.1/0.31
v = 6.77m/s
Hence the bird's speed immediately after swallowing is 6.77m/s