During a car accident on the NJ Turnpike, the airbags deploy. A 79 kg passenger traveling at 32 m/s makes impact with the airbag over a time of 0.25 seconds. What
was the impact force experienced by the passenger?

Answers

Answer 1

Hi there!

Recall that:

Impulse = Δ in momentum = mΔv

Impulse = Force · time

Begin by calculating the change in momentum, or impulse.

I = mΔv = m(vf - vi)

I = (79)(0 - 32) = -2528 Ns

Now, we can use the equation relating force and time to impulse.

I = Ft

Rearrange for time:

I/F = t

-2528/0.25 = -10112 N

**OR, if magnitude ⇒ |-10112| = 10112 N


Related Questions

A 70 kg man is running up the stairs which is 3m high in 2s.(a)How much work is done by the man?(b)What is the power exerted by the man? (Use g = 10ms 2)​

Answers

Explanation:

m = 70 kg

s = 3m

t =2s

g = 10 m/s²

(a)How much work is done by the man?

W = Fs

= mg X s

= 70 x 3 x 10

= 210 x 10

= 2100 Joule

(b)What is the power exerted by the man?

P = W/t

= 2100/2

P = 1050 Watt

Avery is experimenting with a simple circuit. She measures the current in the circuit three different times with a different battery each time. First, she uses a 1.5-volt battery. Next, she uses a 3-volt battery. Last, she uses a 9-volt battery. The resistance stays the same during each test. How did the current change for each test? Explain.

Answers

Answer: the current increases with each 3 volt and 9 volt. The relationship between resistance and current in a circuit is that the greater the resistance the less the current and the greater the current the less the resistance is. yayayay I could answer this I big brain :)

Which combination of three concurrent forces acting on a body could not produce equilibrium?
1
1 N, 3N, EN
2
2 N, 2N, 2N
.
3.
3 N, 4N, EN
4.
4N, 4N, 5N

Answers

All the three concurrent forces acting on a body will not produce equilibrium.

The given parameters:

1. 1 N, 3 N and 5 N

2. 2N, 2N and 2 N

3. 3N, 4N and 5 N

4. 4N, 4N and 5 N

Concurrent forces lie on the same plane and their line of action pass through a common point.

A body under concurrent forces is in equilibrium if the resultant of the forces on the body is zero.

[tex]\Sigma F = 0\\\\F_1 + F_2 + F_3 = 0\\\\F_1 + F_ 2 = - F_3[/tex]

where;

[tex]F_3[/tex] is the equilibrant force

First set of concurrent forces;

[tex]1 \ N \ + \ 3\ N = 4 \ N\\\\F_ 3 = 5 \ N\\\\5 \ N > 4 \ N[/tex]

Second set of concurrent forces;

[tex]2 \ N \ + \ 2 \ N = 4 \ N\\\\F_ 3 = 2 \ N\\\\4 \ N > 2 \ N[/tex]

Third set of concurrent forces;

[tex]3 \ N \ + \ 4 \ N = 7 \ N\\\\F_ 3 = 5 \ N\\\\7 \ N > 5 \ N[/tex]

Fourth set of concurrent forces;

[tex]4 \ N \ + \ 4 \ N = 8 \ N\\\\F_ 3 = 5 \ N\\\\8 \ N > 5 \ N[/tex]

Thus, we can conclude that all the three concurrent forces acting on a body will not produce equilibrium.

Learn more about concurrent forces here: https://brainly.com/question/20165540

Physical Science A 2021-2022
Why does increasing the number of trials increase confidence in the results of the experiment?

Answers

Answer:

Increasing the number of trials reduces the impact of any one imprecise measurement. … To increase the number of attempts, you can find an average result for the experiment, as well as find and discrepancies as human error if you perform an experiment several times.

Explanation:

hope it helps :)

Answer:

It is because the increase in the number of trials reduces the impact of any one imprecise measurement. Using an average value for data points provides a better representation of the true value.

I need help with this question!

Answers

Answer:

Explanation:

Conservation of momentum

In the x direction

2(15) + 2(-10) = 2(-5) + 2(vBfx)

vBfx = 10 m/s

In the y direction

2(30) + 2(5) = 2(20) + 2(vBfy)

vBfy = 15 m/s

vBf = 10i + 15j

KEi = ½(2)(15² + 30²) + ½(2)(-10² + 5²) = 1250 J

KEf =  ½(2)(-5² + 20²) + ½(2)(10² + 15²) = 750 J

KEf - KEi = 750 - 1250 = -500 J

A block of wood
wood, with mass 1.34 kg rests stationary
on horizontal ground.
The coefficient of Kinetic
friction between the block and the ground is 0.966.
A bullet, with mass 0.250kg, moving horizontally
hits and sticks into the block of wood. We find
that the speed of the block of wood, with the
ballet embedded in it, just after collision is 11.9 m/s.
A) calculate the speed of the bullet before hitting the block of wood.
it, just after the collision
is 11-9mis.
as calculate the speed of the bullet before
s
hitting the block of wood.

Answers

Answer:

Explanation:

conservation of momentum

m(u) + M(0) = (m + M)v

u = (m + M)v/m

u = (0.250 + 1.35)(11.9) / 0.250

u = 76.16

u = 76.2 m/s

That's a fairly massive, and slow, bullet.

13) What property of matter would be measured with this piece of equipment?
A) The mass of an apple
hing
)
By the temperature of a room
The volume of water in a glass.
D) The length of a piece of string.

Answers

Answer:

a

Explanation:

i took the test 100%

i need help with the problem below

Answers

Answer:

Explanation:

a) F = ma

a = F/m

a = 9(800) / 1 x 10⁹ = 7.2 x 10⁻⁶ m/s

b) t = v/a

t = 200 / 7.2 x 10⁻⁶

t = 2.8 x 10⁷ s       about 10½ months

c) v² = u² + 2as

s = (v² - u²) / 2a

s = (200² - 0²) / (2( 7.2 x 10⁻⁶))

s = 2.8 x 10⁹ m    nearly 7 times around the earth

And all this assumes NO FRICTION.

5. Layer of Earth consisting of crust & upper layer of mantle ________

Answers

Answer:

lithosphere

Explanation:

hope this helps you!!

esse is swinging Miguel in a circle at a tangential speed of 3.50 m/s. If the radius of the circle is
0.600 m and Miguel has a mass of 11.0 kg, what is the centripetal force on Miguel? Round to the nearest whole number.

Answers

Answer:

Explanation:

F = mv²/R

F = 11.0(3.50²)/0.600 = 225 N

g A 24-gg bullet strikes and becomes embedded in a 1.50-kgkg block of wood placed on a horizontal surface just in front of the gun. Part A If the coefficient of kinetic friction between the block and the surface is 0.23, and the impact drives the block a distance of 9.5 mm before it comes to rest, what was the muzzle speed of the bullet

Answers

The muzzle speed of the bullet before the collision is 415.3 m/s.

The given parameters:

Mass of the bullet, m₁ = 24 gMass of the wood, m₂ = 1.5 kgCoefficient of kinetic friction, μk = 0.23Distance traveled by the block before stopping, d = 9.5 m

Apply the principle of work-energy theorem to determine the final velocity of the block-bullet system;

[tex]F_f \times d = \frac{1}{2} mv^2\\\\\mu_k F_n \times d = \frac{1}{2} mv^2\\\\\mu_ k (m_1 + m_2)g \times d = \frac{1}{2} (m_1 + m_2)v^2\\\\\mu_k g \times d= \frac{1}{2} v^2\\\\2\mu _k gd = v^2\\\\v= \sqrt{2\mu _k gd } \\\\v = \sqrt{2 \times 0.23 \times 9.8 \times 9.5} \\\\v = 6.54 \ m/s[/tex]

Apply the principle of conservation of linear momentum to determine the muzzle speed of the bullet;

[tex]m_1 u_1 \ + \ m_2u_2 = v(m_1 + m_2)\\\\0.024(u_1) \ + \ 1.5(0) = 6.54(0.024 + 1.5)\\\\0.024u_1 = 9.967\\\\u_1 = \frac{9.967}{0.024} \\\\u_1 = 415.3 \ m/s[/tex]

Thus, the muzzle speed of the bullet before the collision is 415.3 m/s.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

while spinning in a centrifuge a 70.0 kg astronaut experiences an acceleration of 5.00 g, or five times the acceleration due to gravity on the earth. what is the centripetal force acting on her

Answers

Answer:

Explanation:

70.0(5.00)(9.81) = 3,433.5 = 3430 N

To solve this we must be knowing each and every concept related to  centripetal force and its calculations. Therefore, the centripetal force acting on her is 3430 N.

What is centripetal force?

The term centripetal relates to a propensity to gravitate toward the center. Centripetal refers to moving in the direction of the center. The force that maintains an item moving in a circular direction and helps it stay on the path is referred to as centripetal force.

Furthermore, centrifugal force is indeed the tendency of things to deviate from a circular route and fly in a straight line. People frequently confuse centripetal force with centrifugal force.

Mathematically,

F = m a

  = 70 acceleration

  = 70 × 5 × 9.81

 = 3430 N

Therefore, the centripetal force acting on her is 3430 N.

To know more about  centripetal force, here:

https://brainly.com/question/14249440

#SPJ5

How large is the tension in a rope that is being used to accelerate a 100 kg box upward at 2m/s2?

Answers

m=100kgAcceleration=2m/s^2

[tex]\\ \sf\Rrightarrow T=F[/tex]

[tex]\\ \sf\Rrightarrow T=ma[/tex]

[tex]\\ \sf\Rrightarrow T=100(2)[/tex]

[tex]\\ \sf\Rrightarrow T=200N[/tex]

How many joules of energy does a 100-watt light bulb use per hour? How fast would a 70-kg person have to run to have that amount of kinetic energy?

Answers

Answer:

*1) 100 Joule energy

*2) 101.2 m/s

Explanation:

*1) 1J = 1w

100J = 100w

*2) A 70-kg person will have to run at a speed of 101.2 m/s to have that amount of kinetic energy.

hey if you talk to me i will mark you as a brainliest and if you answer all my question
huh huh huh ​

Answers

Answer:

what will happen if i will answer ur questions?

Explanation:

is there gonna be a bad thing or a good thing

A car is moving north on a freeway. If a bug is flying south on the freeway, is the momentum of the bug positive or negative?
Neither

Positive


Negative


Can be both depending on the weather

Answers

Negative

Because the car is moving up and the bug is moving down. but it also depends on the weather so choice between one of those two I think is Negative but I may be wrong.

That’s easy please tell me!

Answers

Uhh 3 seconds? i think

Explain how the removal of heat energy affects the speed of the particles in a substance

Answers

Answer:

The removal of heat energy slows the speed of particles

Explanation:

When you add heat to a substance, the heat energy gets transferred to kinetic energy, and the molecules began to move a greater distance at a greater speed. When you remove heat, the opposite happens.

(c) It is suggested that one side of the copper sheet cools to a lower temperature than the
other side.
Explain why this does not happen.
[2]

Answers

Answer:

Explanation:

The word "sheet" implies that the copper is quite thin.

Copper is also a very good conductor of heat.

Therefore, with a very short heat flow distance to cover and a high rate of heat transmission, temperature differences on either side of the sheet are almost instantaneously eliminated by heat flow.

12- Calculate the power when a force of 60N moves an object over a distance of 0.6 km in 20

minutes

A. 100watts

B. 6,000 watts

C. 0.25watts

D. 30 watts

Answers

Hi there!

To solve, we must begin by calculating the total WORK done on the object.

W = F · d (Force · displacement)

Plug in the given values. Remember to convert km to m:

1 km = 1000 m

0.6 km = 600 m

W = 60 · 600 = 36000 J

Now, we can solve for power:

P = W/t

Convert minutes to seconds:

1 min = 60 sec

20 min = 1200 sec

P = 36000/1200 = 30 W ⇒ Choice D.

Would it be possible to predict the speeds that a coaster will reach before it’s ever placed on the track?

Answers

Yes, it's possible to predict the speeds that a coaster will reach before it’s

ever placed on the track.

This is usually calculated with the potential energy which is

Potential energy = m g h

where m is mass, g is acceleration due to gravity and h is height.

The given formula above is used in predicting the speeds that a coaster will

reach before it’s ever placed on the track.

Read more about Speed here https://brainly.com/question/14298262

A body with a uniform acceleration travels distances of 24m and 64m during the first two equal consecutive intervals of time, each of duration 4s. Determine the initial velocity and acceleration of the moving body.​

Answers

Answer:

Explanation:

Average velocity in the 24 m interval is 24 / 4 = 6 m/s

Average velocity in the 64 m interval is 64 / 4 = 16 m/s

There is a 4 second interval between the two points where average velocity equals actual velocity

a = Δv/t = (vf - vi) / t = (16 - 6) / 4 = 2.5 m/s²

s = v₀t + ½at²

24 = v₀(4) + ½(2.5)4²

4v₀ = 24 - 20

v₀ = 1 m/s

Not asked for but the velocity at the end of the first segment and beginning of the second segment is 11 m/s and final velocity is 21 m/s

VERY EASY QUESTION FOR HIGH SCHOOL STUDENTS:
Which of the following frequencies would you expect a young person to be able to hear? 500 Hz, 6000 Hz, 25000 Hz, 15 Hz, 15000 Hz ​

Answers

Answer:

Explanation: 6000z

The 0.01 kg marble is dropped from rest at A through the smooth glass tube and accumulate in the basket at C as shown in Figure Q2(b). Determine: i) the velocity of the marble at B ii) the horizontal distance R of the basket from the end of the tube, and iii) the speed at which the marble falls into the basket.​

Answers

Crazy Wally Ok Ok ok hhahahaha

the conduction of heat from hot body to cold body is an example of what thermodynamics process?

Answers

Answer:

Heat flow

Explanation:

refers to a fear of being trapped in a crowded, public place.

Answers

Answer:

Agrophobia

Explanation:

an anxiety disorder in which someone feals anxious and scared in a public place

A 2.98-kg object oscillates on a spring with an amplitude of 8.05 cm. Its maximum acceleration is 3.55 m/s2. Calculate the total energy.

Answers

Answer:

a = ω^2 A      formula for max acceleration (ignoring sign)

V = ω A         formula for max velocity

V^2 = ω^2 A^2 = a A   from first equation

E = 1/2 M V^2 = 1/2 * 2.98 * 3.55 * .0805 = .426 J

(kg * m/sec^2 * m = kg m^2 / sec^2 = Joule

Can someone help me solve this problems please? It's a physics problem.

Answers

Answer:

i cant see

Explanation:

but im smart

I'm reasking this because I keep getting links not a real answer and I need a proper answer soon please

Answers

Answer:

Adding salt to the water increases the density of the solution because the salt increases the mass without changing the volume very much.

Explanation: the explanation is in a file

Please answer the question in the picture

Answers

To me I would most think the answer is A.
PLEASE GIVE BRAINLIEST!!!
Other Questions
Which algebraic function has a smaller rate of change than the equation?f(x)=2x9 Can someone plz help me? :( Write A paragraph about the benefits of construction. Which theorem would be used to prove the triangles below as congruent? A: HL B: SSS C: ASAD: AAA Question 14 of 25Does this graph show a function? Explain how you know.O A. No; the graph fails the vertical line test.O B. No, there are y-values that have more than one x-value.C. Yes; the graph passes the vertical line test.O D. Yes, there are no y-values that have more than one x-value. How can you create a messages to look like an IMessage? I'm reasking this because I keep getting links not a real answer and I need a proper answer soon please What does // this mean in your code? Under Pericles, how did Athens take a leading role in the Delian League? how many integers between 100 and 999 (inclusive) have distinct digits 100pts if you help me ..and brainleastplease correct me if im wrong Is y=x/10 represent proportional relationship Please help with the steps to get the answer. Thank you.15^(4x-8 )= 1 Which of the following is NOT true about the Union Blockade? A. The intended to prevent troops, supplies, and weapons from entering the CSA B. It was a successful strategy used by the Union, and crushed the economy of the Confederacy C. It allowed the stronger Confederate navy to claim victory over the Union D. It allowed the Union to take control of the Mississippi River, and split the CSA in two The Later Middle Ages7Which of the following was the site of the only victory achieved by the Crusaders in the Second Crusade?OA. ConstantinopleOB. LisbonOC. EphesusODDamascus Please help if its correct I will give brainliest :)(4v5)(v1) Solve for x the equation 6cos^2 x+4sin^2 x=5.Forex 2 question 6 cos square x + 4 sin square x is equal to 5 The act of being loyal and proud of ones country is:a. Citizenshipb. Nationalismc. Sustainabled. Development What composition of rigid motions maps PQR to XZY? A. T r(270, O) B. Rx = 0 T C. T Rx = 2 D. Ry = 2 T What proportion of US women have a height between 62 and 67 inches?