draw a lewis structure for c2cl2 and indicate how many and what types of bonds are present

Answer:

3.25 moles of H2O

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2HCl + Ca(OH)2 —> CaCl2 +2H2O

Now, we can obtain the number of mole H2O produced from the reaction as follow:

From the balanced equation above,

2 moles of HCl reacted to produce 2 moles of H2O.

Therefore, 3.25 moles of HCl will also react to produce 3.25 moles of H2O.

Therefore, 3.25 moles of H2O were produced from the reaction.

Answer:

The thermodynamic parameter which is of significance in this case is the 'Reduction Potential' for molecular bromine which is ~ +1.1 v vs N.H.E. In other words, it is a strong oxidizing agent. The bromine will oxidize sulfur compounds in which the valence of sulfur is lower than six to sulfate.

There are many possible reactions. Here is one possible example:

Na2 S2O3 + 4Br2 + 5 H2O = 2NaHSO4 + 8 HBr

Answer:

because bromine doesn't have a reaction channel on Yootube.

Explanation:

Speaks for itself.

Answer:

d. solar winds

Explanation:

Dr. Tate and Dr. Ramirez are observing solar winds coming from the sun. Solar winds occurs naturally in which the particles such as electrons and photons releases from the surface of the sun into the space. These solar winds moves in the solar system and interact with planets of the solar system. Dr. Tate and Dr. Ramirez are the two well known scientist observing the effects of solar winds that has reached the planet Jupiter.

Answer:

C2H3O2^-(aq) + H^+ —> HC2H3O2

Explanation:

The following equation was given in the question:

Na^+ + C2H3O2^-(aq) + H^+ Cl^- —> Na^+ + Cl^- + HC2H3O2

Now, to obtain the net ionic equation, we simply cancel out the ions common to both side of the equation.

A careful observation of the equation above, shows that sodium ion, Na^+ and chloride ion, Cl^- are common to both side of the equation.

Therefore, to obtain the net ionic equation, we simply cancel out Na^+ and Cl^- from both side of the equation. This is illustrated below:

Na^+ + C2H3O2^-(aq) + H^+ Cl^- —> Na^+ + Cl^- + HC2H3O2

C2H3O2^-(aq) + H^+ —> HC2H3O2

Therefore, the net ionic equation is

C2H3O2^-(aq) + H^+ —> HC2H3O2

Answer:

Explanation:

Anionic polymerization and cationic polymerization are two types of chain growth polymerization reactions which are used to synthesize various types of polymers. Both these reactions have the same reaction mechanism, but the reaction initiator is different. Anionic polymerization reactions are initiated by an active anionic species, whereas the cationic polymerization reactions are initiated by an active cationic species.

hope this helps

plz mark it as brainliest\

Answer:

A.Mid ocean ridge i think

Explanation:

your answer is B my guy

Answer:

FeO(s)+2NaCL(aq)>FeCL2(aq)+Na2O(s)

2 moles of sodium chloride react with 1 mole of iron (II) oxide to give 1 mole of iron (II) chlorine

mole ratio NaCl :FeCl=2:1

mass of FeCl=0.5×450=225g

Explanation:

(

Answer:

Side photo

A small still is separating propane and butane at 135 °C, and initially contains 10 kg moles of a mixture whose composition is x = 0.3 (x = mole fraction butane). Additional mixture (x = 0.3) is fed at the rate of 5 kg mole/hr. The total volume of the liquid in the still is constant, and the concentration of the vapor from the still (xp) is related to x, as follows: Xp = How long will it take for X, to change from 0.3 to 0.35.

Answer: A swimming pool at 40°C is at a lower temperature than a cup of tea at 90°C. However, the swimming pool contains a lot more water. Therefore, the pool has more thermal energy than the cup of tea even though the tea is hotter than the water in the pool.

Explanation: Heat and Temperature do not mean the same thing. ... A swimming pool at 40°C is at a lower temperature than a cup of tea at 90°C. However, the swimming pool contains a lot more water. Therefore, the pool has more thermal energy than the cup of tea even though the tea is hotter than the water in the pool.

Answer:

Total mass =  93.21 gram (Approx)

Step-by-step explanation:

Given:

Atoms of Cl = 6.3 × 10²³

Find:

Amount of AuCl₂

Computation:

Molecules of AuCl₂ = 6.3 × 10²³ / 2 = 3.15 × 10²³

1 mol of AuCl₂ = 6.022 × 10²³ molecules

Number of mol = 3.15 × 10²³ /  6.022 × 10²³

Number of mol  = 0.523 mol

So,

Molar mass of AuCl₂ = 267.87 g/mol

Total mass = 0.348 mol × 267.87 g/mol

Total mass =  93.21 gram (Approx)

Answer:

Explanation:

1. LiBr   -      Lithium bromide

2. Cal₂   - Calcium iodide

3. Al₂0₃  - Aluminium oxide

4. Mg₃N₂  - Magnesium nitride

5. FeCl₂   Ferrous chloride [ Iron(II) chloride ]

6. FeCl₃   Ferric chloride   [ Iron(III) chloride ]

7. Cu₃N₂  Copper nitride

8. Ni₂O₃  Nickel(III) oxide

9. Al(SO4)₃ Aluminium sulphate

10. Ca₃(PO4)₂ Copper phosphate

11. Fe(OH)₂ Iron (II)  hydroxide

12. (NH4)₂S Ammonium sulphide

13. Na₂O   Sodium oxide

14. NH₃     Ammonia

15. SO₄²⁻  Sulphate ion

Answer:

A

Explanation:

The reason it is distillation is due to the fact that we can use distillation to heat the ocean water. As water has a lower boiling point than the salt solution, it evaporates and the salt stays behind.

Answer:

24 atoms makes altogether a molecule of glucose

Answer:

1) high pH is required

2) other ions are precipitated along with the strontium ions

Explanation:

According to the solubility rules all phosphates are insoluble except those of sodium, potassium, and ammonium. This implies that strontium phosphate is insoluble in water. This explains why strontium ions can be precipitated from drinking water supply using phosphate. The main problem with the precipitation of strontium using phosphate is that it usually requires a high pH as the precipitation occurs under very alkaline conditions.

The main reason why the results may not be accurate is that other ions are precipitated along with the strontium such as calcium ions and magnesium ions. This may lead to inaccurate determination of the amount of strontium ions present.

Answer:

Explanation:

The fundamental issue for precipitation of Strontium Phosphate, is that the other metal cations (Calcium, Barium, Iron, and so on.), present in the town water, are likewise encouraged as Phosphate. In this manner, alongside Strontium Phosphate, Phosphates of a few different cations are additionally encouraged. In this way, Strontium Phosphate can't be weighed precisely. This will prompt off base outcomes.  

The response will be Exothermic, if the temperature of response increments.

Answer:

Option D. fluorine-18

Explanation:

The attached photo gives the explanation.

In the attached photo, A zX represent the atom that will undergo beta decay to produce oxygen–18.

After the calculation, A zX was found to be fluorine–18.

Answer:

The answer is option A.

its reactivity

I hope this helps you.

Answer:

A) Reactivity

Explanation:

Reactivity is one of the characteristics of a chemical property. The copper that turned color due to air, has a different chemical composition.

It wouldn't be flammability - even though it is a chemical property, but nothing is burning.

All the other answer choises: mass and volume are physical properties. Basically the PHYSICAL characteristics which doesn't change the composition.

Hope this helps!

Answer:

c.is the answer..not sure...but i think so

Answer:

Explanation:

Synthetic fibres are made using chemicals. Hence they do not require any forest resources like wood. This helps in saving the trees from cutting down. So the production of synthetic fibers helps in the conservation of forests.

Natural fibres on the other hand require forest products like wood for its manufacture.

Hope this helps

plz mark it as brainliest!!!!!!!!!

Answer:

yes, they do help in conservating the forest resources.

Explanation: This is because synthetic fibers like rayon, nylon etc are made from petrochemicals which helps to substitute usage of natural resources like cotton etc. and these synthetic fibers are more durable than natural fibers, which adds to their usage and in turn, helps to conserve forest resources.

Answer:

Mira la explicación.

Explanation:

¡Hola!

En este caso, podemos encontrar facilmente el grupo al que pertenecen dichos elementos con números atómicos 8, 36 y 39 respectivamente mediante su búsqueda en la tabla periódica. Así, z=8 corresponde a oxígeno, z=36 a kriptón y z=39 a itrio.

Por otro lado, para saber el número de capas, debemos desarrollar la configuración electrónica para cada uno:

[tex]O: 1s^2,2s^2,2p^4\\Kr: 1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^{10},4p^6\\Y:1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^{10},4p^6,5s^2,4d^1[/tex]

Con esto, vemos que oxígeno tiene dos capas, kripton cuatro capas e iritrio cinco, a lo que a oxígeno le faltan dos electrones para llenar dicha capa, a kripton ninguno y a iritrio nueve.

Saludos.

Answer:

A. Michael suggests timing each addition of sugar

Explanation:

The experiment is about amount of sugar dissolved at different temperatures. The suggestion of Michael is best suited to record the timing of each addition of sugar. This will enable to record the timing of sugar added in the water and amount of sugar dissolved at the specified temperature.

Answer:the surrounding air

Explanation:

A burner at the sanem temperature would not receive a flow of heat, a pan heated to 100 degrees will transfer heat to the stovetop, and hotter water inside a pan will not take the heat either because it is hotter. the surrounding air is colder and will take heat from the burner

Answer:

surrounding air

Explanation:

taking test too

Answer:

that by living near the poles, people might be able to survive on Mars

Explanation:

Answer:

79.8%

Explanation:

Percentage yield = actual yield / theoretical yield x 100%

Percentage yield = 220.0 / 275.6 x 100%

=79.8%

The percent yield of of ferrous sulfide if the actual yield is 220.0 g and the theoretical yield is 275.6 g is 79.8%.

Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.

In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.This condition arises when there are other simultaneous reactions taking place leading to the formation of product. It can also arise if there is incomplete removal of impurities from the sample .

In the given example, percent yield can be found out by substituting values in mentioned formula. percent yield,=220/275.6×100=79.8%.

Learn more about percent yield,here:

https://brainly.com/question/2506978

#SPJ5

Answer:

121.67 g is to be added to 500 g of water

Explanation:

Given that:

Pressure = 750 mmHg

Temperature T₁= 99.63⁰C = (273 + 99.63 ) = 372.63K

mass of water = 500 g

Temperature T₂  = 100⁰C = ( 273 + 100) K = 373 K

where;

Kb for water 0.52 K Kg mol-1

For sucrose; C₁₂ H₂₂ O₁₁

Molar mass =  ( 12 × 12 )+ ( 1 × 22 ) + ( 16 × 11 )

Molar mass = 342 g/mol

ΔT = T₂  - T₁

ΔT = (373 - 372.63)K

ΔT = 0.37 K

∴ the amount of sucrose to be added to  500 g of water is:

 [tex]= \dfrac{0.37\times 342 \times 500}{0.52 \times 1000 }[/tex]

[tex]= \dfrac{6327}{52}[/tex]

= 121.67 g

Thus; 121.67 g is to be added to 500 g of water

Answer:

C

Explanation:

plum- pudding atomic model is an atom that had a positively charged medium, or space, with negatively charged electrons inside the medium.

The correct answer is (A) A description of atoms being balls of positive charge with electrons scattered outside.

Option (A) is correct because the atom was a sphere of positive charge with negatively charged electrons scattered around the atom like plums in a pudding.

So , Rest  options that are B , C and D are incorrect.

Learn more about Plum pudding model below

https://brainly.com/question/15126038

#SPJ2

Answer:

Place the reactants in a smaller container.

Explanation:

If you were to reduce the source of heat, the hydrogen and oxygen molecules would lose their kinetic energy, resulting in less collisions.

_______________________________________________________

Maintaining the same temperature of the reactants, the speed would neither increase nor decrease as temperature is directly proportional to the kinetic energy of the molecules, which in turn is directly proportional to the number of collisions. However, placing the reactants in a smaller container would result in less volume, and hence the molecules would collide with one another more often!

Hope that helps!

The primary requirement of a reaction to occur is that the reactant particles must collide and interact with each other in some way. Place the reactants in a smaller container which speed up the collisions between hydrogen and oxygen molecule. The correct option is C.

The collision theory states that the rate of a chemical reaction is proportional to the number of collisions between the reactant molecules. The more often reactant molecules collide, the more often they react with one another and faster will be the reaction rate.

If we reduce the source of heat, the hydrogen and oxygen molecules would lose their kinetic energy, resulting in less collisions. The temperature is directly proportional to the kinetic energy of the molecules, which in turn is directly proportional to the number of collisions.

If we place the reactants in a smaller container it would result in less volume, and hence the molecules would collide with one another more often.

Thus the correct option is C.

To know more about collision, visit;

https://brainly.com/question/24616147

#SPJ7

Answer:

Element x has an atomic number of 16, it is sulphur.

Element Y has an atomic number of 20, it is calcium.

i) Sulphur is in Group VI, period 3 in the modern periodic table,

whereas calcium is in Group II, period 4 of the modern periodic table.

ii) Ionic bonds will form between them. This is because metals and non-metals (Cacium and sulphur) usually form ionic compounds where between the ions are held by ionic bonds (which are transferred electrons so that both elements can attain a stable status).

iii) CaS

each Calcium atom can lose 2 electrons to attain 8 outermost shell electrons, while each sulphur atom can gain the 2 electrons to attain 8 outermost shell electrons, where they will most be stable (octet). Hence, the atomic ratio of Ca and S is 1:1.

i) The element with atomic number 16 is sulfur present in group 16 and period 3rd and the element with atomic number 20 is calcium present in group 2 and period 4th.

ii) The ionic bond formed between them.

ii) The chemical formula of the compound will be CaS.

Ionic compounds can be described as crystalline solids formed by closely packed ions of opposite charge. An Ionic compound is generally formed when metal reacts with non-metal.

In ionic compounds, the ions are commonly held together by ionic bonds. The ions are formed by gaining or losing electrons in order to achieve their nearest noble gas configuration.

In a reaction, the metals usually lose electrons to complete their octet while non-metals will gain electrons to complete their octet.

The given element calcium is a metal with a valency of +2 and sulfur is a non metal with a valency of -2. Therefore, they form an ionic compound with the chemical formula CaS.

Learn more about ionic compounds, here:

https://brainly.com/question/17217225

#SPJ2

Answer:

4,768.57

Explanation:

If you are asking us to calculate, your answer is above. Easiest and fastest way is to plug it into the calc.

Answer:

Shifting their growing range towards the equator

Explanation:

Maybe will be like that

Answer:

Ability to store water in leafy structures to prevent excess evaporation.

Explanation:

The reason why plants die in hot temperature is the excess evaporation of water, so to prevent the excess evaporation of water, the plants get adaptive to store water in their leaves.

Hope it helps.

Answer:

Increase in the color intensity and hence the concentration of the reacting species increases the rate of the reaction according to collision theory

Explanation:

The given parameters are;

Rate of reaction of metal strip in light blue solution lesser than rate  of reaction of the metal strip in dark blue solution

Therefore, the color of the solution derives from the concentration of the reacting species involved in the reaction.

The increase in the darkness of the blue solution stems from the increase in the concentration of the reacting species which according to collision theory increases the fraction of the effective collisions, thereby increasing the reaction rate.

Answer:

hydrocarbon

Explanation:

these are called hydrocarbons