Answer:
I don't know if these are all right but these are my best answers. good luck and I hope you do well.
1. true
2. true
3. false
4. true
5. true
6. true
7. true
8. true
9. false
10. false
13. it stimulates the heart through chest compressions
14. on bare skin upper right shoulder and lower left ribs
15. no CPR
Explanation:
26. How many covalent bonds does water have?
a.1 b.2 c.3 d.4 e.5
Answer:
(b) 2
Explanation:
What determines the
carrying capacity in an
ecosystem?
A. The number of different species in
the ecosystem
B. Limiting factors
C. Only biotic factors
D. Only abiotic factors
Answer:
Your answer is B. Limiting factors
Explanation:
Brainliest pleaseeee
How do scientists use patterns?
A. To organize results
B. To describe how something is made
C. To predict what might happen next
D. To send messages to other scientists
Answer:
c because you see with your eyes and c rhymes with eyes
What should food workers do to prevent chemical hazards from contaminating food?
A. Wash their hands after taking out the garbage
B. Wear a hair net when working for food preparation areas
C. Store cleaning solutions and bottles away from food storage areas
D. Clean and San at is equipment and utensils for after hours of continuous use
In an example food chain, mice only eat plants, and then snakes eat the mice. These snakes are examples of consumers.
a Quaternary
b Primary
c Secondary
d Tertiary
A 0.15-m straight wire moves with a constant velocity of 7.0 m/s perpendicularly
through a magnetic field. If the magnetic field has a strength of 0.40 T, what is the
electromotive force?
Answer: force is 0.42 N
Explanation: F = l·v·B
When solar energy is converted to thermal energy, how is the thermal energy used? Check all that apply.
to provide air conditioning
to cool refrigerators
to heat spaces in buildings
to heat water
Answer:
to heat spaces in buildingss
Explanation:
Which of the following is true about the diameter of a circle?
A. The diameter is twice the length of the radius.
B. The diameter is twice the length of the circumference.
C. The diameter is half the length of the circumference.
D. The diameter is half the length of the radius.
Answer:
option A
Explanation:
the diameter is twice the length of the radius
hope it helps
Fill in the blanks to complete each statement about energy in Earth’s crust. (use lower case wording only)
Plate movements on Earth’s crust create
.
This adds energy to the crust, which then bends and breaks, forming
.
Answer:
stress and fault
Explanation:
yes
Answer:
Stress for the first one and the second faults
Explanation:
A new piece of exercise equipment has been added to your gym, and you try it out. To use this machine, you lie horizontal on a mat with your feet against a platform perpendicular to the mat. The platform is held by a stiff spring that is compressed when the platform moves. Your workout invovles compressing the spring by pushing on the platform with your feet. After testing compressions of the equipment, you determine that you must do 85.0 J of work to compress the spring a distance 0.170 m from its uncompressed length.What magnitude of force must you apply to hold the platform stationary at the final distance given above
Answer:
500 N
Explanation:
Since the work done on the spring W = Fx where F = force applied and x = compression length = 0.170 m (since the spring will be compressed its full length when the force is applied)
Since W = 85.0 J and we need to find F,
F = W/x
= 85.0 J/0.170 m
= 500 N
So, the magnitude of force must you apply to hold the platform stationary at the final distance given above is 500 N.
2. A child swings back and forth on a swing with no friction or air resistance between points X and Z, as shown. Point Y is the lowest point in the swing, where height is zero. Which of the following is equal to the kinetic energy of the child at point Y?
(A) The kinetic energy of the child at point X.
(B) The kinetic energy of the child at point Z.
(C) The potential energy of the child at point Y.
(D) The potential energy of the child at point Z.
Answer:
c
Explanation:
if a car exerts a area of 3m and a force of 9N what is the pressure exerted by car
Answer:
P = 3 Pa
Explanation:
Given that,
Force exerted by the car, F = 9 N
The area of the car, A = 3 m²
We need to find the pressure exerted by the car. We know that pressure is equal to the force per unit area such that,
[tex]P=\dfrac{F}{A}\\\\P=\dfrac{9\ N}{3\ m^2}\\\\P=3\ Pa[/tex]
So, the pressure exerted by the car is equal to 3 Pa.
6. Calculate the pressure exerted on an elevator floor which has an
area of 6 m², if 20 people whose combined force is 1500 N are
standing on it.
Answer:
Hope this helps you out if you could please leave 5 stars or brainiest thank you
You have two rocks made of the same material that are at the same
temperature. The first rock has three times the mass of the second rock. How
does the thermal energy of the two rocks compare?
A. The second rock has three times the thermal energy of the first rock
B. The first rick has six times the thermal energy of the second rock
C. The second rock has one-third as much thermal energy as the first rock
D. The rocks have the same amount of thermal energy
Answer:
the rocks have the same amount of thermal energy
water flows in a pipe of a terminal of A1=0.02 m2 with a speed of V1=2 m/s. At the second end of the pipe A2=0.04 m2, the speed of flow is V2=_______m/s
For a system mass of 600g and a hanging weight of 0.50 N, determine the acceleration of the system
Answer:
A=0.80
Explanation:
a=2×100/time^2. a=2×100/15.86^2. = a=0.80
The acceleration of the system will be 0.833 meters per second square.
What is newton's second law?The behavior of things is predicted by Newton's first rule of motion when all external forces are equal. The first law, sometimes known as the law of inertia, asserts that if an entity's energies are balanced, its acceleration will be zero meters per second.
When all forces are balanced, an object is said to be in equilibrium and won't accelerate. Newton postulated that an item will only accelerate in the presence of a net or uneven force. An object will accelerate if there is an imbalanced force present, altering its direction, speed, or both.
Let 'm' be the mass of the object in kilogram and 'a' is the acceleration of the object in meters per second square. Then the force on the system is calculated as,
F = ma
For a system mass of 600g and a hanging weight of 0.50 N. Convert the mass of the object into kilogram. Then we have
m = 600 / 1000
m = 0.6 kg
Then the acceleration of the system will be calculated as,
0.50 = 0.6 × a
a = 0.833 meters per second square
The acceleration of the system will be 0.833 meters per second square.
More about newton's second law link is given below.
https://brainly.com/question/13447525
#SPJ2
A disk 7.90 cm in radius rotates at a constant rate of 1 190 rev/min about its central axis. (a) Determine its angular speed. 124.58 Correct: Your answer is correct. rad/s (b) Determine the tangential speed at a point 2.98 cm from its center. 3.71 Correct: Your answer is correct. m/s (c) Determine the radial acceleration of a point on the rim. magnitude 1.23 Correct: Your answer is correct. km/s2 direction toward the center Correct: Your answer is correct. (d) Determine the total distance a point on the rim moves in 2.06 s. 20.28 Correct: Your answer is correct. m
Answer:
[tex]124.62\ \text{rad/s}[/tex]
[tex]3.71\ \text{m/s}[/tex]
[tex]1.23\ \text{km/s}^2[/tex]
[tex]20.28\ \text{m}[/tex]
Explanation:
r = Radius of disk = 7.9 cm
N = Number of revolution per minute = 1190 rev/minute
Angular speed is given by
[tex]\omega=N\dfrac{2\pi}{60}\\\Rightarrow \omega=1190\times \dfrac{2\pi}{60}\\\Rightarrow \omega=124.62\ \text{rad/s}[/tex]
The angular speed is [tex]124.62\ \text{rad/s}[/tex]
r = 2.98 cm
Tangential speed is given by
[tex]v=r\omega\\\Rightarrow v=2.98\times 10^{-2}\times 124.62\\\Rightarrow v=3.71\ \text{m/s}[/tex]
Tangential speed at the required point is [tex]3.71\ \text{m/s}[/tex]
Radial acceleration is given by
[tex]a=\omega^2r\\\Rightarrow a=124.62^2\times 7.9\times 10^{-2}\\\Rightarrow a=1226.88\approx 1.23\ \text{km/s}^2[/tex]
The radial acceleration is [tex]1.23\ \text{km/s}^2[/tex].
t = Time = 2.06 s
Distance traveled is given by
[tex]d=vt\\\Rightarrow d=\omega rt\\\Rightarrow d=124.62\times 7.9\times 10^{-2}\times 2.06\\\Rightarrow d=20.28\ \text{m}[/tex]
The total distance a point on the rim moves in the required time is [tex]20.28\ \text{m}[/tex].
4) A drag racer starts her car from rest and accelerates at 10.0 m/s² for a distance of 400 m (1/4 mile). (a) How long did it take the race car to travel this distance? (b) What is the speed of the race car at the end of the run?
Answer:
A) s=1/2at^2
t=√(2s/a)=√(2x400)/10.0)=9.0s
B) v=at
v=10.0x9=90m/s
PLEASE HELLP ILL GIVE CROWN AND HEART
Surface currents in major oceans generally circulate in a ________ direction in the northern hemisphere.
A ) Clockwise
B ) Counter-clockwise
C ) Northern
D ) Southern
Answer:
Anti clockwise
hope it helps u
please mark me brailliest
How many joules of heat energy are needed to raise the temperature of 10.0 g (0.0100 kg) of aluminum from 22 K to 55 K, if the specific heat of aluminum is 897 J/kg * K. Explain your answer
Answer:
296.01 J
Explanation:
From the question,
Q = cm(t₂-t₁)....................... Equation 1
Where Q = quantity of heat, c = specific heat capacity of aluminium, m = mass of aluminium, t₁ = Initial temperature, t₂ = Final temperature
Given: c = 897 J/kg.K, m = 0.01 kg, t₁ = 22 K, t₂ = 55 k
Substitute these values into equation 1
Q = 897×0.01×(55-22)
Q = 897×0.01×33
Q = 296.01 J
Hence 296.01 Joules of heat is required.
The public is not yet able to purchase cars powered by hydrogen fuel cells because engineers have to determine how
the cars perform based on which scenario?
O on racetracks
O in real-world conditions
O in flooded environments
O on closed courses
Next
Submit
Save and Exit
return
Answer:
B on EDGE
Explanation:
A seller on the internet claims to have pieces of a wooden statue that are 2000 years old. You are asked to date the wood to see whether the age is correct. The 20g sample you receive has an activity of 15 counts per second. For living wood. 20g would have an activity of 16 counts per second. Estimate the age of the wood and women’s on weather the sellers claims are true
A car drives 30 m north in 1.5 seconds and drives 60 east in 2 seconds. What is the average velocity
Answer:
19.2 m/s
Explanation:
From the question,
Velocity = displacement/time = d/t
V = d/t.................................. Equation 1
Average velocity = Total displacement/ total time
Total dispalcement = √(30²+60²) = √4500 = 67.08 m
Total time = 1.5+2 = 3.5 s.
Substitute these value into equation 1
V = 67.08/3.5
V = 19.2 m/s.
Hence the average velocity is 19.2 m/s
The parameter given for the car during transit is 30 m north in 1.5 seconds and drives 60 east in 2 seconds, we want to find the average velocity.
average velocity is 19.2 m/s
Solution
The expression for Average velocity is
Average velocity = Total Displacement/ Total time Taken...............Eqn 1
Total Displacement = √(30²+60²) = √4500 = 67.08 m
Total time = 1.5+2 = 3.5 s.
From the Equation 1
Average Velocity = 67.08/3.5
V = 19.2 m/s.
Therefore, the average velocity is 19.2 m/s
Learn more about average velocity :
https://brainly.com/question/24739297
What happens to the force between two charges when each charge is doubled and the distance between them is 1/4 its original
magnitude?
Answer:
F' = 64 F
Explanation:
The electric force between charges is given by :
[tex]F=\dfrac{kq_1q_2}{r^2}[/tex]
Where
q₁ and q₂ are charges
r is the distance between charges
When each charge is doubled and the distance between them is 1/4 its original magnitude such that,
q₁' = 2q₁, q₂' = 2q₂ and r' = (r/4)
New force,
[tex]F'=\dfrac{kq_1'q_2'}{r'^2}[/tex]
Apply new values,
[tex]F'=\dfrac{k\times 2q_1\times 2q_2}{(\dfrac{r}{4})^2}\\\\=\dfrac{k\times 4q_1q_2}{\dfrac{r^2}{16}}\\\\=64\times \dfrac{kq_1q_2}{r^2}\\\\=64F[/tex]
So, the new force becomes 64 times the initial force.
How do you increase mechanical energy
Answer:
If an object moves in the opposite direction of a conservative net force, the potential energy will increase; and if the speed (not the velocity) of the object changes, the kinetic energy of the object also changes.
Explanation:
Hope i explained that clearly... :)
The reason that worlds like the Earth are differentiated is that Group of answer choices the heat of the Sun vaporized much of their solid material early on the heaviest chunks that hit early on were able to bore through solid rock to the center the continuing impacts on a growing protoplanet eventually melted the entire body large amounts of hydrogen and helium collect around such planets a little later in their history planetesimals with different types of composition hit at different times, with the heaviest ones hitting first
Answer:
A differentiated body is a body that has been heated to the point where it is are further from the sun larger have no solid surface and have many more moons Smaller chunks of material vaporize completely as they pass through its atmosphere
Explanation:
Hope it helps..A body is said to be differentiated when it has been heated to the extent where it is bigger, farther from the sun, has no hard surface, and has a lot more moons. Smaller pieces of the materials entirely evaporate as they pass through their environment.
What is Planet?An enormous, spherical celestial object known as a planet is neither a star nor a remain. The nebular theory, which states that an interstellar cloud collapses out of a nebula to form a young protostar that orbits the sun by a protoplanetary disk, is now the best argument for planet formation. By slowly accumulating material under the influence of gravity, or accretion, planets form in this disk.
The terrestrial planets Mercury, Venus, Earth, and Mars, as well as the planetary nebulae Jupiter, Saturn, Uranus, and Neptune, total at least eight planets in the Solar System. These planets all rotate around axes that seem to be inclined relative to their corresponding polar axes.
To know more about Planet:
https://brainly.com/question/14581221
#SPJ2
A circus stuntman holds himself straight out by his arms from a vertical pole. If the stuntman's center of gravity is located 0.75 m away from the pole and he weights 650 N, how much force do is arms have to apply if they exert their force upwards at 0.10 m away from the pole? [4875 N]
Answer: 4875 N
Explanation:
Given
Stuntman weight is [tex]W=650\ N[/tex]
His center of gravity is located at [tex]x=0.75\ m[/tex] away from pole
If he applies an upwards force at 0.10 m away from the pole
Suppose F is the applied force
To remain vertical, the torque of weight must be canceled by the vertical force
[tex]\Rightarrow 650\times 0.75-F\times 0.10=0\\\\\Rightarrow 650\times 0.75=F\times 0.10\\\\\Rightarrow F=\dfrac{487.5}{0.10}=4875\ N[/tex]
40 g of which substance is saturated in 100 g of water at a temperature of 50°C?
A
KCI
B
Nacl
C
KNO3
D
NH4Cl
please help , its due soon
An arrow is shot at an angle of 35° and a velocity of 50 m/s. How long does it take to return to its original starting height?
Answer:
4.02 s
Explanation:
From the question given above, the following data were obtained:
Angle of projection (θ) = 35°
Initial velocity (u) = 50 m/s
Acceleration due to gravity (g) = 10 m/s²
Time of flight (T) =?
The time of flight of the arrow can be obtained as follow:
T = 2uSineθ / g
T = 2 × 35 × Sine 35 / 10
T = 70 × 0.5736 / 10
T = 7 × 0.5736
T = 4.02 s
Therefore, the time taken for the arrow to return is 4.02 s
If a person perceives that he has some control over his environment, he most likely will handle stress:
a.poorly
b.by retreating from the stress
c.the same as everyone else
d.better than if he doesn't feel in control