Answer:
1
Explanation:
i think but yes
Dogs are derived from wolves. Dogs are very diverse, varying in size from very small to very large. The variety is because of selective breeding. Hence option 1 is correct.
What is selective breeding?Selective breeding is defined as the method by which people pick which male and female animals or plants would reproduce sexually and create offspring together in order to selectively acquire specific phenotypic features. The goal of selective breeding is to produce cattle with desirable features that are strongly heritable and can thus be passed down from generation to generation.
Despite the fact that all dogs are descended from wolves, people have significantly changed the appearance of dogs through the use of artificial selection. Dogs have been bred for various desirable traits for ages, resulting in a vast variety of canines, from the little Chihuahua to the enormous Great Dane.
Thus, dogs are derived from wolves. Dogs are very diverse, varying in size from very small to very large. The variety is because of selective breeding. Hence option 1 is correct.
To learn more about selective breeding, refer to the link below:
https://brainly.com/question/461245
#SPJ2
A motor boat is traveling 10 m/s on a sunny calm day. The driver turns
off the engine. Apply Newton's first law to explain what happens to the
boat as it glides through the water. *
Answer:
If there is no resistance, current, wind, or friction on the boat, the boat would keep moving in the same direction at the same speed.
Explanation:
Newton's First Law of Motion suggests that if no external force acts upon an object, that object would continue moving in the same direction at the initial speed.
However, all objects near the surface of the earth (including the boat in this question) experience the effect of gravitational pull (an external force from the earth.) Because of these external forces, Newton's First Law of motion (when phrased in this way) would not apply to the boat.
It is frequently possible to use a more general version of this statement: if the net force on an object is zero, that object would continue moving in the same direction at the initial speed.
In other words, the object would move in the same direction at the initial speed as long as all the external forces on that object balance each other.
Assume that there is no resistance, current, wind, or friction on the boat. After the engine of the boat is turned off, the following would be the forces on this boat:
downward gravitational attraction from the earth, andupward buoyancy from the water, which counteracts the gravitational attraction on the boat.If the water is sufficiently calm, these two forces would balance one another. The external force on this boat would be zero. Hence, the boat would keep moving in the same direction at the same speed.
The chemical equation, 2 Cr + 3 Fe(NO3)2 - 3 Fe + 2 Cr(NO3)3, is an
example of which type of reaction?*
Answer:
Single replacement reaction (aka single displacement reaction)
Explanation:
In a single replacement reaction, one element is substituted for another in a compound to create a new compound and a new element in the products. The general form is:
A + BC --> B + AC
In the case of this question, Cr and Fe "trade places."
Hydrochloric acid is a ———— ?
A. Strong electrolyte
B. Weak electrolyte
C. Non-electrolyte
D.
E. Molecular compound
Answer:
A is the answer
Explanation:
Pls mark BRAINLIEST
The following table lists the speed of sound in various materials. Use this table to answer the question.
Substance Speed (m/s)
Glass 5,200
Aluminum 5,100
Iron 4,500
Copper 3,500
Salt water 1,530
Fresh water 1,500
Mercury 1,400
Hydrogen at 0°C 1,284
Ethyl Alcohol 1,125
Helium at 0°C 965
Air at 100°C 387
Air at 0°C 331
Oxygen at 0°C 316
Sound travels fastest in _____.
solids
liquids
cold gases
warm gases
Sound travels fastest through solids.
it would be cold gasses because of how air at 0 is faster then at 100
What type of reaction is shown below?
A. hydration reaction
B.addition reaction
what voltage is required to move 2a through 20ω
Answer:
10 volts
Explanation:
V= P/I
V = 20/2 = 10 volts
I neeeedddd hhheeelppppppllsssss
Answer:
I believe that it is the 2nd option.
Explanation:
My reasonings are because C4H10O has 7 isomers. In which 4 are alcohol and the other 3 are ether.
The first option is ethers, specifically ethoxyethane.
The third option is ethers, specifically 1-methoxypropane.
The fourth option is an alcohol, specifically 1- butanol.
Therefore, leads us to the 2nd option that it is NOT an isomer of C4H10O
17.5 mL of 0.1000M NaOH was required to neutralize 25.0 mL of HCl. What was the molarity of the HCl?
Answer: The molarity of [tex]HCl[/tex] is 0.07 M
Explanation:
According to the neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity [tex]HCl[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]HCl[/tex] solution = ?
[tex]V_1[/tex] = volume of [tex]HCl[/tex] solution = 25.0 ml
[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 0.1000 M
[tex]V_1[/tex] = volume of [tex]NaOH[/tex] solution = 17.5 ml
Putting in the values we get:
[tex]1\times M_1\times 25.0=1\times 0.1000\times 17.5[/tex]
[tex]M_1=0.07M[/tex]
Therefore, molarity of [tex]HCl[/tex] is 0.07 M
Which is not synthetic polymer?
a) Teflon
b) PVC
c) Chitin
if a runner decreases his velocity from +20 m/s to +10 m/s what is his average acceleration
Answer:
f a runner decreases his velocity from +20 m/s to +10 m/s, with average acceleration is -5m/s².
Explanation:
The reaction 2KClO3(s) --> 2KCl(s) + 3O2(g) is a(n)
Group of answer choices
combustion reaction.
ionic reaction.
synthesis reaction.
decomposition reaction.
Answer:
decomposition reaction.
Explanation:
It is a decomposition reaction as potassium chlorate compound breaks to form potassium chloride and oxygen. This reaction requires heat as source of energy to break down the compound so it is endothermic in nature.
Will give brainliest!!!!
Answer:
446 mmHg
Explanation:
From the question given above, the following data were obtained:
Total pressure (Pₜ) = 871 mmHg
Partial pressure of He (Pₐ) = 281 mmHg
Partial pressure of N₂ (P₆) = 144 mmHg
Partial pressure of O₂ (P꜀) =?
The partial pressure of O₂ can be obtained as follow:
Pₜ = Pₐ + P₆ + P꜀
871 = 281 + 144 + P꜀
871 = 425 + P꜀
Collect like terms
P꜀ = 871 – 425
P꜀ = 446 mmHg
Therefore, the partial pressure of O₂ in the mixture is 446 mmHg
Which rock type(s) could be transformed into sediment?
a: sedimentary rock
b. igneous rock
c. both rock types
d. neither rock types
Answer:
b!
Explanation:
Answer:
c - both rock types
Explanation:
when weathered and eroded they can become sediments!
The reaction 2Mg(s) + O2(g) --> 2MgO(s) is a
Group of answer choices
double-replacement reaction.
decomposition reaction.
synthesis reaction.
single-replacement reaction.
Answer:
Double-Replacement Reaction
Explanation:
Mg is Oxidized, and O2 is the cause of the oxidation, hence the Oxidizing agent. That means that O2 is Reduced and Mg is the cause naming it the Reducing agent.
OIL - RIG Oxidation is Loss-Reduction is Gain
8. FOR BRAINLIST!!!
Genetic variation describes naturally occurring differences among individuals within
the same population or species. It is based on the differences in the alleles in the
gene pool in a population. These differences--
I think it's either b or c
Aside from direct harm, what secondary issue do invasive species present?
They may be able to eat all kinds of native organisms.
They may not have any predators.
They might damage the habitat that other organisms rely on.
They might introduce other organisms like viruses and bacteria.
Answer:
They may not have any predators.
Explanation:
What is the concentration of chlorine in ppm, in a 2.0L sample of pool water that contains 5.2mg of chlorine. How do I do this problem
Answer: 2.6 ppm
Explanation: ppm is parts per million, also 1:1000 000.
It means 1 mg in 1000 000 mg is same as 1 mg in 1000 g
Assume 2.0 litres weighs 2.0 kg = 2000 g
In one litre there is 2.6 mg Cl. You get a proportion 2.6 mg :1000 g
The concentration of chlorine is 2.6 ppm.
What is concentration?Concentration can be calculated in terms of Parts per million, or ppm, that is a measurement of dissolved solids in solution expressed as a ratio of the count of parts of solids/solute to one million parts of total volume.
The concentration can be calculated by using the formula:
C = m / v
where, C is concentration, m is mass and v is volume.
Calculation of concentration is shown as:
By using the formula, C = m / v
Put the values of m = 5.2 mg and v = 2 L in concentration formula.
C = 5.2 mg / 2 L
C = 2.6 ppm
Therefore, the concentration of solution will be 2.6 ppm.
To know more about concentration click here.
https://brainly.com/question/10725862.
#SPJ2
What is uranium classified as
Akali Metals, Akaline Metals, Metalloids, Halogen, Noble Gas, Transition Metal, Rare Earth Metal or Non-Metal?
SOMEONE PLEASE HELP I NEED THIS NOW PLEASE JUST THIS ONE QUESTION I DON’T KNOW
Answer:
uranium is classifide as actinide a chemical element atomic number 92 and is a solid at room temperature
Science**
5) Which statement best states the relationship between mass and
gravitational attraction between two objects? *
The less mass an object has, the greater its gravitational force.
How many atoms are in 294 g of copper?
Answer
2.1 x 10 ^23
fdxkjns9fhnuvypdsssssssssz89999qewv
Dose Anabolic Reaction helps cells multiply and stay good condition
DO NOT JUST USE UP THE POINTS I WILL REPORT YOU
tell me if your from connexus please with your answer
Which animal is a vertebrate
Fish
crab
shrimp
octopus
Answer:
fish
Explanation:
vertebrate is an animal with a spinal cord surrounded by cartilage or bone ,so example of a vertebrate is fish
1. Goose
2.frog
3. Turkey
4.earthworm
Answer:
Goose
Explanation:
following yes on the key,
feather: yes -> swims
Swims: yes -> goose
Compare and contrast the behavior of the food coloring and the floating pieces of paper before and after adding heat to the system. What caused the changes you observed
Answer:
the answer is c
Explanation:
Answer:
Im doing this rn :0, look at explanation ill try to help
Use different words
Have a great day!
pls give brainliest and hit the heart if this helped :3
Explanation:
The changes I observed are that when you do not use hot water, the food coloring stays at the bottom and doesn't spread to the top, but when I do use food coloring, it spreads everywhere in the water. I don't know what caused the changes I observed, but I think its because heating food coloring does something to it to make it spread, maybe hotter liquids spread faster?
Karl went to the doctor complaining of a sore throat. The doctor performed
a throat culture and determined that antibiotics were not necessary. The
doctor told her to drink tea, take ibuprofen, and rest. Which type of microorganism most likely caused Karl's sore throat?
a) bacteria
b) virus
c) parasite
d) fungi
Answer:
A
Explanation:
bc
understanding coefficients
Answer:
Mg-9
N-6
C-2
O-4
Ca-9
P-6
O-24
Explanation:
A chemist working for Udensi industries wants to create a new ink for tattoos and cosmetics. Determine the theoretical yield of iron (ll) sulfide if the chemist uses 22.5 grams of iron ? Type of rxn : AD , SR, DR , D Type of calculation : mol to mol ; mol to mass ; mass to mols mass to mass Fe S8--> Fes
Answer:
35.36 g
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
8Fe + S₈ —> 8FeS
Next, we shall determine the mass of Fe that reacted and the mass of FeS produced from the balanced equation. This can be obtained as follow:
Molar mass of Fe = 56 g/mol
Mass of Fe from the balanced equation = 8 × 56 = 448 g
Molar mass of FeS = 56 + 32 = 88 g/mol
Mass of FeS from the balanced equation = 8 × 88 = 704 g
SUMMARY:
From the balanced equation above,
448 g of Fe reacted to produce 704 g of FeS.
Finally, we shall determine the theoretical yield of FeS as follow:
From the balanced equation above,
448 g of Fe reacted to produce 704 g of FeS.
Therefore, 22.5 g of Fe will react to produce = (22.5 × 704)/448 = 35.36 g of FeS.
Thus, the theoretical yield of FeS is 35.36 g
A sound wave has a frequency of 3250 Hz and a
wavelength of 0.1 m. What is its velocity? SHOW
YOUR WORK
help please!!
Answer:
c = 325.0 m/s.
Explanation:
Hello there!
In this case, since the frequency, velocity and wavelength are related via:
[tex]c=\lambda *f[/tex]
Whereas c is the velocity, lambda the wavelength and f the frequency. Thus, we plug in the given data to obtain:
[tex]c=3250s^{-1}*0.1m\\\\c=325.0m/s[/tex]
Best regards!
Find the molarity of a 8.9M KOH solution if 76 ml of solution is diluted to 171 ml?
3.96m
20.03M
0.25m
3.96M
Heeeellllppppp meeee pls
Answer:
3.96 M
Explanation:
Step 1: Given data
Concentration of the concentrated solution (C₁): 8.9 MVolume of the concentrated solution (V₁): 76 mLConcentration of the diluted solution (C₂): ?Volume of the diluted solution (V₂): 171 mLStep 2: Calculate the concentration of the diluted solution
We can calculate the concentration of the diluted solution using the dilution rule.
C₁ × V₁ = C₂ × V₂
C₂ = C₁ × V₁/V₂
C₂ = 8.9 M × 76 mL/171 mL = 3.96 M
When drawing the Lewis structure of a molecule, start by determining the total number of available valence based on each element's ____________ Then, use the total number of electrons needed for each element to be stable, generally based on __________ to determine the _____________ by finding the difference between the number of needed and available electrons divided by two. Next, identify the central atom, which is the element with the ______________ other than hydrogen. Finally, arrange the number of bonds around the central atom to fulfill the stable number of electrons for each element.
Answer:
group number
the octet rule
total number of bonds
fewest valence electrons
Explanation:
When drawing the Lewis structure of a molecule, start by determining the total number of available valence based on each element's group number Then, use the total number of electrons needed for each element to be stable, generally based on the octet rule to determine the total number of bonds by finding the difference between the number of needed and available electrons divided by two. Next, identify the central atom, which is the element with the fewest valence electrons other than hydrogen. Finally, arrange the number of bonds around the central atom to fulfill the stable number of electrons for each element.