Answer:
No, water doesn't burn. It only can burn under specific conditions in a lab.
Explanation:
Janet runs 6.4 miles in one hour. Is it speed or velocity or acceleration
Answer:
acceleration
Explanation:
How many grams of NaOH (MW = 40.0) are there in 500.0 mL
of a 0.175 M NaOH solution?
A) 3.50
B) 114
C) 14.0
D) 2.19x10
Answer:
3.5
Explanation:
500*0.175= 8.75 *40/1000=3500/1000=3.5
Answer:
3.50 grams
Explanation:
Mastering chem
An electric range burner weighing 699.0 grams is turned off after reaching a temperature of 482.0°C, and is allowed to cool down to 22.7°C.
Calculate the specific heat of the burner if all the heat evolved from the burner is used to heat 560.0 grams of water from 22.7°C to 80.3°C.
J/g°C
Answer:
0.42 J/gºC
Explanation:
We'll begin by calculating the heat energy used to heat up the water. This can be obtained as follow:
Mass (M) of water = 560 g
Initial temperature (T₁) = 22.7 °C
Final temperature (T₂) = 80.3 °C.
Specific heat capacity (C) of water = 4.18 J/gºC
Heat (Q) absorbed =?
Q = MC(T₂ – T₁)
Q = 560 × 4.18 (80.3 – 22.7)
Q = 2340.8 × 57.6
Q = 134830.08 J
Finally, we shall determine the specific heat capacity of the burner. This can be obtained as follow:
Mass (M) of burner = 699 g
Initial temperature (T₁) = 482.0°C
Final temperature (T₂) = 22.7 °C
Heat (Q) evolved = – 134830.08 J
Specific heat capacity (C) of the burner =?
Q = MC(T₂ – T₁)
–134830.08 = 699 × C (22.7 – 482.0)
–134830.08 = 699 × C × –459.3
–134830.08 = –321050.7 × C
Divide both side by –321050.7
C = –134830.08 / –321050.7
C = 0.42 J/gºC
Therefore, the specific heat capacity of the burner is 0.42 J/gºC
To be considered a true mineral,
what state of matter must be
present?
how many moles are in 83 particles of sodium chloride?
Answer:
there are 1.4201927800478769 moles in 83 particles of sodium chloride. or 1.42 for short.
Explanation:
2 moles KCl + 3 moles O2 → 2moles KCIO3
Calculate the number of particles of each substance based on the number of moles from the balanced equation
Answer:
KCl ⇒ 1.205x10²⁴ molecules
O₂ ⇒ 1.807x10²⁴ molecules
KClO₃ ⇒ 1.205x10²⁴ molecules
Explanation:
In order to calculate the number of particles from the number of moles, we have to use Avogadro's number, which states the number of particles in one mol:
In 1 mol there are 6.023x10²³ particles (ions, molecules or atoms).So now we multiply the number of moles of each substance by Avogadro's number:
KCl ⇒ 2 mol * 6.023x10²³ molecules/mol = 1.205x10²⁴ moleculesO₂ ⇒ 3 mol * 6.023x10²³ molecules/mol = 1.807x10²⁴ moleculesKClO₃ ⇒ 2 mol * 6.023x10²³ molecules/mol = 1.205x10²⁴ moleculesHelpppp me pleaseeee now I’ve been struggling so bad w this
Answer:
I don't know what the passage says, but I feel like the most logical conclusion is D or the last one.
Explanation:
Answer:
D! Hope this helps! Figured id help with all of ur questions!
Explanation:
Im a wiz at science! ;)
why pie bond are not perticipate in hybridaization
What layer of the Sun is the location for nuclear fusion?
why does a mole of silicon weigh a different amount than a mole of carbon?
Answer:
[tex]\boxed {\boxed {\sf Different \ amount \ of \ protons, neutrons, \ and \ electrons}}[/tex]
Explanation:
Remember that a mole is equal to Avogadro's number: 6.022*10²³ atoms. Also, remember that an atom is made up of protons, neutrons, and electrons. Each element has a different amount of each.
If an element has more of these particles in 1 atom, then the atomic mass will be greater, ultimately making the molar mass (mass of 1 mole) greater.
Silicon has 14 protons, electrons, and neutrons, making its atomic mass 28.085 amu and its molar mass 28.085 grams. However, carbon only has 6 of each particle, so its atomic mass is smaller at 12.011 amu and molar mass is 12.011 grams.
an unknown sample with a mass of 50.0 grams changes from an initial temperature of 22.5°C to a final temperature of 32.4°C. It is known that the sample absorbed 444 J and f heat l. Bases on this information, what substance in the table is most likely the identity of this sample?
Answer:
Aluminum
Explanation:
What did Dalton compare atoms to?
A. Wood
B. Jacks
C. Marbles
D. Leaves
Explanation:
the answer is C marbles hope you find it helpful
What molecules can cells break down for energy?
The options
A. Very small gas molecules, like carbon dioxide.
B. Large molecules made from glucose, like starch.
C. Small sugars, like glucose.
D. Very small liquid molecules, like water.
Answer: I think the answer is C)
Explanation:
Consider this chemical equation:
2AgNO3(aq) + Cu(s) → Cu(NO3)2(aq) + 2Ag(s)
Which substances dissolve in solution? Select all
that apply.
AgNO3
Cu
Cu(NO3)2
Ag
Answer is:AgNO3 and Cu(NO3)2
Answer:
the answer is very correct as AgNO3 and Cu(NO3)2
Answer:
A,C
Explanation:
the person above me is correct
2. Write the symbol proposed by Dalton for silver, sulphur. oxygen and gold.
Answer:
check the pdf hope it helps :)
Explanation:
Part A
Choose the paramagnetic species from below.
O He
O Te
O T14+
O All of the above are paramagnetic.
None of the above is paramagnetic.
Answer:
o He
Explanation:
basyshsiz0qnshshhsjzz
What is the percent yield of LiCl if I produced 30.85g LiCl and my theoretical yield was calculated to be 35.40g LiCl?
Answer:
87.15%
Explanation:
To find percent yield, we can use this simple equation
[tex]\frac{Actual}{Theoretical} *100[/tex]
Where "Actual" is the amount in grams actually collected from the reaction, and "Theoretical" is, well, the theoretical amount that should have been produced.
They give us these values, so to find the percent yield, just plug the numbers in.
[tex]\frac{30.85}{35.40} *100\\\\ =87.15[/tex]
So, the percent yield is 87.15%
An easy trick to remember how to do this is just to divide the smaller number by the bigger number and move the decimal back two places. If you have a percent yield greater than 100%, something is wrong in the reaction.
How is this effect of dissolved
substances important in nature?
Explanation:
Water is called the "universal solvent" because it is capable of dissolving more substances than any other liquid. This is important to every living thing on earth. It means that wherever water goes, either through the air, the ground, or through our bodies, it takes along valuable chemicals, minerals, and nutrients.
When aqueous ammonia is added to a solution containing Bi3+ and Cu2+ cations, ____________ occurs. A. Reduction to black bismuth metal.B. Precipitation of a black bismuth hydroxide.C. Precipitation of white bismuth hydroxide. D. Formation of a red-brown precipitate of Cu2[Fe(CN)6].
Answer:
C. Precipitation of white bismuth hydroxide.
Explanation:
When aqueous ammonia is added to a solution that has Bi3+ and CU2+ cations, what we would have as a chemical result is the precipitation of white Bismuth hydroxide.
The chemical reaction for this can be written as,
Bi3+ + 2NH3 + 3H2O ⇌ Bi(OH)3(s) + 3NH4
Thank you!
how many hydrogen molecules are there in 1 ton of hydrogen?
Considering the definition of mass molar and Avogadro's Number, there are 3.0115×10²⁹ molecules in 1 ton of hydrogen.
First, the molar mass of hydrogen H₂, that is, the amount of mass that a substance contains in one mole, is 2 g/mole.
In this case, being 1 ton = 1,000,000 grams, the number of moles that 1 ton of hydrogen contains is calculated as:
[tex]1,000,000 gramsx\frac{1 mole}{2 grams} = 500,000 moles[/tex]
On the other hand, Avogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole.
Then, the number of molecules that 500,000 moles of hydrogen contains is calculated as:
[tex]500,000 molesx\frac{6.023x10^{23} molecules }{1 mole}[/tex]= 3.0115×10²⁹ molecules
Finally, there are 3.0115×10²⁹ molecules in 1 ton of hydrogen.
Learn more about:
mass molar: https://brainly.com/question/12695086?referrer=searchResultsAvogadro's Number: brainly.com/question/11907018?referrer=searchResults brainly.com/question/1445383?referrer=searchResults brainly.com/question/1528951?referrer=searchResultsI need this like NOW
An area on the map where we might see strong winds is:
Question 5 options:
near Maine
near California
near Washington D.C.
near Kansas City
help me please i beg u
Answer:
none of the above
Explanation:
Hard water contains relatively large concentrations of
A. Magnesium ions
B. Calcium ions
C. Iron ions
D. All of these ions
Answer:
I think the answer is All of these ions
How many moles are there in 8.0 grams of CaCO3
Answer: moles = 0.0799305403604264
Explanation:
Please Answer Giving Brainleist
What gas in the air is used by plants to make their own food?
A) Nitrogen
B) Water vapor
C) Carbon dioxide
D) Oxygen
Answer:
C) Carbon dioxide is the answer.
Answer:
C. Carbon Dioxide
Carbon is absorbed by plants and chemically converted to oxygen via photosynthsis.
Hope this helps!
What is the pressure (in atm) in a 5.00 L tank with 9.00 grams of oxygen gas at 350 K?
Answer:
1.61 atm
Explanation:
Using general gas law equation as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
From the information provided in this question,
V = 5.00L
T = 350K
mass of O2 = 9.00g
Using mole = mass/molar mass
Molar mass of O2 = 16(2) = 32g/mol
mole = 9/32
mole = 0.28mol
Using PV = nRT
P = nRT/V
P = 0.28 × 0.0821 × 350/5
P = 8.0458/5
P = 1.609
Pressure = 1.61 atm
The pressure of the oxygen gas at the given temperature and volume is 1.61 atm.
The given parameters;
volume of the gas, V = 5 Lmass of the oxygen gas, m = 9 gtemperature of the gas, T = 350 KThe number of the moles of the given gas is calculated as follows;
[tex]moles = \frac{m}{M} \\\\moles = \frac{9}{32} \\\\moles = 0.28 \ mol[/tex]
The pressure of the gas is calculated as follows;
[tex]PV = nRT\\\\P = \frac{nRT}{V} \\\\P = \frac{0.28 \times 0.0821 \times 350}{5} \\\\P = 1.61 \ atm[/tex]
Thus, the pressure of the oxygen gas at the given temperature and volume is 1.61 atm.
Learn more here:https://brainly.com/question/21912477
Photosynthesis in a plant is an example of which characteristic of living things?
1. Reproduction
2. Response to the environment
3. Growth and development
4. Ability to obtain and use energy
Answer:
4. Ability to obtain and use energyFor the reaction shown, drsw the major(s) expected product.
Answer:
2
Explanation:
Based on the procedure, which of the following are reasonable sources of errors in determining heat lost or gained? One or more answers are correct and you will receive negative points for incorrect answers. Group of answer choices The cap of the calorimeter was not closed immediately after mixing. The final temperature was measured before the temperature stopped changing. Temperatures were not measured right before mixing. Volumes of solutions were not measured accurately.
Answer:
The possible source of errors as regard the Procedure are:
The final temperature was measured before the temperature stopped changing The cap of the calorimeter was not closed immediately after mixing temperatures where not measured right before mixingExplanation:
The procedure referred to should a experiment with regards heat
The possible source of errors as regards the Procedure are:
The final temperature was measured before the temperature stopped changing The cap of the calorimeter was not closed immediately after mixing temperatures where not measured right before mixingPlease please help me
Answer:
I agree with Omar because it depends on what the charge of the object and magnet is. If the magnet is negative and the object is positive, they will pull together. If the magnet is negative and the object is negative then they will pull apart.
Explanation: