distance is constant and time increseas

Will Speed increase or decrease?

Answers

Answer 1

Answer:

The speed will be decrease

Answer 2
The speed will decrease

Related Questions

If the loudness drops to 90 % of its original value in 5.0 s , what is the time constant of the damped oscillation

Answers

This question is incomplete, the complete question is;

A gong makes a loud noise when struck. The noise gradually gets less and less loud until it fades below the sensitivity of the human ear. The simplest model of how the gong produces the sound we hear treats the gong as a damped harmonic oscillator. The tone we hear is related to the frequency f of the oscillation, and its loudness is proportional to the energy of the oscillation.

If the loudness drops to 90 % of its original value in 5.0 s , what is the time constant of the damped oscillation

Answer: the time constant of the damped oscillation is 47.44s

Explanation:

Given that;

t = 5.0s

Lets say Ao is the amplitude of initial loudness and later A(t) = 0.9 Ao

EXPRESSION for amplitude is  A(t) = Ao e^-t / T

t is time while T is time constant

so

0.9Ao = Ao e^-t / T  

0.9 = e^ -t/T

So we take the natural log of both the sides

ln (0.9) = -t/T

-0.1054 =  -t/T

0.1054 =  t/T

WE now substitute our value of t

0.1054 =  t/T

0.1054T =  5.0

T = 5 / 0.1054

T = 47.44s

therefore the time constant of the damped oscillation is 47.44s

how far will a brick starting from rest fall freely in 3.0 seconds?

Answers

Answer: It will be about 44.1m

Explanation:

your answer to this is 44m! hope this helps

When electrical energy is used what type of energy is also produced and considered to be waste energy?
Radiant energy
Thermal energy
Mechanical energy
Nuclear energy

Answers

A: Thermal Energy
When converting to electrical energy, some equipment is needed, like generators, transformers, cables, circuit breakers, and every kind of devices with specific functions to have a good and safe electrical service.
The resistances produce thermal energy as a result of current flowing through them.

Answer:

Thermal Energy

Explanation:

HELP PLS7. A steel ball is dropped from a height of 100 meters. Which velocity-time graph best describes the
motion of the ball?

Answers

Answer:

Option C.

Explanation:

To know which velocity-time graph best describes the motion of the ball, let us calculate the velocity of the ball and the time taken for the ball to get the ground. This can be obtained as follow:

1. Determination of the velocity.

Initial velocity (u) = 0 m/s

Acceleration due to gravity (g) = 9.8 m/s²

Height (h) = 100 m

Final velocity (v) =.?

v² = u² + 2gh

v² = 0² + (2 × 9.8 × 100)

v² = 0 + 1960

v² = 1960

Take the square root of both side.

v = √(1960)

v = 44.27 m/s

2. Determination of the time taken.

Acceleration due to gravity (g) = 9.8 m/s²

Height (h) = 100 m

Time (t) =.?

h = ½gt²

100 = ½ × 9.8 × t²

100 = 4.9 × t²

Divide both side by 4.9

t² = 100 / 4.9

Take the square root of both side

t = √(100 / 4.9)

t = 4.52 s

From the above illustration,

Initial time (t1) = 0 s

Final time (t2) = 4.52 s

Initial velocity (u) = 0 m/s

Final velocity (v) = 44.27 m/s

Thus, we can see that as the time increase, the velocity also increase. Therefore, option C gives the correct answer to the question.

what is the meaning of the word physics​

Answers

Answer:

the scientific study of natural forces such as light, sound, heat, electricity, pressure, etc.

Explanation:

mark as brainliest

You have made a simple circuit with one bulb. If you wanted to add an
extra bulb without the first bulb dimming. What would you need to
design?

A. A series circuit

B. A complex circuit

C. A parallel circuit

D. An incomplete circuit​

Answers

Answer:

[tex]A. \: A \: series \: circuit[/tex]

Explanation:

♨Rage♨

Answer:

  C.  A parallel circuit

Explanation:

Adding a bulb in parallel with the existing bulb will apply the same voltage to both bulbs. They will light equally bright.

You would design a parallel circuit.

_____

In a series circuit the same current would flow in both bulbs, but that current would be at half the original current level. Both bulbs would be dimmer than the first bulb was.

It is difficult to create a "complex" circuit with only two components. An "incomplete" circuit would result in no light at all.

what is the volume of an object that has a density of 65g/cm3 and a mass of 130g.

Answers

Density ρ is mass m per unit volume v, or

ρ = m / v

Solving for v gives

v = m / ρ

So the given object has a volume of

v = (130 g) / (65 g/cm³) = 2 cm³

correct me if im wrong

Answers

Your answer is correct. No problem and Have a nice day

What is the volume of an object if it has a mass of 10 grams and a density of 87 g/ml

Answers

Answer:

The answer is 0.115 mL

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

From the question

mass = 10 g

density = 87 g/ml

We have

[tex]volume = \frac{10}{87} \\ = 0.114942528...[/tex]

We have the final answer as

0.115 mL

Hope this helps you

How much work is done lifting a 5 kg ball from a height of 2 m to a height of 6 m? (Use 10 m/s2 for the acceleration of gravity.)
A) 100 J B) 200 J C) 300 J D) 400 J

Answers

Answer:

B) 200 [J]

Explanation:

In order to solve this problem we must remember the definition of work which tells us that it is equal to the product of force by a distance, in this case, the force is the weight of the ball. The distance traveled is 4 [m] since 6-2 = 4[m]

F = m*g

where:

m = mass = 5 [kg]

g = gravity acceleration = 10 [m/s^2]

F = 5*10 = 50 [N]

w = F*d

where:

F = force = 50 [N]

d = 4 [m]

w = 50*4 = 200 [J]

What is the maximum torque on a 150-turn square loop of wire 18.0 cm on a side that carries a 50.9 A current in a 1.60 T field

Answers

Answer:

The maximum torque on the loop is 395.80 N.m.

Explanation:

Given;

number of turns of the wire, N = 150 turns

length of the square loop, L = 18.0 cm = 0.18 m

current in the wire, I = 50.9 A

Magnetic field, B = 1.6 T

Maximum torque on the loop is given by;

τ = NIAB

τ = (150)(50.9)(0.18²)(1.6)

τ = 395.80 N.m

Therefore, the maximum torque on the loop is 395.80 N.m.

why do some athletes get injuries before and after the game?

Answers

Answer:

they don't strech so they tear a muscle when they perform

Explanation:

A marathon is 26 mi and 385 yd long. Estimate how many strides would be required to run a marathon. Assume a reasonable value for the average number of feet/stride.

Answers

Answer:

According to the University of Iowa, the average length of a stride is 5ft.

Now, the total distance of the marathon is:

26mi and 385yd.

Let's transform that distance into ft.

1mi = 5280ft

Then:

26mi = 26*5280ft = 137,280ft

1yd = 3ft

then:

385yd = 385*3ft = 1,155ft.

Then the total distance of the marathon, in ft, is:

D = 137,280ft + 1,155ft = 138,435 ft.

Now the average number of strides needed will be equal to the quotient between the total distance of the marathon and the distance traveled in each stride.

N = 138,435ft/5ft = 27,687.

21. A toy car starts from rest and begins to accelerate at 11.0 m/s2. What is the toy
car's final velocity after 6.0 seconds?

Answers

Answer:

Explanation:

Given parameters:

Initial velocity = 0

Acceleration = 11m/s²

Time  = 6s

Unknown:

Final velocity  = ?

Solution:

 From the given parameters, we use one of the appropriate equations of motion to solve this problem.

     V = U + at

V is the final velocity

U is the initial velocity

a is the acceleration due to gravity

t is the time taken

Input the parameters and solve;

     V  = 0 + 11 x6

     V  = 66m/s

The final velocity is 66m/s

when hydrogen shares electrons with oxygen the outermost shell of the hydrogen atoms are full with how many electrons? and oxygens valence shell is full with how many electrons? because the valence shells of these atoms are full,the atoms are stable.​

Answers

Answer:

2 and 8

Explanation:

please mark me brainiest I would really appreciate it.

Two charged objects are separated by distance, d. The first charge has a larger magnitude (size) than the second charge. Which one exerts the most force?

Answers

Pretty sure the first one

Please provide an explanation.

Thank you!!

Answers

Answer:

(a) 22 kN

(b) 36 kN, 29 kN

(c) left will decrease, right will increase

(d) 43 kN

Explanation:

(a) When the truck is off the bridge, there are 3 forces on the bridge.

Reaction force F₁ pushing up at the first support,

reaction force F₂ pushing up at the second support,

and weight force Mg pulling down at the middle of the bridge.

Sum the torques about the second support.  (Remember that the magnitude of torque is force times the perpendicular distance.  Take counterclockwise to be positive.)

∑τ = Iα

(Mg) (0.3 L) − F₁ (0.6 L) = 0

F₁ (0.6 L) = (Mg) (0.3 L)

F₁ = ½ Mg

F₁ = ½ (44.0 kN)

F₁ = 22.0 kN

(b) This time, we have the added force of the truck's weight.

Using the same logic as part (a), we sum the torques about the second support:

∑τ = Iα

(Mg) (0.3 L) + (mg) (0.4 L) − F₁ (0.6 L) = 0

F₁ (0.6 L) = (Mg) (0.3 L) + (mg) (0.4 L)

F₁ = ½ Mg + ⅔ mg

F₁ = ½ (44.0 kN) + ⅔ (21.0 kN)

F₁ = 36.0 kN

Now sum the torques about the first support:

∑τ = Iα

-(Mg) (0.3 L) − (mg) (0.2 L) + F₂ (0.6 L) = 0

F₂ (0.6 L) = (Mg) (0.3 L) + (mg) (0.2 L)

F₂ = ½ Mg + ⅓ mg

F₂ = ½ (44.0 kN) + ⅓ (21.0 kN)

F₂ = 29.0 kN

Alternatively, sum the forces in the y direction.

∑F = ma

F₁ + F₂ − Mg − mg = 0

F₂ = Mg + mg − F₁

F₂ = 44.0 kN + 21.0 kN − 36.0 kN

F₂ = 29.0 kN

(c) If we say x is the distance between the truck and the first support, then using our equations from part (b):

F₁ (0.6 L) = (Mg) (0.3 L) + (mg) (0.6 L − x)

F₂ (0.6 L) = (Mg) (0.3 L) + (mg) (x)

As x increases, F₁ decreases and F₂ increases.

(d) Using our equation from part (c), when x = 0.6 L, F₂ is:

F₂ (0.6 L) = (Mg) (0.3 L) + (mg) (0.6 L)

F₂ = ½ Mg + mg

F₂ = ½ (44.0 kN) + 21.0 kN

F₂ = 43.0 kN

Answer:

a.  Left support = Right support = 22 kNb.  Left support = 36 kN     Right support = 29 kNc.  Left support force will decrease     Right support force will increase.d.  Right support = 43 kN

Explanation:

given:

weight of bridge = 44 kN

weight of truck = 21 kN

a) truck is off the bridge

since the bridge is symmetrical, left support is equal to right support.

Left support = Right support = 44/2

Left support = Right support = 22 kN

b) truck is positioned  as shown.

to get the reaction at left support, take moment from right support = 0

∑M at Right support = 0

Left support (0.6) - weight of bridge (0.3) - weight of truck (0.4) = 0

Left support = 44 (0.3) + 21 (0.4)  

                                  0.6

Left support = 36 kN

Right support = weight of bridge + weight of truck - Left support

Right support = 44 + 21 - 36

Right support = 29 kN

c)

as the truck continues to drive to the right, Left support will decrease

as the truck get closer to the right support,  Right support will increase.

d) truck is directly under the right support, find reaction at Right support?

∑M at Left support = 0

Right support (0.6) - weight of bridge (0.3) - weight of truck (0.6) = 0

Right support = 44 (0.3) + 21 (0.6)  

                                  0.6

Right support = 43 kN

How long does it take a P-wave to travel 7,000 km? ______ minutes b) How long does it take an S-wave to travel 7,000 km? ______ minutes c) How long does it take a Love wave to travel 7,000 km? ______ minutes d) How long does it take a Rayleigh wave to travel 7,000 km? ______minutes

Answers

Answer:

A. 8.64 secs.

B. 14.58 secs.

C. 26.002 secs.

D. 33.46secs.

Explanation:

A. P wave would travel 7000km

p-wave travels on a speed of 13.5km/s

= 7000km/13.5km/s

= 8.64 secs.

B. S-wave time to travel 7000km

s-wave travels on a speed of 8km/s

= 7000km/8km/s

= 14.58 secs.

C Love wave travels at a speed of 10,000m/s ( 2.7778 m/s ).

= 7000km to miles

= 4349.598m/2.788m/s

= 26.002 secs.

D. Rayleigh wave to travel 7,000 km

10,000m/s ( 2.1667 m/s ).

= 7000km to miles

= 4349.598m/2.1667m/s

= 33.46secs.

The diagram shows two forces acting on the dog. What are these two forces

Answers

Answer:

kenietic and potential i guess

Explanation:

One airplane is approaching an airport from the north at 181 kn/hr. A second airplane approaches from the east at 278 km/hr. Find the rate at which the distance between the planes changes when the southbound plane is 30 km away from the airport and the westbound plane is 15 km from airport.

Answers

Answer:

The value  is  [tex]  \frac{dR}{dt} =  -286.2 \  km/hr [/tex]

Explanation:

From the question we are told that  

   The speed of the airplane from the north is [tex]\frac{dN}{dt}  =  -181 \  km /hr[/tex]

The negative sign is because the direction is towards the south

  The speed of the airplane from the east is  [tex]\frac{dE}{dt}  =  -278 \  km/hr[/tex]

The negative sign is because the direction is towards the west

   The distance of the southbound plane from the airport is  [tex]N  =  30 \  km[/tex]

   The distance of the westbound plane is  [tex]E =  15 \  km[/tex]

Generally the distance between the plane is mathematically represented using Pythagoras theorem  as

    [tex]R^2  = N^2 + E^2[/tex]

Next differentiate implicitly this equation to obtain the rate at which the distance between the planes changes

So

     [tex]2R\frac{dR}{dt} =  2N \frac{dN}{dt} +   2E\frac{dE}{dt}[/tex]

Here

     [tex]R = \sqrt{N^2 + E^2}[/tex]

=>    [tex]R = \sqrt{30^2 + 15^2}[/tex]

=>    [tex]R = \sqrt{30^2 + 15^2}[/tex]

=>    [tex]R =33.54 \ m [/tex]

    [tex]2(33.54) * \frac{dR}{dt} =  2( 30)*(-181)  +   2*15*(-278)[/tex]

=>   [tex] 67.08 * \frac{dR}{dt} =  -19200[/tex]

=>   [tex]  \frac{dR}{dt} =  -286.2 \  km/hr [/tex]

The rate of change of the distance between the planes is 286.23 km/hr.

The given parameters;

speed of the airplane from North, dn/dt = 181 Km/hspeed of the airplane from the East, de/dt = 278 km/hnorth distance, n = 30 kmeast distance, e= 15 km

The distance between the two planes is calculated by applying Pythagoras theorem as shown below;

[tex]d^2 = n^2 + e^2\\\\d = \sqrt{n^2 + e^2} \\\\d = \sqrt{30^2 + 15^2} \\\\d = 33.54 \ km[/tex]

The rate of change of the distance between the planes is calculated as follows;

[tex]d^2 = e^2 + n^2\\\\2\frac{dd}{dt} = 2e\frac{de}{dt} + 2n\frac{dn}{dt} \\\\d\frac{dd}{dt} = e\frac{de}{dt} + n\frac{dn}{dt}\\\\(33.54) \frac{dd}{dt} = (15)(278) \ + (30)(181)\\\\(33.54) \frac{dd}{dt} = 9600\\\\\frac{dd}{dt} = \frac{9600}{33.54} \\\\\frac{dd}{dt} = 286.23 \ km/hr[/tex]

Thus, the rate of change of the distance between the planes is 286.23 km/hr.

Learn more here:https://brainly.com/question/11488002

A car travels at a velocity of 80 m/s, accelerates than stops in 250 second. What is the acceleration of the truck?


(I’ll give brainliest please someone help me on this and explain it with work I don’t get it)

Answers

The acceleration is negative in other words it’s a deceleration.
using v^2 = u^2 + 2as
0 = (80^2)+ 2 a 250
0 = 6400 + 500 a
a = -6400/500 = - 12.8 m/s^2

Newton's first law states that objects do not change their motion unless acted upon by a net force. What does the word 'net' mean in this context?
A woven net, such as a fishing net or basketball net
B To catch or ensnare
C Remaining or left over after everything has been accounted for
D To cover, such as with mosquito netting​

Answers

Answer it is b is the best option to pick A, does that make sense

A tower crane has a hoist motor rated at 159 hp. If the crane is limited to using 72.0 % of its maximum hoisting power for safety reasons, what is the shortest time in which the crane can lift a 5550 kg load over a distance of 89.0 m

Answers

Answer:

The value is    [tex]t = 56.68 \  s  [/tex]

Explanation:

From the question we are told that

   The rating of the hoist motor is  [tex]k  =  159hp = 159 *746 =118614 \ W[/tex]

    The  percentage of it power used is  [tex]z = 0.72 * 118614=85402.08 \ W[/tex]

      The  mass of the load is m  = 5550 kg

      The distance is  h = 89.0 m

The potential  energy required to lift the load through that distance is

     [tex]E =  m *  g * h[/tex]

=>    [tex]E =  5550 *  9.8 *  89.0[/tex]

=>   [tex]E =  4840710 \ J[/tex]

Generally the time taken is mathematically represented as

       [tex]t = \frac{E}{ z}[/tex]

=>    [tex]t = \frac{4840710}{ 85402.08}[/tex]

=>    [tex]t = 56.68 \  s  [/tex]

Which of the organisms in the food web above is the top level carnivore

Answers

Answer:

apex consumers

Explanation:

they are top

True.or false A railroad track runs southwest to northeast.

Answers

Answer:

ns for high-speed rail in the United States date back to the High Speed Ground Transportation Act of 1965. Various state and federal proposals have followed. Despite being one of the world's first countries to get high-speed trains (the Metroliner service in 1969), it failed to spread. Definitions of what constitutes high-speed rail vary, including a range of speeds over 110 mph (180 km/h) and dedicated rail lines. Inter-city railwith top speeds between 90 and 125 mph (140 and 200 km/h) is sometimes referred to in the United States as higher-speed rail.[1]

Amtrak's Acela Express (reaching 150 mph, 240 km/h), Silver Star, Northeast Regional, Keystone Service, Vermonter and certain MARC Penn Line express trains (all five reaching 125 mph, 201 km/h) are the only high-speed services in the country.

As of 2020, the California High-Speed Rail Authority is working on the California High-Speed Rail project and construction is under way on sections traversing the Central Valley. The Central Valley section is planned to open in 2029 and Phase I is planned for completion in 2031.[2]

Contents

1 Definitions in American context

2 History

2.1 Faster inter-city trains: 1920–1941

2.2 Post-war period: 1945–1960

2.3 First attempts: 1960–1992

2.4 Renewed interest: 1993–2008

2.5 Plans for 2008–2013

3 Current state and regional efforts

3.1 The Northeast

3.1.1 Northeast Corridor: Next Generation High-Speed Rail

3.1.1.1 Proposed routes

3.1.2 Northeast Maglev proposal

3.1.3 New Jersey–New York City upgrades

3.1.4 New York

3.1.5 Pennsylvania

3.2 Western States

3.2.1 California

3.2.2 Pacific Northwest

3.2.3 Arizona

3.3 Mid-Atlantic and the South

3.3.1 Florida

3.3.2 Southeast

3.3.3 Texas

3.4 Midwest

3.4.1 Illinois and the Midwest

3.5 The Southwest

4 Federal high-speed rail initiatives

4.1 American Recovery and Reinvestment Act of 2009

4.1.1 Strategic plan

4.2 2009 federal grant funding

4.3 2010 allocation

4.3.1 Cancellation of funds for Wisconsin, Ohio, and Florida

4.4 2011 and 2012 proposals and rejections of funding

5 See also

6 Notes

7 Further reading

8 External links

Explanation:

am I right? be honest

Answers

Answer:

I chose c because it is the greater slope at point c

please answer this question with an explanation
will mark brainiest

Answers

Answer:

jenny

Explanation:

An airplane flies with a constant speed of 600 km/h. to the west. How far can it travel in 1/4 hour?

Answers

Answer:

d = 150 km

Explanation:

Speed of an airplane is 600 km/h

We need to find how far it travel in 1/4 hour.

We know that the speed of an object is given by distance travelled divided by the time taken. Let d is the distance covered in 1/4 hour. So,

[tex]v=\dfrac{d}{t}\\\\d=v\times t\\\\d=600\ km/h \times \dfrac{1}{4}\ h\\\\d=150\ km[/tex]

So, it will cover 150 km.

i need help, for physics

Answers

There are 2.2 pounds to 1.0 kilogram. So 1982 pounds = 901 Kg
Weight = 901 x 9.8 =8830 N

Find the linear velocity of a point moving with uniform circular motion, if the point covers a distance s in the given amount of time t. s

Answers

Answer:

The linear velocity is represented by the following expression: [tex]v = \frac{s}{t}[/tex]

Explanation:

From Rotation Physics we know that linear velocity of a point moving with uniform circular motion is:

[tex]v = r\cdot \omega[/tex] (Eq. 1)

Where:

[tex]r[/tex] - Radius of rotation of the particle, measured in meters.

[tex]\omega[/tex] - Angular velocity, measured in radians per second.

[tex]v[/tex] - Linear velocity of the point, measured in meters per second.

But we know that angular velocity is also equal to:

[tex]\omega = \frac{\theta}{t}[/tex] (Eq. 2)

Where:

[tex]\theta[/tex] - Angular displacement, measured in radians.

[tex]t[/tex] - Time, measured in seconds.

By applying (Eq. 2) in (Eq. 1) we get that:

[tex]v = \frac{r\cdot \theta}{t}[/tex] (Eq. 3)

From Geometry we must remember that circular arc ([tex]s[/tex]), measured in meters, is represented by:

[tex]s = r\cdot \theta[/tex]

[tex]v = \frac{s}{t}[/tex]

The linear velocity is represented by the following expression: [tex]v = \frac{s}{t}[/tex]

Other Questions
Why did the queen of hawaii surrender her power What is a central idea in "Flood Myths From Around the World"?O Ancient chillizations used their flood myths to control their audiences with stories of vengeful gods.O Early flood stories provide a look at the societal stratification of humans heroes and godsAncient food myths show that early civilizations had a low view of themselves morally and sought to please the godsthrough their storiesAncient flood myths gave audiences a positive way of understanding their place in the world as a new creation brought outof destruction please help Select the correct answer.In 14 days, the daily high temperature in Cedar Hills dropped by 16.8 degrees Fahrenheit. What is the average daily rate of change in the high temperature in degrees Fahrenheit?A. +2.2B. +1.2C. +1.1D. -1.2E. -2.2 Min read his book for 1/3 hour before dinner. He read his book for 1 1/4 hours after dinner. Altogether, how many hours did min read his book? HELPPP 16 POINTS. It was estimated that 325 people would attend game night, but 315 people actually attended.What is the percent error, to the nearest percent, of the estimate? Enter the answer in the box. Find the vertex and the axis of symmetry of the graph of y=-6(x+4)^2 3. If you want to write your town officials to suggest a new recreation program, you should write aA) letter of inquiryB) letter to the editorC) letter to an officialD) letter of complaint PLEASE read! What are the popular questions that come up for stave 1 A Christmas carol? What are some websites to research history of newspapers? which equation shows the point-slope tor of the line that passes through (3, 2) and has a slope of 1/3Y+ 2 = 1/3 (x + 3)y -2 = 1/3 (x-3)y+3 = 1/3 (x+3)y - 3 = 1/3 (x - 2) Why do you think some methods for taking a patients temperature are more accurate than others? Find the value of x. helppppppppppppp plzzzzzzzz Identify each structure based on its label.Compound A is a amine.Compound B is a amine.Compound C is a amine.Compound D is . For a given recipe, 12 cups of flour are mixed with 24 cups of sugar. How many cups of sugar should be used if 21 cups of flour are used?Assuming a constant ratio, fill out the table of equivalent ratios until you have found the value of x. PLEASE ANSWER THIS QUICK Employees at the Red Bluff Golf Club & Pro Shop have the opportunity to become certified trainers if they log enough hours. Aleeta would like to know which of her employees are certified. On the EmployeeAnalysis worksheet, in cell D5, enter a function that will return the text Certified if the number of training hours completed is 50 or more, otherwise return the text Not Certified. AutoFill the function down through cell D9. Club members get a 10% discount off all items in the Pro Shop. Aleeta wants to keep track of these discounts. On the Transactions worksheet, in cell I10, enter a function that will return 0.07 if the customer is a member, otherwise return a blank value (""). Use the fill handle to copy the formula down through cell I30. Deal Leasing leased equipment to Hand Company on January 1, 2021. The leased equipment's book value is $420,000 with no estimated residual value at the end of its useful life. The remaining useful life of the leased equipment is 15 years. The lease payments were calculated to provide the lessor a 10% return. Ten annual lease payments of $60,000 are due at the beginning of each year beginning January 1, 2021. Both companies use the straight-line method in depreciation/amortization their assets. What are the common nouns in this sentence:Kelly told me about a big sale at Toy City on Dodge Street. What city is furthest southwest in Europe? The hypoxic zone in the Gulf of Mexico is not unique; at least 200 dead zones exist at estuaries and along seacoasts worldwide. These low-oxygen regions share many of the same causes, and they all have ecological and economic repercussions for ecosystems and people. Fortunately, we can pursue strategies to lessen the number, severity, and impacts of dead zones. The following list includes examples of factors that contribute to the development of dead zones (the cause), the consequences that result from dead zones, and possible solutions. Which of the following are consequences of dead zones?a. Economic losses for fisher's b. Death or aquatic organism that cannot escape c. Policies to promote no-till agriculture d. Construction of wetlands to absorb nutrients e. Nutrient runoff from agriculture fertilizers, manure, and urban sources, which leads to rapid algal growth and subsequent bacterial decomposition what is a unit of electrical flow called