Dipole-dipole interactions are (weaker than, stronger than, equal to) hydrogen bonds.

Answer:

Explanation:

It's 21 /

Answer:

Temperature is a measure of the average kinetic energy of the particles in an object. When temperature increases, the motion of these particles also increases. (That should give you the answer if you read closely first sentence)

Answer:

Humans are modifying the world in many ways, and not all of them for the better. The changes we cause are often severe challenges to animals, plants and microbes in nature, from the introduction of pathogens or exotic invasive species to adding toxic substance or excessive nutrients, or causing climatic change. Often several changes occur at once. Nelson Hairston's lab focuses on freshwater environments, especially lakes and ponds, where some of the species present respond to environmental change with decreases in their numbers, even to the point of extinction, while others may benefit to excess, becoming so dominant that they present problems, as in the case of harmful algal blooms stimulated by nutrient enrichment or climate warming. Hairston's lab studies how individual species, food webs, and whole ecosystems are altered when the environment changes.

One way that some freshwater organisms respond to environmental change is to evolve rapidly. A marked change in the environment favors some characteristics of plants, animals and microbes over others. These character differences are often genetically based so that favored characteristics may increase in the next generation. The shorter the generation time, the faster this evolutionary change can occur. For example, tiny but abundant plankton, eaten by fish and other larger animals, can become adapted to the changed environment within a few years because their generation time is only a few days. Hairston's lab has shown that planktonic "water fleas" (Daphnia), major consumers of suspended algae in lakes, evolved to be tolerant of harmful algae within a decade of the appearance of blooms. This rapid evolution (termed "evolutionary rescue" in conservation biology) raises many intriguing questions, for all environments, not just freshwater: To what extent can we rely on species adapting rather than going extinct when their environment changes? How does the evolution of a species that plays a critical ecological role alter the interactions it has with other species, and the functioning of the entire ecosystem?

Answer:4.5 ×10^22)

Explanation:

no. of particles =no. of mole×avogadro's number of particles no. of particles =0.75×6.02×10^23 no. of particles =4.5 ×10^22

Answer:

Gas

Explanation:

I dunno but a lucky guess i guess

Answer:

1. B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.

2. 1400 mL

Explanation:

In chemistry, like dissolve like! Ammonia is a polar molecule having a significant dipole moment owing to its three N-H bonds. On the other hand, hexane is a purely non-polar hydrocarbon hence the two substances can never dissolve in each other.

From the dilution formula;

C1V1=C2V2

C1= Initial concentration of the solution

V1 = Initial volume of the solution

C2 = Final concentration of the solution

V2= Final volume of the solution

2.8 M * 750.0 mL = 1.5 M * V2

V2 = 2.8 M * 750.0 mL/1.5 M

V2 = 1400 mL

Answer:

The third one!

Answer:

yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use

Answer:

alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.

Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.

Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.

dnt learn all thr properties.

these are the main properties..u can learn thse only. hope it will help u

Answer:

Ture

Explanation:

Ture

True

True

True

Explanation:

protons and neutrons.....

...

Answer:

The subatomic particles are Protons and Neutrons.

Answer:

Minerals can form in three primary ways being precipitation, crystallization from a magma and solid- state transformation by chemical reactions (metamorphism). Mineral Precipitation is when a mineral is formed by crystallization from a solution. Examples include quartz, halite (table salt), calcite, and gypsum.

Answer:

When magma cools slowly, deep below the surface, it has time to form large crystals in regular patterns. The second way that minerals form is through solutions. (A solution is when one substance is dissolved uniformly in a liquid.) When elements and compounds leave the solution, they can crystalize.

Answer:

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Explanation:

An electron has an acceleration of 2.33*10² [tex]\frac{m}{sec^{2} }[/tex]

To be able to express in units [tex]\frac{m}{min^{2} }[/tex], you must carry out the conversion taking into account that 1 [tex]\frac{m}{sec^{2} }[/tex]= 3600 [tex]\frac{m}{min^{2} }[/tex]. Then you can apply the following rule of three: if 1 [tex]\frac{m}{sec^{2} }[/tex] equals 3600 [tex]\frac{m}{min^{2} }[/tex], 2.33 * 10² [tex]\frac{m}{sec^{2} }[/tex] equals how much [tex]\frac{m}{min^{2} }[/tex]?

[tex]\frac{m}{min^{2} }=\frac{2.33*10^{2} \frac{m}{sec^{2} }*3600\frac{m}{min^{2} }}{1\frac{m}{sec^{2} }}[/tex]

[tex]\frac{m}{min^{2} }=838800[/tex]

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Answer:

jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw

Answer: Hello, This is my most favorite class so I know this is right.

The most Reactive metal source is Copper.

Explanation:

This is the most reactive because it contains Lithium supplement.

Your Welcome! Mark me as Brainliest! :)

Answer:

HCI - BASE

KOH - ACID

H2SO4 - ACID

H30 + :- BASE

NAOH - ACID

Answer:

i don't know

Explanation:

Answer: B

Explanation: sorry if I'm too late but i just did this question and that was the right answer

Answer: 0.16 g H2

Explanation:

Mg+ H2SO4= MgSO4 + H2

Atomic massof Mg is 24

Molecular mass of H2 is 2

So,

24g Mg produce 2 g H2

1g Mg produce (2÷24)= 0.083 g H2

2.00g Mg produce (0.083×2) g H2

   = 0.16 g H2

 0.16g of hydrogen is formed when 2.00g of magnesium.

The mass of hydrogen gas formed when 2.00g of magnesium is equal to 0.165 g.

The chemical equation of a reaction is said to be a balanced equation when the number of atoms of substances is equal on either side of the equation.

Evergy balanced chemical equation must follow the law of conservation of mass according to which the total mass of the substances present on the reactant side should be equal to the total mass of substances present on the product side.

Given, the balanced chemical equation of the reaction of Mg and sulfuric acid:

[tex]Mg + H_2SO_4 \longrightarrow MgSO_4 +H_2[/tex]

One mole of magnesium produces hydrogen gas = 1mol

Given the mass of magnesium = 2g

The number of moles of Mg = 2/24.3 = 0.082 mol

Then the number of moles of hydrogen gas formed = 0.082 mol

The mass of the hydrogen gas = 0.082 × 2 = 0.165 g

Learn more about the balanced chemical equation, here:

brainly.com/question/15052184

#SPJ2

Answer:

In the middle of the forest.

Explanation:

They have to bury the remains in the middle of the forest at the Forensic Osteological Research Center in order to study the decomposition of the dead person. By studying the decomposition of dead person we can get a lot of information which can be used in the study of criminal cases and solving of crimes. The middle place in the forest is a perfect place to bury the remains due to presence of huge amount of microbes as well as insect that helps in the decomposition.

Answer:

2 FeCl2 + Cl2 -> 2 FeCl3

According to numbers in reaction

Amount of Cl2 is half of FeCl2

Explanation:

Answer:

There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Explanation:

One mole of a substance contains 6.02 × 10²³ particles

One mole of sulphur atom contains 6.02 × 10²³ atoms

Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³

Number of moles of sulphur atom = 0.00498 moles of sulphur atom

The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.

Molar mass of sulphur atom = 32 grams per mole (g/mol)

Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol

Mass of sulphur = 0.16 g

Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Answer:

c the number of electrons

Answer:

Zinc mercury transition metal

Silicon boron metalloid

Oxygen nitrogen non metal

Sodium alkali metal

Explanation:

Hello Mistyann!

First you need to know amount of barium phosphate is

Half of potassium phosphate, also 2.18 mol.

Molar mass of Barium phosphate is 3·137.2 + 2·(30.97+4·16) g/mol

You can calculate it yourself dear.

Now mass is amount of substance · molar mass.

It has been an honour to teach you, dear,

God bless!

Answer:

it is less dense than oxygen gas.

Explanation:

Hydrogen is the simplest chemical element that exists. The symbol for the chemical element Hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.

Hydrogen is a chemical element found in group (1) of the periodic table and as such it has one (1) electrons in its outermost shell. Therefore, Hydrogen has an atomic number of one (1) and a single valence electrons because it has only one proton and one electron in its nucleus.

In Chemistry, the properties of a chemical element that can be observed and measured without changing its chemical nature is known as a physical property. It includes density, color, freezing point, opacity, smell, melting point, viscosity, etc.

Hence, the statement which describes a physical property of hydrogen is that it is less dense (density) than oxygen gas.

Answer:

anode: magnesium

cathode: nickel

Explanation:

edg. 2021

Answer:

cell wall and chloroplasts

Explanation:

Answer:

Q1 is A.

Q2 is right

Q3 is D.....I dont

really know about this one

Q4 is right