Answer:
No, scientists did not accept Wegener's theory
Explanation:
In a book titled; "The Origin of Continents and Oceans", published in 1915, Wegener introduced his ideas about the theory of continental drift.
According to his idea, "all the continents were once joined together in an "Urkontinent" before breaking up and drifting to their current positions"(live science).
Though some of his ideas were correct, some of them were also quite wrong. Scientists rejected his idea because he did not detail any mechanism by which the continental drift occurs.
The diagram shows a homemade car being pushed with a force of 25 N. The force causes the car to move at a constant speed of 3 m/s2. What will happen if the force is changed to 35 N?
Answer:
The acceleration of the car will increase drastically
Explanation:
Based on newtons second law of motion, the force applied on a body is directly proportional to the product of its mass and acceleration;
Force = mass x acceleration
Since the mass of the car is constant, an increase in force will cause an increase in acceleration.
A decrease in the force will impact a lesser acceleration on the motor car.
This way, the change in velocity of the body per unit of time will increase drastically.
what pair of elements will react more violently
a chlorine and lithium
b chlorine amd potassium
c iodine and lithium
d iodine and potassium
Answer:
chlorine and potassium
Explanation:
Answer:
Chlorine and potassium
If you have a 17% salt solution, how much salt will need to be added to 71 mL of water?
Salt added : 14.5 g
Further explanationGiven
17% salt solution
71 ml water
Required
salt needed
Solution
%mass = (mass solute : mass solution) x 100%
71 ml water = 71 g water(density = 1 g/ml)
mass solute = x
[tex]\tt 17\%=\dfrac{x}{x+71}\times 100\%\\\\0.17(x+71)=x\\\\0.17x+12.07=x\\\\0.83x=12.07\\\\x=14.5[/tex]
What is the asthenosphere?
Question 3 options:
The hot, rigid inner part of the upper mantle which can’t flow
The hot, weak inner part of the upper mantle which can flow
The hot, weak outer part of the lower mantle
None of the above
Answer:
None of the Above
Explanation:
The Athenosphere is able to flow but is also part of the UPPER LAYER meaning none of these choices are correct
Help, please, I really need it.
Answer:
CO(g) + H2O(g) ⇌ CO2(g) + H2(g)
What is the number of electronsin hydrogen
Answer:
There's only one electron in hydrogen.
Answer:
Hydrogen contain 1 electron
Explanation:
Metals in general have:
a. High electrical conductivity
b. High thermal conductivity
c. High density
d. All of the above
Answer:
d. All of the above
Explanation:
Is BaOH2 soluble or insoluble in water?
Answer:
Explanation:
Tough question.
The answer is very dependent on the temperature of the water. At 0o C, less than 5 grams is soluble in water.
The curve increases as the temperature increases. At 80oC about 35 grams is soluble in water 100 mL of water. So Ba(OH)2 is very soluble at higher temperatures.
Maybe the question can be resolved just a little better at room temperature. The solubility is still less than 5 grams / 100 mL. That makes it slightly soluble or more soluble than other things.
So to answer the question, you need to specify the temperature. I would say it is, but be prepared to defend your answer.
The reaction below will occur in a gaseous system at STP:
6 NO (g) + 4 NH3 (g) —> 5 N2 (g) + 6 H20 (g)
What volume of nitrogen gas will be produced from 15.0 L of nitrogen monoxide gas?
12.5 L
18.0L
15.0 L
22.5 L
Answer:
V = 12.5 L
Explanation:
Given data:
Volume of NO = 15.0 L
Temperature and pressure = standard
Volume of nitrogen gas produced = ?
Solution:
Chemical equation:
6NO + 4NH₃ → 5N₂ + 6 H₂O
Number of moles of NO:
PV = nRT
n = PV/RT
n = 1 atm × 15.0 L / 0.0821 atm.L /mol.K × 273.15 K
n = 15.0 atm.L / 22.43 atm.L /mol
n = 0.67 mol
now we will compare the moles of No and nitrogen gas.
NO : N₂
6 : 5
0.67 : 5/6×0.67 = 0.56
Volume of nitrogen gas:
PV = nRT
1 atm × V = 0.56 mol × 0.0821 atm.L /mol.K × 273.15 K
V = 12.5 atm.L / 1 atm
V = 12.5 L
which expression has a value of 10
A. (10+10)/5-3
B. (10+10)/(5-3)
C. (10+10/5)-3
D. 10+10/(5-3)
(math)
Define chemical reaction
Answer:
a process that involves rearrangement of the molecular or ionic structure of a substance, as distinct from a change in physical form or a nuclear reaction.
A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.
hope this helps ^^
urgent plzz help meeee thx
Answer:
8
Explanation:
From the question given above, the following data were obtained:
t–butyl ion = (CH₃)₃C⁺
Number of valence electron =?
The valence electron(s) talks about the combining power of an element or compound as the case may be.
Considering the t–butyl ion, (CH₃)₃C⁺ we can see that it has a charge of +1 indicating that it has given out 1 electron to attain the stable octet configuration which has a valence electrons of 8. Thus, the valence electron of t–butyl ion, (CH₃)₃C⁺ is 8
Why are bubbles and color changes not always chemical change?
The current model of the atom suggests that ?
Answer:
i dont see the model bro
Explanation:
Answer:
The current model of the atom shows an atom that is mostly empty space. In the center is a small nucleus made of protons and neutrons.
Explanation:
Which of the following measurements are required to find the work done on an object?
1. The mass and volume of the object
2. The volume of the object and the distance the object moved
3. The force exerted on the object and the distance the object moved
4. The force exerted on the object and the time it took to move the object
Answer:
1.p=mV................
During ionic bonding, there is a transfer of electrons...
O from one metallic element to a different metallic element
O from one nonmetallic element to a different nonmetallic element
O from one metallic element to a different metalloid
O from one metallic element to a different nonmetallic element
Answer:
from one metallic element to a different nonmetallic element
Explanation:
For example NaCl is ionic compound in which Na metal donate electron to Cl non metal
What is the difference between the Lewis model and the valence-shell electron pair repulsion (VSEPR) model?
A.
Only the Lewis model shows the covalent bonds in a molecule.
B.
Only the VSEPR model can be used to explain intermolecular forces.
C.
Only the Lewis model takes into account unbonded electrons.
D.
Only the VSEPR model shows the geometric shape of a molecule.
Answer: only the VSEPR mode shows the geometric shape of a formula.
A coiled spring with coils that are closely spaced then widely then closely then widely then closely, ending with a yellow line labeled 1 second. What is the frequency of this wave?
Answer:
The frequency of the wave is 2Hz.
Explanation:
The frequency of a wave is the number of waves that pass a fixed point in a given amount of time. It can be measured by counting the number of crests that pass the point in a given time period. The higher the number is, the greater is the frequency of the wave.
So, by counting the number of times the coils in the spring are widely spaced, which is 2 times in 1 second, we get the frequency of the wave.
Answer:
The answer is 2.
Explanation:
Hope this helps ;)
Which evidence shows that heat is given off when a candle burns?
A. A match is used to light the candle.
B. The burning candle produces a yellow flame.
O c. Covering the burning candle extinguishes the flame.
D. Solid candle wax near the flame melts as the candle burns.
thing
Answer:
D. solid candle wax near the flame melts as the candle burns.
Answer:
Part D, melting is a product of heating
Explanation:
Identify each of the following compounds as binary or ternary.
a. nickel (III) oxide
b. copper(II) iodide
c. tin(IV) nitride
d. chromium (II) bromide
e. iron (III) phosphide
f. lithium hydroxide
g. Potassium sulfate
h. Ammonium phosphide
i. Barium nitrate
j. cobalt (II) phosphate
Answer:
binary compounds have 2 different elements, and ternary compounds have 3
Nickel(III)oxide: binary, Ni2O3
Copper (II)iodide: binary, CuI2
Tin(IV) nitride: binary, Sn3N4
Chromium (II)bromide: binary, CrBr2
Iron(III)phosphide: binary, FeP
Explanation:
please help!!!
Decide which molecules in the simulation will represent the substances from the actual reaction. Include a strategy to deal with the difference in structure between the actual reaction N2 + 3H2 ⇌ 2NH3 and the simulated reaction. Not all molecules need to be used.
Answer:
I FINNALY GOT MY HANDS ON THE AWNSER, dont
copy word for word though Explanation:
Simulation of a reaction is a chemical reaction modeling or demonstration tool, using various software to better understand the molecular structure and the physical and chemical properties of the molecule. Here the actual reaction is N2 + 3H2 -----> 2NH3. In the simulation reactions, the nitrogen and hydrogen molecules in the actual reaction are described by different colored circles or dots and the bonds are produced using a single, double or triple line that touches each molecule and gives an appearance like the reactants and the products' ball and stick model. Example: Molecule of nitrogen as o---triple line---o. A molecule of hydrogen as O———O. Chemical symbols such as N and H are expressed in Actual Chemical Reaction, N2 and H2 and the bonds are represented by single, double or triple lines that do not impact the atoms in the molecule as follows: Nitrogen Molecule: N -triple Bond- N. Hydrogen Molecule: H - H.
Car and Motorcycle engines are controlled by what chemical reaction?
Car and Motorcycle engines are controlled by a chemical reaction which is controlled by gasoline and oxygen.
What is a Chemical reaction?A chemical reaction may be defined as a process that significantly involves the chemical transformation of one set of chemical substances to another. This process involves the utilization of substances known as reactants that are transformed into other substances known as products.
The fuel in cars and motorcycles delivers the source of energy to them in order to move from one place to another. This fuel significantly contains gasoline which reacts with atmospheric oxygen and results in a small explosion which derives some sort of energy that is finally consumed by the vehicle's engine.
Apart from this, the combustion of fuel is also facilitated in the presence of oxygen which liberates extremely high amounts of carbon dioxide in the atmosphere. This reaction has also occurred in the engines of vehicles.
Therefore, car and Motorcycle engines are controlled by a chemical reaction which is controlled by gasoline and oxygen.
To learn more about Chemical reactions, refer to the link:
https://brainly.com/question/11231920
#SPJ2
determine the hydronium ion concentration of an aqueous solution that has a pH of 4.0
Answer:
Imagewww.chem.purdue.edu › Equilibrium
Calculating the Hydroxide Ion Concentration from pOH
To calculate the pH of an aqueous solution you need to know the concentration of the hydronium ion in moles per liter ...
Calculating pH
Calculating hydronium ion ...
Calculating pOH
Calculating hydroxide ion ...
Calculating pKa
People also ask
How do you find hydronium ion concentration when given pH?
The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation employed to find the pH. [H3O+] = 10-pH or [H3O+] = antilog (- pH) Example: What is the hydronium ion concentration in a solution that has a pH of 8.34? On a calculator, calculate 10-8.34, or "inverse" log ( - 8.34).
226
) Which equation represents the radioactive decay of Ra?
88
Answer:
A
Explanation:
The study of a chemical is called chemistry.
The correct answer is A
Radioactive decay is the process by which an unstable atomic nucleus loses energy by radiation. A material containing unstable nuclei is considered radioactive.
The radioactive of the Ra is option A that is:-
[tex]RA^{226}_{88}----->Rn^{222}_{86} +He^4_2[/tex].
During the decomposition, the element is breakdown into the neutron, proton, and electron.
Hence, the correct answer is A.
For more information, refer to the link:-
https://brainly.com/question/14698383
As an electron in an atom moves from a higher energy state to a lower energy state, the atom
1 becomes a negative ion
2 becomes a positive ion
3 releases energy
4 absorbs energy
Answer:
3 releases energy
Explanation:
An electron in an energy level has a definite amount of energy associated with it at that level.
Electrons can undergo transitions from one level to another. However, when the electron changes its state, it must absorb or emit the exact amount of energy which will bring it from the initial to the final state.
When the electron is excited, it moves from the ground state to an excited state, it must absorb energy. On returning from an excited state to a lower level or the ground state, energy is emitted, giving rise to a line in the spectrum.
Answer: 3 because it releases energy
Look at the questions labelled A, B, C, D. A How many substances are there in drinking water? B How much fluoride is in drinking water? C Is fluoride soluble in drinking water? D Should fluoride be added to drinking water? Which one of the questions cannot be answered by science alone? Tick one box.
Answer:
Magnesium, calcium and sodium.
Explanation:
Magnesium, calcium, sodium, and other beneficial minerals are the substances present in drinking water. Different regions have different fluoride concentration in their water such as in sea water, fluoride level is 1.1 mg/L while in surface water, the concentration is 0.01–0.3 ppm. Yes, fluoride is soluble in water. No, fluoride should not be added to drinking water because it harm for health. All the questions can be answered by science because it is related to chemistry.
What is an advantage of using natural gas rather than a coal burning power plant?
Answer:
I hope it helps u
Explanation:
The advantages of using natural gas rather than coal are the following,
Natural gas is present in large amount than coal.Natural gas is less costly than other fossil fuel sources of energy. It increases security by decreasing dependence.Natural gas is more environmentally friendly.Natural gas is much safer to store.It is reliable.Natural gas is a fossil fuel, though the global warming emissions from its combustion are much lower than those from coal or oil.Natural gas emits 50 to 60 percent less carbon dioxide (CO2) when combusted in a new, efficient natural gas-power plant compared with emissions from a typical new coal plant.If the quantity of heat lost or gained is ( ΔH = mass X change in T X specific heat) mass change in T specific heat, what is the amount of heat required to raise 200.0 g of water from 22.00°C to 100.0°C?
Specific heat of water is 4.180 J/g °C
Chemistry Conversion: Convert 3.0099 dumps to wigs. 6375.23 dumps = 1 wig Round your answer to 5 sig figs. dumps and wigs is not a real unit just used for example.
Answer:
There are 0.00047212 wig in 3.0099 dumps.
Explanation:
In this problem, we need to convert 3.0099 dumps to wigs.
6375.23 dumps = 1 wig (given)
1 dump = (1/6375.23) wig
To convert 3.0099 dumps to wigs, multiply 3.0099 by (1/6375.23).
3.0099 dumps = [tex]\dfrac{1}{6375.23}\cdot3.0099[/tex]
= 0.00047 wig
Hence, there are 0.00047212 wig in 3.0099 dumps.
Determine the number of valence electrons for following (Ne) 3s2 3p4
a.3
b.2
c.4
d.7
e.16
f.6
Pls help
Answer:
F. 6
Explanation: