HUD's role includes supervising the FHA's mortgage insurance programs, regulating interstate land sales, supporting urban renewal efforts, and overseeing public housing initiatives.
1. Scope and activities of various farm credit agencies:
Farm credit agencies are financial institutions that provide credit and other financial services to farmers and rural communities. These agencies are typically established by governments.2. Activities of the California Housing Finance Agency:The California Housing Finance Agency (CalHFA) is a state agency in California that aims to provide affordable housing opportunities for low and moderate-income individuals and families.3. Role of HUD in supervising the FHA, interstate land sales, urban renewal, and public housing.4. the U.S. Department of Housing and Urban Development (HUD) is a federal agency responsible for overseeing various housing and urban development programs. HUD plays a significant role in supervising the following areas:
learn more about mortgage insurance here:
https://brainly.com/question/30514465
#SPJ11
The following table shows the past two years of quarterly sales information. Assume that there are both trend and seasonal factors and that the seasonal cycle is one year.
A seasonal cycle is a pattern of repeating fluctuations in a time series that occurs within a year, such as the rise and fall of sales during holiday periods.
Given table shows the past two years of quarterly sales information:Quarter 1 Quarter 2 Quarter 3 Quarter 4Year 1 $15,000 $18,000 $22,000 $25,000Year 2 $16,000 $20,000 $24,000 $27,000We can see that the sales figures have increased every year, which indicates a positive trend in sales. However, the sales figures for each quarter of both years vary, indicating the presence of seasonal factors.The seasonal cycle in this case is one year, which means that the same pattern of seasonal fluctuations will repeat itself every year. Therefore, we need to calculate the average sales figures for each quarter over both years to identify the seasonal pattern.The average quarterly sales figures over two years are:Quarter 1: (15,000 + 16,000) / 2 = $15,500Quarter 2: (18,000 + 20,000) / 2 = $19,000Quarter 3: (22,000 + 24,000) / 2 = $23,000Quarter 4: (25,000 + 27,000) / 2 = $26,000We can see that the sales figures are highest in Quarter 4 and lowest in Quarter 1, which is consistent with the seasonal pattern. Therefore, to forecast future sales, we can use a combination of trend and seasonal factors.The trend factor can be calculated using linear regression or other methods to identify the rate of growth in sales over time. The seasonal factor can be calculated by dividing the actual sales figure for each quarter by the average sales figure for that quarter, which will give us a seasonal index. A seasonal cycle is a pattern of repeating fluctuations in a time series that occurs within a year, such as the rise and fall of sales during holiday periods. The goal of seasonal adjustment is to identify and remove the seasonal patterns from a time series so that the underlying trend and other non-seasonal fluctuations can be analyzed more easily. This is important because seasonal patterns can distort the interpretation of time series data and lead to incorrect conclusions.For example, if we observe an increase in sales during the holiday season, we may assume that the company is performing well overall, when in fact the increase is only due to seasonal factors. Similarly, if we observe a decline in sales during a slow season, we may assume that the company is performing poorly overall, when in fact the decline is only due to seasonal factors.Therefore, to make accurate forecasts and informed decisions, it is important to identify and account for seasonal factors in time series data. This can be done using methods such as seasonal adjustment, which involves estimating the seasonal pattern and removing it from the time series data, or seasonal forecasting, which involves using past seasonal patterns to predict future sales.
To know more about seasonal cycle visit: https://brainly.com/question/11205841
#SPJ11
Assume the multiplier is 5 and that the total crowding-out effect is $20 billion. An increase in government purchases of $10 billion when the multiplier is 5 will shift the aggregate demand curve a. right $150 billion. b. right S70 billion. c. right $30 billion. d. None of the above is correct.
An increase in government purchases of $10 billion with a multiplier of 5 will shift the aggregate demand curve to the right by $50 billion. So the correct answer would be "None of the above is correct."
The multiplier effect determines how changes in government spending impact aggregate demand and the overall economy. The multiplier is calculated as 1/(1 - MPC), where MPC is the marginal propensity to consume. If the multiplier is 5, it means that for every dollar increase in government spending, the overall aggregate demand increases by $5.
In this case, an increase in government purchases of $10 billion would lead to a total increase in aggregate demand of $10 billion multiplied by the multiplier of 5, resulting in a $50 billion shift to the right in the aggregate demand curve. However, none of the given choices match this value. Therefore, the correct answer would be "None of the above is correct."
It's important to note that the total crowding-out effect of $20 billion mentioned in the question does not directly impact the calculation of the shift in the aggregate demand curve. The crowding-out effect refers to the reduction in private sector spending due to increased government borrowing, which may influence the overall impact on the economy but is not directly related to the shift in the aggregate demand curve.
Learn more about demand from here:
https://brainly.com/question/29349235
#SPJ11
Explain what import tariffs are, why a government uses this form
of taxation and what is the intended outcome. Discuss who pays the
tariff, who gets the money and how does this affect trade between
th
Import tariffs are taxes imposed by a government on imported goods. They are used as a form of taxation to protect domestic industries, regulate trade, and generate revenue for the government. The intended outcome of import tariffs is to increase the price of imported goods, making them less competitive compared to domestic products.
When a government imposes an import tariff, it is usually the importing company or entity that pays the tariff. The importing company is responsible for paying the additional tax when bringing the goods into the country. However, this cost is often passed on to the consumers in the form of higher prices for imported goods.
The revenue collected from import tariffs goes to the government. It can be used to fund various government programs, infrastructure development, or offset budget deficits. The government has the discretion to allocate the revenue as deemed necessary.
Import tariffs affect trade between countries by altering the cost competitiveness of imported goods. By raising the price of imported products, tariffs make domestic goods relatively more affordable and competitive. This can lead to an increase in demand for domestic products and support the growth of domestic industries. However, it also makes imported goods more expensive for consumers, potentially reducing choices and increasing costs.
Import tariffs can have broader implications on international trade relationships. They may provoke retaliatory actions from trading partners, leading to trade disputes and trade wars. Tariffs can also disrupt global supply chains and hinder economic integration and cooperation.
Overall, the use of import tariffs by a government aims to protect domestic industries, regulate trade flows, and generate revenue. However, the impact and effectiveness of tariffs depend on various factors, including the specific industry, international trade dynamics, and the response of trading partners.
Learn more about import tariffs and their impact on international trade and economic policies here:
brainly.com/question/23035999
#SPJ11
Complete Question- Explain what import tariffs are, why a government uses this form of taxation and what is the intended outcome. Discuss who pays the tariff, who gets the money and how does this affect trade between the two countries. In your opinion, are tariffs effective?
Michael is an avid player of board games and is founder and president of the League of Serious Gamers (LSG) social club. Every year, Eugene travels to the Vietnam Convention of Board Game Players where he mixes with fellow enthusiasts, sees the many displays and experiences different board games. He usually returns with new or collector board games that he has purchased and which he onsells at cost price to members of the LSG. This year he bought a chess set which, he was told by the German seller, was once owned by Emperor Quang Trung. Michael placed the following entry in the newsletter that was regularly sent to LSG members: Gamers, a special find this time! Emperor Franz Joseph’s chess board and pieces. $10,000 for this piece of history. Peter is a wealthy collector of rare historical pieces. He was in the bedroom of his son Mark, who was a member of the LSG, telling him that he needed to go out and get a job. After delivering his lecture, he noticed the LSG newsletter, which was open at the advertisements section, and saw the entry about the chess set. Peter knew that the Quang Trung chess set was a much sought-after historical piece. However, he thought that the chess set was in the collection of an American buyer, and in any event would be worth much more than $10,000. Accordingly, Peter wrote down the phone number in the advertisement, arranged to meet Michael, inspected the chess set and paid him the money. Peter arranged a conference to which he invited other well-known collectors of historical pieces. However, his moment of triumph was destroyed when a friend of him loudly proclaimed to Peter and the assembled audience: ‘Oh, my dear boy! That’s not the Quang Trung chess set. Where did you get this — some backstreet bazaar?’ The conference ended in a humiliating farce for Peter. Sitting alone after everybody had left, he suddenly suffered a fit of pique, picked up the chess set and flung it against the wall. As a result the board was cracked and several pieces were badly chipped. Peter now wants to direct his ire against the person he blames for his humiliation — Michael — based on the representations he made about the chess set
If Peter sue Michale,what would happen?
If Peter decides to sue Michael based on the representations he made about the chess set, the outcome will depend on several factors. First, the court would consider whether Michael made false or misleading statements about the chess set in his advertisement and newsletter entry. If it is determined that Michael knowingly misrepresented the chess set's historical significance or value, Peter may have a valid claim of misrepresentation or fraud against Michael.
However, Michael could argue that he believed the information he received about the chess set's historical origin and value was accurate at the time. He might also claim that he did not intentionally deceive Peter and genuinely believed the chess set was authentic. The court would need to assess the credibility of both parties' arguments and evaluate the evidence presented. Additionally, the court would consider the condition of the chess set after Peter flung it against the wall. Peter's actions could be seen as intentional damage to the property, potentially affecting the damages he could seek from Michael.
Ultimately, the outcome of the lawsuit would depend on the evidence, witness testimonies, and the court's interpretation of applicable laws regarding misrepresentation, fraud, and property damage.
Learn more about the legal implications of misrepresentation and fraud in sales transactions here:
brainly.com/question/30548741
#SPJ11
Consider the following linear programming:
Min 2A + 2B
s.t A
+ 3B >= 12
3A
+ B >= 24
A,
B >= 0 a) Find the optimal solution using the graphical solution procedure.
b) If the objective function is changed to 2
A
+
6
B
,
what will the optimal solution be?
c) How many extreme points are there? What are the values of A and B at each extreme point?
A. The minimum value of 2A + 6B is 24. B. The minimum value of 2A + 6B is 24. c) The values of A and B at each extreme point are given below: Extreme Point A B(0, 0) 0 0(8, 0) 8 0(4, 4) 4 4
a) Find the optimal solution using the graphical solution procedure. The constraints of the given linear programming problem are: A + 3B ≥ 12, 3A + B ≥ 24, A, B ≥ 0Solving these inequalities to get the feasible region: Plotting the above feasible region graph, we get:
To find the optimal solution, we need to find the intersection of line 2A + 2B = C (where C is constant) and the feasible region. For example, if C = 8, we get the line 2A + 2B = 8. Graphing this line on the above feasible region, we get: We can see that the line 2A + 2B = 8 does not intersect the feasible region. Therefore, we need to try other values of C until we find the optimal solution.
The results of these calculations are tabulated below: By comparing the objective function value of these intersection points, we see that the optimal solution of the given problem is A = 4, B = 4. Therefore, the minimum value of 2A + 2B is 16.b) If the objective function is changed to 2A + 6B, the optimal solution will change. We can find the new optimal solution using the same graphical method as above. Line 2A + 6B = C will be plotted on the same feasible region graph. The results of these calculations are tabulated below: We can see that the optimal solution of the modified problem is A = 0, B = 4. Therefore, the minimum value of 2A + 6B is 24.
c) How many extreme points are there? What are the values of A and B at each extreme point?
There are three extreme points in the feasible region:
(0, 0), (8, 0), and (4, 4).
The values of A and B at each extreme point are given below: Extreme Point A B(0, 0) 0 0(8, 0) 8 0(4, 4) 4 4
To know more about extreme point click here:
https://brainly.com/question/31434810
#SPJ11
Analysis of a PERT problem shows the estimated timo for the critical path to be 108 days with a variance of 64 There is a 80 probability that the project will be completed before approximately day A 98 OB 109 OC 115 OD 108 OE 118
There is an 80% probability that the project will be completed before approximately day C, 115.
To solve this problem, we need to use the formula for a normal distribution:
Z = (X - μ) / σ
Where:
Z = the z-score corresponding to the desired probability
X = the time we want to find the probability for
μ = the mean estimated time for the critical path, which is 108 days
σ = the square root of the variance, which is sqrt(64) = 8
We want to find the time at which there is an 80% probability of completing the project before that time. This means that the area under the normal distribution curve to the left of this time is 0.8.
Looking up the z-score corresponding to the left-tail probability of 0.8 in a standard normal distribution table, we get:
z = 0.84
Substituting these values into the formula above and solving for X, we get:
0.84 = (X - 108) / 8
X - 108 = 6.72
X = 114.72
Therefore, there is an 80% probability that the project will be completed before approximately day C, 115.
Learn more about normal distribution from
https://brainly.com/question/30390016
#SPJ11
Simores Company sold merchandise on account for $6,000 to DotiDo Company with credit terms of 2/10, r/30. Five days later, DosiDe Company returned $2.000 of merchandise that win damaged, along with a check to settle the account What entry does Samores Company make upon receipt of the check Select one A Cash 4,000 Accounts Receivable 4.000 Cash 3.920 Sales Returns and Allowances 2,080 Accounts Receivable 6.000 Cash 5.880 Sales Discounts 120 Accounts Receivable 6.000 Cash 3,920 Sales Returns and Allowances 2,000 Sales Discounts 110 Accounts Receivable 6,000 OD G
The correct entry that Samores Company makes upon receipt of the check is:
Cash 3,920
Sales Returns and Allowances 2,080
Accounts Receivable 6,000
This entry reflects the return of $2,000 worth of damaged merchandise by DosiDe Company and the settlement of the remaining account balance. The Sales Returns and Allowances account is credited for the returned merchandise, reducing the revenue previously recognized. The Accounts Receivable account is debited to decrease the amount owed by DosiDe Company. Finally, Cash is debited for the amount received, which is $3,920 ($6,000 - $2,080).
learn more about Company here:
https://brainly.com/question/30532251
#SPJ11
There was a disposition of a vehicle for cash for $18,000, the original cost of which was $35,000 and the accumulated depreciation of $25,000. Do the journal entry:
Entry:
To record the cash sale of a vehicle with an original cost of $35,000, cumulative depreciation of $25,000, and a sale price of $18,000, the following journal entry might be made:
Disposition date:
Cash Debit Credit $18,000
Depreciation Accumulated $25,000
Loss on Vehicle Sale $7,000 Vehicle (Accumulated Vehicle Cost) $35,000
Explanation:
Due to the $18,000 automobile sale, the Cash account was debited.
$25,000. The vehicle's accumulated depreciation is reduced by the debit to the Accumulated Depreciation account. Accumulated depreciation is a contra-asset account that tracks an asset's overall depreciation costs.
The car sale loss is debited to the Loss on Disposal of the car. This loss is determined as the difference between the original cost ($35,000) and the accumulated depreciation ($25,000) less the cash received ($18,000), which is $7,000.
The credit to the Vehicle (or Accumulated Vehicle Cost) account eliminates the vehicle's initial cost from the books as the company no longer owns it.
To know more about accumulated depreciation
https://brainly.com/question/15610334
#SPJ11
Demand for wine bottles at one of Vino's warehouses is normally distributed with average 10000 and standard deviation 3333. The firm wants to achieve a service level of 90%. How much safety inventory do they need to carry to achieve this service level? O a. 5060 units O b. 4400 units O c. 933 units O d. 4266 units
To determine the amount of safety inventory needed to achieve a specific service level, we can use the formula for safety stock:
Safety Stock = Z * σ * √(LT)
Where:
Z is the z-score corresponding to the desired service level
σ is the standard deviation of demand
LT is the lead time
In this case, the average demand is 10,000 bottles and the standard deviation is 3,333 bottles. The desired service level is 90%, which corresponds to a z-score of approximately 1.28 (obtained from standard normal distribution tables).
Assuming the lead time is known, we can calculate the safety stock as follows:
Safety Stock = 1.28 * 3,333 * √(LT)
The exact value of the lead time is not provided in the question, so we cannot determine the specific amount of safety inventory. However, using the provided options, we can compare the values of safety stock to find the closest match.
To learn more about Stock visit here:
brainly.com/question/29992015
#SPJ11
Which of the following is included in logistics?
a. Creating teams and increase communication in the company
b. Raw material
C Employees transportation
d. Maintaining products
Logistics includes raw material management, employees transportation, and maintaining products. However, creating teams and increasing communication in the company are not directly related to logistics.
The correct option is a. Creating teams and increase communication in the company
Logistics refers to the process of planning, implementing, and controlling the flow and storage of goods, services, and related information from the point of origin to the point of consumption. It encompasses various activities involved in the supply chain management to ensure efficient and effective movement of products or services. Creating teams and increasing communication in the company are more related to organizational management and fostering collaboration within the company, rather than specific logistics activities. While effective teamwork and communication are important for overall organizational efficiency, they are not considered direct components of logistics processes.
Learn more about Logistics here:
https://brainly.com/question/30009541
#SPJ11
Kellerman Company manufactures a series of kitchen utensils. This year the company decided to add a new silicone-coated whisk to the product line. The test marketing for the whisk showed high favorability and the company estimated sales of about 10,000 whisks per month. Jonah, the production manager, is performing both a variable and an absorption costing analysis even though GAAP requires that absorption costing be used on the company's financial statements. In one to two paragraphs, answer the following questions: * Briefly describe the key difference between variable costing and absorption costing when calculating product costs. * Explain the impact that absorption costing has on income when the number of units produced differs from the number of units sold. Explain why Jonah would also use variable costing analysis even though absorption costing is required by GAAP. The assignment is due by the end of May 20th. You may complete the writing assignment via email if you are unable to attach a word document.
The key difference between variable costing and absorption costing is in how they treat fixed manufacturing overhead costs.
Variable costing only considers variable costs as product costs, meaning that it only includes direct materials, direct labor, and variable manufacturing overhead in the cost of goods sold calculation. Fixed manufacturing overhead costs are treated as period expenses under variable costing and are not included in the cost of goods sold calculation. On the other hand, absorption costing treats all manufacturing costs, both fixed and variable, as product costs. This means that fixed manufacturing overhead costs are allocated to units produced and are included in the cost of goods sold calculation.
When the number of units produced differs from the number of units sold, absorption costing will result in a different net income than variable costing. Because absorption costing includes fixed manufacturing overhead costs in the cost of goods sold calculation, net income will be higher when more units are produced than sold, and lower when fewer units are produced than sold. This is because under absorption costing, the unabsorbed fixed manufacturing overhead costs are carried forward as inventory on the balance sheet until they are eventually sold. In contrast, variable costing will show a consistent net income regardless of the number of units produced or sold, as fixed manufacturing overhead costs are treated as period expenses.
Jonah may use variable costing analysis even though absorption costing is required by GAAP for several reasons. First, variable costing provides a better understanding of the relationships between sales, costs, and profits, which can help managers make better decisions about pricing, product mix, and production levels. Second, variable costing can help identify inefficiencies in the production process, such as excess capacity or idle time, that may not be apparent under absorption costing. Finally, variable costing can provide insight into the impact of changes in variable costs, such as raw material prices or labor rates, on profitability, which can help managers forecast future earnings and plan accordingly. However, it is important to note that while variable costing may be useful for internal decision-making, absorption costing is required for external financial reporting under GAAP.
Learn more about manufacturing here:
https://brainly.com/question/17052484
#SPJ11
Based on this model, firms earn revenue when ________ purchase ________ in product markets. Suppose Eleanor earns $575 per week working as jewelry appraiser for Classy's Jewelry Store. She uses $10 to get her car washed at Spotless Car Wash. Spotless Car Wash pays Darnell $200 per week to wash cars. Darnell uses $125 to purchase necklace from Classy's Jewelry Store.
Identify whether each of the following events in this scenario occurs in the factor market or the product market. Eleanor earns $575 per week working for Classy's Jewelry Store
Eleanor spends $10 to get her car washed. Darnell spends $125 to purchase necklace from Classy's Jewelry Store.
Which of the elements of this scenario represent a flow from a household to a firm? This could be a flow of dollars, inputs, or outputs.
Check all that apply. - Eleanor's labor - The $125 Darnell spends to purchase necklace from Classy's Jewelry Store - The $200 per week Darnell earns working for Spotless Car Wash - The car wash Eleanor receives
Eleanor earns $575 per week working for Classy's Jewelry Store - This event occurs in the factor market, as Eleanor is providing her labor (input) to the firm.
Eleanor spends $10 to get her car washed - This event occurs in the product market, as Eleanor is purchasing a service (car wash) for personal use.
Darnell spends $125 to purchase a necklace from Classy's Jewelry Store - This event occurs in the product market, as Darnell is purchasing a product (necklace) for personal use.
Elements of this scenario that represent a flow from a household to a firm:
- Eleanor's labor: Eleanor provides her labor to Classy's Jewelry Store in exchange for income.
- The $125 Darnell spends to purchase a necklace from Classy's Jewelry Store: Darnell's spending contributes to the revenue of Classy's Jewelry Store.
- The $200 per week Darnell earns working for Spotless Car Wash: Darnell's earnings from Spotless Car Wash represent a flow of income from the firm to the household.
The car wash Eleanor receives is not a
is a service received by Eleanor, but it does not involve an exchange of money or inputs with a firm.
Learn more about purchase here:
https://brainly.com/question/31035675
#SPJ11
A. Two banks quote the following nominal interest rates: bank A charges interest at 8.08% per annum compounded semi-annually and bank B charges 8.75% per annum compounded quarterly. Calculate the APR to show which bank charges the most interest. (2 marks) B. Suppose you have £50 000 to invest: I. If interest rate is 5.5%, calculate the investment at the end of 5 years if interest is compounded (i) continuously and (ii) quarterly (4 marks) II. The double of year it will take the invest to double if interest is compounded continuously. (2 marks)
Bank B has a higher interest rate than bank A, and continuous compounding yields a higher return than quarterly compounding for a £50,000 investment at 5.5% interest.
A. To compare the interest charges of bank A and bank B, we need to calculate the Annual Percentage Rate (APR) for each.
For bank A:
Nominal interest rate = 8.08% compounded semi-annually.
APR =[tex](1+(\frac{8.08\%}{2}))^{2} - 1[/tex]≈ 8.2224%
For bank B:
Nominal interest rate = 8.75% compounded quarterly.APR = (1 + (8.75%/4))^4 - 1 ≈ 8.8797%
Therefore, bank B charges a higher interest rate with an APR of approximately 8.8797%.
B. I. To calculate the investment at the end of 5 years with £50,000 and an interest rate of 5.5%:
(i) Continuously compounded:
Investment = £50,000 x [tex]e^{0.055 \times 5}[/tex] ≈ £67,243.16
(ii) Quarterly compounded:
Investment = £50,000 x [tex]\left(1 + \frac{0.055}{4}\right)^{4 \times 5}[/tex]≈ £66,891.84
II. To determine the number of years it takes for the investment to double with continuous compounding:
2 = [tex]e^{0.055 \times t}[/tex]
ln(2) = 0.055 x t
t ≈ ln(2)/0.055 ≈ 12.6 years
Therefore, it takes approximately 12.6 years for the investment to double with continuous compounding.
Learn more about investment here:
https://brainly.com/question/15105766
#SPJ11
How would MMM use the BCG portfolio analysis to assess
their product / business strategy?
MMM (Minnesota Mining and Manufacturing Company) would use the BCG portfolio analysis to evaluate their product/business strategy. The BCG analysis provides a framework for categorizing products and services according to their market share and growth rate.
It helps companies make strategic decisions about how to allocate resources and invest in their product lines. The BCG matrix has four categories: stars, cash cows, question marks, and dogs. Stars have a high market share and high growth rate, while cash cows have a high market share and low growth rate. Question marks have a low market share and high growth rate, while dogs have a low market share and low growth rate.Each of these categories requires different strategies. For example, stars should be invested in heavily to maintain their growth rate, while cash cows should be milked for their profits. Question marks require careful analysis to determine whether they are worth investing in, while dogs should be phased out to make way for more profitable products.MMM could use this framework to evaluate its product lines and determine which ones are worth investing in, and which ones should be divested or discontinued. They could also use it to assess potential new products and services to determine whether they are likely to be profitable. Overall, the BCG matrix is a useful tool for strategic planning and can help companies like MMM make informed decisions about their product/business strategy.
To know more about Minnesota Mining and Manufacturing Company visit:
https://brainly.com/question/31177815
#SPJ11
Degree of Financial Leverage: Northwestern Savings and Loan has a current capital structure consisting of $250,000 of 16% (annual interest) debt and 2,00 shares of common stock. The firm pays taxes at the rate of 40%. A) Using EBIT values of $80,000 and $120,000, determine the associated earnings per share (EPS). B) Using $80,000 of EBIT as a base, calculate the degree of financial leverage (DFL). C) Rework parts A and B assuming that the firm has $100,000 of 16% (annual interest) debt and 3,000 shares of common stock.
A) Using the given capital structure of Northwestern Savings and Loan and EBIT values of $80,000 and $120,000, we can calculate the associated earnings per share (EPS).
For EBIT = $80,000:
Interest expense = $250,000 * 16% = $40,000
Taxable income = $80,000 - $40,000 = $40,000
Taxes = $40,000 * 40% = $16,000
Net income = $40,000 - $16,000 = $24,000
EPS = $24,000 / 2,000 shares = $12 per share
For EBIT = $120,000:
Interest expense = $250,000 * 16% = $40,000
Taxable income = $120,000 - $40,000 = $80,000
Taxes = $80,000 * 40% = $32,000
Net income = $80,000 - $32,000 = $48,000
EPS = $48,000 / 2,000 shares = $24 per share
B) Using $80,000 of EBIT as a base, we can calculate the degree of financial leverage (DFL).
DFL = (EBIT + Interest Expense) / EBIT
For EBIT = $80,000:
Interest expense = $40,000
DFL = ($80,000 + $40,000) / $80,000 = 1.5
C) Reworking the calculations with a capital structure of $100,000 of 16% debt and 3,000 shares of common stock would yield different results for EPS and DFL. By plugging in the new values into the formulas provided in parts A and B, you can calculate the updated EPS and DFL figures.
Learn more about earnings per share
https://brainly.com/question/30609870
#SPJ11
The higher taxation of labour income with respect to capital
gains
Group of answer choices:
a. Decreases inequality because it increases the returns for
small investors
b. Increases inequality because
The higher taxation of labor income compared to capital gains is generally considered to increase inequality.
The higher taxation of labor income relative to capital gains tends to increase inequality. Labor income refers to the earnings individuals receive from their work, such as salaries, wages, or self-employment income. Taxing labor income at a higher rate means that individuals who rely on their labor for income bear a larger share of the tax burden. This can reduce their disposable income and limit their ability to accumulate wealth.
On the other hand, capital gains refer to the profits generated from the sale of assets, such as stocks, bonds, or real estate. In many jurisdictions, capital gains often receive preferential tax treatment, such as lower tax rates or exemptions. This preferential treatment benefits individuals who generate income from capital gains, typically those who are already wealthy and have substantial investments.
Learn more about taxation here:
https://brainly.com/question/1687138
#SPJ11
Kansas Company uses a standard cost accounting system. In 2017, the company produced 28,000 units. Each unit took several pounds of direct materials and 1.6 standard hours of direct labor at a standard hourly rate of $12.00. Normal capacity was 50,000 direct labor hours. During the year, 117,000 pounds of raw materials were purchased at $0.92 per pound. All materials purchased were used during the year. Instructions (a) If the materials price variance was $3,510 favorable, what was the standard materials price per pound? (b) If the materials quantity variance was $4,750 unfavorable, what was the standard materials quantity per unit? (c) What were the standard hours allowed for the units produced? (d) If the labor quantity variance was $7,200 unfavorable, what were the actual direct labor hours worked? (e) the labor price variance was $9,080 favorable, what was the actual rate per hour? (f) If total budgeted manufacturing overhead was $360,000 at normal capacity, what was the predetermined overhead rate? (g) What was the standard cost per unit of product? (h) How much overhead was applied to production during the year? (i) Using one or more answers above, what were the total costs assigned to work in process?
(a) To find the standard materials price per pound, we can use the materials price variance formula:
Materials Price Variance = (Actual Quantity Purchased × Actual Price) - (Actual Quantity Purchased × Standard Price)
Given that the materials price variance is $3,510 favorable and the actual quantity purchased is 117,000 pounds, we can set up the equation:
$3,510 = (117,000 × Actual Price) - (117,000 × Standard Price)
Since we are solving for the standard materials price per pound, we can rearrange the equation as follows:
Standard Price = (117,000 × Actual Price - $3,510) / 117,000
(b) To find the standard materials quantity per unit, we can use the materials quantity variance formula:
Materials Quantity Variance = (Actual Quantity Used × Standard Price) - (Standard Quantity Allowed × Standard Price)
Given that the materials quantity variance is $4,750 unfavorable and the standard quantity allowed is 28,000 units, we can set up the equation:
$4,750 = (Actual Quantity Used × Standard Price) - (28,000 × Standard Price)
Since we are solving for the standard materials quantity per unit, we can rearrange the equation as follows:
Standard Quantity Allowed = Actual Quantity Used - ($4,750 / Standard Price)
(c) The standard hours allowed for the units produced can be calculated by multiplying the standard hours per unit by the number of units produced:
Standard Hours Allowed = Standard Hours per Unit × Number of Units Produced
Given that each unit takes 1.6 standard hours of direct labor and the number of units produced is 28,000, we can calculate:
Standard Hours Allowed = 1.6 × 28,000
(d) To find the actual direct labor hours worked, we can use the labor quantity variance formula:
Labor Quantity Variance = (Actual Hours Worked - Standard Hours Allowed) × Standard Rate
Given that the labor quantity variance is $7,200 unfavorable, we can set up the equation:
$7,200 = (Actual Hours Worked - Standard Hours Allowed) × $12.00
(e) To find the actual rate per hour, we can use the labor price variance formula:
Labor Price Variance = (Actual Rate - Standard Rate) × Actual Hours Worked
Given that the labor price variance is $9,080 favorable, we can set up the equation:
$9,080 = ($Actual Rate - $12.00) × Actual Hours Worked
(f) The predetermined overhead rate can be calculated by dividing the total budgeted manufacturing overhead by the normal capacity:
Predetermined Overhead Rate = Total Budgeted Manufacturing Overhead / Normal Capacity
Given that the total budgeted manufacturing overhead is $360,000 and the normal capacity is 50,000 direct labor hours, we can calculate:
Predetermined Overhead Rate = $360,000 / 50,000
(g) The standard cost per unit of product can be calculated by adding the standard cost of direct materials per unit and the standard cost of direct labor per unit:
Standard Cost per Unit = Standard Cost of Direct Materials per Unit + Standard Cost of Direct Labor per Unit
(h) The overhead applied to production during the year can be calculated by multiplying the predetermined overhead rate by the actual direct labor hours worked:
Overhead Applied to Production = Predetermined Overhead Rate × Actual Direct Labor Hours Worked
(i) The total costs assigned to work in process can be calculated by adding the standard cost per unit of product multiplied by the number of units produced and the overhead applied to production:
Total Costs Assigned to Work in Process = (Standard Cost per Unit × Number of Units Produced) + Overhead Applied to Production
Know more about materials price variance here:
https://brainly.com/question/28211833
#SPJ11
Assume you are the Quality Head of a mid-sized IT services organization. Considering the increasing trend of development work that the organization is doing, you are presenting a proposal to the Top Management for implementation and assessment of CMMI for Development (CMMI- DEV). Top Management is asking why we should go for CMMI-DEV when we have already implemented ISO 9001:2015 Quality Management System in the organization. Briefly describe any significant five reasons that you would put forth to convince the Top Management to go for CMMI- DEV. [6 marks]
If I were the Quality Head of a mid-sized IT services organization, here are five reasons that I would put forth to convince Top Management to go for CMMI-DEV:1. CMMI-DEV is more specific to the development process.CMMI-DEV is specifically designed for software development organizations, while ISO 9001 is more general and is applicable to all industries.
As a result, CMMI-DEV is a better fit for a development-focused IT organization, and will provide more detailed guidance and best practices that are directly applicable to the development process.2. CMMI-DEV is more prescriptive.CMMI-DEV provides specific practices and activities that should be implemented in order to achieve a certain level of maturity. This level of prescriptiveness is helpful for IT organizations, as it provides a clear roadmap for what needs to be done to improve the development process.3. CMMI-DEV focuses on continuous improvement.CMMI-DEV is designed to help organizations continuously improve their development processes. This is achieved through regular assessments and evaluations, which provide a roadmap for improvement. This focus on continuous improvement can help IT organizations stay up-to-date with the latest development methodologies and technologies.4. CMMI-DEV helps IT organizations become more efficient and effective.CMMI-DEV provides guidance on how to improve efficiency and effectiveness of the development process. This can lead to faster development cycles, higher-quality products, and more satisfied customers.5. CMMI-DEV is recognized in the industry.CMMI-DEV is a widely recognized framework in the IT industry.
Achieving a certain level of maturity in CMMI-DEV can help IT organizations differentiate themselves from competitors and attract new business opportunities.Overall, CMMI-DEV is a more detailed and prescriptive framework for software development organizations, providing guidance on how to continuously improve the development process. While ISO 9001 is a general quality management system applicable to all industries, CMMI-DEV is a better fit for IT organizations that are focused on development work.
To know more about Quality Management visit-
https://brainly.com/question/32519971
#SPJ11
Problem 2-4 (Algo) A company that makes shopping carts for supermarkets and other stores recently purchased some new equipment that reduces the labor content of the jobs needed to produce the shopping
Problem 2-4 (Algo) A company that makes shopping carts for supermarkets and other stores recently purchased some new equipment that reduces the labor content of the jobs needed to produce the shopping carts. Prior to buying the equipment, the company used 2.4 direct labor hours to produce a shopping cart. The average wage rate for the workers was $10 per hour.
Labor is a variable cost for the company. It takes a certain amount of direct labor hours to produce a shopping cart, and the more carts produced, the more labor hours required. The company is now trying to determine the direct labor hours required to produce the shopping carts and the cost per unit of the new carts. Using the old labor cost per hour and the new direct labor hours, we can determine the direct labor cost per cart. Using the equation DL cost per cart = DL cost per hour x Direct labor hours, we can solve for the DL cost per cart as follows: DL cost per hour = Old wage rate = $10Direct labor hours per cart = 2.4 ÷ 1.2 = 2DL cost per cart = $10 × 2 = $20The DL cost per cart has increased from $24 (2.4 hours × $10 per hour) to $20 (2 hours × $10 per hour). This is because the new equipment has reduced the labor content needed to produce a cart, allowing the company to produce more carts with less direct labor, thus lowering the labor cost per unit. By reducing the direct labor hours needed to produce a shopping cart from 2.4 to 2 hours, the company has reduced its variable costs. The new equipment has allowed the company to produce more shopping carts with the same amount of direct labor.
To know more about supermarkets visit:
https://brainly.com/question/20593588
#SPJ11
Giapetto's Woodcarving, Inc., manufactures two types of wooden toys: soldiers and trains. A soldier sells for $27 and uses $10 worth of raw materials. Each soldier that is manu- factured increases Giapetto's variable labor and overhead costs by $14. A train sells for $21 and uses $9 worth of raw materials. Each train built increases Giapetto's variable la- bor and overhead costs by $10. The manufacture of wooden soldiers and trains requires two types of skilled labor: carpentry and finishing. A soldier requires 2 hours of finishing labor and 1 hour of carpentry labor. A train requires 1 hour of finishing and 1 hour of car- pentry labor. Each week, Giapetto can obtain all the needed raw material but only 100 fin- ishing hours and 80 carpentry hours. Demand for trains is unlimited, but at most 40 sol- diers are bought each week. Giapetto wants to maximize weekly profit (revenues – costs). Formulate a mathematical model of Giapetto's situation that can be used to maximize Gi- apetto's weekly profit.
The mathematical model of Giapetto's situation that can maximize Giapetto's weekly profit is: Maximize P = 13x1 + 11x2Subject to the constraints:x1 ≤ 40,10x1 + 9x2 ≤ Available raw materials,2x1 + x2 ≤ 100,x1 + x2 ≤ 80.
The objective is to determine the number of soldiers and trains that Giapetto's Woodcarving, Inc. must manufacture in order to maximize its weekly profits. Let's represent the decision variables as follows:x1 = number of soldiers to manufacture each week,x2 = number of trains to manufacture each week.We know that each soldier costs $10 worth of raw materials, and each train costs $9 worth of raw materials. Therefore, the total cost of raw materials, C1, will be: C1 = 10x1 + 9x2.We also know that the manufacture of each soldier increases Giapetto's variable labor and overhead costs by $14. Similarly, each train built increases Giapetto's variable labor and overhead costs by $10. Therefore, the total cost of variable labor and overhead, C2, will be:C2 = 14x1 + 10x2.The objective function is to maximize weekly profit (revenues – costs), which can be represented as:P = 27x1 + 21x2 – (C1 + C2)P = 27x1 + 21x2 – (10x1 + 9x2 + 14x1 + 10x2)P = 13x1 + 11x2We need to subject the above equation to the following constraints:1. Demand constraint: Giapetto can sell at most 40 soldiers each week. Therefore:x1 ≤ 402. Raw material constraint: Each week, Giapetto can obtain all the needed raw material. Therefore:10x1 + 9x2 ≤ Available raw materials3. Finishing labor constraint: Each soldier requires 2 hours of finishing labor and each train requires 1 hour of finishing labor. Therefore:2x1 + x2 ≤ 1004. Carpentry labor constraint: Each soldier requires 1 hour of carpentry labor and each train requires 1 hour of carpentry labor. Therefore:x1 + x2 ≤ 80All the above constraints are of the less-than-or-equal-to (≤) type, and they represent the feasible region of the problem.
To know more about manufactures visit:
brainly.com/question/29489393
#SPJ11
For Gundy Company, units to be produced are 6,200 in quarter 1 and 8,680 in quarter 2. It takes 1.6 hours to make a finished unit, and the expected hourly wage rate is $16 per hour. Prepare a direct labor budget by quarters for the 6 months ending June 30, 2022.
For preparing a direct labor budget for the 6 months ending June 30, 2022, we need to determine the labor hours required and labor costs incurred to produce the budgeted units.
For preparing a direct labor budget for the 6 months ending June 30, 2022, we need to determine the labor hours required and labor costs incurred to produce the budgeted units. Let us prepare the direct labor budget by quarters as follows:Direct labor budgetQuarter 1Quarter 2TotalUnits to be produced6,2008,68014,880Direct labor hours:6,200 units × 1.6 hours per unit9,9208,680 units × 1.6 hours per unit13,88823,808Direct labor cost:Direct labor hours × Hourly wage rate9,920 × $16 per hour$158,72013,888 × $16 per hour$222,208$380,928The direct labor budget for Gundy Company for the 6 months ending June 30, 2022, has been prepared as shown above. Here, we have calculated the direct labor hours and cost by multiplying the expected labor hours and hourly wage rate for each quarter with the respective units to be produced in each quarter. Gundy Company has to prepare a direct labor budget by quarters for the 6 months ending June 30, 2022. The company expects to produce 6,200 units in quarter 1 and 8,680 units in quarter 2. It takes 1.6 hours to make a finished unit, and the expected hourly wage rate is $16 per hour. To prepare the direct labor budget, the company needs to determine the labor hours required and labor costs incurred to produce the budgeted units.In quarter 1, Gundy Company will require 9,920 direct labor hours (6,200 units x 1.6 hours per unit) to produce the 6,200 units. The direct labor cost for the quarter will be $158,720 (9,920 direct labor hours x $16 per hour). In quarter 2, the company will require 13,888 direct labor hours (8,680 units x 1.6 hours per unit) to produce the 8,680 units. The direct labor cost for the quarter will be $222,208 (13,888 direct labor hours x $16 per hour).The total direct labor budget for the 6 months ending June 30, 2022, will be $380,928 ($158,720 + $222,208). By preparing the direct labor budget, Gundy Company can ensure that it has sufficient labor hours and budgeted labor costs to achieve its production targets in each quarter.
To know more about labor budget visit: https://brainly.com/question/29035104
#SPJ11
Given the following market equations: Supply: Qs = -1+1p Demand: Qd = 70 - 2p Solve for the equilibrium price = $
The equilibrium price is approximately $23.67. the following market equations: Supply: Qs = -1+1p Demand: Qd = 70 - 2p Solve for the equilibrium price = $
to find the equilibrium price, we need to set the quantity supplied equal to the quantity demanded.
the supply equation is given as qs = -1 + 1p, where qs represents the quantity supplied and p represents the price.
the demand equation is given as qd = 70 - 2p, where qd represents the quantity demanded and p represents the price.
setting qs equal to qd:
-1 + 1p = 70 - 2p
combining like terms:
3p = 71
dividing both sides by 3:
p = 71/3
p ≈ 23.67 at this price, the quantity supplied and the quantity demanded will be equal, resulting in a market equilibrium.
Learn more about equilibrium here:
https://brainly.com/question/30694482
#SPJ11
A retailer's demand for a stock-keeping unit (SKU) 756-RDU, white towels, is 28,540 per year. The cost of placing an order is $850, and the holding cost per unit per year is $32.
What is the economic order quantity?
What will be the total inventory cost in this case?
How many orders will the retailer place per year?
The supplier sells these specific white towels (SKU 756-RDU) in cases of 500 units only, such that any orders must be placed in multiples of 500 units. This makes it impossible for the retailer to order the exact EOQ (as calculated in part a.). Given this constraint, what order quantity would you recommend and why?
Hartley Incorporated buys plastic resin by the ton and then packages and distributes it in smaller amounts to industrial users. The resin typically costs $50 per ton, and Hartley uses 80,000 tons each year. Placing an order for more resin costs $500 in allocated labor costs for purchasing personnel. Holding costs for the resin are estimated at 1% of the product value each month. Hartley operates 365 days a year.
a. How much resin should Hartley order each time?
b. What will be the average inventory and annual holding cost?
Economic order quantity (EOQ) is defined as the optimum order quantity that minimizes the total cost of inventory management. The formula for the EOQ is:EOQ = √((2DS)/H)Where D is the annual demand, S is the cost of placing one order, and H is the holding cost per unit per year.
Using the provided values, we have:D = 28,540S = $850H = $32Plugging in the values:EOQ = √((2 × 28,540 × 850) / 32) = 595.12 ≈ 596 units.So, the economic order quantity is 596 units.Total inventory cost = (DS/Q × S) + (Q/2 × H)Where Q is the order quantity. Substituting the values:Total inventory cost = (28,540/596 × 850) + (596/2 × 32) = $17,105.03 ≈ $17,105.So, the total inventory cost in this case is $17,105.
The number of orders placed per year will be:D/QWhere Q is the order quantity.Substituting the values:D/Q = 28,540/596 = 47.91 ≈ 48 orders per year.The supplier sells these towels in cases of 500 units only, so the retailer can't order the exact EOQ of 596 units.To minimize costs, the retailer can order the closest multiple of 500 that is greater than or equal to the EOQ. In this case, it would be 1,000 units because it is a multiple of 500 and closer to 596 than 500. So, the order quantity that is recommended is 1,000 units.Let's calculate the EOQ for the plastic resin.Hartley uses 80,000 tons each year.S = $500D = 80,000H = 0.01 × $50 per month = $0.5 per ton per yearPlugging in the values:EOQ = √((2 × 80,000 × 500) / 0.5) = 8,944.27 ≈ 8,944 tons.So, Hartley should order 8,944 tons of plastic resin each time.a. The average inventory level is half of the EOQ, i.e., 8,944 / 2 = 4,472 tons.The annual holding cost would be:4,472 × $0.5 × 80,000 = $178,880.b. The average inventory is 4,472 tons, and the annual holding cost is $178,880.
To know more about Economic visit:
https://brainly.com/question/14355320
#SPJ11
Q1. Bannerman is a 3rd year student of GTUC offering a degree in Business management. He is interested in investigating the coping strategies adopted by micro small and medium (MSMES) to survive and innovate during a global pandemic.
(a). Tease out an appropriate project topic for Bannerman.
(b). Indicate and justify with two (2)reasons the main research approach he can use to conduct his study.
(c). Describe an appropriate research design with justification for the research approach selected.
Q(2).Based on your choices made in question one(1) discuss the following under methodology :
(a). Population and sampling
(b). Data collection instrument
(c). Methods of data analysis and presentation.
Q3. Based on contemporary issues, think of a research topic. Write out the title of your research and indicate the following :
Introduction (1/2-1page Long).
Problem Statement (1/2a page)
Main objective and 2 specific object.
Q4. Briefly discuss any three(3)philosophy assumptions behind the research approach you have chosen.
(a). What is the point of descriptive research?
(c). How does inferential statistics benefit the research?
The increasing adoption of AI technologies in the business sector has led to concerns about job displacement and changes in the nature of work.
Q1. (a) An appropriate project topic for Bannerman could be: "Exploring Coping Strategies and Innovation in Micro, Small, and Medium Enterprises (MSMEs) During the COVID-19 Pandemic: A Case Study in the Business Management Context."
(b) The main research approach Bannerman can use to conduct his study is qualitative research. Two reasons to justify this choice are:
In-depth understanding: Qualitative research allows Bannerman to delve deep into the experiences, perspectives, and subjective realities of MSME owners and managers.
Contextual and holistic analysis: The qualitative approach provides Bannerman with the opportunity to capture the complex contextual factors that influence coping strategies and innovation in MSMEs during a global pandemic.
Q2. Methodology: (a) Population and sampling: The population for Bannerman's study would be MSMEs that have operated during the global pandemic.
To learn more about business click here https://brainly.com/question/15826604
#SPJ11
In a minimum of 6-8 sentences discussed the effects of overturning Roe v Wade. In a minimum of 4-5 sentences discussed how much involvement the government should have on your personal lives ( internet, electronic devices, public places etc.). 3-5 Sentences on your thoughts how to determine or define whether something is obscene and what laws, if any, should be in place to limit obscene materials.
Overturning Roe v. Wade, which established the constitutional right to abortion in the United States, would have significant effects on reproductive rights and women's healthcare.
It could lead to increased restrictions on access to abortion, potentially resulting in limited availability of safe and legal abortion services. This could disproportionately affect marginalized communities with limited resources and hinder women's ability to make choices about their own bodies and reproductive health.
Regarding government involvement in personal lives, the extent to which the government should intervene is a matter of debate. While some argue for minimal government interference to preserve individual liberties, others believe that government has a responsibility to protect public welfare and ensure the safety and well-being of its citizens. Balancing individual privacy rights with the need for public safety and security is a complex task.
Determining what is considered obscene and establishing laws to limit obscene materials is also a complex issue. The definition of obscenity varies across cultures and societies and can be influenced by social norms, values, and legal frameworks. Generally, obscenity refers to sexually explicit material that goes beyond what is considered socially acceptable or violates community standards.
To know more about constitutional right visit:
https://brainly.com/question/29799909
#SPJ11
when making a business decision with ethical concerns, merely complying with the law is referred to as the
When making a business decision with ethical concerns, merely complying with the law is referred to as the minimum ethical standard.
A minimum ethical standard is the most fundamental level of ethical behavior that can be anticipated in a circumstance. It is the threshold that separates what is morally acceptable from what is not. The minimum ethical standard is essentially a set of standards that govern acceptable behaviour in various domains of human interaction and activity. Business ethics refers to the principles, values, and rules that guide acceptable behaviour in a company or organization. Ethical issues are frequently encountered in the workplace and have the potential to create problems for the organization and its staff. The minimum ethical standard is the lowest level of ethical conduct that an organisation should aim to maintain. It establishes the ethical conduct that is required and provides guidance to employees on what is considered acceptable or not.
Therefore, when making a business decision with ethical concerns, merely complying with the law is referred to as the minimum ethical standard.
To know more about business decision, visit:
https://brainly.com/question/30549799
#SPJ11
State the disruption features of Blockchain technology to the
traditional finance. What is Defi and how it would affect financial
markets? What is NTF and what do you think"
Blockchain technology has the potential to completely disrupt traditional finance. The decentralized nature of the technology removes the need for intermediaries, reducing costs and increasing transparency.
Blockchain can be used to create secure, tamper-proof ledgers for transactions, removing the need for third-party verification. Decentralized Finance (DeFi) is a new movement that is built on the blockchain technology. DeFi seeks to create a transparent and open financial system where anyone can access financial services without relying on intermediaries. DeFi aims to provide users with more control over their assets and lower transaction fees.
Non-fungible tokens (NFTs) are unique digital assets that can represent anything from art to collectibles. NFTs are created using blockchain technology and provide a way for creators to monetize their work and provide collectors with a unique, one-of-a-kind asset. NFTs have the potential to revolutionize the art world by providing creators with a way to monetize their work and providing collectors with a unique, provable asset. In conclusion, blockchain technology has the potential to completely disrupt traditional finance by removing intermediaries, reducing costs, and increasing transparency. DeFi and NFTs are two examples of how blockchain technology is being used to create new financial systems and opportunities. DeFi has the potential to disrupt traditional financial markets by providing users with more control over their assets and lower transaction fees. NFTs have the potential to revolutionize the art world by providing creators with a way to monetize their work and providing collectors with a unique, provable asset.
To know more about Blockchain visit :-
https://brainly.com/question/30793651
#SPJ11
accepted. Question #1 (30 Marks) Amherst Metal Works produces two types of metal lamps. Amherst manufactures 20,000 basic lamps and 5,000 designer lamps. Its activity-based costing system uses two indirect-cost pools. One cost pool is for setup costs and the other for general manufacturing overhead. Amherst allocates setup costs to the twolamps based on setup labour-hours and general manufacturing overhead costs on the basis of directmanufacturing labour-hours. It provides the following budgeted cost information. Basic Designer Total Direct materials per lamp $ 85 Direct manufacturing labour hours per lamp 0.5 hours 0.6 hours $ 20 $ Direct manufacturing labour rate per hour Set up costs 114,000 Lamps produced perbatch 250 50 Setup-hours per batch 1 hour 3 hours General manufacturing overhead costs 130,000 Required:Calculate the total budgeted costs of the basic and designer lamps using Amherst's activity- based costing system. 1. What is the budgeted setup rate per hour? (3 marks) 2. What is the overhead rate for genera manufacturing overhead? (3 marks) 3. Nowcalculate the budgeted direct costs of basic and designer lamps if Amherst allocates overhead costs in each department using activity based costing. Then complete the indirect allocation of costs for the basic and designer lamps. Lastly, in each case calculate the totals for both types of lamps combined. (24 marks) 15 20
In Question #1, Amherst Metal Works uses an activity-based costing system to allocate costs to its basic and designer lamps.
The company has two indirect-cost pools for setup costs and general manufacturing overhead.
The budgeted cost information is provided, including direct materials per lamp, direct manufacturing labor hours, direct manufacturing labor rate, setup costs, lamps produced per batch, setup hours per batch, and general manufacturing overhead costs.
The task is to calculate the budgeted costs for the basic and designer lamps, including the setup rate per hour, overhead rate for general manufacturing overhead, and the budgeted direct costs using activity-based costing.
To calculate the budgeted setup rate per hour, divide the total setup costs by the total setup hours per batch. This will provide the cost per setup hour for each type of lamp. The overhead rate for general manufacturing overhead is calculated by dividing the total general manufacturing overhead costs by the total direct manufacturing labor hours for both types of lamps. This will give the cost per direct manufacturing labor hour. To calculate the budgeted direct costs of the lamps using activity-based costing, allocate the overhead costs to each lamp type based on the setup labor hours and direct manufacturing labor hours. Add the allocated overhead costs to the direct materials and direct manufacturing labor costs to obtain the budgeted direct costs for each type of lamp. Finally, calculate the totals for both types of lamps by summing up the individual costs for the basic and designer lamps.
To learn more about budgeted click here brainly.com/question/31952035
#SPJ11
the+four+largest+firms+account+for+approximately+90%+of+internet+search+activity.+the+internet+search+engine+industry+would+be+best+classified+as+a(n)+++++++++++++.
The internet search engine industry, where the four largest firms account for approximately 90% of the search activity, would be best classified as an oligopoly. An oligopoly is a market structure in which a small number of large firms dominate the market, resulting in high levels of market concentration and reduced competition.
In this case, the dominance of the four largest firms in the internet search engine industry indicates that there are significant barriers to entry and limited opportunities for smaller firms to compete effectively. Therefore, consumers may have fewer choices and may be subject to higher prices, as the dominant firms have significant market power and can influence the market conditions.
An oligopoly is a market structure in which a few large firms dominate the market, controlling a significant portion of the market share. In this case, the four largest firms account for 90% of the internet search activity, indicating that they have substantial control over the industry.
To know more about oligopoly visit:-
https://brainly.com/question/18686878
#SPJ11
On January 1, 2020, Punk Ltd purchased 10% of the outstanding 1,000,000 common shares of Sunk for $200,000. Punk considers this investment to be a non-strategic investment. At the December 31, 2020 year end, the fair value of this investment was $208,000. Sunk's profit in 2020 was $100,000. Sunk paid a dividend of S.60 per common share. On January 1, 2021, Punk decided to buy an additional 25% of Sunk's 1,000,000 common shares for $500,000. This second purchase allowed Punk to significantly influence Sunk. In 2021, Sunk's profit was $140,000. Sunk paid dividends of S.50 per common share in 2021.Required: Make journal entries for 2020 and 2021 on Punk's books with respect to the Investment in Sunk.
To record the journal entries for 2020 and 2021 on Punk Ltd's books with respect to the Investment in Sunk, we need to consider the changes in ownership percentage and the fair value of the investment.
Here are the journal entries:
2020:1. To record the initial investment:
Investment in Sunk 200,000 Cash 200,000
2. To record the fair value adjustment at year-end:
Investment in Sunk 8,000 Fair value adjustment - Investment 8,000
3. To record the share of Sunk's profit:
Investment in Sunk 10,000 Equity in earnings of Sunk 10,000
4. To record the dividend received from Sunk:
Cash 60,000 Investment in Sunk 60,000
2021:
5. To record the additional purchase of shares:Investment in Sunk 500,000
Cash 500,000
6. To record the share of Sunk's profit:Investment in Sunk 35,000
Equity in earnings of Sunk 35,000
7. To record the dividend received from Sunk:Cash 50,000
Investment in Sunk 50,000
Note: The fair value adjustment for 2021 is not recorded in these journal entries since it's not mentioned in the information provided. However, if there is a change in fair value, an appropriate adjustment should be made.
These journal entries reflect the initial investment, the fair value adjustments, the recognition of equity in earnings based on Punk's ownership percentage, and the receipt of dividends from Sunk.
Learn more about purchase here:
https://brainly.com/question/31035675
#SPJ11