describe the motion of the fireball in the air

From the graph, it is clear that, the velocity is at a time of 1 s is highest. The velocity at 1 second corresponds to 1250 km/hr. Then it decreases with time.

The velocity - time graph shows the change in velocity with respect to time. The velocity is placed in y -axis and time is given in x - axis. The slope of the curve in velocity - time graph gives the acceleration of the object.

Similarly, the position of the object in meter after a t seconds can be determined from the velocity - time graph. It is the rate of change in velocity of the object.

From the graph, it is clear that, the curve has its peak at 1 second. After that the peak descends down. Hence, the maximum velocity of the car is at a time of 1 second at which the velocity is 1250 km/hr.

Find more on velocity - time graph :

https://brainly.com/question/28357012

#SPJ7

Answer:

I'm not 100% sure, but I think the answer would be the first one because there's a force pushing the object in every direction, so they would cancel eachother out and make the object stay in the same place.

Explanation:

pls vote brainliest

Explanation:

hope this answer was helpful

Answer:

The answer is the 4th one

Explanation:

Good luck man

Answer:

The combined force of the catapult and engines is 44545.455 newtons.

Explanation:

Let suppose that platform of the aircraft carrier is horizontal, such that changes in gravitational potential energy can be neglected. In addition, effects of non-conservative forces are neglected. By using Principle of Energy Conservation and Work-Energy Theorem we find that steam catapult-jet aircraft is represented by:

[tex]K_{1}+W_{1\rightarrow 2} = K_{2}[/tex] (1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final translational kinetic energies of the jet fighter, measured in joules.

[tex]W_{1\rightarrow 2}[/tex] - Work done on the jet fighter due to the combined force of the catapult and engines, measured in joules.

By applying definitions of translational kinetic energy and work, we expand and simplify the equation above as follows:

[tex]F\cdot \Delta s = \frac{1}{2}\cdot m\cdot (v_{2}^{2}-v_{1}^{2})[/tex]

[tex]F = \frac{m\cdot (v_{2}^{2}-v_{1}^{2})}{2\cdot \Delta s}[/tex] (2)

Where:

[tex]F[/tex] - Combined force of the catapult and engines, measured in newtons.

[tex]m[/tex] - Mass of the jet fighter, measured in kilograms.

[tex]\Delta s[/tex] - Length of the catapult, measured in meters.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final speeds of the jet aircraft, measured in meters per second.

If we know that [tex]m = 4000\,kg[/tex], [tex]v_{1} = 0\,\frac{m}{s}[/tex], [tex]v_{2} = 70\,\frac{m}{s}[/tex] and [tex]\Delta s = 220\,m[/tex], then the combined force of the catapult and engines is:

[tex]F = \frac{(4000\,kg)\cdot \left[\left(70\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (220\,m)}[/tex]

[tex]F = 44545.455\,N[/tex]

The combined force of the catapult and engines is 44545.455 newtons.

The combined force of the catapult and engines is 44,545.5 N.

The given parameters;

The combined force of the catapult and engines is determined by applying work energy theorem as shown below;

[tex]W = \Delta E\\\\Fd = \frac{1}{2}m(v^2 -u^2) \\\\220F = \frac{1}{2}(4000)(70^2 - 0^2) \ \\\\220 F = 9,800,000\\\\F = \frac{9,800,000}{220} \\\\F = 44,545.5 \ N[/tex]

Thus, the combined force of the catapult and engines is 44,545.5 N.

Learn more here:https://brainly.com/question/10063455

Answer:

i think the answer is solar,

Explanation:

because it is a natural resource im sorry if im wrong

Answer:

[tex]g_2=\dfrac{7}{8}g[/tex]

Explanation:

G = Gravitational constant

M = Mass of planet

R = Radius of planet

Acceleration due to gravity on first planet

[tex]g=\dfrac{GM}{R}[/tex]

Assuming that the planets have the same mass density [tex]\rho[/tex]

Density of first planet

[tex]\rho=\dfrac{M}{V}\\\Rightarrow \rho=\dfrac{M}{\dfrac{4}{3}\pi R^3}\\\Rightarrow M=\rho \dfrac{4}{3}\pi R^3[/tex]

Density of second planet

[tex]\rho=\dfrac{M_2}{V_2}=\dfrac{M_2}{\dfrac{4}{3}\pi R^3-\dfrac{4}{3}\pi (0.5R)^3}\\\Rightarrow \rho=\dfrac{M_2}{\dfrac{4}{3}\pi R^3(1-\dfrac{1}{2^3})}\\\Rightarrow \rho=\dfrac{M_2}{\dfrac{4}{3}\pi R^3(1-\dfrac{1}{8})}\\\Rightarrow \rho=\dfrac{M_2}{\dfrac{4}{3}\pi R^3(\dfrac{7}{8})}\\\Rightarrow M_2=\rho\dfrac{4}{3}\pi R^3(\dfrac{7}{8})\\\Rightarrow M_2=M\dfrac{7}{8}[/tex]

Acceleration due to gravity on the second planet

[tex]g_2=\dfrac{GM_2}{R}\\\Rightarrow g_2=\dfrac{GM\dfrac{7}{8}}{R}\\\Rightarrow g_2=\dfrac{7}{8}g[/tex]

The acceleration due to gravity of the planet would be [tex]\dfrac{7}{8}[/tex] times the acceleration due to gravity on the first planet.

We are given:

Mass of the Paint bucket (with paint) = 7000 grams

Mass of the paint bucket (without paint) = 500 grams

Volume of Paint in the Bucket = 5000 cm³

Mass of Paint in the Bucket:

To get the mass of the paint in the bucket, we will subtract the mass of the bucket from the mass of the paint bucket (with paint)

Mass of Paint = Mass of Paint bucket (with paint) - Mass of the paint Bucket (without paint)

Mass of Paint = 7000 - 500

Mass of Paint = 6500 grams

Density of the Paint:

We know that density = Mass / Volume

Density of Paint  = Mass of Paint / Volume occupied by Paint

Density of Paint = 6500/5000

Density of Paint = 1.3 grams / cm³

Answer:

Explanation:

v = u + at

v is final velocity , u is initial velocity , a is acceleration and t is time .

here v = 0 , u = 13 m /s , t = 14 s

putting the values

0 = 13 + 14 a

a = 13 / 14 m /s²

= - .9286

= -  0.929 m /s²

Answer:

c

Explanation:

because whatever elements are used like gas uses water evaporation so yeah

Answer:

(A) Space between particles!

Explanation:

Solids can hold their shape because their molecules are tightly packed together!

Answer:

.....

Explanation:

Answer:

Shape and position

Explanation:

Hope this helps! :)

Answer:

A

Explanation:

The image formed by the concave mirror is always virtual. An enlarged image is caused when the concave mirror is positioned too near to the object.

When a hollow spherical is divided into pieces and the exterior surface of each cut portion is painted, it forms a mirror, with the inner surface reflecting the light.

A concave mirror is a name for this sort of mirror. An enlarged and fake image is caused when the concave mirror is positioned too near to the object.

When the distance between the item and the mirror is increased, however, the size of the image decreases, and a true picture is generated.

The picture created by the concave mirror may be manipulated. The image formed by the concave mirror is always virtual.

Hence, option A is correct.

To learn more about the concave mirror, refer to the link;

https://brainly.com/question/25937699

#SPJ2

Answer:

B. Metallic bonds.

Answer:

This question is incomplete

Explanation:

This question is incomplete because there are some parameters that are missing. However, when calculating the average emf and speed/velocity is provided, then

average emf = Brvl

where Br is the vertical component of the earth's magnetic field (in weber per square meter, Wb/m²)

v is velocity (in m/s)

l is the length (in meter) of the wing span

Answer:

Students need a safe environment to take risks and struggle. It’s uncomfortable to struggle, but struggling—falling down and getting back up—is an important facet to learning. Productive struggle is not about being in pain or becoming frustrated.

Please mark branliest!

Explanation: it shows that your really trying your best and when you mess up its telling you that your actually learning from your mistakes.

Answer:

A mixture is when two or more substances combine physically together.

However, in water, two hydrogen atoms combine with one oxygen atom chemically, forming a new substance that has properties different from hydrogen alone or oxygen alone.

Explanation:

Answer:

The answer is D. In the direction of the wave

Explanation:

I took the test, hope this helps! :)

Answer:

Non-zero digits

Explanation:

umm (ꏿ﹏ꏿ;)

Answer:

There's three rules on determining how many important quantities are in a number: Non-zero digits are always predominant. Any zeros between two significant digits are always major. The final zero or dangling zeros in the decimal segment are really only important.

I hope this answered your question, have a nice day!

Complete question:

A 16-V battery powers a series circuit that contains two lightbulbs. The voltage across the first lightbulb is 12-V.

a. What fractional part of the circuit's total energy is transformed in the first lightbulb? Simply your answer.

b. What fractional part of the circuit's total energy is transformed in the second lightbulb? Simply your answer.

Answer:

(a) Fraction of energy of the first bulb in the total energy of circuit is 3/4

(b) Fraction of energy of the second bulb in the total energy of circuit is 1/4

Explanation:

Given;

total voltage across the series circuit, [tex]V_T[/tex] = 16 V

voltage across the first light bulb, V₁ = 12 V

The voltage across the second light bulb is given by;

V₂ = [tex]V_T[/tex] - V₁

V₂ = 16 V - 12 V

V₂ = 4 V

The total power across the circuit is given by;

P = I[tex]V_T[/tex]

P = 16I

Where;

I is the constant current in the circuit

(a)

power in the first light bulb is given by;

P₁ = 12I

Fraction of this power in the total energy of circuit is given by;

[tex]\frac{P_1}{P} = \frac{12I}{16I} = \frac{3}{4}[/tex]

(b)

power in the second light bulb is given by;

P₂ = 4I

Fraction of this power in the total energy of circuit is given by;

[tex]\frac{P_2}{P} = \frac{4I}{16I} = \frac{1}{4}[/tex]

Answer:

2.51 m/s

Explanation:

Given that,

Angular speed of a fan, [tex]\omega=0.5\ rev/s = 3.14\ rad/s[/tex]

Length of the fan arm, r = 0.8 m

We need to find the speed of a point on the end of the fan arm at this time. Let v is the speed. It is given in terms of angular speed is given by :

[tex]v=r\omega\\\\v=0.8\times 3.14\\\\v=2.51\ m/s[/tex]

So, the required speed is 2.51 m/s.

Answer:

The same as

Explanation:

First of all, they are in a merry go round, which is a circular one. And thus, we would be dealing with circular motions.

The angular velocity of a merry go round, in this instance, is given by

w = Δ/Δt

The formula has nothing whatsoever to do with distance, and as such, both Rasheed and Sofia would have the same angular velocity.

Transferring this further, the angular acceleration is given as

α = Δw/Δt

Remember I said the velocity has nothing to do with distance, well, so does the acceleration as we can see from the formula stated. And therefore, both Rasheed and Sofia would have the same angular acceleration

Answer: Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s.

Explanation:

Answer:

T = 12732 [N]

Explanation:

To solve this problem we must use newton's second law which tells us that the sum of forces on a body is equal to the product of mass by acceleration.

By means of the attached free body diagram, we can better understand the solution to this problem.

As we see in the diagram the tension Force T lifts the car upwards so the movement is upwards. Therefore we have two forces one upward (positive) of the force T and the other negative downward due to the weight of the vehicle.

As the movement is up the acceleration is also up (with a positive sign).

ΣF = m*a

where:

F = forces [N] (units of Newtons)

m = mass = 1200 [kg]

a = acceleration = 0.8 [m/s²]

T - 1200*9.81 = 1200*(0.8)

T = 12732 [N]

Answer:

12,720

Explanation:

Answer:

The value is  [tex]H = 0.036 \ kg/m^3[/tex]

Explanation:

From the question we are told that

   The saturation density of air is [tex]\rho = 0.04 \ kg/m^3[/tex]

   The temperature for this saturation density to occur  [tex]T_s = 96^o F[/tex]

    The relative humidity at this temperature is  [tex]R_h = 90\% = 0.90[/tex]

Generally the relative humidity is mathematically represented as

      [tex]R_H = \frac{H}{\rho}[/tex]

Here H represents humidity

=> [tex]0.90 = \frac{H}{0.04}[/tex]

=>  [tex]H = 0.90 * 0.04[/tex]

=>  [tex]H = 0.036 \ kg/m^3[/tex]

AnswerAmontons's law. If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. ... If the gas volume is decreased, the container wall area decreases and the molecule-wall collision frequency increases, both of which increase the pressure exerted by the gas (Figure 1).:

Explanation: