Denise is working on a report in an Access file, as shown below.


Denise would like to print the report as "Relationships for Orders2.” Which steps should Denise follow to complete this task?


a. She should click on the Design View icon and click Print.

b. She should click the Print icon, select the printer, and click OK.

c. She should click on the Design View icon, select the printer, and click OK.

d. She should click the Print icon, click OK, save the file, and click Print.

The option that is true about subtype entities is option B: All subtypes of a supertype must have the same attributes.

What are the characteristics required for subtypes?

The Definitions must be used to support subtypes and supertypes. Attributes can exist for both supertypes and subtypes. Subtypes are given properties specific to them; common attributes are also given to those subtypes.

Hence, one should know that a supertype's subtypes must share the same characteristics. Subtypes might not coexist. To prevent a situation where some properties must be null, subtypes are employed.

Learn more about subtype entities from

https://brainly.com/question/28901187
#SPJ1

See full question below

Which of the following is not true about subtype entities?

The supertype and subtypes will have the same identifier.

All subtypes of a supertype must have the same attributes.

Subtypes may be exclusive.

Subtypes are used to avoid a situation in which some attributes are required to be null.

Path sharing in 802.11 standards is accomplished via the Ethernet protocol and CSMA/CA.

To learn more about Ethernet  refer,

https://brainly.com/question/26956118

#SPJ4

It is TRUE to state that  Frame Relay (FR) consists of variable-sized data frames, whereas  Asynchronous Transmission Mode (ATM) is comprised of fixed cell sizes. (Option C)

Frame Relay is a defined wide area network technology that uses packet switching to specify the physical and data connection levels of digital telecommunications channels.

Frame Relay is a packet-switching network technology that operates at the network's data connection layer. It is used to link LANs and to carry data over Wide Area Networks (WANs).

Asynchronous Transfer Mode is a telecommunications standard created by the American National Standards Institute and the International Telecommunication Union-T for the digital transfer of various types of traffic.

Asynchronous transfer mode (ATM) is a wide-area network (WAN) technique that effectively and flexibly arranges information into cells; it is asynchronous in the view that the recurrence of cells relies on the needed or instantaneous bit rate.

Learn more about  Asynchronous Transmission Mode:
https://brainly.com/question/7475174
#SPJ`1

Motor programming involves a pattern of feedback, control, and modification of movements. Specifically, proprioceptive sensory information is sent to the cerebellum, which then sends corrective feedback to the cerebral nuclei and primary motor cortex, so the movements can be adjusted.

In Science, a feedback loop can be defined as a biological process through which the output of a system either inhibits (negative feedback) or amplifies (positive feedback) the body system, depending on the surrounding conditions.

Under motor programming, there are several patterns of feedback, control, and modification of movements such as the transmission of proprioceptive sensory information to the cerebellum, which is saddled with the responsibility of sending or transmitting corrective feedback to the cerebral nuclei and then, the primary motor cortex, in order to make it possible for the movements of a living organism to be adjusted.

Read more on feedback loop here: brainly.com/question/28386507

#SPJ1

Complete Question:

Motor programming involves a pattern of feedback, control, and modification of movements. Specifically, proprioceptive sensory information is sent to the _____________, which then sends corrective feedback to the cerebral nuclei and _____________ cortex, so the movements can be adjusted.

Answer:storage

Explanation: this is the answer b/c any data that enters the memory of a computer is STORAGE

( hope this helped )

The Sales workbook is open. a formula in cell B8 that generates a unique transaction number. and the following outlines all procedures and formulas.

Goto cell B8 in Sales workbook and Type function “=C8&D8&LEFT(E8,1)” Now drag the Auto Fill handle for all the cells in column B

Goto cell G8 and Type function “=IF(AND(E8="Credit",F8>=4000),"Flag"," "). Now drag the Auto Fill handle for all the cells in column G

Step1: Goto cell D5, Select Data Validation from Data menu.

Step 2: Choose Data Validation option. A Data Validation window opens.

Step 3: In Settings tab, Select List from the drop down menu under Allow and Type “=$D$7:$F$7” under Source.

Step 4: Click on OK

Goto cell B5 and Type “30038C”. Then Goto cell D5 and Select Quantity from the drop down menu

Goto cell F5 and Type “=INDEX($A$7:$F$32,MATCH(B5,$B$7:$B$32,0),MATCH(D5,$A$7:$F$7,0))”

Learn more about Data Validation here:

https://brainly.com/question/29033397

#SPJ4

The hash table collision-handling schemes could tolerate a load factor above 1 and which could not is option A: Hash Tables need to deal with collisions. Which of the hash table collision- handling schemes could tolerate a load factor above 1 and which could not a. Hint: Think about which of the schemes use the array supporting the hash table exclusively and which of the schemes use additional storage external to the hash table

A hash table is a type of data structure that allows for constant-time direct access to its components while storing data in key-value format. Associative hash tables are those where each key only appears once in the data, thus the name.

Therefore, one can say that It is a type of abstract data that associates values with keys. An array of buckets or slots are used in a hash table to provide an index, also known as a hash code, from which the requested data can be retrieved. The key is hashed during lookup, and the resulting hash shows where the relevant value is kept.

Learn more about hash table from

https://brainly.com/question/29510384
#SPJ1

See full question below

Hash Tables need to deal with collisions. Which of the hash table collision- handling schemes could tolerate a load factor above 1 and which could not? a. Hint: Think about which of the schemes use the array supporting the hash table exclusively and which of the schemes use additional storage external to the hash table. b. Assume you want to hash the keys 12, 44, 13, 88, 23, 94, 11, 39, 20, 16, 5 and store them in a hash table. Implement linear probing, and double hashing to handle collision. Print out the positions of keys stored. Hash functions for linear probing and double hashing as described as follows. Linear probing: h(k) (3k+5) mod 11 Double hashing: hi(k) (3k+5) mod 11, h2(k)-7 (k mod 7)

The four major activities associated with software configuration management are:

1. Being aware of the necessary management of the policy, process activities, and producing artifacts

2. Establishing the framework that must be utilized to manage these artifacts.

3. Identifying and incorporating any tools that need to be expanded to make managing this item easier.

4. Providing instruction and making sure that the regal and configuration management prostheses are used and followed,

The term Program configuration management, a subset of the broader, multidisciplinary area of configuration management, is the activity of monitoring and regulating changes to the software. SCM procedures is one that is made up of baseline creation and revision control.

Therefore, one can say that additionally referred to as "software change management," Version control, as well as security administration of software assets, software promotion, quality reviews, and software distribution are all part of the software lifecycle management (SCM) methodology.

Learn more about software configuration from

https://brainly.com/question/17080816
#SPJ1

Core goals are seen as the driving forces of motivating a client toward certain activities and provide an individual's fundamental sense of identity, according to LTCC model.

LTCC technology uses ceramic substrate tapes or sheets to create multilayer circuits. Each sheet or tape is coated with the appropriate conductive, dielectric, and resistive pastes before being laminated together and fired (often in a carefully regulated oven or kiln) in one step.

The end result is a monolithic, hermetic structure. A typical LTCC model is made up of multiple dielectric layers, low-loss conductors that have been screen-printed or photographed, baluns, resistors, and capacitors that are embedded, as well as viaholes for connecting the various layers.

Before firing, each layer can be checked to replace any circuits that are damaged, increasing yield.

Learn more about LTCC

https://brainly.com/question/16179312

#SPJ4

The statement "with streaming stored multimedia applications, the user can pause, fast-forward, skip ahead the audio/video" is false.

Interactive software that integrates several media at once to inform a viewer is known as a multimedia application. You can utilise a variety of media formats, such as text, images (photographs, illustrations), and audio (music, sounds).

The entertainment industry is one of the most important and well-known places where multimedia is used. Special effects and animations, like VFX, are increasingly used to create movies, commercials, and short clips.

Therefore, the statement is false.

To learn more about multimedia applications, refer to the link:

https://brainly.com/question/27960328

#SPJ1

The question is incomplete. Your most probably complete question is given below:

True/false

Enable windows recovery environment in the steps given below is one of the ways for the question could not find the recovery environment insert your windows installation or recovery media and restart your pc with the media

What are the ways to enable windows recovery environment?

1. In the Windows search box, type "CMD," then click Enter. Find the Command Prompt in the list of results, then right-click it and choose "Run as administrator."

2. Enter "reagentc /info" (without the quotations).

3. To enable it again if it has been disabled, simply type "reagentc /enable."

Other way is to fix  corrupted file:

The Windows recovery sector is typically where you may find the Winre.wim file. Because it lacks a drive letter, Windows File Explorer is unable to display it. You must use Disk Management or Diskpart.exe to give the recovery partition a drive letter in order to view the Winre.wim file.

On your system disc, there may occasionally be no recovery partition. The Winre.wim file is then typically found in the hidden subdirectory C:Recovery.

You can search the file on your computer to find the Winre.wim file. To find the Winre.wim file on the C: disc, enter the following command into an elevated Command Prompt:

Hence to conclude if the windows recovery is done we can find the recovery environment to insert windows

To know more on windows recovery options follow this link:

https://brainly.com/question/26083546

#SPJ4

Answer:

def main():

   word = input("Please enter the next word: ")

   count = 0

   while word != "DONE":

       count += 1

       print("#{}: You entered the word {}".format(count, word))

       word = input("Please enter the next word: ")

       print("A total of {} words were entered.".format(count))

main()

Service Set Identifier (SSID) is the element that the wi-fi developers create to use as another level of naming to apply to the bss or ibss to help the connection happen.

To connect computers, tablets, smartphones, and other devices to the internet, Wi-Fi is a wireless technology that is used.

Wi-Fi refers to a radio signal that is transmitted from a wireless router to a nearby device, which then converts the signal into information that can be seen and used. To the router, which is wired or connected via cable to the internet, the device sends a radio signal back.

In a nutshell, a Wi-Fi network is just a wireless router that distributes an internet connection to a number of devices in a building or home. The router, which is directly connected to your internet modem, serves as a hub to disseminate the internet signal to all of your Wi-Fi capable devices. As long as you are in your network's service area, this gives you the freedom to stay connected to the internet.

Learn more about Wi-Fi

https://brainly.com/question/13267315

#SPJ4

The program that reads in the name and salary of an employee will be:

name = input("Enter name : ")

wage = float(input("Enter wage : "))

hours = int(input("Enter hours : "))

if hours <= 40:

tpay = hours * wage

else:

nhours = hours - 40

tpay = 40 * wage

nhours += nhours * 1/2

tpay += nhours * wage

print("Total pay is : $%s" % tpay)

A program is a specific set of ordered operations that a computer can perform. It contains a one-at-a-time sequence of instructions that the computer follows. Typically, the program is saved in a location accessible to the computer.

A computer program is a set of instructions written in a computer programming language that instructs the computer to perform a specific task. The above program illustrates the salary.

Learn more about program on:

https://brainly.com/question/26642771

#SPJ1

Popular FTP and SFTP software for Windows is called WinSCP.

To learn more about SFTP refer to:

https://brainly.com/question/28089419

#SPJ4

The two methods can be used to delete a table from a query once the user has clicked on the table are: "right-clicking and selecting Delete, or clicking Delete on the keyboard" (Option A)

Simply open the table in Datasheet view, pick the fields (columns) or records (rows) you wish to delete, and then hit DELETE. It should be noted that the material in this article is only meant to be used with desktop databases. In Access web applications, you cannot remove or amend queries.

A query is an information or data request from a database table or databases. This data can be generated as Structured Query Language (SQL) outputs or as pictorials, graphs, or more complex results, such as trend analysis, utilizing data-mining tools.

Learn more about Query:
https://brainly.com/question/16349023
#SPJ1

These compatibility issues can be fixed for an app by using the capabilities included in windows 10 are:

What is compatibility issues in Windows 10?

Some functions' implementations may change as the Windows operating system evolves to support new technology and functionality. This might cause issues for some applications that rely on original-implementation. You can avoid compatibility issues by creating a specific application fix for a specific version of an application using the Microsoft Windows Application Compatibility (Compatibility Fix) infrastructure.

To learn more about Windows 10, visit: https://brainly.com/question/28847407?referrer=searchResults

#SPJ4

The term that is NOT an example of a game mechanic is option D. listening to the game sounds.

Game mechanics are the guidelines or rules that control and direct the player's actions and the game's reactions in both tabletop and video games. A ludeme, or play element, is similar to the L-shaped move of the knight in chess while a rule is a set of instructions on how to play.

Therefore, The rules and procedures that direct the player and determine how the game will react to their moves and actions are known as the game's mechanics. You design the game's mechanics, which determine how it will function for the players.

Learn more about game from

https://brainly.com/question/29411392
#SPJ1

Answer: D

Explanation:

To any of you who are also taking Game Design, I have respect for you.

UNIX is a multi-user operating system, which is a collection of applications that manages a computer and allows users to interact with its hardware and software.

To learn more about UNIX  refer :

https://brainly.com/question/4837956

#SPJ4

A Universal Threat Management (UTM) device is a multipurpose security tool that may act as a VPN connection point for remote users as well as a firewall, proxy filter, email filter, and network access control service provider.

In the past, businesses have used a variety of point security technologies to counteract particular cybersecurity threats. A company might have a separate firewall, antivirus software, etc. Because a UTM solution can handle a variety of network security tasks in a single appliance, it reduces the requirement for this group of independent solutions.

At the network perimeter, unified threat management tools are set up to scan all incoming and outgoing data. The UTM system gains the required visibility into network packets via deep packet inspection (DPI), allowing it to identify inbound threats and deny web requests to inappropriate or dangerous websites. A security team can also control each of these aspects using a single dashboard that UTM offers.

To learn more about Universal Threat Management (UTM) click here:

brainly.com/question/6957939

#SPJ4

Proactive service desk is kind of service desks that recognize information as a resource and try to prevent incidents and prepare for the future. A service desk is the main contact point between users/service providers, handling issues, refunds, and more.

Proactive customer service refers to send what customers require before they know they need it. It's going one step more away than what the customer would expect, solving help, advice, or education to assist customers before they create a request or complain. Service desk refers to the particular point of contact between the service provider and the users. A kind of service desk manages incidents and service requests, and also handles communication with the users.

Learn more about service desk, here https://brainly.com/question/24850891

#SPJ4

A method that always produces a problem solution, though not necessarily very efficiently, is known as an algorithm.

An algorithm is a step-by-step procedure for solving a problem or achieving a specific goal. It is a set of instructions that, if followed in the correct order, will always produce the same result.

Algorithms are often used in computer programming and other fields where precise, repeatable steps are necessary to solve a problem or accomplish a task.

Algorithms are typically designed to be efficient and effective, but they may not always be the fastest or most efficient way to solve a problem. Other approaches, such as heuristics, may be faster but less reliable, as they may not always produce a solution.

To Know More About heuristics, Check Out

https://brainly.com/question/14718604

#SPJ1

When republishing your content, the way that you can  make sure the republished post stands out in contrast to your original post in search engine result listings is option A: Update the headline.

A unique title is required for each piece of content that is republished. Simply changing one word can accomplish this, making each post stand out, especially in various web searches.

There are a number approaches for deciding which content to republish, however they mostly fall into two categories: Finding content that is interesting to and likely to be shared among your readers can be done using email conversion data and social media performance. Find the pages on your website that have a lot of internal links.

Therefore, the use of option A will help in republishing your content.

Learn more about headline from

https://brainly.com/question/943780
#SPJ1

See options below

Update the headline.

Use a new author.

Add sub-headings to each section.

All of the above.

The computer hardware to be tested by penny are:

Correct answer: letter B, D y E.

Penny needs to test the computer hardware (Hard Drive, RAM, Processor) to ensure with the Windows 8.1 operating system, regardless of whether she chooses a 32-bit or 64-bit version. Penny should also check the amount of RAM and the size of the hard drive to ensure the system will have enough space to run the operating system and any applications that may be installed.

Computer hardware refers to the physical components of a computer, such as:

As opposed to computer software, which are the programs and applications that run on the hardware.

Penny is setting up computers at a local nonprofit organization. The computers were donated by a company that was upgrading to new computers. Penny must decide whether to use a 32-bit or 64-bit version of Windows 8.1. What hardware on the computers should Penny check? Select all that apply:

A) Video card

B) Hard drive

C)Motherboard

D) RAM

E) Processor

F) Network card

Learn more about computer hardware:

https://brainly.com/question/3186534

#SPJ4

Answer:

1. Requiring a Token or Authentication Code

2. Requiring Biometric Authentication

Explanation:

1. Requiring a Token or Authentication Code: This method requires users to provide an additional form of verification (usually a code sent to their phone or email) when logging into a system.

2. Requiring Biometric Authentication: This method requires users to provide biometric data such as fingerprints, a retinal scan, or voice recognition when logging into a system. This data is unique to each individual and provides an extra layer of security.

Information is sent by chemicals in the brain, as opposed to electricity in computers.They both transfer data.

In other words, the metaphor of the brain as a computer represents a reductionist view of cognition, which holds that all cognitive functions—such as perception, decision-making, motor control, etc.—are shared by all members of the animal kingdom.

According to Hinrichs, the brain, which gave rise to the mind, is a computer. The brain is a computational device, but it is not like a computer; it is a different kind of computer.

Therefore, It is actually made up of simple cognitive processes, similar to those used by educated people to perform calculations.

Learn more about computer analogy here:

https://brainly.com/question/18943642

#SPJ1

The McCandless method recommends giving an audience an overview of the information first, such as an elevated summary or a list of the main points, before providing a visualization tool.

How does visualization work?

The graphic depiction of data and information is the focus of the multidisciplinary topic of data and information visualization. When interacting with large amounts of data or information, like a time series, it is especially effective. In order to improve cognition, different aspects of abstract data are also being studied. Both non-numerical and numerical data, including such text and geospatial information, are included in the abstract data.

To know more about Visualization
https://brainly.com/question/29430258
#SPJ4

We can include "old demand data" data source in the forecasting process while creating a time series–based forecast for the amount of soda to be sold in the cafeteria in the next week.

What is Data Source?

A data source can be the initial location where data is created or where physical information is first digitized, but even the most refined data can serve as a source if another process accesses and uses it. A database, a flat file, live measurements from physical devices, scraped web data, or any of the numerous static and streaming data services available on the internet are all examples of data sources.

To learn more about Data Source, visit: https://brainly.com/question/14655484?referrer=searchResults

#SPJ4