How many moles of hypomanganous acid, H3MnO4, are contained in 22.912 g?
Answer:
0.188mol
Explanation:
Using the formula as follows:
mole = mass/molar mass
Molar mass of hypomanganous acid, H3MnO4 = 1(3) + 55 + 16(4)
= 3 + 55 + 64
= 122g/mol
Mass of H3MnO4 is given as 22.912 g
Hence;
moles = 22.912 ÷ 122
number of moles = 0.188mol
What is the approximate vapor pressure when the gas condenses at 70°C?
150
5
760
380
Answer:
380
Explanation:
I couldn't find the answer anywhere so this is the correct answer. I got it graded.
Which statement about pollination is
TRUE?
Flowers are always pollinated
by insects.
Pollen is always transferred
from the same flower
When pollination occurs.
pollen sticks to the anther.
When pollination occurs
pollen sticks to the stigma.
Answer:
D; the pollen sticks to the stigma
Explanation:
When a flower is pollinated, the pollen sticks to the stigma. However, it is not always pollinated by insects (birds and other factors can as well), pollen can be transferred from different flowers (as long as they're the same species) and pollination doesn't stick to the anther.
Answer:
d
Explanation:
because when pollution occurs than the insects move to the flower to sick nectar and then pollan giains stuck in the insect body
The diagram above shows the repeating groups of atoms that make up two samples. Will the
properties of the two samples likely be the same or different? (Examples of properties are smell,
color, and the temperature at which a substance melts.)
a
The properties will likely be different because the repeating groups of atoms that make up
each sample are different.
b
The properties will likely be different because there are more repeating groups of atoms in
Sample 2.
c
The properties will likely be the same because the repeating groups of atoms that make up
the two samples have the same number of atoms.
d
The properties will likely be the same because the repeating groups of atoms that make up
the two samples have two of the same types of atoms.
container has 3 moles of gas with a volume of 60 liters and at a temperature of 250 K, Calculate the pressure inside the container in kPa
Answer:
103.98 kpa
Explanation:
Pv= nRT
Where
P= pressure of the system=
n= number of moles= 3 moles
T= temperature= 250 K
Volume of the container= 60 liters
R= 0.0821L.atm/K.mol
Substitute the values
Pv= nRT
P= nRT/ V
= (3×0.0821×250)/60
= 1.026 Atm
1atm= 101325 Pascal
1.026 atm= X
= 103984 pasca
Convert to kilopascal
= 103984 pasca /1000
= 103.98 kpascal
(05.06 MC)
During an experiment, the percent yield of calcium chloride from a reaction was 85.22%. Theoretically, the
expected amount should have
grams What was the actual yield from this reaction? (5 points)
CaCO3 + HCI - CaCl2 + CO2 + H20
been 113
96.3 grams
О 99.0 grams
113 grams
0 121 grams
Answer:
96.3g is the actual yield from this reaction
Explanation:
Have been 113g...
The percent yield of a reaction is defined as one hundred times the ratio between actual yield (Our incognite) and the theoretical yielf (113g). The equation is:
Percent yield = 85.22% = Actual Yield / 113g * 100
0.8522 = Actual Yield / 113g
0.8522*113g =
96.3g is the actual yield from this reaction
Answer:
96.3
Explanation:
Just took the test
Add more drink mix until you notice a color change. Have you increased or decreased the concentration? (Higher number means a higher concentration).
Answer:
Increased the concentration
Explanation:
Complete Question
Open the simulation by pushing the play button. Begin by dragging the concentration tester overto the liquid and add drink mix until the concentration reaches approximately 2.oo mol/L. This means there are 2.00 moles of the drink mix in 1 Liter of the solution. Add more drink mix until you notice a color change. Have you increased or decreased the concentration? (Higher number means a higher concentration).
Solution
Drink mix is basically the solute which is added to solvent i.e water.
The higher is the amount of drink mix in the solvent, the higher is the concentration of the solute and hence darker is the color of the drink.
Hence, in the case the concentration of the drink has been increased.
Why is creativity important in scientific investigations?
a. Creative solutions are often needed to solve technical problems.
b. Scientists need to creatively adjust their data to prove their hypothesis.
c. There is no way to test a hypothesis, so creativity is necessary.
d. Most scientific experiments have no data.
Answer:
a. Creative solutions are often needed to solve technical problems.
Explanation:
Science in itself is a voyage of discovery. Scientific investigators focusing on various issues are often working hard to find creative solutions to complex technical problems.
In order to find solutions to all these problems bedeviling humanity, scientific investigators must be quite creative. Creativity is always at the bedrock of finding solutions to the complex technical problems of the world which happens to be the ultimate goal of science.
Hence, creativity is indispensable in scientific investigation and creative solutions are often needed to solve technical problems.
Answer:
a. Creative solutions are often needed to solve technical problems
Explanation:
Scientific investigation is the process using the scientific method which consists of empirical techniques in obtaining answers to question raised and used for driving the investigation
The scientist carrying out the investigation into the new area, is therefore required to be creative in adapting the available resources in answering the questions based on the scientific method
In what sense are photons quantized?
A. Each photon emits more energy than its absorbs
B. Each photon can have multiple frequencies
C. Each photon travels exactly at the same speed of light
D. Each photon has a specific amount of energy
Answer:
Each photon has a specific amount of energy
Explanation:
How many grams are in 3.14 moles of PI₃?
Answer:
[tex]\boxed {\boxed {\sf 1290 \ g \ PI_3}}[/tex]
Explanation:
We want to convert from moles to grams, so we must use the molar mass.
1. Molar MassThe molar mass is the mass of 1 mole of a substance. It is the same as the atomic masses on the Periodic Table, but the units are grams per mole (g/mol) instead of atomic mass units (amu).
We are given the compound PI₃ or phosphorus triiodide. Look up the molar masses of the individual elements.
Phosphorus (P): 30.973762 g/molIodine (I): 126.9045 g/molNote that there is a subscript of 3 after the I in the formula. This means there are 3 moles of iodine in 1 mole of the compound PI₃. We should multiply iodine's molar mass by 3, then add phosphorus's molar mass.
I₃: 126.9045 * 3=380.7135 g/mol PI₃: 30.973762 + 380.7135 = 411.687262 g/mol 2. Convert Moles to GramsUse the molar mass as a ratio.
[tex]\frac {411.687262 \ g \ PI_3}{ 1 \ mol \ PI_3}[/tex]
We want to convert 3.14 moles to grams, so we multiply by that value.
[tex]3.14 \ mol \ PI_3 *\frac {411.687262 \ g \ PI_3}{ 1 \ mol \ PI_3}[/tex]
The units of moles of PI₃ cancel.
[tex]3.14 *\frac {411.687262 \ g \ PI_3}{ 1 }[/tex]
[tex]1292.698 \ g\ PI_3[/tex]
3. RoundThe original measurement of moles has 3 significant figures, so our answer must have the same. For the number we calculated, that is the tens place.
1292.698The 2 in the ones place tells us to leave the 9.
[tex]1290 \ g \ PI_3[/tex]
3.14 moles of phosphorous triiodide is approximately equal to 1290 grams of phosphorus triodide.
Help needed ASAP, I will mark your answer as brainliest.
Answer:
D
Explanation:
^
Answer:
the answer is D
Explanation:
I hope this helped.
Select the ion. HCl H 3O +1 H 2O
Answer:
[tex]H _{3}O {}^{ + } [/tex]
Hydroxonium ion
URGENT!!
which has the largest London dispersion force out of the ones listed
PLZ HELP ILL MARK BRAINLIEST
A glacial moulin increases the rate of ice sheet melting by...
O causing the ice sheet to melt from the middle
O increasing friction between the ice and bedrock
O reducing friction between the ice sheet and the bedrock
O melting the top center of an ice sheet
A gas occupies a volume of 2.50 L at a pressure of 350.0 kPa. If the temperature remains
constant, what volume would the gas occupy at 1750 kPa ?
1. 12.5 L
2. 5.00 L
3. 1.40e+2L
4. 0.500 L
Answer:
V₂ = 0.5 L
Explanation:
Given that,
Initial volume, V₁ = 2.5 L
Pressure, P₁ = 350 kPa
New pressure, P₂ = 1750 kPa
We need to find the new volume if the temperature remains constant. The mathematical relation between P and V is :
[tex]P\propto \dfrac{1}{V}\\\\or\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}[/tex]
Where
V₂ is new volume
So,
[tex]V_2=\dfrac{P_1V_1}{P_2}\\\\V_2=\dfrac{350\times 2.5}{1750}\\\\V_2=0.5\ L[/tex]
So, the new volume is equal to 0.5 L.
What is the volume of NaOH used in each Titration??
Answer:
Titration 1=33.9ml
Titration 2=33.45ml
Titration 3=33.35ml
Explanation:
Volume of NaOH used =Final reading - Initial reading
Titration 1:
Final reading =35.5ml
Initial reading=0.6ml
Volume of NaOH used =34.5ml -0.6ml=33.9ml
Titration 2:
Final reading =34.3ml
Initial reading=0.85ml
Volume of NaOH used =34.3ml -0.85ml=33.45ml
Titration 3:
Final reading =33.8ml
Initial reading=0.45ml
Volume of NaOH used =33.8ml 0.45ml=33.35ml
Hope it helps:)
Identify which reactants is reduced and which is oxidized .
2Au^3+(aq) + 3Cd(s) -> 2au(s) + 3Cd^2+(s)
Please help
Answer:
CD is oxidised
and
Au is reduced
hope helps u
1 Mg (s) + 2 HCl (aq) --> 1 MgCl2 + 1 H2 If 2.50 mol of hydrochloric acid is reacted, how many moles of magnesium chloride is produced?
Answer:
1.25 moles of magnesium chloride are produced
Explanation:
Based on the reaction:
Mg(s) + 2HCl (aq) → MgCl₂(s) + H₂(g)
1 mole of magnesium, Mg, reacts with 2 moles of hydrochloric acid, HCl, to produce 1 mole of magnesium chloride, MgCl₂ and 1 mole of hydrogen gas.
To solve this question we have to tak, from the chemical equation:
2 mol HCl = 1mol MgCl₂
That means, the moles of MgCl₂ produced from 2.50mol HCl are:
2.50 mol HCl * (1mol MgCl₂ / 2mol HCl) =
1.25 moles of magnesium chloride are producedIn an exothermic reaction, will increasing or decreasing the reactant cause the reaction to shift towards the product?
thank you :)
Which oxide is covalent?
A. AsO2 B. K2O
C. CuO D. ZnO
Answer:
A.
Cu Zn K is are metals which form ionic bond with oxygen
More energy can be absorbed by a larger sample of a substance due to its higher mass.
True
or
False
?
Answer:
true
Explanation:
What is the subscript of Carbon? 6 CaCO3
Answer:
subscript is 3
Explanation:
the subscript is the number that is slightly lower than a # which in this case it's O
this indicates that there's 3 oxygen atoms
Answer:
the answer is 1 ♀️
Explanation:
4.) which organic compound has five carbon atom with at least one double bond?
O pentyne
O pentene
O pentane
O butene
Answer:
The answer is pentene.
Explanation:
The nomenclature for an organic compound with 5 carbon atoms will have a -pent prefix.
An organic compound with at least one double bond will have alkene suffix, which is -ene.
Thus, the nomenclature for an organic compound that has 5 carbon atoms with at least one double bond will be pentene.
balance NaHCO3(S) -NaOH(S)+CO(G)
Answer:
NaHCO3(s) → NaOH(s) + CO2(g)
Explanation:
A balanced chemical equation is that in which the number of atoms of each element on the reactant side is equal to the number of atoms of each element on the product side.
Based on the following equation below, each atom on the reactant side matches the ones on the product side, hence, the equation is said to be balanced. The balanced equation is as follows:
NaHCO3(s) → NaOH(s) + CO2(g)
Global climate change is a result of human activity?
Answer:
Yes
Explanation:
Due to pollution, greenhouse gasses, etc
Humans are increasingly influencing the climate and the earth's temperature by burning fossil fuels, cutting down forests and farming livestock. This adds enormous amounts of greenhouse gases to those naturally occurring in the atmosphere, increasing the greenhouse effect and global warming.
Help needed ASAP, I will mark your answer as brainliest.
Answer:
b
Explanation:
b
PLS HELP NO LINKS PLS
Fill in the blank. One chlorine atom from one molecule of chlorofluorocarbon can destroy up to _____ ozone molecules.
100
100,000
10,000
50
Answer:
100,000 Ozone Molecules
Explanation:
I just found this online calculator that got the answer.
Answer:
100,000 is correct
Explanation:
a. Use VSEPR to predict bond angles at the marked atom. The angle is : _______ degrees. The expected hybridization at the marked atom is _____ . b. Use VSEPR to predict bond angles at the marked atom. The angle is : _______ degrees. The expected hybridization at the marked atom is _____ .
Answer: Hello your question is incomplete attached below is the complete question with the missing diagrams
a) The angle = 120°
hybridization = sp2
b) The angle = 120°
hybridization = sp2
Explanation:
a) using VSPER to predict bond angles
Given that there is the presence of 1 double bond to C and 2 single bonds one to C and one to H around the marked atom which equals 3 sets of electrons surrounding the central atom.
hence according to VSPER theory the angle = 120° while the Hybridization = sp2
b) Using VSPER to predict bond angles at marked atom
Given that there is There is 1 double bond to C and 2 single bonds to the different C atoms respectively around the marked atom, which makes 3 sets of electorns surrounding the central atom
hence according to VSPER theory the angle = 120° while the Hybridization = sp2
Why is it important for scientists to use the scientific method?
Answer:
The scientific method attempts to minimize the influence of bias or prejudice in the experimenter. Even the best-intentioned scientists can't escape bias. ... That's the job of the scientific method. It provides an objective, standardized approach to conducting experiments and, in doing so, improves their results.
Answer:
to get used to them
Explanation:
you have to practice them so that they can get into your head
correct name for ZnS
Zinc sulfide (or zinc sulphide) is an inorganic compound with the chemical formula of ZnS. This is the main form of zinc found in nature, where it mainly occurs as the mineral sphalerite.