Answer:
yes
Explanation:
The correct equation for the decomposition of copper carbonate is:
CuCO3 → CuO + CO2
Anna notices that different types of clothing stick together when they are dried in an electric dryer. When the clothes are pulled apart, they make sparks and a crackling sound due to electric forces of attraction. How can Anna reduce the amount the clothing clings together in the dryer?
Add a substance to the wash that reduces the number of charges transferred.
Increase the temperature of the air in the dryer to weaken the electric forces.
Dry more clothes at the same time so that there is less room for electric forces.
Change the charges on the clothes by running the dryer at a faster speed.
Answer:
A: Add a substance to the wash that reduces the number of charges transferred.
Explanation:
The attraction between opposite charges make the clothes attract together. To reduce them Increase the temperature of the air in the dryer to weaken the electric forces. Hence, option A is correct.
What is electric dryer?An electric dryer is used to dry the clothes and hair or other substances using electric current. A substance can have both negative and positive charges. The opposite charges will attract together while the negative charges repel.
By exposing clothes to electric dryer it will gain electrons from the dryer and the positive poles of the clothes will attracts it. The electric current from the dryer will make clothes temporarily polarised.
If temperature increases, the intermolecular force of attraction decreases by making the kinetic energy of molecules raised. Therefore by increasing the temperature of air from the dryer the attraction can be reduced.
To find more on electric charges, refer here:
https://brainly.com/question/9194793
#SPJ6
Atomic Radius________across (left to right) a period and______down a group.
Answer: Decreases across the period and increases down the group
2) Which liberates the most energy?
A) F(g) + e ➡️ F-(g)
B) N(g) +e- ➡️ N-(g)
C) O(g) +e ➡️ O-(g)
D) C(g) +e ➡️ C-(g)
Answer: [tex]F(g)+e^-\rightarrow F^-(g)[/tex]
Explanation:
Electron gain enthalpy is defined as energy released on addition of electron to an isolated gaseous atom.
The amount of energy released will be maximum when the tendency to attract electrons is maximum. As flourine has atomic number of 9 and has electronic configuration of 2,7. It can readily gain 1 electron to attain stable noble gas configuration and hence liberates maximum energy.
[tex]F(g)+e^-\rightarrow F^-(g)[/tex]
What volume (in L) of water vapor will be
produced from the reaction of 4.95 L of ethane
(C2He)?
2C2H6(g) + 702(9) — 4CO2(g) + 6H2O(g)
Answer:
14.85L of water are produced
Explanation:
Based on Avigadro's law, the volume is directly proportional to the moles of a gas.
Based on the equation:
2C₂H₆(g) + 7O₂(g) → 4CO₂(g) + 6H₂O(g)
2 moles of ethane produce 6 moles of H₂O.
Using Avogadro's law: 2L of ethane produce 6L of H₂O.
The addition of 4.95L of ethane are:
4.95L ethane * (6L H₂O / 2L C₂H₆) =
14.85L of water are producedAnswer the question using the equation: HCl(aq)+H2O(l)→H+(aq)+Cl-(aq)+H2O(l)→H3O+(aq)+Cl-(aq) Which product is a Lewis base?
Answer:
Cl-
Explanation:
The equation of the reaction is;
H+(aq)+Cl-(aq)+H2O(l)→H3O+(aq)+Cl-(aq)
Lewis base refers to substances that can donate a lone pair of electrons(e.g OH^-, Cl^- etc) or a pair of nonbonding electrons.(eg NH3, H20 etc). A Lewis base is therefore an electron-pair donor. They are easily recognized because they often have lone pairs or are negatively charged species.
If we look at the products, Cl- is a Lewis base because it is a lone pair donor. We see this more clearly because the specie is negatively charged.
Answer:
Cl
Explanation:
I gave brainlest:: answer this .....
why is productivity greatest near the ocean's surface?
Answer:
Sunlight penetrates the top layers of the ocean, so photosynthesis occurs there. ... Upwelling brings nutrients to the surface.
What element is on period 5 group/family 11
Answer:
47
Ag
Silver
107.87
Explanation:
An atom absorbs radiation. Select the possible changes this could have on the atom:
*it can change the atomic mass
*it can cause the atom to lose an electron
*it can cause the atom to become and ion
*it cause the atom to change element
Answer:
*it can cause the atom to become and ion
what is 20+9-10+67=?
Answer:
86
Explanation:
20 plus 9 equals 29 minus 10 equals 19 plus 67 equals 86
Answer:
86
Explanation:
20+9=29
29-10=19
19+67=86
how many lbs are in 60 oz
Answer:
3 pounds 13 ounces
Explanation:
Math
Answer:
3.75
Explanation:
An atom of the element chromium has an atomic number of 24 and a mass number of 52. How many electrons are in an uncharged atom of chromium?
0
24
28
52
Answer:
24
Explanation:
In an uncharged atom, the number of protons is always equal to the number of electrons. For example, carbon atoms include six protons and six electrons, so carbon's atomic number is 6.
Similarly, since an atom of chromium contains 24 protons, it also contains the same amount of electrons, which is 24.
Answer:
24 is your answer
Explanation:
How does an increase in temperature affect the equilibrium concentration of the underlined substance and K for each of the following reactions?
(c) SO2(g) S(s) + O2(g) DH° = 297 kJ
Explanation:
Due to the positive value of the change in temperature, this is an endothermic reaction.
Since the forward reaction is endothermic, increasing the temperature increases the equilibrium constant (k).
In an equilibrium system, the position of the equilibrium will move in a way to annul the change made to the system. An increase in temperature for an endothermic reaction would favour the reaction, leading to increase in amount of products and decrease in amount of reactants.
Which is Not part of hydrogen's line-emission spectrum?
Answer: Aufbau series.
Explanation:
1.a)concentrated sulphuric acid reacts with ethanol to produce ethene
(i) state the conditions for the reaction
.......................................................................
write the equation of the leads to formation of ethene In (a) (i) above.
.....................................................................................
state the property of sulphuric acid shown in reaction (a)(ii)
...................................................................................
Answer: a) Temperature of [tex]170^0C[/tex]
b) [tex]C_2H_5OH\stackrel{conc H_2SO_4, 170^0C}\rightarrow C_2H_4+H_2O[/tex]
c) dehydrating agent
Explanation:
Ethanol is heated with an excess of concentrated sulfuric acid at a temperature of 170°C to produce ethene.
The balanced chemical reaction is:
[tex]C_2H_5OH\stackrel{conc H_2SO_4, 170^0C}\rightarrow C_2H_4+H_2O[/tex]
Here concentrated sulfuric acid removes a water molecule from ethanol and thus acts as a dehydrating agent.
An increase in the volume of a substance because of an increase in temperature is called
Answer:
Its called contraction.
Explanation:
Suppose you have a mixture of iron filings, sand, and sugar and you want to separate the three. Fill in the materials you expect to see at each step as you perform the actions shown to separate them. The materials you may expect to see are: iron filings, sand, sugar, and sugar water.
Answer:
Explanation:
mixture of iron filings, sand, and sugar
First Step - Iron Fillings
Use a magnet to separate the iron fillings from the mixture. Due to magnetic properties of the iron fillings, the magnets would attract the iron fillings and separate it from the mixture.
Second step - Sand
Place the sand and sugar mixture in water. The sugar would dissolve in water and the sand easily separated by filtration.
Third step - Sugar and Sugar water
Boil the sugar water to remove the water and place in the refrigerator for crystallization of the sugar.
5. If all the particles in a material are made up of
several smaller particles, and every larger particle
is identical, is the material a pure substance or
not? Explain your reasoning.
Answer:
No. Because a pure substance, no matter if an element, compound, it can only contain one kind of particle .
Explanation:
Which of the following is a nonelectrolyte?
HCI
Rb2SO4
CH3CH2OH
KOH
NaCl
Magnesium bromide is prepared in a laboratory using the reaction below. Typically, the magnesium bromide is recoveted as a solid by heating way the remaining water
Mg(s) + 2 HB-(aq) - MgBrac) + H200)
If 0.940 mole of HBr in solution is added to 16.5 grams of Mgo in a beaker and then is heated until dry, what are the expected contents of the beaker?
Calculate the mass (in g) of solute needed to prepare a solution with the given concentration and volume.
Sea water has a concentration of approximately 0.60 M sodium chloride. How much
sodium chloride is dissolved in 1.00 L of solution?
Coke has a concentration of 0.342 M. What mass of sugar (in g) is dissolved in a 2-L
bottle of coke?
What volume of concentrated nitric acid (15.8 M) is needed to prepare 4.0 L of a 2.0 M solution?
What volume of 9.0 M copper (II) sulfate stock solution is needed to prepare 3.0 L of a 5.0 M
solution?
Answer:
1. 35g NaCl.
2. 234g sugar.
3. 0.506L of concentrated nitric acid are needed.
4. 1.67L of 9.0M copper (II) sulfate are needed
Explanation:
Molarity is defined as the ratio between moles of solute and the volume of the solution.
1. 1.00L * (0.60mol / L) = 0.60 moles NaCl are dissolved
To convert moles to mass we must use its molar mass:
0.60mol NaCl * (58.44g/mol) =
35g NaCl
2. 2L * (0.342mol / L) = 0.684 moles Sugar = moles sucrose
0.684 mol * (342.30g / mol) = 234g sugar
3. 4L of a 2.0M are:
4L * (2.0mol/L) = 8moles
8mol * (1L / 15.8mol) = 0.506L of concentrated nitric acid are needed
4. 3.0L * (5.0 mol / L) = 15.0 moles copper (II) sulfate.
15.0mol * (1L / 9.0mol) = 1.67L of 9.0M copper (II) sulfate are needed
Identify the products in the reaction HCI + NaOH → NaCl + H20.
A. HCI, NaOH, NaCl, and H2O
B. HCl and NaOH
C. NaCl and H20
D. NaOH and H20
The products in the reaction HCI + NaOH → NaCl + H20, are C. NaCl and H20.
How are these the products ?The reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) is a neutralization reaction, which means that it produces a salt and water. In this case, the salt is sodium chloride (NaCl) and the water is H2O.
The other options are not correct because they do not include all of the products of the reaction. Option (A) includes HCl and NaOH, but it does not include H2O. Option (B) only includes HCl and NaOH. Option (D) only includes NaOH and H2O.
In conclusion, option C is correct.
Find out more on products at https://brainly.com/question/20322602
#SPJ6
What is a reactant?
A- Solid particles that have been separated from a solution
B- A substance that has the ability to be dissolved by a solvent
C- A mixture in which a solid and a liquid or two liquids are mixed occurs
D- The substance present before a chemical reaction occurs
Answer:
it is D
Explanation:
because it is a substance that participants in a chemical reaction.
Wine goes bad soon after opening because the ethanol ch3ch2oh in it reacts with oxygen gas o2 from the air to form water h2o and acetic acid ch3cooh , the main ingredient of vinegar. Calculate the moles of ethanol needed to produce 0.055mol of acetic acid. Be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
Answer:
For producing 0.55 mole of acetic acid, 0.55 mole of ethanol is required.
Explanation:
The balanced equation for this reaction is
CH3CH2OH + O2 --> CH3COOH + H2O
As we can see in this equation, the ration of number of moles of acetic acid to the number of moles of ethanal is equal to [tex]1 : 1[/tex]
Hence, in order to produce one mole of acetic acid, 1 mole of ethanol is required.
Thus, for producing 0.55 mole of acetic acid, 0.55 mole of ethanol is required.
element A it's valance number is 3 and element B it's valance number is 6 make it compound
Answer:
A2B
Explanation:
A = 3
B = 6
exchange valencies
A6B3
A2B
Why does Play-Doh taste salty?
Pls my science teacher wants an answer so pls answer ASAP i need an explaination
Answer:
It's made of salt
Explanation:
The recipe has salt as an ingredient
Answer:
playdoh is literally made of salt. thats why it tastes salty
Explanation:
"Show a general equation for polymerisation"
Answer:
Polymerisation is the chemical process of monomers joining together to form polymers, often it takes many thousands of monomers to make a single polymer.
Explanation:
with 24.1 moles of P4O10 how many moles of H3PO4 could be made
how many moles are in 6.31x10^24 C atoms
Answer:
Explanation:
1 mol of any chemical is 6.02 * 10^23
x mol of any chemical is 6.31 * 10^24
You should look at this before you put it in your calculator. You should think roughly 10.
Now you can set it up as a proportion
1/x = 6.02 * 10^23/6.31 * 10^24 Cross multiply
6.02 * 10^23 x = 1 * 6.31 * 10^24 Divide by 6.02 * 10^23
x = 6.31 * 10^24 / 6.02 * 10^23
x = 10.48 mols.
answers this...i gave brainlest!!
Answer:
I hope I can help
Explanation:
I hope I can help you