convert 3.63 days into seconds

When working in the fume hood, it is important to make an effort to minimize choose clutter only keep items in the hood if they are being used for choose the current experiment do not choose store chemicals in the fume hood unless instructed to do so.

When you are not working in the hood, keep the sash closed. Maintain a safe distance between your face and the fume hood. Unless you're utilizing a walk-in fume hood, the only part of your body within the hood should be your hands. The sash serves as a barrier and provides protection while performing dangerous work.

Use at least 6 inches of space inside the fume hood behind the sash plane. As stated by industry standards such as ANSI/AIHA Z9, this is vital for safety as a good working practice. This means that no equipment in the fume hood should come into contact with the front airfoil of the work surface.

For more information on fume hood kindly visit to

https://brainly.com/question/29582094

#SPJ4

All of the following are postulates of the kinetic molecular theory of gases except option D. (at a constant temperature, each molecule has the same kinetic energy).

It is not a postulate of the kinetic theory of gases because the theory states that at a constant temperature, all molecules have the same average kinetic energy as it varies for different molecules due to the fact that they have different velocities.

A qualitative and quantitative description of the characteristics of an ideal gas can be found in something called the kinetic molecular theory. It defines how the molecules move and how they interact with each other while treating the molecules that make up the gas as if they were point masses. In addition to this, it clarifies the connection that exists between the velocities, pressure, and kinetic energy of the molecules.

Want to know more about kinetic molecular theory visit the link which is given below;

https://brainly.com/question/15013597

#SPJ4

Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.

might result in changed substrate identification and catalytic efficiency, allowing manipulation of the hydrogen bonding network and the methylation process. Noncanonical amino acid mutagenesis can be utilized to investigate the significance of unusual CH-based hydrogen bonding in methyltransferase activity, perhaps leading to the identification of novel therapeutic targets.Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.Noncanonical amino acid mutagenesis can be used to manipulate atypical CH-based hydrogen bonding in a methyltransferase. This procedure includes inserting non-natural amino acids.

learn more about amino acid   here:

https://brainly.com/question/28409615

#SPJ4

Between 80 to 88%, which is equivalent to that of typical plant meals but somewhat less than that of animal proteins

To learn more about  nutrients refer to:

https://brainly.com/question/9348916

#SPJ1

Electrons are shared unequally between two atoms in polar covalent bond.

to learn more about covalent bond from the given link:

https://brainly.com/question/10777799

#SPJ1

Answer:

mmHg is cooled to give a pressure of 580. mmHg. Express your answer to two significant figures and include the appropriate units. Å o D Explanation:

The right response is a. NaCl will have a lower boiling point than NaF because the coulombic attractions are weaker in NaCl than in NaF

The strength of the intermolecular interactions between a compound's particles determines its boiling point. The intermolecular interactions in an ionic compound like NaCl are electrostatic forces of attraction between the positive cations and the negative anions. The particles in an ionic compound are called ions. The charge of the ions and their separation from one another define the strength of these forces.

The cations in NaCl are Na+, while the anions are Cl-. Na+ has a radius of 76 pm, while Cl- has a radius of 181 pm. The distance between the ions in NaCl is higher than that in NaF, which has smaller ions, since the radius of Cl- is greater than that of Na+. As a result, in comparison to NaF, the electrostatic forces of attraction between the ions in NaCl are weaker. This indicates that the boiling point of NaCl is lower than that of NaF because less energy is needed to separate the ions in NaCl.

To learn more about boiling point:

https://brainly.com/question/29233996

#SPJ4

The compounds that are the same among the given options are as follows: compound 1 and 2 (option C).

A chemical compound is a substance formed by the union of two or more chemical elements in a fixed ratio, the union being a chemical bond.

A chemical compound is made up of elements with given proportions. According to this question, a compound made up of hydrogen and oxygen with different proportions.

Based on the given proportions of hydrogen and oxygen in the above compounds, compound 1 and 2 are similar because they have an equal ratio of 8.09 i.e.

Learn more about compound at: https://brainly.com/question/12166462

#SPJ1

Ammonium sulfide nh4s is the name-formula pair that is incorrectly matched.

The formula is a fact or a rule that is expressed using mathematical symbols. Normally, three or more values are connected by an equal sign. When you know the value of one quantity, you may apply the formula to determine how much the other quantity is worth.

Following that, demand fell as households decided not to make purchases and instead made do about what they already had. When a result, formula producers would have to produce less as the market changed. Delays: Supply chain bottlenecks brought on by the epidemic continue to affect the production of baby formula. With the maker Abbott, delays brought on by the weather have also happened.

To know more about formula visit:

https://brainly.com/question/29886204

#SPJ4

(a) Chromium in the compound Cr(H2O)62 has 6d electrons.

(b) Manganese in the compound [Mn(CN)6]^2- has 5d electrons.

(c) Ruthenium in the compound [Ru(NO)(en)2Cl]Br has 8 d electrons.

(d) Ruthenium in the compound [Ru(NH3)5Cl]SO4 has 8 d electrons.

(e) Osmium in the compound Na2[Os(CN)6] has 8 d electrons.

(f) Cobalt in the compound [Co(NH3)4CO3I] has 9 d electrons.

Chromium in the compound Cr(H2O)62 has 6d electrons. Chromium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Cr in the +3 state is [Ar] 3d3. This means that the 3d sub-shell of the Chromium atom is occupied by 3 electrons, and the remaining 3 electrons are present in the 4s sub-shell.

Manganese in the compound [Mn(CN)6]^2- has 5d electrons. Manganese is a transition metal, and it is in the +2 oxidation state in this compound. The electronic configuration of Mn in the +2 state is [Ar] 3d5. This means that the 3d sub-shell of the Manganese atom is occupied by 5 electrons, and the remaining 2 electrons are present in the 4s sub-shell.

Ruthenium in the compound [Ru(NO)(en)2Cl]Br has 8d electrons. Ruthenium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Ru in the +3 state is [Kr] 4d8. This means that the 4d sub-shell of the Ruthenium atom is occupied by 8 electrons.

Ruthenium in the compound [Ru(NH3)5Cl]SO4 has 8 d electrons. Ruthenium is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Ru in the +3 state is [Kr] 4d8. This means that the 4d sub-shell of the Ruthenium atom is occupied by 8 electrons.

Osmium in the compound Na2[Os(CN)6] has 8 d electrons. Osmium is a transition metal, and it is in the +4 oxidation state in this compound. The electronic configuration of Os in the +4 state is [Xe] 4f14 5d8. This means that the 5d sub-shell of the Osmium atom is occupied by 8 electrons.

Cobalt in the compound [Co(NH3)4CO3I] has 9 d electrons. Cobalt is a transition metal, and it is in the +3 oxidation state in this compound. The electronic configuration of Co in the +3 state is [Ar] 3d7 4s2. This means that the 3d sub-shell of the Cobalt atom is occupied by 7 electrons, and the remaining 2 electrons are present in the 4s sub-shell.

Learn more about transition metals here:

https://brainly.com/question/1618364

#SPJ4

(B)Y−(aq). based on the information given above,   the following is the strongest acid The Y- (aq) symbol represents aqueous Yions. In aqueous solutions, Yions are hydrated ions.

meaning they are surrounded by water molecules. Aqueous solutions are solutions in which water is the solvent, and the solute is a compound that is dissolved in the water. In the case of Y-, the solute is Y ions. Y can be a variety of elements, including but not limited to metals, non-metals, and metalloids. The properties of Y- (aq) will depend on the identity of Y, as well as the concentration of the ions in the solution. For example, highly concentrated solutions of Y- (aq) can be acidic, while dilute solutions may be neutral. Aqueous solutions of Y- (aq) play a crucial role in many natural and industrial processes, such as biochemical reactions, electrochemical processes, and in the production of fertilizers and batteries.

learn more about  water here:

https://brainly.com/question/28465561

#SPJ4

Considering the definition of atomic mass, isotopes and atomic mass of an element, the average atomic mass of magnesium is 24.31 amu.

The number of protons and neutrons determine the mass number of an element.

An isotope is an atom that belongs to the same chemical element as another. Isotopes have the same number of protons, but different numbers of neutrons.

The atomic mass of an element is the weighted average mass of its natural isotopes.

In other words, the atomic masses of chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element, taking into account the relative abundance of each of them.

In this case, you know:

The average atomic mass of magnesium is calculated as:

Average atomic mass= 23.99 amu×0.787 + 24.99 amu×0.1013 + 25.98 amu×0.1117

Average atomic mass= 24.31 amu

Finally, the average atomic mass is 24.31 amu.

Learn more about average atomic mass:

brainly.com/question/4923781

brainly.com/question/1826476

brainly.com/question/15230683

brainly.com/question/7955048

#SPJ1

The engineers do next to find out if the sole of the shoe can be redesigned. Therefore, option B is correct.

The trial experiment is defined as the application of the research product to a specific population before it is introduced to the market.

The effect of the research to the greater percentage of the subject made the product to the market.

The engineering shoe product was only effective for a small percentage of the population, making it less effective. It has been discovered that the knee problem is related to the shoe sole.

Thus, option B is correct.

To learn more about the trial experiment, follow the link;

https://brainly.com/question/2029264

#SPJ1

Your question is incomplete, most probably your question was

A group of engineers has just conducted an experimental trial on a shoe

designed to help people suffering from a painful foot disorder. During the trial,

the shoe proved effective for only 5% of the test subjects. What should the

engineers do next?

A. Use a cheaper material to make the shoe more profitable.

O

B. Find out if the sole of the shoe can be redesigned

O

C. Begin to market this new shoe to patients and doctors.

D. Conduct the test again.

The molar mass of the polyetheylene molecule is  4200 g/mol.

We know that a polymer is said to be formed by the combination of so many units that are joined together. The single units that we have to join together so as to form the polymer is what we call the monomers.

Now we are told that the number of repeated monomer units, for polyethylene is 150.

Molar mass of the ethylene = 2(12) + 4(1) = 28 g/mol

Molar mass of the polyethylene = 150 * 28 g/mol = 4200 g/mol

Learn more about etheylene:https://brainly.com/question/28303854

#SPJ1

Answer:

The mass of the lead in the cylinder would be 24.4 kg. To calculate this, you need to first calculate the volume of the cylinder, using V=pi r2 h. With a diameter of 5 cm, the radius is 2.5 cm, and the height is 172.4 cm. Thus, the volume of the cylinder is 435.3 cm3. Then, to find the mass, you need to multiply the volume by the density of lead, which is 7.37 g/cm3 at 25° C. This gives you a mass of 24.4 kg.

Answer:

  A)  5.0 atm

Explanation:

You want to know the pressure in a 1 L flask at 300 K when 0.03 mol of C₃H₈ reacts completely with O₂.

We suppose the reaction of interest is ...

  C₃H₈(g) +5O₂(g) ⇒ 3CO₂(g) +4H₂O(g)

This shows us there are 3+4 = 7 moles of products for each mole of C₃H₈ in the reaction. That is, there will be 0.03 mole × 7 = 0.21 mole of products.

The gas law equation tells us the final pressure can be computed by ...

  PV = nRT

  P = nRT/V = (0.21 mol)(0.082 L·atm/(mol·K)(300 K)/(1 L) ≈ 5.166 atm

The total pressure in the flask after the reaction is closest to ...

  A) 5.0 atm

The exothermic dissolution of mg(oh)2(s)will increase the solubility of mg(oh)2 in an aqueous solution increasing the pH.

The solubility of a substance in water is affected by its solubility product constant (Ksp) and the pH of the solution. Ksp is a measure of the maximum concentration of a substance that can be dissolved in water at a given temperature and pressure. In this case, the Ksp of Mg(OH)2 is 1.8 x 10-11.

Increasing the pH of the solution will increase the solubility of Mg(OH)2 because it will shift the equilibrium of the dissolution reaction in favor of the products. This is because the dissolution reaction is exothermic, meaning that heat is released when the Mg(OH)2 dissolves. This heat release causes the equilibrium to shift towards the product side.

On the other hand, decreasing the pH, adding NH3, or adding Mg(NO3)2 will not affect the solubility of Mg(OH)2 in the solution. Hence options a, c, and d are not correct.

Learn more about dissolution

brainly.com/question/2459213

#SPJ4

Simply multiplying the oxygen molar mass by two yields the molar mass of oxygen gas.

To learn more about oxygen atoms refer to:

https://brainly.com/question/28009615

#SPJ1

The temperature of the water in degrees Fahrenheit and kelvin are:

To convert the temperature of scalding water, 54 degrees Celsius, into degrees Fahrenheit, you can use the following formula:

F = (°C x 9/5) + 32

So:

(54 x 9/5) + 32 = 129.2 °F

To convert the temperature of scalding water, 54 degrees Celsius, into Kelvin, you can use the following formula:

°C + 273.15 = K

So,

54 + 273.15 = 327.15 K

Find out more on temperature at https://brainly.com/question/3994464

#SPJ1

Differential rate law describes the rate of reaction as a function of reactant concentrations, changing with time. Integrated rate law describes the change in reactant concentration over time and is often used to find the half-life of a reaction.

The term "rate law" is commonly used to refer to the integrated rate law. K in a rate law is the rate constant, a value specific to each reaction that determines the rate of reaction. Orders in a rate law describe the dependency of the reaction rate on the concentration of each reactant, with each reactant having its own order. The overall reaction order is the sum of the individual orders, which can be determined through experiments.

Learn more about rate law here: brainly.com/question/7694417

#SPJ4

The equipment needed to measure moles in chemistry would be the weighing balance.

In chemistry, the mole of a substance is the ratio of the mass of the substance and its molar mass. It is otherwise known as the number of moles in substances and can be mathematically expressed as:

Mole = mass/molar mass

Thus, in order to find the number of moles present in a substance, the mass of the substance must be known and the molar mass is calculated appropriately.

Since the molar mass of substances is determined from the sum of molar masses of atoms of elements present in the chemical formula of the substance, the molar mass is theoretical.

However, to find the mass of the substance, it has to be weighed using a suitable measuring scale, usually in the form of a weighing balance.

More on moles of substances can be found here: https://brainly.com/question/14200405

#SPJ1

Concentration of A to decrease to 1/e (37%) of its initial value is approximately 2.1 seconds. The rate of a second-order reaction is given by the equation: rate = k[A]^2 .

Where k is the rate constant and [A] is the concentration of the reactant. Given that the rate constant is k = and the initial concentration of A is [A]0 = , we can use the above equation to determine the rate of the reaction.

rate = k[A]^2 = ()( )^2

To find out how long it takes for the concentration of A to decrease to 1/e (37%) of its initial value, we can use the following equation:

[A] = [A]0e^(-kt) ,

Where t is the time in seconds.

Given that we want the final concentration of A to be

1/e (37%) of the initial concentration,

we can set up the following equation:

( ) = ( )e^(-kt) ; and solve for

t: t = -(1/k)ln(1/e)

t = -(1/( ))(ln(1/e))

t = -(1/( ))(ln(0.37))N

t = (1/( ))ln(2.70)

t ≈ 2.1 sec

So the time it takes for the concentration of A to decrease to 1/e (37%) of its initial value is approximately 2.1 seconds.

Learn more about rate constant here :

https://brainly.com/question/20305871

#SPJ4

2-penten-1-ol is a primary allylic alcohol that is 2-pentene in which a hydrogen at position 1 has been replaced by a hydroxy group.

Define penten -1?

To learn more about penten refers to:

https://brainly.com/question/20068688

#SPJ4

agriculture. The largest source of pollution to the Bay comes from agricultural runoff, which contributes roughly 40 percent of the nitrogen and 50 percent of the phosphorus entering the Chesapeake Bay.

Airborne nitrogen is one of the most significant polluters of the Chesapeake Bay and its tributaries. Excess nitrogen may drive the growth of algae blooms, preventing sunlight from reaching underwater grasses and creating low-oxygen "dead zones" that smother marine life. Nitrogen and phosphorus occur naturally in aquatic habitats, but human activities such as fertilizer usage, wastewater management, fossil fuel combustion, and soap and detergent discharge inject excess nutrient pollution into ecosystems quicker than ecosystems can respond. 1At Home and Around the Neighborhood: Fertilizers, yard and pet waste, and some soaps and detergents contain nitrogen and phosphorus and, if not utilized or disposed of appropriately, can contribute to nutrient contamination.

learn more about Chesapeake Bay  here:

https://brainly.com/question/14295402

#SPJ4

Option b is the proper answer. (ch3) In each pair of reactants below, 3n is one of the reactants, and (ch3)3n is the more nucleophilic of the two. In chemistry, a nucleophile is a chemical entity that forms bonds.

letting go of two electrons. All ions and molecules containing at least one pi bond or a free pair of electrons are considered nucleophiles. Because they give up electrons, Lewis bases are nucleophiles. When two or more atoms, molecules, or ions form a chemical connection, also known as chemical bonding, the result is a chemical compound. These chemical bonds are responsible for holding the atoms of the resultant molecule together. A chemical link is an attraction between atoms. This attraction could be attributed to a variety of different behaviours.

Learn more about nucleophile here

https://brainly.com/question/28325919

#SPJ4

Option (D) is the appropriate response. Three rings make up an atom's diagram, and they are labelled A, B, and C from outside to inside.

Each of the two electrons in A and B. There are 4 protons and 5 neutrons inside ring C. In the atomic model shown below, C is where the strong nuclear force manifests itself.

According to the atomic hypothesis, atoms make up the building blocks of matter. The scientific theory is that of atoms.

As a result of the foregoing conclusion, we can state that a diagram of an atom contains three rings, each of which is designated A, B, and C from outside to inside. Each of the two electrons in A and B. There are 4 protons and 5 neutrons inside ring C.

In the atomic model shown below, C is where the strong nuclear force manifests itself.

Option (D) is the appropriate response, thus.

To learn more about Atomic theory from given link

https://brainly.com/question/16360147

#SPJ1

The balanced equation for the important atmospheric reaction depicted below is:

C + O2 -> CO2

This reaction represents the combustion of carbon (C) with oxygen (O2) to form carbon dioxide (CO2). In this reaction, one molecule of carbon combines with one molecule of oxygen to form one molecule of carbon dioxide. This reaction is important in the atmosphere because it is one of the main ways that carbon is removed from the atmosphere and stored in the form of carbon dioxide. This reaction also plays a key role in the global carbon cycle and is a major contributor to climate change.

To learn more about atmospheric reaction:

https://brainly.com/question/23287233

#SPJ4

The trend in the molar solubility of in different concentrations seen in the graph above appears to be best explained by the statement (a) "increasing concentrations of allow less to dissolve before the solution

The amount of a material present in a mixture or solution is referred to as its concentration. Different units, such as molarity (moles of solute per litre of solution), molality (moles of solute per kilogramme of solvent), or mass percentage, can be used to quantify them (mass of solute as a percentage of total mass). Concentrations play a key role in chemistry for predicting reaction behaviour and figuring out how much of a material to add to a solution. Concentrations are crucial in figuring out how various chemicals affect living things and the environment in sectors like environmental science and medicine.

Learn more about concentrations here:

https://brainly.com/question/10725862

#SPJ4

The exact values and conversion factors are kcal > 103 cal/ 1 kcal > cal > 4.184 J/ 1 cal > J for each step.

A ratio written as a proportion that equals one is referred to as a conversion factor. In order to have identical measurements represented in new units when we apply calculations to transform units, we multiplied our previous measurement by both the conversion factor.

Showing someone the precise amount you have will be helpful. help with a mathematical equation, especially one involving chemistry where the solution can be found by following the units. Indicate the person's preferred system of measurement. Molarity is the unit of quantifiable concentration measurement that chemists utilize the most.

To know more about conversion factors visit:

https://brainly.com/question/28366871

#SPJ4

The correct reading of the temperature as shown in the pictured thermometer is 36°C.

A thermometer is basically a device which is used to measure the temperature. In a mercury thermometer, the thermometer is filled up with mercury. Mercury is a metal which is present in liquid state at room temperature. Mercury an expand and contract with the change in temperature.

When the temperature increases, the mercury in the thermometer expands and rises which we can see in the thermometer and take the reading of the temperature against the scale. In the given temperature, we can observe the reading is at the mark just after the 35°C mark on the scale and hence the temperature reading must be 36°C.

To know more about thermometer here

https://brainly.com/question/28027822

#SPJ4