Answer:
86.85°C
Explanation:
K = °C + 273.15
360K − 273.15 = 86.85°C ≈ 87°C
what would cause the different liquids to have different density
Answer:
The same amount of two different liquids you used in the container will have different densities because they have different masses. The liquids that weigh more (a higher density) will sink below the liquids that weigh less (a lower density).
Material: Density (g/cm3)
Light Corn Syrup: 1.33
Vegetable Oil: 0.92
Explanation:
Science
In the number 48.93, which digit is estimated?
In the number 48.93, the digit that is estimated is the digit "9."
In the number 48.93, the digit "9" is estimated because it falls after the decimal point. When a decimal number, the digits to the right of the decimal point represent fractional or decimal values.
These digits can be estimated or rounded to a certain degree of accuracy, depending on the context or the desired level of precision.
The digit "9" is the last digit after the decimal point, it is likely an estimated value. It means that the actual value could be slightly higher or lower than 9, depending on the level of precision required.
To learn more about the digit, follow the link:
https://brainly.com/question/30142622
#SPJ6
In completing a Fischer Esterification experiment using acetic acid and unknown alcohol catalyzed by sulfuric acid a student starts with excess acetic acid with the intention of shifting the equilibrium towards formation of product. Identify the law used to predict this effect.
Answer:
The equilibrium law
Explanation:
According to the equilibrium law , when [tex]$\text{concentration}$[/tex] of any of the reactants or the products in the reaction at an equilibrium state, is changed, then it changes the composition of equilibrium mixture in order to minimize the effect of
Acetic acid (in excess) + [tex]$\text{alcohol}$[/tex] ⇄ [tex]$\text{ester}$[/tex] + water
[tex]$\text{Fischer esterification}$[/tex] is a reaction which involves the equilibrium. So to force the reaction towards the side of [tex]$\text{ester}$[/tex], one of the reactant is taken in excess. All this can be explained easily by applying the equilibrium law.
an example of binary compound is
Answer:
Explanation:
An example of binary compund is ZnI2 is zinc iodide
Answer:
https://sciencenotes.org/what-is-a-binary-compound-definition-and-examples/
Explanation:
https://sciencenotes.org/what-is-a-binary-compound-definition-and-examples/
What is indicated by the prop- prefix?
Answer:
The molecule has 3 carbon atoms.
Explanation:
Pcl3+H2O=H3PO3+Hcl=?
Answer:
PCl3 + 3H2O → HPO(OH)2 + 3HCl. Phosphorus(III) chloride react with water to produce phosphorous acid and hydrogen chloride.
Explanation:
Answer:
the answer is stop studying,enjoy your life,party all night,bite like a dog and purr like a cat thats it
Explanation:
i dunno
How many structural isomers does C5H12 have?
a. two
b. three
c. one
d. five
Answer:
three structural isomers
Pentane (C5H12) is an organic compound with five carbon atoms. Pentane has three structural isomers that are n-pentane, Iso-pentane (methyl butane) and neopentane (dimethylpropane).
PLS HELP! WILL GIVE BRAINLIST!
Assume there are 1000 units of energy in the producer level of the energy pyramid. How many units of energy are available at each of the three consumer levels? Show your calculations. Hint first, change the percentages to decimals.
Answer:
Energy retained at consumer level 1 - units
Energy retained at consumer level 2 - units
Energy retained at consumer level 3 - units
Explanation:
Substances that are physical combinations of two or more different types of matter are known as
Answer:
A mixture!
Explanation:
Mixtures are a substance made of combining two or more different kinds of matter :)
Hope this helped!
draw the structure of ethoxyethane
Answer:
i couldnt draw it but here is a picture
Explanation:
How could renewable energy sources be used to heat and cool a house?
Please help me. Question is post on photo.
Answer:
London Dispersion Only
Explanation:
BF3 is non polar and nonpolar molecules only have london disperion forces
Which of the following is a true statement regarding living organisms? All living things- (A. Require oxygen to breath)
(B. Are capable of intelligent thought)
(C.are made up of one or more cells)
(D.have a lifespan of at least on weak?
Answer:
A or C
Explanation:
Answer:
are made up of one or more cells
Explanation:
A cell is the building block of life of any organism. Therefore, an organism simply cannot exist if it has no cells
Consider this reaction: HCO3− + H2S → H2CO3 + HS− Which is the Bronsted-Lowry base? H2S HCO3- HS– H2CO3
Answer:
hco3
Explanation: bc i said so
NaOH dissociation equation
Answer:
This can be represented by the chemical equation: NaOH H2O→ OH- + Na.
Hydrocarbons in which carbon atoms are connected by only single bonds in straight chains or branched chains are called
a. alkanes.
b. alkynes.
c. alkenes.
d. aromatic hydrocarbons.
Answer:
Hydrocarbons in which carbon atoms are connected by only single bonds in straight chains or branched chains are called
a. alkanes.
Two ways that salinity can increase
What is a magnet?(2 points)
O A tool used to help determine if certain materials are magnetic
O A tool used to help determine if certain materials have a large mass
O A tool used to help determine if materials are the color blue
O A tool used to help determine if materials use the force of gravity
A gas occupies 40.0 mL at 150 K. What volume does it occupy at 300 K,
assuming pressure is constant? *
Answer:
.08 L or 80 ml
Explanation:
Use the equation V/t = V/t.
.04L / 150K = V / 300K
.04 / 150 * 300 = V
.08 L or 80 ml
why does glucose more soluble in water comparing to benzoic acid?
Answer:
Because it desolves in water very well
Help please!!!!!!!!!!!!
Answering so you can give the other person brainliest!
Would a burning candle have potential or kinetic energy?
Answer:
When the candle is lit and burning, it has kinetic energy.
Explanation:
please smash brainliest on my doorstep
example of cyclization
Answer:
yes
Explanation:
yes
What is the pH of a .00034 M of HCl solution?
3.5
5.3
3.0
5.0
Answer:
pH = 3.5
Explanation:
HCl is a strong acid, so we can use this little formula to find the pH of the solution:
pH = -log[H3O+]
(where H3O+ is the strong acid, HCl)
So we just plug in the molarity for the concentration of the acid...
pH = -log(0.00034)
Solve.
pH = 3.468521083
And apply sig. figs....
pH = 3.5
K + Br2 → KBr
Identify a covalently bonded molecule in the reaction above that is a
REACTANT.
Answer: A covalently bonded molecule in the reaction
[tex]K + Br_{2} \rightarrow KBr[/tex] is [tex]Br_{2}[/tex].
Explanation:
A bond formed by sharing of electrons between two or atoms is called a covalent bond.
For example, bromine is a group 17 element and it has 7 valence electrons. It needs one more electron to complete its octet.
So, when one bromine atom chemically combines with another bromine atom then sharing of electrons takes place which leads to the formation of [tex]Br_{2}[/tex] molecule.
Hence, in the equation [tex]K + Br_{2} \rightarrow KBr[/tex]; [tex]Br_{2}[/tex] reactant is a covalently bonded molecule. A covlent bond is formed by two or more non-metal atoms that chemically combine together.
In a chemical equation, reactants are written on the left side and products are written on right side.
Thus, we can conclude that a covalently bonded molecule in the reaction
[tex]K + Br_{2} \rightarrow KBr[/tex] is [tex]Br_{2}[/tex].
how much 0.100 m h2so4 are needed to make 25.0 ml of 0.00500 m solution
Answer:
3) 1.25
Explanation:
I had the same question and somehow got it right :)
The new volume will be determined by molarity and which will be 1.25 ml.
What is volume?The volume of an object is just a measurement of how much space it takes up.
What is Molarity?
The molality refers to the moles of a solute in relation to the mass of the solvent, whereas the molarity refers to the moles of a solute in based on the volume of the solution. It can be denoted by M.
The formula of Molarity is
[tex]M_{1} V_{1} =M_{2}V_{2}[/tex]
where, M is molarity and V is volume.
Calculation of volume.
It is given that,[tex]M_{1} = 0.1 M, M_{2} =0.0025 M.[/tex]
Now, puts the value of given data in molarity equation.
[tex]M_{1} V_{1} = M_{2} V_{2}[/tex]
[tex]V_{1} = M_{2} V_{2} /M_{1}[/tex]
[tex]V_{1}[/tex] = 0.005×25/0.1 = 1.25 ml
Therefore, the correct answer will be option 3.
To know more about molarity and volume click here.
https://brainly.com/question/20366625.
#SPJ2
Which of the following is common to both nuclear fusion and nuclear fission? PLZ I NEED ANSWER quickly
1.The fuel must be in the plasma state
2.A chain reaction is needed to start the reaction
3.Matter is converted into energy
4.Temperatures over one million degrees Celsius are needed for the reaction to occur
Answer:
I think number4.Nuclear fusion reaction is not possible in earth
Nuclear fusion and nuclear fission both have common to temperatures over one million degrees Celsius are needed for the reaction to occur. Therefore, option 4 is correct.
What is nuclear fusion ?A reaction known as nuclear fusion occurs when two or more atomic nuclei fuse to create new atomic and subatomic particles. Energy is released or absorbed depending on how much mass there is between the reactants and products.
Nuclear reactions that involve fusion and fission both yield enormous quantities of energy that can be used to generate power.
The two heavy isotopes of hydrogen, deuterium and tritium, are the primary fuels used in nuclear fusion. Only 0.0153% of natural hydrogen is deuterium, which may be easily and cheaply produced from seawater. Lithium, which is also widely distributed in nature, can be used to create tritium.
Thus, option 4 is correct.
To learn more about nuclear fusion, follow the link;
https://brainly.com/question/12701636
#SPJ2
Which binary molecular compound includes an element with five atoms of one element?
Answer:
For example, N2O4 is referred to as dinitrogen tetroxide, not dinitrogen tetraoxide, and CO is called carbon monoxide, not carbon monooxide.
...
Binary molecular (covalent) compounds.
Prefixes used in chemical nomenclature
prefix number of atoms
tetra- 4
penta- 5
hexa- 6
Explanation:
Aluminum chloride, AlCl3, is an inexpensive reagent used in many industrial processes. It is made by treating scrap aluminum with chlorine according to the following equation. Please balance the equation.
__2_ Al (s) + 3___ Cl2(g) _2___ AlCl3(s)
If you start with 3.11 g of Al and 5.32 g of Cl2, which reagent is limiting? How many grams of AlCl3 can be produced? During an experiment you obtained 5.57 g of AlCl3, what was your percent yield?
Answer:
Cl₂ the limiting reactant.
6.67g of AlCl₃ can be produced.
83.5% is percent yield
Explanation:
Based on the reaction:
2 Al + 3Cl₂ → 2AlCl₃
2 moles of aluminium react with 3 moles of chlorine.
To solve this question we must find the moles of each reactant in order to find limiting reactant. With limiting reactant we can find theoretical yield. Percent yield is:
Actual yield (5.57g) / Theoretical yield * 100
That means if we find theoretical yield we can find percent yield:
Moles Aluminium: 26.98g/mol
3.11g * (1mol / 26.98g) = 0.115 moles Al
Moles Chlorine: 70.90g/mol
5.32g * (1mol / 70.90g) = 0.075 moles Cl₂
For a complete reaction of 0.075 moles of Cl₂ are required:
0.075 moles Cl₂ * (2mol Al / 3mol Cl₂) = 0.050 moles of Al
As there are 0.115 moles of Al, Aluminium is the excess reactant and Cl₂ the limiting reactant.
Moles AlCl₃ and mass: 133.34g/mol
0.075 moles Cl₂ * (2mol AlCl₃ / 3mol Cl₂) = 0.050 moles of AlCl₃
0.050 moles of AlCl₃ * (133.34g / mol) =
6.67g of AlCl₃ can be producedPercent yield:
5.57g / 6.67g * 100 =
83.5% is percent yieldThe major products obtained from the following sequence of reactions are:
(CH 3) 2 CHCH 2 N(CH 2 CH 3 ) 2 →CH 3 I H 2 O→ Ag 2 O →heat products.
Answer:
The answer is "Option C".
Explanation:
Please find the complete question and its solution in the attached file.
using Hoffman's elimination reaction.