Answer:
I would say:
C. It shifts right and [CH3COO-] increases.
Explanation:
I am uncertain, but since NaOH is basic I think it should shift right.
hope this helps though
Which car has the highest kinetic energy if each car is traveling at a speed of 1 m/s? Explain how you arrived at your answer.
Car a is going 2 KG
Car B 4KG
Car c 6KG
Car D 8KG
Car D
Because it is the heaviest. Kinetic energy is directly proportional to the velocity and mass of the object. All the cars have the same velocity. But Car D has the most mass. So, it has most kinetic energy, because more the mass more the energy.
Methane, a highly flammable gas, is placed in a piston that has a volume of 2.1
L at STP. The piston then compresses the gas to 125 mL. What is the pressure
inside of the piston?
What is the number of moles in a sample of gas that has a volume of 3.5 L, a
pressure of 200 kPa, and a temperature of 300 K?
Explanation:
[tex]PV = nRT \\ (200000 \times 3.5 \times {10}^{ - 6} ) = n \times 8.314 \times 300 \\ n = \frac{0.07}{2494.2 } \\ n = 2.81 \times {10}^{ - 5} [/tex]
[tex] \small{ \star{ \underline{ \blue{ becker}}}}[/tex]
What percentage of a substance remains after 7 half-lives have passed?
A. 0.39
B. 2.5
C. 1.25
D. 0.78
Answer:
Not really sure, buts its either B or C.
Determine the percent composition of Lithium in Li3PO3 (lower case BOTH 3)
Your answer:
A. 20.866%
B. 31.037%
C. 48.097%
D. 10.080%
Answer:
A. 20.866%
Explanation:
First, we calculate molar mass of Li3PO3
Molar mass of Li3PO3 = 6.9 (3) + 31 + 16(3)
= 20.7 + 31 + 48
= 99.7g/mol
To calculate the percent composition of Lithium, we say:
Mass of lithium in compound/mass of compound × 100
% composition = 20.7/99.7 × 100
= 0.208 × 100
= 20.8%.
An arctic weather balloon is filled with 46.0L of helium gas inside a prep shed. The temperature inside the shed is 12°C The balloon is then taken outside, where the temperature is -10°C Calculate the new volume of the balloon.
You may assume the pressure on the balloon stays constant at exactly 1atm Be sure your answer has the correct number of significant digits.
please help
Answer:
42.45 L
Explanation:
Using the Charle's law equation as follows:
V1/T1 = V2/T2
Where;
T1 = initial temperature (K)
T2 = final temperature (K)
V1 = initial volume (L)
V2 = final volume (L)
Based on the information provided in this question;
V1 = 46.0 L
V2 = ?
T1 = 12°C = 12 + 273 = 285K
T2 = -10°C = -10 + 273 = 263K
Using V1/T1 = V2/T2
46/285 = V2/263
Cross multiply
285V2 = 46 × 263
285V2 = 12098
V2 = 12098 ÷ 285
V2 = 42.45L
The new volume of the balloon is 42.45 L.
Two reasons that a plant from a rain forest would not survive in a desert home?
Answer: A planet from a rain forest would not survive in a desert home, for the fact they depend on water and as these live from water, without it, this leads to dehydration and with loss of water with plants, nothing is able to survive when it comes to a rain forest plant being in a desert home. Another reason is the high trees and leaves that are providing the plants enough sunlight or shade to grow, it guarantees to help keep the temperature normal. Being in a deserted area would mean that there would be a temperature change, something the plant is not used to. Without that needed shade and avoiding the scorching sun, they will die out from how different the temperature is, and how hot it is.
Explanation: I hope this helped you.
okay, the answer should be simple and easy, plants from a rainforest would not survive in a desert because the plants in the rainforest do get water, sunlight and air whereas the plants in the desert have Sunlight which is very hot. so if a plant in the rainforest was transferred to the desert it will hard to survive and it will eventually die because they will not get water that will be needed and the plant can get sunburns with the too hot temperature.
What is the correct equilibrium constant expression for equation P2(g)
2 F20(g) = 2 PO(g) + 2 F2(g) ?
Answer:
k = [F2]² [PO]² / [P2] [F2O]²
Explanation:
In a chemical equilibrium, the equilibrium constant expression is written as the ratio between the molar concentration of the products over the molar concentration of the reactants. Each species powered to its reaction coefficient. For the equilibrium:
P2(g) + 2F2O(g) ⇄ 2PO(g) + 2F2(g)
The equilibrium constant, k, is:
k = [F2]² [PO]² / [P2] [F2O]²
Coca-Cola has 2.2 grams of carbon dioxide gas, CO2 in each 335ml can. What is the molarity of CO2 in Coca-Cola?
a. 0.14 M
b. 0.0066 mol/L
c. 0.028 mol/L
d. 0.41 mol/L
Answer:
a. 0.14 M
Explanation:
Molarity is the molar concentration of a solution and can be calculated using the formula below:
Molarity (mol/L) = number of moles (lol) ÷ volume (L)
To convert the mass of CO2 to moles, we use the formula: mole = mass/molar mass.
Molar mass of CO2 = 12 + 16(2)
= 12 + 32
= 44g/mol
mole = 2.2/44
mole = 0.05mol
Volume of can = 335mL = 335/1000 = 0.335L
Molarity = n/V
Molarity = 0.05/0.335
Molarity = 0.149
Molarity = 0.14 mol/L or M
What is the minimum amount of material that must be present in a living organism?
Answer:
Living things can have a minimum of one cell
Explanation:
Living things can have a minimum of one cell; these are called unicellular organisms. Some examples of unicellular organisms: bacteria, algae (plants), some fungi, and protozoa
hope this helps!
In an ecosystem ,cell is the minimum amount of material that must be present in a living organism.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/13979184
#SPJ2
Calculate how many grams of sodium chloride we would need to make a solution with the same molarity of seawater, which is about 0.598 M.
Answer:
34.92 grams NaCl (in 1 L of solution)
Explanation:
The chemical formula of sodium chloride is NaCl. From the formula, we can calculate the molar mass of NaCl:
MM(NaCl)= MM(Na) + MM(Cl) = 23 g/mol + 35.4 g/mol = 58.4 g/mol
A solution of NaCl with a molarity of 0.598 M has 0.598 moles of NaCl per liter of solution. So, we multiply the moles by the molar mass of NaCl to calculate the mass we need:
mass of NaCl = 0.598 mol x 58.4 g/mol = 34.92 g NaCl
Therefore, we need 34.92 grams of NaCl to prepare 1 liter of a solution with a molarity of 0.598 M.
The number of molecules of ammonia, NH₃, in water solution required for complete ionization of one molecule of sulfuric acid, H₂SO₄, is
1
2
3
4
6
Please Explain!!!
Answer:
6 that will be the answer
A cook is trying to identify a white powdery substance. The substance does not
dissolve in water, but it forms a solution in oil. Could the substance be table salt?
Why or why not?
it is not table salt
Explanation:
Table salt dissolves in water.
10) Which preparation produces a 2.0 M solution of Co
H1206? [molecular mass = 180.0]
(A) 180.0 g of C6H12O6 dissolved in 1000. mL of
solution
(B) 90.0 g of C6H1206 dissolved in 1000. mL of
solution
(C) 180.0 g of C6H1206 dissolved in 500.0 mL of
solution
(D) 90.0 g of C6H1206 dissolved in 500.0 mL of
solution
Answer:
(C) 180.0 g of C6H12O6 dissolved in 500.0 mL of solution
Explanation:
Molarity is mole/volume.
1. Find the mass of C6H12O6 in 1 Liter of 2.0 solution
(2 mol C6H12O6 / L) * (180 g / mol C6H12O6) = 360 g C6H12O6
There are 360 g C6H12O6 in 1000 mL of solution
2. Compare the value you found in step 1 to each of the multiple choice answers.
180.0 g of C6H12O6 dissolved in 500.0 mL of solution is exactly proportional to 360 g C6H12O6 in 1000 mL of solution.
The preparation which produces a 2.0 M solution of C₆H₁₂O₆ is 180.0 g of C₆H₁₂O₆ dissolved in 500.0 mL of solution.
How molarity is calculated?Molarity is defined as the number of moles of solute present in per liter of solution.
Moles of any substance will be calculated as :
n = W/M, where
W = given mass
M = molar mass
In the question given that molar mass of C₆H₁₂O₆ is 180 g/mole, and let we have produced the solution of 2 molarity by these amount in 1 liter i.e.
2 = n/1
n = 2 moles
Now by using these moles we can calculate the required mass of C₆H₁₂O₆ as:
2 = W/180
W = 360g
From this it is clear that for the preparation of 1 liter of solution of 2 molarity 360g of C₆H₁₂O₆ is required. So in 500mL of solution, 180 g of C₆H₁₂O₆ will use.
Hence, option (C) is correct i.e. 180.0 g of C₆H₁₂O₆ dissolved in 500.0 mL of solution.
To know kore about molarity, visit the below link:
https://brainly.com/question/16343005
Which of the following naming systems would you use to nameH2SO4?
Question 7 options:
a)
________________IC ACID
b)
HYDROGEN _________IDE
c)
________________OUS ACID
d)
HYDRO________IC ACID
Answer:
A
Explanation:
H2SO4 name is Sulfuric Acid. I hoped that helped !
3.A chair will move by itself because of its inertia.True or False.
Answer:
false
Explanation:
Inertia is the resistance of any physical object to any change in its velocity, so it can't move by itself. Only by a different entity.
Answer: False
Explanation: In order to understand this, you need to understand what inertia means. In short, inertia is a property of matter by which it continues in its existing state of rest or uniform motion in a straight line, unless that state is changed by an external force.
Mendel crossed tall pea plants with short pea plants. the offspring were all tall plants.
1. Which allele is recessive?
2. Which allele is dominant?

please hurry
Answer:
1. short allele
2.tall allele
what is the symbiotic relationship of bighorn sheep and worms
Answer:
Lungworms live in the lungs of bighorn sheep causing them to be sick, or even die.
Explanation:
hope this helps
pls mark me brainliest
(b) Two containers made of Insulating material contain the same volume of water at roorh
temperature. The containers do not have lids. The volume of liquid in each container graduall- decreases.
(i) After a certain time, the temperature of the water has decreased to below room
temperature.
Explain, in terms of molecules, why the temperature has decreased.
(ii) One of the containers is wide and shallow. The other container is narrow and deep.
Predict which container has the greater rate of cooling. Explain your answer.
Answer:
See Explanation
Explanation:
Evaporation is an endothermic process, an endothermic process is one in which energy is absorbed from the surrounding thereby making the system to be at a lower temperature compared to the environment.
Being an exothermic process, molecules take away energy from the liquid surface as they escape from the liquid surface hence, evaporation causes the temperature of the water to be decreased below room temperature.
The rate of evaporation and cooling depends on the surface area of liquid. The liquid in the wide and shallow container has a greater rate of cooling because it has a greater surface area than the liquid in the narrow and deep container.
Make a line graph of the data found above. On the same graph, show the average number of paper clips
each electromagnet picked up for each voltage tested. Plot the voltage on the x-axis and the average
number of paper clips picked up on the y-axis. Scale the x-axis in intervals of 1.5 volts and scale the y-axis in intervals of 5 paper clips.
Answer:
I tried my best lol, but here's what I put. I hope this helped a bit
The graph of the voltage on the x-axis and the average number of paper clips picked up by the electromagnet on the y-axis is shown in the picture attached.
What is an Electromagnet ?An electromagnet is a type of magnet in which the magnetic field is produced by an electric current.
It usually consist of wire wound into a coil. When current is passed through the wire a magnetic field is created which is concentrated in the hole, denoting the center of the coil.
The Battery voltage was plotted on the x axis and the average paper clips picked up by 25 turn electromagnet and 50 turn electromagnet was plotted on y axis and the following graph was obtained.
To know more about Electromagnet
https://brainly.com/question/23727978
#SPJ2
The process by which particles in a solution spread out evenly is called?
Answer:
this is your answer.....
1. You have 19.7 grams of a material and wonder how many moles were formed. Your
friend tells you to multiply the mass by grams/mole. Is your friend correct?
Hint Set in the solution an
Answer:
No. If you were to set up what the friend said it would look like this:
19.7g × [tex]\frac{grams}{moles}[/tex] ==> [tex]\frac{19.7 grams}{1}[/tex] ×
The above does not look right because the grams do not cancel out. If it's not cancelled, it would be included in your final answer, but you're looking for moles not grams.
When setting up a stoichiometry equation, you have to put the same unit of measurement (ex- grams, cm, mm, etc.) on the numerator of one side and the denominator of the other side.
This would cancel out the unit.
For example: If you wanted to find out how much of 320 cm are in a meter.
*there are 100 cm in 1 meter*
(1. always start with the given number!)
(2. set up the next fraction where you can cancel out cm)
[tex]\frac{320cm}{1}[/tex] × [tex]\frac{1 meter}{100 cm}[/tex] = 3.2 m
Going back, your friend would have to switch the units from grams/moles to moles/grams. It would cancel out grams, which would leave moles. Therefore, moles will be included in your final answer.
[tex]\frac{19.7 grams}{1}[/tex] × [tex]\frac{moles}{grams}[/tex] = _?_ moles
You will take the ratio of mass and molar mass. Hence my friend is wrong.
Number of moles and molar massThe formula for calculating the number of moles is expressed as:
[tex]Moles=\frac{mass}{molar mass}[/tex]
Given the following
Mass = 19.7 grams
Since the molar mass is measured in gram per mole, hence to get the number of moles, you will take the ratio of mass and molar mass. Hence my friend is wrong.
Learn more on molar mass here: https://brainly.com/question/15476873
The rate constant for a first order reaction
is 2.80-10-35-1 at 60.0°C. The rate
constant at 45.0°C is 4.80.10-4 5-1. What
is the activation energy for the reaction?
[ ? ]kJ/mol
Recall that R = 8.314 J/mol K
Answer:
E_a = 103.626 × 10³ KJ/mol
Explanation:
Formula to solve this is given by;
Log(k2/k1) = (E_a/2.303R)((1/T1) - (1/T2))
Where;
k2 is rate constant at second temperature
k1 is rate constant at first temperature
R is universal gas constant
T1 is first temperature
T2 is second temperature
We are given;
k1 = 2.8 × 10^(-3) /s
k2 = 4.8 × 10^(-4) /s
R = 8.314 J/mol.k
T1 = 60°C = 333.15 K
T2 = 45°C = 318.15 K
Thus;
Log((4.8 × 10^(-4))/(2.8 × 10^(-3))) = (E_a/(2.303 × 8.314))((1/333.15) - (1/318.15))
We now have;
-0.76592 = -0.00000739121E_a
E_a = -0.76592/-0.00000739121
E_a = 103.626 × 10³ KJ/mol
Use the drop-down menus to identify the class of compounds to which each structure belongs.
(use image [brainliest will be given])
Answer:
Use the drop-down menus to identify the class of compounds to which each structure belongs.
✔ carboxylic acid
✔ ether
✔ alkyl halide
✔ amine
The class of compounds of structure given as below:
A. Carboxylic acid
B. Ether
C. Alkyl Halide
D. Amine
What are compounds ?A chemical compound is a material that contains atoms from many chemical elements bonded together by chemical bonds. It is made up of numerous similar molecules. Hence, a molecule made up of only one type of atom is not a compound.
Ionic compounds, covalent compounds, and organic compounds are a few different types of chemical compounds. Ions, which are charged particles, make up ionic compounds.
Atoms that share electrons are the building blocks of covalent molecules. Carbon atoms are covalently bound to hydrogen atoms in organic molecules.
-COOH group represents carboxylic acid, -o- represents ether, -Cl is alkyl halide and NH2R is amine.
Thus, The class of compounds of structure is Carboxylic acid.
To learn more about the compound, follow the link;
https://brainly.com/question/13516179
#SPJ6
Arrange ionic compounds in order of decreasing amount of energy released in lattice formation .NaF,MgS,TLN and
The question is incomplete, the complete question is;
Arrange the following ionic compounds in order of decreasing amount of energy released in lattice formation: NaF, MgS, TlN, and CsI.
Answer:
TlN> MgS > NaF > CsI
Explanation:
Recall that lattice energy is the energy evolved when a crystal lattice is formed from its component ions.
The lattice energy depends on the size of the ions. The smaller the sizes of the ions, the larger the lattice energy.
The order of energy released in lattice formation for these compounds is;
TlN> MgS > NaF > CsI
What is the volume in liters that is needed to create a 0.5 M solution with 4.9 moles of Fe(OH)2? Round your answer to 1 decimal.
Answer:
[tex]0.5\: moles\: occupies \: 1 \: litre \\ 4.9 \: moles \: will \: occupy \: ( \frac{4.9}{0.5} ) \: moles \\ = 9.8 \: litres[/tex]
Describe how plants and animals may change their characteristics in order to adapt to changes in their environment
please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
One way an animal may adapt to the environment and change characteristics is for example lizards. Lizards are preyed on by birds and other small mammmals. To avoid this some lizards have adapted to color changes or camofaluge.
Explanation:
Answer:
take a octopus for example, they change thw color of their skin to match their environment to stay hidden.
Explanation:
or take a decomposing plant for example, they mimik the process of decomposing to draw animals away
How many grams of each product would be produced if a 155 lb person consumed the lethal dose of lead?
How are humans activity contributing to climate change?
Answer:
Some human activities that contribute to climate change would be fracking, driving vehicles, deforestation, and developing cities. Fracking releases methane and other greenhouses gases into the atmosphere. Driving vehicles, like cars or trains, also releases carbon dioxide into the atmosphere. Deforestation decreases the amount of oxygen being produced. Developing cities also contributes because it consumes almost 80% of the world's energy, as well as producing 60% of the greenhouse gases.
A solute dissolved in water will cause
A the boiling point to increase
B the freezing point to increase
C the melting point to increase
D the boling point to decrease
(It’s A)
Answer:
A the boiling point to increase
Explanation:
That is a colligative property