Answer:
it is magnesium and barium and calcium
Magnesium, Barium, and Calcium will bond ionically with chlorine such that the formula would be written as MgCl₂, BaCl₂, and CaCl₂.
What are ionic compounds?Ionic compounds can be explained as crystalline solids which are formed by packing of opposite charge ions due to the interactions of the ions. An Ionic compound is produced when metal reacts with non-metal.
In ionic compounds, oppositely charged ions are held by ionic bonds due to the interactions between ions. The ions are formed from atoms by gaining or losing electrons in order to attain their noble gas configuration.
A cation in ionic compounds is the electropositive ion and has the tendency to give away valence electrons. Similarly, anions in ionic compounds are electronegative ions and have a tendency to gain electrons.
The chlorine needs one electron to complete its valence shell. Therefore two chlorine will combine with a divalent cation. Therefore Magnesium, Barium, and Calcium exist as Mg⁺², Ba²⁺ , and Ca²⁺.
Learn more about ionic compounds, here:
brainly.com/question/17217225
#SPJ2
PLEASE
Why don't the particles in a solid move past one another?
A. They have no motion and cannot even vibrate in place.
B. They don't have enough energy to overcome the attractions
between them.
C. They bounce off the walls of their container and back into place.
D. They move independently of one another.
Answer:
B. They don't have enough energy to overcome the attractions between them.
Answer:They don't have enough energy to overcome the attractions
between them.
Explanation:
A. They have no motion and cannot even vibrate in place.
B. They don't have enough energy to overcome the attractions
between them.
C. They bounce off the walls of their container and back into place.
D. They move independently of one another.
I can't leave till I answer please help!!
Answer:
The answer is 2 all you do is divide the 6.02 and 3.01 and you get 2
True or False: Bald eagles have white heads, which is an inherited trait.
A
True
B.
False
Answer:
A true
Explanation:
Bald eagles have white heads distinguishing them from the rest of their body(which is dark brown
What is the electronegativity difference between oxygen and fluorine? What type of bond is this?
Answer:
Veja, por exemplo, que os elementos mais eletronegativos são os que estão no canto superior direito da tabela, isto é, o flúor (4,0) e o oxigênio (3,5), e os menos eletronegativos são os que estão no canto inferior esquerdo, que são o frâncio (0,8) e o césio (0,8).
Explanation:
Meiosis does PMAT twice! That means there is prophase I and prophase II. There is metaphase I and metaphase II. If the cartoon below has chromosomes in the middle of the cell, how would you know whether it was in metaphase I or metaphase II?
Answer:
- there are homologous chromosomes in the middle of the cell (metaphase I)
- there are sister chromatids in the middle of the cell (metaphase II).
Explanation:
Is neon an atom or ion
List the stages of the Flowering Plant Life Cycle starting with the seed
What is the answer for 250 K = ? °C
Answer:
This is your answer ☺️☺️☺️
Answer:
-23.15
Explanation:
PLEASE HELP ASAP!!!! WILL GIVE BRAINLIEST TO CORRECT ANSWER!!
The characteristics of a certain gas are shown below.
Characteristics of a Gas
Characteristic Description
Compound Oxygen gas
Condition STP
Mass 4.8 grams
What is the expected density of the above sample of gas?
A. 1.90 g/L
B. 1.82 g/L
C. 1.56 g/L
D. 1.43 g/L
Answer:
1.56g/L it will be as per my calculation if I am not wrong so
Answer: D: 1.43
The expected density of the given sample of oxygen gas at STP can be calculated using the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
At STP, the pressure is 1 atm and the temperature is 273 K. We are given that the mass of the oxygen gas is 4.8 g. To find the number of moles of oxygen gas, we can use its molar mass, which is 32.00 g/mol:
n = mass / molar mass = 4.8 g / 32.00 g/mol = 0.15 mol
Using the molar volume of an ideal gas at STP, which is 22.4 L/mol, we can find the volume of the oxygen gas:
V = n × molar volume = 0.15 mol × 22.4 L/mol = 3.36 L
Therefore, the expected density of the given sample of oxygen gas at STP is:
density = mass / volume = 4.8 g / 3.36 L = 1.43 g/L
Therefore, the expected density of the given sample of oxygen gas at STP is 1.43 g/L.
When bonds are (broken/formed) there is a positive energy change.
Answer: Hello i am confused are you asking a question?
Explanation:
BRAINLIEST! A reaction is set up between magnesium and hydrochloric acid. After 30 seconds, the magnesium had decreased in mass by 45g. What was the rate of this reaction?
Answer:
Acidic oxides, or acid anhydride, are oxides that react with water to form an acid, or with a base to form a salt. They are oxides of either nonmetals or of metals in high oxidation states.
Explanation:
Gaseous ethane CH3CH3 reacts with gaseous oxygen gas O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. What is the theoretical yield of carbon dioxide formed from the reaction of 1.8g of ethane and 4.6g of oxygen gas?
Answer:
mass of CO₂ produced = 5.06 g of CO₂
Explanation:
Equation of the reaction: 2CH₃CH₃ + 5O₂ ---> 4CO₂ + 6H₂O
From the equation of the reaction, 2 moles of gaseous ethane reacts with 5 moles of oxygen gas to produce 6 moles of water.
molar mass of ethane = 30 g/mol
molar mass of oxygen gas = 32 g/mol
number of moles of ethane present in 1.8 g = 1.8/30 = 0.06 moles
number of moles of oxygen gas present in 4.6 g = 4.6/32 = 0.14375 moles
mole ratio of oxygen gas to ethane = 2.4 : 1
Therefore, oxygen is the limiting reactant
0.14375 moles of oxygen will react with 0.06 moles of ethane to produce 4/5 * 0.14375 moles of CO₂ = 0.115 moles of CO₂
molar mass of CO₂ = 44 g/mol
mass of CO₂ produced = 0.1725 * 44
mass of CO₂ produced = 5.06 g of CO₂
2 points
Stu Dent wants to create a salt water solution. He uses 0.614 moles of salt and 182 milliliters of water. What is the molarity of the solution?
Type your answer...
Answer: The molarity of solution is 3.37 M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute = 0.614
[tex]V_s[/tex] = volume of solution in ml = 182 ml
Now put all the given values in the formula of molarity, we get
[tex]Molarity=\frac{0.614\times 1000}{182}=3.37M[/tex]
Therefore, the molarity of solution is 3.37 M
11. How many moles of O2 can be produced by letting 12.00 moles of
KCIO3 react?
2KCIO2 → 2KCI + 30,
A. 18 mol 02
B. 36 mol 02
C. 1.5 mol 02
D. 6 mol 02
Answer:
Molarity of the solution = 0.08 M
Further explanation
Molarity is a way to express the concentration of the solution
Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
Where
M = Molarity
n = Number of moles of solute
V = Volume of solution
0.5 lb=226,796 g
MW silver nitrat - AgNO₃ = 169,87 g/mol
mol AgNO₃ :
Molarity :
Can someone please check my answer??!!!
Answer:
I think its correct
Which of the following is TRUE about a physical change to a substance?
A.
The atoms in a substance will divide.
B.
The mass of a substance will increase.
C.
New substances will likely be formed.
D.
The substance will have the same chemical properties.
Answer:
D.
The substance will have the same chemical properties.
Explanation:
Physical changes do not alter the chemical composition of a substance, so the chemical properties will not change.
A student wants to make 50-mL of a 0.6 mg/L solution of acetic acid. She will be making the solution by diluting a stock with a concentration of 2.0 mg/L. Put the steps for her dilution in order. 4. Cap the flask and invert several times to mix. 2. Fill the volumetric flask with deionized water until the meniscus touches the mark. 6. Swirl the flask to mix the contents. 1. Obtain a 50-mL volumetric flask. 3. Use a pipet to add the appropriate volume of stock solution to the flask. 2. Add approximately 10 mL of deionized water to the empty flask.
Answer:
The steps in order are;
1. Obtain a 50-mL volumetric flask
2. Add approximately 10 mL of deionized water to the empty flask
3. Use a pipet to add the appropriate volume of stock solution to the flask
4. Cap the flask and invert several times to mix
5. Fill the volumetric flask with deionized water until the meniscus touches the mark
6. Swirl the flask to mix the contents
The volume of the acetic acid to be added to the solution is 15 mL
Explanation:
The given steps are;
4. Cap the flask and invert several times to mix
5. Fill the volumetric flask with deionized water until the meniscus touches the mark
6. Swirl the flask to mix the contents
1. Obtain a 50-mL volumetric flask
3. Use a pipet to add the appropriate volume of stock solution to the flask
2. Add approximately 10 mL of deionized water to the empty flask
The given parameters are;
The volume of the volumetric flask = 50-mL
The concentration of the final solution of acetic acid = 0.6 mg/L
The concentration of the stock solution = 2.0 mg/L
Let 'x' represent the volume of the stock solution added, we have;
2.0 mg/L·x + (50 - x)×0 = 0.6 mg/L × 50-mL
x = 0.6 mg/L × 50-mL/(2.0 mg/L) = 15 mL
The volume of the stock solution to be added, x = 15 mL
16.1 g of bromine are mixed with 8.42 g of chlorine to give an actual
yield of 21.1 g of bromine monochloride.
The question is complete, the complete question is;
16.1g of bromine are mixed with 8.42g of chlorite to give an actual yield of 21.1g of bromine monochloride.
Answer:
91 %
Explanation:
Br2 + Cl2 ------>2BrCl
Number of moles of Chlorine = 8.42/71 = 0.119 moles
If 1 mole of Cl2 yields 2 moles of BrCl
0.119 moles of Cl2 will yield 0.119 moles * 2/1 = 0.238 moles of BrCl
Number of moles of Br2 reacted = 16.1/160 = 0.1 moles
If 1 mole of Br2 yielded 2 moles of BrCl
0.1 moles of Br2 yields 0.1 * 2/1 = 0.2 moles of BrCl
Bromine is the limiting reactant.
Mass of BrCl produced = 0.2 moles * 115.357 g/mol = 23.07 g
Theoretical yield = 23.07 g
Actual yield = 21.1 g
Percentage yield = Actual yield/Theoretical yield * 100
= 21.1/23.07 * 100 = 91 %
On earth what is the main force that resists all motion?
Answer: Friction
Explanation: Friction is a force that opposes motion. When two objects are in contact, friction is acts in a direction opposite to the motion of the object. Please give me brainliest!!!!!!!
Answer: friction: The resistance an object meets when moving over a surface or through a gas or liquid; it is the force that resists the motion of two surfaces that are touching each other.
Explanation:
What is the partial pressure of hydrogen gas in a mixture of hydrogen Nitrogen, and helium if the total pressure is 700 partial pressure is 155 mmHg, and the partial pressure of nitrogen is 265 mmHg?
How does stoichiometry work?
Answer:
stochiometry works with measuring quantitative relationships and used to determine the amount of products and reactants that are produced or needed in a reaction
Answer:
Stoichiometry is the calculation of reactants and products in chemical reactions in chemistry. Stoichiometry is founded on the law of conservation of mass where the total mass of the reactants equals.
The balanced chemical equation for the reaction of nitrogen (N2) and hydrogen (H) to form ammonia (NH3) is given below.
N2+ 3H2 + 2NH3
How many grams of hydrogen would be to react with 14.0 g of nitrogen?
Answer:
V= 33.6L
Explanation:
The reaction between hydrogen and nitrogen is
3H2(g) + N2(g) + 2NH3(g)
how does wind energy combined with machines cause a sailboat to move?
marking as brainliest
Answer:
The wind pushes the sails from behind, causing the boat to move forward.
Answer:
Wind energy obtained by the machine is converted into kinetic energy as it functions and thus enabling the boat to move.
Together, the forces of drag, from the water, and the pressure from the wind against the sail itself push the craft forward. Angling too sharply into the wind causes the forces on the boat to become unbalanced, and moves the boat sideways in the water.
CAn someone help me with this?
Answer:
I think D. sorry if I'm wrong:)
is CH3CH2COOCH2 an aldehyde structure?
someone please help with this
Answer:
a. triple bond
b.diatomic atom
c. covalent bond
d. non polar covalent bond
e. covalent bond
f. sigma bonds
10. Lead nitrate solution mixed with sodium sulfate solution forms lead sulfate as a
precipitate.
Pb(NO3)2+ Na2SO4-
PbSO4+ 2NaNO3
In an experiment, the theoretical yield of lead sulfate for this reaction was 2.85 g.
In the experiment only 2.53 g of lead sulfate is obtained.
Calculate the percentage yield of lead sulfate in this experiment. * IT
Answer:
88%.
Explanation:
The percentage yield of lead sulfate in this experiment is 88% if 2.53 is divided by 2.85 and multiply by 100. The percentage yield can be calculated when the experimental yield is divided by theoretical yield and then multiply by 100. The percentage yield tells us about the actual yield that is gained in the end of experiment which is lower than theoretical yield.
Who coined the term "ridgeology"?
Answer:
David R. Ashbaugh
Explanation:
David R. Ashbaugh is a Canadian police officer known for his extensive research on the friction ridge identification, introducing for the first time the use of the term ridgeology in forensic identification and the ACE-V methodology.
Which of the following general trends are true for the atomic mass of elements in the periodic table?
1. The atomic mass is usually a decimal number.
II. The atomic mass is always smaller than the atomic number.
III. The atomic mass increases from top to bottom down a group.
IV. The atomic mass increases from left to right across a period.
HELP PLEASE THERE IS NO PICTURE PLZ JUST LEAVE THE ANSWER!!
Answer:
D. the atomic mass increases from left to right
Explanation:
Why are fossil fuels considered to be a nonrenewable resources? Please help
Answer:
They're considered nonrenewable because they take millions of years to develop. They can't be renewed as fast as we're taking them.