compare and contrast a current through a circuit with a static discharge. true or false: for the circuit, the charge travels through a wire. for a static discharge, the charge is transferred from one object to another.

Answers

Answer 1

Electrons flow continuously through a circuit when current is present.

A static discharge is a very quick, irregular transfer of charge.

Static discharge is the abrupt movement of electrons from one charged object to another.

Static discharge is the abrupt passage of electrons. The spark you see and the jolt you experience are both caused by an electron discharge.

For the circuit, the charge travels through a wire.-True

For a static discharge, the charge is transferred from one object to another.-True

What is charge?

The basic unit of electricity is charge (or, more precisely, electric charge).

Everything in electricity is a charge.

The physical characteristic of matter that causes it to feel a force when exposed to an electromagnetic field is called electric charge. The two types of electric charges that protons and electrons most frequently carry are positive and negative charges.

To know more about charge:

https://brainly.com/question/4105309

#SPJ4


Related Questions

In comparing two unequal forces on a rigid body, is it possible to have the larger force produce less torque than the smaller force?.

Answers

Yes, in comparing two unequal forces on a rigid body, it is  possible to have the larger force produce less torque than the smaller force.

How is the possibility for difference in torque explained ?The equation used to calculate the amount of torque given the amount of force and the separation between the force's point of application and its axis of rotation is given by,

                            [tex]\tau = Fd[/tex]

We can see from this equation that the torque magnitude depends on both the force magnitude and the perpendicular angle  between the force application point and the axis of rotation. This indicates that ,it is possible for a larger force to create less torque than a smaller force.This is  principally as a result of the separation between the places of application of the two forces from the axis of rotation. For instance, on a see-saw, if one person is significantly farther away from the fulcrum than the other, the heavier person can be lifted or balanced by the farther person.

To learn more about torque, refer:

https://brainly.com/question/20691242

#SPJ4

an irregularly shaped object 10. m long is placed with each end on a scale. if the scale on the left reads 74 n and the scale on the right reads 93 n how far from the left is the center of mass?

Answers

The center of mass of an irregularly shaped object 10 m long that is placed with each end on a scale from the left is 5.57 m

Let the object length be L.

L = 10 m

Let the distance from center of mass to the right end be x. The irregular shaped object exerts an upward force on both left and right side.

Fl = 74 N

Fr = 93 N

Since the object is at rest,

τ = 0

Fr * x - Fl ( L - x ) = 0

93 x = 74 ( 10 - x )

93 x = 740 - 74 x

167 x = 740

x = 4.43 m

Distance from left end = L - x

d = 10 - 4.43

d = 5.57 m

To know more about center of mass

https://brainly.com/question/8662931

#SPJ4

select all options that can correctly complete the following statement. if the temperature of a gas in a sealed container increases, we can determine... (note: it is possible for the volume of the gas to change.) the sign of the work done on the gas (e.g., positive, negative, or zero). the sign of the change in thermal energy of the gas (e.g., positive, negative, or zero). the sign of the heat exchange with the gas (e.g., positive, negative, or zero).

Answers

The sign of heat exchange is positive.

Work Done on the gas is zero.

The sign of change in thermal energy is also positive.

Since the chamber container is closed, So, Volume of the container is fixed.

dV = 0

Since Work Done by the system is dW = PdV = 0

Work Done by the gas and Work done by the gas is zero.

We use First Law of Thermodynamics, we have :

dQ = dU +dW

dQ = dU + PdV

dQ = dU = [tex]C_{v} dT[/tex]

Also thermal energy ∝ T

In the given situation, The temperature is rising, dT > 0

So, we can conclude that dQ > 0, dU > 0 and [tex]dE_{thermal} > 0[/tex]

The sign of heat exchange is positive.

Work Done on the gas is zero.

The sign of change in thermal energy is also positive.

To read more about Work Done, visit https://brainly.com/question/16983353

#SPJ4

You are a crash test analyst for Toyota. Car 1 (mass = 900 kg) is at rest while Car 2 (mass = 1700 kg) is traveling toward Car 1 at 15.0 m/s. The two cars collide and and their bumpers stick together. What is the resulting momentum after the collision?

Answers

The momentum after the collision is 25500 kg⋅m/s. Each object's momentum may change, but the overall momentum must not change.

What is Momentum ?

In Newtonian mechanics, momentum is calculated as the sum of an object's mass and velocity. It has a magnitude and a direction, making it a vector quantity.

The rate of change of a body's momentum is equal to the net force exerted on it, according to Newton's second law of motion. Regardless of the frame of reference, momentum is a conserved quantity in any inertial frame, which means that if an enclosed system is not subject to outside influences, its total linear momentum remains constant.

The formula for calculating momentum is expressed as

momentum = mass x velocity

According to the law of conservation of momentum, initial momentum = final momentum

The formula for initial momentum is

m1u1 + m2u2

where

m1 = mass of first car

u1 = initial velocity of first car

m2 = mass of second car

u2 = initial velocity of second car

From the information given,

m1 = 900

u1 = 0 because it is at rest

m2 =  1700

u2 = 15.0 m/s

Initial momentum = 900 x 0 +  1700 x 15.0 = 25500

Momentum after the collision is 25500 kg⋅m/s

To learn more about Momentum refer :

https://brainly.com/question/1042017

#SPJ1

during an isothermal compression of an ideal gas, 200 j of heat must be removed from the gas to maintain constant temperature. how much work is done by the gas during the process?

Answers

The overall work done for isothermal compression is 200 Joules.

Theory :

Thermal and ISO stand for temperature and constant, respectively. The processes in which the temperature is constant are known as isothermal processes. When a system's volume is reduced or its pressure is raised, this is referred to as compression. The compression process known as isothermal compression occurs at a constant temperature. A closed system is where the thermodynamic process takes place. Thermal equilibrium is maintained by the process.Integration of dW, where dW is the displacement work or PdV, constitutes the work produced by an isothermal process.Boyle's law, which applies to an ideal gas in this process, governs the behavior of the gas and the work it does.The system's molar heat capacity in this process is infinite because there is no temperature difference.

Mathematics & Calculations:

[tex]dQ=dU + w\\\\\\dq=heat \\dU=energy\\\\dU=nCdT=0 \\\\dQ=w\\\\dQ =200J\\\\Work=w=200J[/tex]

To know about molar heat capacity -

https://brainly.com/question/28588878

#SPJ4

the heating coil of a water heater has a resistance of 20 ohms and operates at 210 v. how long does it take to raise the temperature of 200 kg of water from 15oc to 80oc? ( cwater

Answers

The heating coil of a water heater has a resistance of 20 ω and operates at 210 v.  It takes 5 hrs to raise the it take to raise the temperature of 200 kg of water from 15oc to 80oc.

What is resistance?

Obstruction is a proportion of the resistance to flow stream in an electrical circuit. Opposition is estimated in ohms, represented by the Greek letter omega (Ω). Ohms are named after Georg Simon Ohm (1784-1854), a German physicist who concentrated on the connection between voltage, current and opposition. In any case, obstruction and conductance are broad as opposed to mass properties, implying that they additionally rely upon the size and state of an item. Channels permit the free progression of power. Yet, in materials, for example, semiconductors and covers, the power encounters a specific power that goes against the free progression of electrons.

Learn more about resistance, refer: brainly.com/question/27544576

#SPJ4

a tire swing hanging from a branch reaches nearly to the ground (see the photo above). how could you estimate the height of the branch using only a stopwatch?

Answers

We may determine the height of the branch using the pendulum's expression of time period. The swinging tyre can be compared to the pendulum's swinging bob. Here, the pendulum's length will match the height of the branch.

So let h be. From the formula for the pendulum's duration, let T denote the time period of the tire's swing.

T = 2π√l/g where l is length of pendulum

l = h so

T = 2π√h/g

h = T^2g/4π^2

Calculating the tyre swing time allows us to determine the height of the branch.

A stop watch can be used to estimate the length of the tyre swing. Time period is the length of time it will take the tyre to go from one extreme to the other before returning.

Learn more about Time period here:

https://brainly.com/question/24255969

#SPJ4

how much force is the person exerting toward the right (the force that would go towards trying to move the car)?

Answers

Newton's second law of motion gives the following definition of the force formula: "Force exerted by an object equals mass times that object's acceleration." F = m ⨉ a.

To apply this formula, you must use SI units for force (newtons), mass (kilograms), and acceleration (meters per second squared). Every automobile, truck, boat, helicopter, plane, and even spacecraft, Lift, Weight, Thrust, and Drag Newton's first law states that your body, like all mass, tries to remain in its current location. Your body attempts to stay where it was, which is on the left, if the car turns to the right. If an object is travelling and its mass is m, its rate of slowing down is v, and the time it takes is t, then.

Learn more about force here-

https://brainly.com/question/13191643

#SPJ4

If the sun mysteriously gets twice as massive as it is right now, what effect will it have on its pull on mars?.

Answers

Answer:

well, it would start burning it slowly. but it wouldn't just melt it immediately. then, if it got any bigger it would definitely melt it

Explanation:

(1) the electrons in a certain material have a full band of possible energies separated from a completely empty energy and by energy gap of 2.8 ev. this material is a

Answers

When the electrons in a certain material have a full band of possible energies, the material is a semiconductor.

What is a semiconductor?

A semiconductor is a material with specific electrical properties that allow it to be used as the foundation for computers and other electronic devices. It is typically a solid chemical element or compound that conducts electricity only under certain conditions.

If the valence band is completely full and the conduction band is completely empty, electrons cannot move within the solid because there are no available states, and no current generation occurs because there is no net charge carrier mobility. The semiconducting material is represented by an energy gap of 1.1 eV.

Learn more about semi conductor on:

https://brainly.com/question/1918629

#SPJ1

2. A place-kicker strikes a football with a horizontal velocity of 22 meters per second and vertical velocity of 10 meters per second. The ball reaches its maximum height within 1. 02 seconds. What is the total time that the ball with spend in the air?

Answers

The total time that the ball with spend in the air is 2.04 Seconds.

As per the data given in the above question.

It is given that the initial velocity of football is 22 meters per second.

And vertical velocity is 10 meters per second.

Also the ball reaches its maximum height within 1. 02 seconds.

We have to find the Time of flight.

As we know that the time of flight i.e ball travel in air is just double the maximum-height time.

Total time of ball in air is equal to double the maximum-height time.

[tex]=2 \times 1.02\\=2.04 \:Seconds[/tex]

The ball will be in the air for a total of 2.04 seconds.

For such more question on Time of flight.

https://brainly.com/question/4441382

#SPJ4

an optical engineer needs to ensure that the bright fringes from a double-slit are 15.7 mm apart on a detector that is 1.37 m from the slits. if the slits are illuminated with 633 nm light, how far apart should the slits be?

Answers

In this case the angle made by fringes is 0.5291

Explain in detail.

Tan θ = 15.7 x 10-3 / 1.7

         = 0.5291

The condition of Interference is

d sin θ 0.5291 = (1) 633NM

d = (1)633nm / sin 0.5291

   = 68.54 x 10-6 m

    = 69.54 um

To know more about Interference here

https://brainly.com/question/718448

#SPJ4

In a study conducted by a University of Illinois researcher, the football team at Unity High School in Tolono, IL was equipped for an entire season with helmets containing accelerometers. Information about every impact in practice and in games was sent to a computer present on the sidelines. The study found that the average force on a top of the head impact was 1770 N. If the initial velocity of the head was 2.09 m/s and the collision brings the head to a stop, and assuming the head has a mass of 4.12 kg, determine the duration of the impact.

(Note: we are treating the head as a free body which is a bit of an approximation).

Answers

The duration of the impact, given that the head has a mass of 4.12 Kg is 0.005 s

How do I determine the duration (i.e time)?

We'll begin by obtaing the impulse. This can be obtained as follow:

Initial velocity = 2.09 m/sMass (m) = 4.12 KgFinal velocity = 0 m/sImpulse =?

Impulse = m(v + u)

Impulse = 4.12 × (0 + 2.09)

Impulse = 4.12 × 2.09

Impulse = 8.61 Ns

Finally, we can obtain the duration of the impact. This can be obtained as follow:

Force (F) = 1770 NImpulse = 8.61 NsDuration (t) =?

Impulse = force × time

8.61 = 1770 × t

Divide both sides by 1770

t = 8.61 / 1770

t = 0.005 s

Thus, we can conclude that the duration is 0.005 s

Learn more about time:

https://brainly.com/question/64749

#SPJ1

how do the friction force and applied force compare before and after the object is in motion? are these forces balanced or unbalanced? predict the net force.

Answers

Answer: In order for an object to move at a constant speed or to accelerate or decelerate, the applied (horizontal) force and the frictional force must be unequal.

Explanation: How does the frictional force compare to the applied force?

Frictional force serves to keep the crate in place by acting in the opposite direction as the applied force. The term for this rubbing force is static friction. If you push harder, the frictional force will rise until it achieves its maximum value as a result of the increased applied force.

Do we have even or uneven friction?

Friction was the driving force that kept the bucket in place. It absorbed the tiny force applied to the bucket and offset it. a move

To know more about Friction visit;

https://brainly.com/question/28356847?

#SPJ4

at what temperature is the reading on a fahrenheit scale twice the reading on a celsius scale? express your answers, separated by a comma, to three significant figures.

Answers

The reading on the Fahrenheit scale is twice the temperature on the Celsius scale at 160 degrees Celsius.

Relationship between Fahrenheit scale and Celsius scale

F=9C/5+32

Applying the given condition

2C=F (given)

Replace F in the first formula with 2C from the second,

Then 2C = 9C/5+32

Subtract 9/5C from both sides,

2C-9C/5=32

1C/5=32

C= 160 degrees

Therefore 160 degrees Celsius scale is twice as long as the Fahrenheit scale

To learn more about temperature click here https://brainly.com/question/11464844

#SPJ4

a figure skater is rotating with her arms stretched out away from her body. as she pulls her arms in towards her body, what happens to her angular velocity?

Answers

A skater is rotating with her arms stretched out away from her body. As she pulls her arms in towards her body, her angular velocity increases.

If she pulls her arms in towards her body, moment of inertia reduces. And her angular momentum is conserved.

According to the law of conservation of angular momentum, we can say that, in the absence of external torque, the angular momentum of a system of particles does not change.

So, as she reduces her moment of inertia, her angular velocity increases. This results in the increase of her spinning speed.

To know more about angular velocity:

https://brainly.com/question/15876424

#SPJ4

what is the shape of the worldline of an object at rest, when time is plotted on the vertical axis? a horizontal line a diagonal line going up to the right a diagonal line going down to the right a vertical line a point

Answers

The shape of the worldline of an object when it is plotted on the vertical axis will be a vertical line to point.

When an object is at rest, it will not change its coordinates when it moves. At this time, it will be fixed on the horizontal axis and move on the vertical axis. So, the shape of the object will be a straight vertical line.

The concept explained is the theory of relativity, which was proposed by Albert Einstein. It's a theory of gravity that mentions that the force of gravity occurs from the curvature of space and time. The worldline of an object is the time or way that an object spends in space.

This theory mainly explains how an object behaves in space and an object with a higher mass takes a lot of time.

To learn more about Theory of Relativity,

brainly.com/question/23689770

#SPJ4

what potential difference, acting over a distance of 2.0 cm, would be needed to balance the downward force of gravity so that an electron would remain stationary? assume that the electric field is uniform.

Answers

An object is put through work (energy) when it is lifted off the ground. You might think of it as the force operating on an object to try to get it back to its lowest potential energy (the "ground state") when you do so.

The object obtains potential energy equal to the force needed to raise it (roughly) when you do so. Water towers and dams are frequent examples of structures that humans have used to harvest gravitational potential energy.

Every facet of modern life, including using your phone or turning on your hose, depends on your ability to harness potential energy (we do it more with fuels rather than gravity nowaday though if you think about it, gravity is why we have oil inthefirstplace).

Learn more about energy here-

https://brainly.com/question/1932868

#SPJ4

What is the minimum diameter at section (1) in the pipe below to avoid cavitation at that location? Take D2= 15 cm. Neglect friction head loss in the pipe. (3) Water 5 m (1) (2)

Answers

The minimum diameter at section (1) in the pipe below to avoid cavitation at the location is 16.6 cm.

Look at the picture

In section (1) according to Torricelli's law the speed of water
v² = 2gh
h = the height of fluid above the opening = 5 m
g = acceleration due to gravity = 9.8 m/s²
v² = 2gh = 2 × 9.8 × 5 = 196 [tex]v = \sqrt{196}[/tex]
v = 14 m/sThe preassure in section (1)
p₁ = p atm + p hidrostatic
p₁ = 1.01 × 10⁵ + ρgh
p₁ = 1.01 × 10⁵ + (1,000 × 9.8 × 5)
p₁ = 1.01 × 10⁵ + 49,000
p₁ = 1.5 × 10⁵ PascalThe pressure in section (2) equals atmosphere pressure because it is connected to open air.
p₂ = p atm = 1.01 × 10⁵ Pascal

According to Bernoulli's equation in sections (1) and (2)

p₁ + 0.5 ρv₁² = p₂ + 0.5 ρv₂²

1.5 × 10⁵ + (0.5 × 1,000 × 14²) = 1.01 × 10⁵ + (0.5 × 1,000 × v₂²)

1.5 × 10⁵ - 1.01 × 10⁵ + 98,000 = 500 × v₂²

49,000 + 98,000 = 500 × v₂²

147,000 = 500 × v₂²

v₂² = 147,000 ÷ 500

v₂² = 294

[tex]v_2 = \sqrt{294}[/tex]

v₂ = 17.15 m/s

According to the continuity equation for fluids

A₁ v₁ = A₂ v₂

[tex]\frac{1}{4} D_1^2 v_1 = \frac{1}{4} D_2^2 v_2[/tex]

D₁² v₁ = D₂² v₂

D₁² × 14 = 15² × 17.15

D₁² = 3,858.75 ÷ 14

D₁² = 275.625

[tex]D_1 = \sqrt{275.625}[/tex]

D₁ = 16.6 cm

Learn more about Bernoulli equation here: https://brainly.com/question/26761275

#SPJ4

Who has a greater weight to mass ratio, a person weighing 400 n or a person weighing 600 n?.

Answers

A greater weight to mass ratio, a person weighing 400 N or a person weighing 600 N is never possible .

What is gravity?

The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.

The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.

Weight = Mass x Acceleration due to gravity (g)

W₁/m₁ =g = W₂/m₂

400 N/m₁ = 600N/m₂ = 9.81 m/s²

So, weight to mass ratio for a person weighing 400 N and person weighing 600 N will be same.

Learn more about gravity.

brainly.com/question/4014727

#SPJ4

Self-perception only shapes physical appearance.
OA. True
OB. False

Answers

The answer would be false

Answer:

TRUE

Explanation:

a laser beam with a wavelength of 694 nm is incident on two slits 0.100 mm apart. approximately how far apart will the bright interference fringes be on the screen 5.00 m from the double slits?

Answers

The bright interference fringes seen on the screen 5.00 m from the double slits is 34.7 mm apart.

yn = n λ D / d

yn+1 = ( n + 1 ) λ D / d

λ = Wavelength

D = Distance of fringe from slit

d = Distance between slits

Δy = yn+1 - yn

λ = 694 nm = 694 * 10⁻⁹ m

D = 5 m

d = 0.1 mm = 0.1 * 10⁻³ m

Δy = [ ( n + 1 ) λ D / d ] - n λ D / d

Δy = ( n + 1 - n ) λ D / d

Δy = 694 * 10⁻⁹ * 5 / 0.1 * 10⁻³

Δy = 3470 * 10⁻⁵

Δy = 34.7 * 10⁻³ m

Δy = 34.7 mm

The interference pattern's central fringe is caused by the constructive interference of light from two slits travelling the same distance to the screen and is bright and destructive if it is dark. The central fringe is known as the zero-order fringe

To know more about bright interference fringes

https://brainly.com/question/9339363

#SPJ4

what fraction of the mass needed to halt expansion is known to exist in the form of visible mass in the universe?

Answers

The fraction of the mass needed to halt expansion is known to exist in the form of visible mass in the universe is 1 percent

What is meant by visible mass in the universe ?

Baryons, a general term for subatomic particles including protons, neutrons, and electrons, make up visible matter, also known as baryonic matter. What dark matter is constituted of is a topic of conjecture among scientists.

A mysterious, invisible substance called dark matter (25%) and a force that defies gravity called dark energy appear to make up the rest of the universe.

It is estimated that dark energy is responsible for 73% of the universe's total mass and energy. Dark matter makes up another 23% of the universe, leaving only 4% of it to be made up of ordinary matter like stars, planets, and people.

To learn more about visible mass in universe  refer to :

https://brainly.com/question/17591121

#SPJ4

. the latent heat for the water/steam transition is 2256 kj/kg, i.e., to convert 1 kg of water into steam requires 2256 kj. what is the latent heat per molecule of h2o? express your answer in joules and in ev.

Answers

Latent heat per molecule of H2O expressed in joules is 124976.7 J/mol.

Latent heat is the amount of heat energy required to change the state of a substance without changing its temperature. To calculate the latent heat per molecule of H2O, we need to use the following equation:

Latent heat per molecule = (Latent heat / Mass of 1 molecule of H2O)

The mass of one molecule of H2O is approximately 18 x 10-3 kg.

Therefore, the latent heat per molecule of H2O is:

Latent heat per molecule = (2256 kJ / 18 x 10-3 kg) = 125333.33 kJ/mol

This is equivalent to 125333.33 kJ/mol = 124976.7 J/mol

In terms of electron volts, this is equivalent to 124976.7 J/mol = 7.2 x 1020 eV.

For more questions like Latent heat click the link below:

https://brainly.com/question/13429001

#SPJ4

image shows a light ray as the ray of incidence traveling into water coming from air. three refracted rays are shown. ray a is bent towards the normal, ray b is unchanged from the incident ray, and ray c is bent away from the normal. which of the rays drawn above would be correct as the light goes from the air into the water? (5 points)

Answers

It continues to move in a new angle or direction as it slows down.

When a light ray travels from a rarer medium to a denser medium, it bends toward the normal to the boundary between the two media due to refraction.

Refraction is the bending of light beams when they pass through a medium with a variable speed. When a light ray travels from a rarer medium to a denser medium, it bends toward the normal to the boundary between the two media due to refraction. The indices of refraction of the two mediums affect how much bending occurs. As a result, when an airborne light beam encounters a denser material, it bends in the direction of normal.

To learn more about refraction of light visit:

https://brainly.in/question/37959474

#SPJ4

two capacitors of values of 1.0 μf and 0.50 μf are connected in parallel. the system is hooked up to a 100 v battery. find the electrical potential energy stored in the 1.0 μf capacitor.

Answers

The potential energy stored in the 1 μF capacitor is 4.5 x 10^-18 J.

What is potential energy?

Potential energy is the form of stored energy that depends on the interactions of various system elements. A spring's potential energy rises when it is crushed or stretched.

The energy stored in the 1.0 μF capacitor is 9.0*10^-5J

Data given;

c₁ = 1.0 μF

c₂ = 0.50 μF

V = 100 v

Calculation for Capacitor:

as given the capacitors are in series, the total capacitance is;

C = 1/c1 + 1/c2

C = 3 μF

The capacitance in the capacitor is 3 μF.

The charge of a capacitor is given as:

[tex]q = cV[/tex]

[tex]q = (3.0 \times 10^{-6}) 100[/tex]

[tex]q = 3 \times 10^{-4}[/tex] C

Calculation of Potential Energy:

The energy stored in the capacitor can be calculate as:

U = (1/2)q²c

Here, U = potential energy, q = charge, C = capacitor.

We can now proceed to use this formula and solve for the potential energy stored in the 1.0mF capacitor.

[tex]U = \frac{1}{2} (10^{-6})(3\times 10^{-6})^2[/tex]

[tex]U = 4.5 \times 10^{-18}[/tex]

From the calculations above, we can conclude that the potential energy stored in the 1mF capacitor is 4.5 x 10^-18 J.

To know more about potential energy, go to link

https://brainly.com/question/14427111

#SPJ4

A small rock bounces off the windshield of a moving car and experiences a large change in velocity. How does the car's momentum
change?

Answers

The car will slow down. If the rock is big enough and moving fast enough, the kinetic energy from the rock will transfer to the car. And because of that, the car will slow down (and the windshield will most likely shatter)

at what angle is the first-order maximum (constructive interference), not counting the center bright region, for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm? give your angle in degrees.

Answers

The angle of the first-order maximum (constructive interference) for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm is 10.47 degrees.

The angle of the first-order maximum can be calculated using the formula,

θ = mλ/d

Where θ is the angle

m is the order of the maximum

λ is the wavelength

d is the slit separation.

Plugging in the given values, we get:

θ = 1 * 450 nm / 0.0500 mm

θ = 9000 nm/mm

Converting to degrees, we get:

θ = 9000 nm/mm * (1 rad/1000 nm) * (180°/π rad)

θ = 10.47 degrees

Therefore, the angle of the first-order maximum (constructive interference) for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm is 10.47 degrees.

Learn more about constructive interference here:

https://brainly.com/question/13657481

#SPJ4

a 1.0-kg ball is thrown into the air with an initial velocity of 30. m/s. a. how much kinetic energy does the ball have? b. how much potential energy does the ball have when it reaches the top of its ascent? c. how high into the air did the ball travel?

Answers

a) Kinetic energy of ball is 450J.

A 1kg ball is thrown into the air with an initial velocity of 30m/s. Newtonian physics says the kinetic energy that the ball have is:

( [tex]\frac{1}{2} )[/tex] ×1 kg×[tex](30 \frac{m}{s}) ^{2}[/tex]= 450 J.

In physics, what is kinetic energy?

The energy a thing has as a result of motion is known as kinetic energy. A force must be applied to a thing in order to accelerate it. We must put forth effort in order to apply a force. After the job is finished, energy is transferred to the thing, which then moves at a new, constant speed.

b) Potential energy of ball is 450J

The whole amount of energy will be in the form of potential energy since the ball's kinetic energy will be equal to zero. As a result, when the ball reaches the peak of its climb, its potential energy will be 450 J.

c) 45m high into the air ball travel.

KE at start = GPE at the peak

450 = mgh

450 = (1)(g)(h)

450= (1)(10)(h)

45=h

Therefore, the ball will reach up to a height of 45m.

To know more about kinetic energy and potential energy visit:

https://brainly.com/question/20562795

#SPJ4

 

In comparing two unequal forces on a rigid body, is it possible to have the larger force produce less torque than the smaller force?.

Answers

Yes. If the smaller force is farther from the fulcrum than the larger mass.

What is rigid body?

A body that does not deform or alter shape is idealized as a hard body. Formally, it is described as a group of particles with the feature that their distance from one another does not change as the body moves.

What is torque?

When an engine exerts itself, torque, which is a twisting force, speaks to the rotational force of the engine and quantifies how much of that twisting force is accessible. Everyday activities like turning a doorknob, opening a drink bottle, using a wrench, or peddling a bicycle all involve torque.

What is force?

The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

Know more about unequal force:

brainly.com/question/227461

#SPJ4

Other Questions
the three-term contingency becomes the four-term contingency if we add a. motivating operations b. punishers brenda patton presented to the ob triage unit 2 hours ago. at that time it was determined that her membranes were ruptured, and she was admitted to the labor and delivery say you believe in the social learning theory as it applies to gender. how might this affect the way you treat a young boy who says he is not interested in reading? Selecting an object and then pressing the ______ key and selecting additional objects, allows you to group all objects together. the angelina corporations common stock has a beta of 1.5. if the risk-free rate is 4.6 percent and the expected return on the market is 12 percent, what is the companys cost of equity capital? true or false: when a company enters a market on a large scale, it would be common for potential competitors to decide against entering that market. the various elements of mass communication and interpersonal communication are the same; what variety is the Samuel prob please answer In ACDE, M/C = (x-4), m/D = (9x + 4), and m/E = (2x + 12).Find m/D. under the statute of frauds, which of the following statements is true of the one-year rule for contracts? multiple choice the possibility that a contract's terms could be performed within one year does not remove the contract from the statute's writing requirements. if a contract can possibly be performed within a year, but such performance is highly unlikely, then the contract needs to be in writing to be enforceable. under the statute, the one-year period begins the day after the contract is created, not when it is scheduled to begin. the test for compliance with the one-year rule considers the likelihood of completing the contract in one year rather than the possibility. ua hamburger hamlet (uahh) places a daily order for its high-volume items (hamburger patties, buns, milk, and so on). uahh counts its current inventory on-hand once per day and phones in its order for delivery 24 hours later. Which of the following is a function of the steering committee for an IS department? A) writing program code B) imparting training C) adapting software D) setting IS priorities a client comes to the clinic to see the health care provider for right upper abdominal discomfort, nausea, and frequent belching especially after eating a meal high in fat. what disorder do these symptoms correlate with? the fact that several walthy donors contributed more than $10 million to presidential candidates in 2016 was the result of a bobby is putting his speech together and he is going to explain how to write a poem. one line in his poem is: as we awakened dawn s pink fingers slowly began to illuminate the sky. bobby s line made use of a: Phone-Phriends charges $35 for a text-message plan with 250 text messages included. If the customer goes over the 250 messages, the cost is $0.14 per extra text message.A customer sent and received 329 text messages last month. What are the total charges? A company incurred the following costs related to research and development for the current year: salaries for research employees $ 500,000 developed technology purchased in a business acquisition 250,000 in-process r&d purchased in a business acquisition 150,000 supplies used in research projects 120,000 research performed for sale to another company in the future 80,000 for what amount should the company report research and development expense?. What are some current problems with the U.S constitution and what are the solutions? according to the textbook, at the time of the constitutional convention pure democracy was veiwed as a dangerous thing and the framers created a document that would curb the excesses of democracy. Suppose a Vestas 112-m wind turbine rated at 3.075 MW is installed at a site having Rayleigh wind statistics with an average wind speed of 8 m/s at the hub height. The cut-out speed VF is 25 m/s.Estimate the annual electricity generation.How many hours per year will the turbine be shutdown due to excessive winds