Cathode ray tubes (CRTs) used in old-style televisions have been replaced by modern LCD and LED screens. Part of the CRT included a set of accelerating plates separated by a distance of about 1.40 cm. If the potential difference across the plates was 23.0 kV, find the magnitude of the electric field (in V/m) in the region between the plates.

Answers

Answer 1

Answer:

E =  1.64 x 10⁶ V/m

Explanation:

The electric field in the region between the plates can be given by the following formula:

[tex]E = \frac{\Delta V}{d}[/tex]

where,

E = Electric Field = ?

ΔV = Poetential Difference across the plates = 23 KV = 23000 V

d = distance between plates = 1.4 cm = 0.014 m

Therefore, using these values in the equation, we get:

[tex]E = \frac{23000\ V}{0.014\ m}[/tex]

E =  1.64 x 10⁶ V/m


Related Questions

What is energy transfer in a car crash

Answers

Force energy- kinetic energy

Answer:

Kinetic and thermal

Explanation:

Kinetic because a moving car is transferring movement energy into the other one. Thermal because, in a car crash, the touching surfaces of both cars friction and that produces heat.

Roger drives his car at a constant speed of 80 km/hr. How far can he travel in 2 hrs. and 30 minutes?

Answers

Answer:

200 km/hr

Explanation:

Since he goes 80km per hour, multiply this by 2.5 or two and a half hours.

80 x 2.5 = 200 km/hr.

identify the types of motion in each activity.1.walking a long a hallway. 2.motion of the blades of the fan. 3.earths rotation 4.ball moving on the ground. 5.soldiers marching.​

Answers

Answer:

Explanatation

1 is just walking

2 spinging

3 roatating

4 rolling

5 stomping there feet

Those should be right but if im wrong then just someone eles the brainly

Which of the following would fill in the table where "A" is?
Symbol
Element Name
Atomic Number Mass Number
#nº
#p
#e
Net Charge
Si
Silicon
A (#13)
27
B (#14 14 C (#15)
0
D (#16)
Potassium
18
39
19
18 E (#17)
A. 3
B. 13
C. 14
D. 28

Answers

Answer:

.lyrjhg.

Explanation:

qqlqfgtjnfh

How does increasing the number of resistors in a parallel branch change the total resistance of the system?

Answers

As more and more resistors are added in parallel to a circuit, the equivalent resistance of the circuit decreases and the total current of the circuit increases. Adding more resistors in parallel is equivalent to providing more branches through which charge can flow.

Increasing the number of resistors in a parallel branch, decreases the total resistance of the system.

What is parallel branch?

Parallel resistive circuit is one where the resistors are connected to the same two points (or nodes) and is identified by the fact that it has more than one current path connected to a common voltage source.

As more and more resistors are added in parallel to a circuit, the equivalent resistance of the circuit decreases and the total current of the circuit increases.

To learn more about Parallel circuit here

https://brainly.com/question/11409042

#SPJ2

A marshmallow is fired from ground level with an initial speed of 41.5 m/s at an
angle of 33.5° above the horizontal. (a) Determine the maximum height reached
by the marshmallow. (b) Determine the horizontal range that the marshmallow
travels during its flight.

Answers

Look at picture first I couldn’t fit it all in but after you get the time get all the x values that you have and sub into s=ut+1/at^2

S=? t=2.34 a=0 u=41.5cos(33.5)
s= (41.5cos(33.5))(2.34)+1/2(0)
s=80.98 meters
this is the horizontal range

What happens during heat
transfer?
A. Heat always flows from cool to warm.
B. Heat always flows from warm to cool.
C. Heat always flows from warm to hot.

Answers

Answer:

B

Explanation:

What is a energy transformation when using a microwave to make popcorn?

Answers

Answer:

Radiation

Explanation:

Radiant energy

Explanation:

Radiant energy is transformed into thermal energy as the popcorn kernels absorb the microwaves. This causes the kernels to become hot and pop. Electric energy is transferred from the electrical outlet to the microwave.

Please help !!!!!!!!!!!!

Answers

Answer:

152 Volts

Explanation:

First, the Resistors are in series. So, the net resistance, R = 3 + 4 +3 + 4 +5

= 19 ohms

Using, V = IR;

V (the needed P.D) = 8 x 19 = 152 Volts

will be needed to successfully transport 8 amps of current round the circuit

Answer:

4q

Explanation:

wait nvm i dont know

Find the projection of vector vector A=2i-8j+k in the direction of vector B=3i-4j-12k

Answers

Use the dot product.
(a•b)=(2x3)+(-8x-4)+(1x-12)
=26

What is the equation for Hookes law ?

Answers

Answer:

Fs = -kx is the formula

Explanation:

Fs = spring force

k = spring constant

x = spring compression

Answer:

Equation of Hooks law

F=kx

Where,

F=Force applied

k= spring constant

x=extension of spring

Need help ASAP on number 4 pls

Answers

The Arrows on both sides that has equal length is wrong and the rest of the boxes are the correct

4. When scientists calculate the trajectory a satellite takes on its way to
study a planet, what do you think they use?
5 points
A Speed and velocity
B. Velocity and acceleration
O C. Speed, velocity, and acceleration
O D. Speed only

Answers

The answer is C and I know it because I had to answer it.

When scientists calculate the trajectory a satellite takes on its way to

study a planet, they use C. Speed, Velocity, and acceleration.

A trajectory, often known as a flight path, is the route taken by an object moving under the influence of gravity. Typically, the phrase is applied when referring to projectiles or satellites.  A parabola curve is usually a decent approximation of the trajectory form when an object is propelled for in a short distance.

When scientists calculate the trajectory a satellite takes on its way to

study a planet they take the speed, velocity, and acceleration into consideration.

The formula for calculating the trajectory can be expressed as:

[tex]\mathbf{y = h + xtan (\alpha) - \dfrac{gx^2 }{2V_o^2cos^2 (\alpha)}}[/tex]

where;

h = height show the distanceV = velocityg = acceleration due to gravity

Learn more about trajectory here:

https://brainly.com/question/88554?referrer=searchResults

Suppose a rocket in space is accelerating at 1.5 m/s2. If, at a later time, the rocket quadruples its thrust (i.e., net propelling force), what is the new acceleration?

Answers

Nshsjdjdjdjdjjdjehrbdbdbdbdbdvdydiejeje he’s he’s right

A child makes a ramp to push his toy dump truck up to his sandbox. If he uses 5 newtons of force to push the 12-newton truck up the ramp, what is the mechanical advantage of his ramp?

Answers

Answer:

m = 2.4

Explanation:

Given that,

Input force, [tex]F_i=5\ N[/tex]

Output force, [tex]F_o=12\ N[/tex]

We need to find the mechanical advantage of the ramp. The ratio of output force to the input force is equal to mechanical advantage. So,

[tex]m=\dfrac{12}{5}\\\\m=2.4[/tex]

So, the mechanical advantage of his ramp is 2.4.

What is the difference between the isotopes Hydrogen-2 and Hydrogen-3?

Answers

Answer:

They each have one single proton (Z = 1), but differ in the number of their neutrons. Hydrogen has no neutron, deuterium has one, and tritium has two neutrons. The isotopes of hydrogen have, respectively, mass numbers of one, two, and three.

Explanation:

A satellite, moving in an elliptical orbit, is 368 km above Earth's surface at its farthest point and 164 km above at its closest point. (a) Calculate the semimajor axis of the orbit. Incorrect: Your answer is incorrect. m (b) Calculate the eccentricity of the orbit. Incorrect: Your answer is incorrect. Did you find the semimajor axis a from the greatest and smallest radii

Answers

Answer:

a) 6636 km

b) 0.0154

Explanation:

The height above the earth at its furthest point is 368 km

The height above the earth at its closest point is 164 km

Radius of the Earth is 6370 km

The distance of the satellite from the center of the earth to the furthest point is 6370 + 368 km = 6738 km

The distance of the satellite from the center of the earth to the closest point is 6370 + 164 = 6534 km

If we add together the sum of the distance of the satellite from the furthest and its closest distance, it is equal to the 2 major semi axis.

Basically,

2a = R + r

a = (R + r) / 2

a = (6738 + 6534) / 2

a = 13272 / 2

a = 6636 km

Eccentricity, e = (a - r) / a

Eccentricity, e = (6636 - 6534) / 6636

Eccentricity, e = 102 / 6636

Eccentricity, e = 0.0154

A farmer plants the same crop in a field year after year. Every year there are months during which the field is left without any plants. The farmer notices a decline in soil
quality during these months. What causes this decrease in soil quality?
Erosion
Drought
Desertification
Consumption of nutrients by the crops

Answers

Answer:

Drought

Explanation:

Riders in an amusement park ride shaped like a Viking ship hung from a large pivot are rotated back and forth like a rigid pendulum. At each end of the swing the ship hangs motionless for a moment before the ship swings down under the influence of gravity. Assume that this motionless point occurs when the bar connecting the pivot point and the ship is horizontal.

Required:
a. Assuming negligible friction, find the speed of the riders at the bottom of its arc, given the system's center of mass travels in an arc having a radius of 14.0 m and the riders are near the center of mass.
b. What is the centripetal acceleration at the bottom of the arc?
c. Draw a free body diagram of the forces acting on a rider at the bottom of the arc.
d. Find the force exerted by the ride on a 60.0 kg rider and compare it to her weight.
e. Discuss whether the answer seems reasonable.

Answers

Answer:

a)  v = 16.57 m / s, b)  a = 19.6 m / s², d)    N = 1.76 10³ N,     N / W = 3

Explanation:

This exercise looks interesting, but I think you have some problem with the writing, the questions seem a bit disconnected from the initial text.

Let's answer the questions.

a) For this part we can use energy considerations.

Starting point. The upper part of the trajectory indicates that the arm is horizontally

          Em₀ = U = m g h

in this case h = r

Final point. For lower of the trajectory

          Em_f = K = ½ m v²

as they indicate that there is no friction

         Em₀ = em_f

         mgh = ½ m v²

         v = [tex]\sqrt{2gh}[/tex]

let's calculate

        v = [tex]\sqrt{2 \ 9.8 \ 14.0}[/tex]

         v = 16.57 m / s

b) the centripetal acceleration has the formula

           a = v² / r

           a = 16.57² / 14.0

           a = 19.6 m / s²

c) see attached where the diagram is

where N is the normal and w the weight

d) let's use Newton's second law

               N-W = m a

               N - mg = m ar

               N = m (g + a)

let's calculate

               N = 60.0 (9.8 + 19.6)

               N = 1.76 10³ N

the relationship with weight is

              N / W = 1.76 10³/( 60 9.8)

              N / W = 3

normal is three times greater than body weight

e) the answer is reasonable since by Newton's first law the body must continue in a straight line, therefore to change its trajectory a force must be applied to deflect it

How can a mutation result in a new trait

Answers

They are called beneficial mutations. They lead to new versions of proteins that help organisms adapt to changes in their environment. Beneficial mutations are essential for evolution to occur. They increase an organism's changes of surviving or reproducing, so they are likely to become more common over time.

Mutation is when there is a particular change in the bases of the DNA, this changes how enzymes and proteins work, and there may be a chance that this change will be helpful.

Joe is carrying a load of building supplies and likely injuring his back by supporting 882 in of weight. Calculate the mass of what he is carrying

Answers

Answer:

Answer is c because in exothermic reactions, energy releases.in cellular respiration,atp+h20 (water) = adp+ pi + energyso celullar respiration is exothermic and releases energy

Explanation:

Answer is c because in exothermic reactions, energy releases.in cellular respiration,atp+h20 (water) = adp+ pi + energyso celullar respiration is exothermic and releases energy

Part one: Multiple choices
1) A person sitting in the compartment of moving train is:
a) in the state of rest with respect to surroundings of the compartment,
b) in the state of motion with respect to surroundings of the compartment.
C) in the state of rest with respect to surroundings outside of the compartment
d)all of them

2) The motion of tuning fork prongs on vibration is:
a) Linear motion
b) periodic motion
c) circular motion
d) projectile motion
3) All the following are periodic motion except
a) moving car in straight line
b) Earth's rotation
c) pendulum
d) Swing
4) The rate of change of displacement is:
a) Acceleration
b) force
c) distance
d) velocity
5) When an object moves at negative acceleration in a straight line its:
a) displacement equals zero
b) velocity decrease
C) velocity increase
d) none of them
6) When the object speeds up its acceleration:
a) decreases
b) increases c) it has no acceleration d) All of them
7) The rate of change of velocity is:
a) force
b) variable velocity
c) instantaneous velocity
d) acceleration
8) If a train is moving in a straight line to cover a distance of 600 m in a minute its
velocity is:
a) 600 m/s
b) 60 m/s c) 100 m/s d) 480 m/s
9) The division between total displacement and total time is the:
a) variable velocity b) average velocity c) speed d) Instantaneous velocity
10) The rate of change of displacement at a given instant is called the
a) average velocity
b) instantaneous velocity
C) average velocity
d) instantaneous acceleration
11) A body completes one circular revolution in a roundabout whose diameter
140 m.
Find its displacement,
a) 439.6 m
b) 440 m
c) zero
d) 879.2 m​

Answers

Answer:

1)

a) in the state of rest with respect to surroundings of the compartment,

2)

b) periodic motion

3)

a) moving car in a straight line

4)

d) velocity

5)

b) velocity decrease

6)

b) increases

7)

d) acceleration

8)

10 m/s

9)

b) average velocity

10)

b) instantaneous velocity

11)

a) 439.6 m

Explanation:

1)

With respect to the inside surrounding the person will be at rest. Because the person is not moving inside the compartment.

2)

The vibration motion follows periodic motion.

3)

The car moving in a straight line is an example of rectilinear motion and its wheels are in rotational motion. They are not in periodic motion.

4)

Definition of velocity.

5)

Acceleration is the rate of change of velocity. So negative acceleration means a decrease in velocity.

6)

Acceleration is the rate of change of velocity. So an increase in velocity means an increase in acceleration.

7)

Definition of acceleration.

8)

[tex]velocity = \frac{Distance}{Time}\\\\velocty = \frac{600\ m}{1\ min}\frac{1\ min}{60\ s}\\\\velocity = 10\ m/s[/tex]

Hence, none of the options is correct. The correct answer is 10 m/s.

9)

Definition of average velocity.

10)

Definition of instantaneous velocity.

11)

[tex]Displacement = Circumference = \pi d\\Displacement = \pi(140\ m)\\Displacement = 439.6\ m[/tex]

A man whose mass is 69 kg and a woman whose mass is 52 kg sit at opposite ends of a canoe 5 m long, whose mass is 20 kg. Suppose that the man moves quickly to the center of the canoe and sits down there. How far does the canoe move in the water

Answers

Answer:

the canoe moved 1.2234 m in the water

Explanation:

Given that;

A man whose mass = 69 kg

A woman whose mass = 52 kg

at opposite ends of a canoe 5 m long, whose mass is 20 kg

now let;

x1 = position of the man

x2 = position of canoe

x3 = position of the woman

Now,

Centre of mass = [m1x1 + m2x2 + m3x3] / m1 + m2 + m3

= ( 69×0 ) + ( 52×5) + ( 20× 5/2) / 69 + 52 + 20

= (0 + 260 + 50 ) / ( 141 )

= 310 / 141

= 2.19858 m

Centre of mass is 2.19858 m

Now, New center of mass will be;

52 × 2.5 / ( 69 + 52 + 20 )

= 130 / 141

= 0.9219858 m  { away from the man }

To get how far, the canoe moved;

⇒ 2.5 + 0.9219858 - 2.19858

= 1.2234 m

Therefore, the canoe moved 1.2234 m in the water

The canoe move in the water will be 1.2234 m. The canoe move depending on the center of mass of the bodies.

What is the center of mass?

The center of mass of an item or set of objects is a place specified relative to it. It's the average location of all the system's components, weighted by their mass.

The centroid is the location of the center of mass for simple rigid objects with homogeneous density. The center of mass of a uniform disc shape, for example, would be at its center.

The given data in the problem is;

m₁ is the mass of man = 69 kg

m₂ is the mass of woman whose= 52 kg

m₃ is the mass  of  canoe =  20 kg

L is the length of canoe = 5 m

x₁ is the position of the man

x₂ is the position of the canoe

x₃ is the position of the woman

The center of mass will be;

[tex]\rm COM= \frac{[m_1x_1 + m_2x_2 + m_3x_3]}{ m1 + m2 + m3} \\\\ \rm COM= \frac{[69 \times 0 +52 \times 5 + 20 \times 2.5]}{ 69+ 52 + 20} \\\\ \rm COM= (0 + 260 + 50 ) / ( 141 )\\\\ \rm COM = 310 / 141 \\\\ \rm COM = 2.19858 m[/tex]

The new center of mass is;

[tex]\rm COM= \frac{52 \times 2.5 }{69+52+20} \\\\ \rm COM=\frac{130}{141} \\\\ \rm COM= 0.9219 m[/tex]

The distance to find how the canoe moved will be found by;

[tex]\rm x= 2.5+0.9219-2.1985 = 1.2234[/tex]

Hence the canoe move in the water will be 1.2234 m.

To learn more about the center of mass refer to the link;

https://brainly.com/question/8662931

a cat is being chased by a dog both are running in a straight line at constant speed. The cat has a headstart

Answers

The cat wins gsisndhisnsbdid disks subs

recall that a centripetal force is not a new type of force: it's a role that is taken by one of the four types of force that we already use. if we see an object moving in a curved path, we know that at least one of those forces is pointing inward, acting centripetally. describe at least one real-life example of an object moving in a curved path where its centripetal force is provided at least partially by each of the following types of forces: gravity, normal force, tension,

Answers

Answer:

Answer in explanation.

Explanation:

GRAVITY AS CENTRIPETAL FORCE:

When a satellite orbits around a planet, it is in a circular motion. In this scenario, the centripetal force is provided by the gravity force.

NORMAL FORCE AS CENTRIPETAL FORCE:

When a spacecraft is sent into space, it rotates about its own axis to create artificial gravity. During this rotating motion, the centripetal force is provided by the normal reaction (force) of the walls of the satellite.

TENSION AS CENTRIPETAL FORCE:

When a mass attached to a rope is swirled in a circular motion, the tension in rope acts as the centripetal force.  

In the figure, a 32 cm length of conducting
wire that is free to move is held in place
between two thin conducting wires. All of the
wires are in a magnetic field. When a 6.0 A
current is in the wire, as shown in the figure,
the wire segment moves upward at a constant
velocity.
The acceleration of gravity is 9.81 m/s?.
a) Assuming the wire slides without friction
on the two vertical conductors and has a mass
of 0.13 kg, find the magnitude of the minimum
magnetic field that is required to move the
wire.
Answer in units of T. b) What is the direction?

Answers

Answer:

.66354 T

Explanation:

Use F=ILB

B =  [tex]\frac{F}{IL}[/tex]

B = Magnetic field

F= force due to magnetic

I= current

L= length in meters

F = mg

Final formula:

B=[tex]\frac{mg}{IL}[/tex]

B=[tex]\frac{(.13)(9.8)}{(6)(.32)}[/tex]

B= .66354

ayo btw ion know how to find direction, my b G

The minimum magnetic field required to move the wire is 66354 T.

The direction of magnetic field is normal to the page outwards.

What is magnetic field?

The region surrounding a magnet that experiences the effects of magnetism is known as the magnetic field. When describing the distribution of the magnetic force within and around a magnetic object in nature, the magnetic field is a useful tool.

Given parameter:

Current passing through the wire, I = 6.0 A.

Length of the wire ,L = 32 cm = 0.32 m.

Mass of the wire, m = 0.13 Kg.

Acceleration due to the gravity, g = 9.8 m/s².

We know that, force acting on a current caring wire due to magnetic field is,  F=ILB

Where,

B = Required magnetic field.

To find the minimum magnetic field that is required to move the

wire, force acting on a current caring wire due to magnetic field is equal to weight the wire, that is, mg.

Hence, we can write,

mg = ILB

⇒ B = mg/IL

= (0.13 * 9.8)/(6.0 * 0.32)

=0.66354 Tesla

Hence, the minimum magnetic field is 0.66354 Tesla.

b) By using Maxwell's right hand thumb Rule along current flow, the direction of magnetic field is  determined as normal to the page pointing outwards.

Learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ2

how is a trench and a tsunami related? 6-8 sentences

Answers

Answer: A tsunami is a very long-wavelength wave of water that is generated by sudden displacement of the seafloor or disruption of any body of standing water.  Tsunami are sometimes called "seismic sea waves", although they can be generated by mechanisms other than earthquakes.  Tsunami have also been called "tidal waves", but this term should not be used because they are not in any way related to the tides of the Earth.  Because tsunami occur suddenly, often without warning, they are extremely dangerous to coastal communities. Ocean trenches are steep depressions in the deepest parts of the ocean [where old ocean crust from one tectonic plate is pushed beneath another plate, raising mountains, causing earthquakes, and forming volcanoes on the seafloor and on land.  

Explanation:

indicate the types of mechanical energy that are present in the following situation. a punk sliding along level ice and is slowing down.

a) Kinetic Energy
b) Potential Energy
c) Both
d) Neither​

Answers

Answer:

c

Explanation:

It contains both kinetic and potential energy.

It’s C because you need to have both kinetic and potential energy for this

SCIENCE
The growth of algae in ocean water is limited by their need for
a.
warm ocean currents.
b.
carbon dioxide and sunlight.
c.
dissolved oxygen.
d.
low salinity.

Answers

Answer:

c is trueeeeeeeeeeeeeee

The growth of algae in ocean water is limited by their need for dissolved oxygen. Thus, the correct answer is option C.

What is algae?

The term "algae" refers to a large and diverse group of photosynthetic eukaryotic organisms. It is a polyphyletic grouping of species from several distinct clades. Most are aquatic and autotrophic, lacking many of the distinct cell and tissue types found in land plants, such as stomata, xylem, and phloem.

Algae, like all organisms, normally grow in balance with their ecosystems, with the amount of nutrients in the water limiting their growth. Deep ocean water contains fewer algae because algae require sunlight and carbon dioxide to thrive.

Therefore, due to need for dissolved oxygen the growth of algae in ocean water is limited.

To learn more about algae, click here:

https://brainly.com/question/4289110

#SPJ6

how solar system believed to have been formed?​

Answers

Explanation:

Our solar system formed about 4.5 billion years ago from a dense cloud of interstellar gas and dust. The cloud collapsed, possibly due to the shockwave of a nearby exploding star, called a supernova. When this dust cloud collapsed, it formed a solar nebula—a spinning, swirling disk of material.

Other Questions
What is the final electron acceptor for photosynthesis?NADH0NADPHATP En un examen de matemticas por cada respuesta correcta se suman 7 puntos, y por cada incorrecta se pierden 9, si el examen tiene 10 preguntas, y se obtuvo una calificacin de 6 puntos, Cuntas preguntas correctas e incorrectas se obtuvieron? * Question 9 (1 point)(07.03 MC)What is the solution to the following equation? (1 point)8(2x - 10) + 18 = 4x + 22O 1) 40 253) 74) 8 A grocer wants to mix two kinds of coffee. One kind sells for $1.00 per pound, and the other sells for $2.55 per pound. He wants to mix a total of 28 pounds and sell it for $1.35 per pound. How many pounds of each kind should he use in the new mix? (Round off the answers to the nearest hundredth.) BRAINIEST ANSWER !!!! please help If a gene has a dominant and a recessive allele which one will show (which will be expressed)? Let f be differentiable such that f(-2)=3,f(3)=5, f'(-2)=4 and f'(3)=6. Let g be differentiable functions such that g(x)=f^-1 (x) for all x. What is the value of g'(3) Identify and define antioxidants, phytochemicals, and phytoestrogens. US_Diagram NOTaccurately draw(x + 1)cm(3 - x) cm(2x + 5) cmThe diagram shows a cuboid of volume V cm3(a) Show that V = 15 + 16x - x (squared) - 2x (cubed) The cost of a ticket to the fair on Sunday is $4 per adult and $2per child. The fair made $840 that day. The ticket office knows that they sold 300 tickets. How many adult tickets did they sell? what is the difference between mitosis and meiosis? helllp meee pls . ....... ..... . . . . . . . . . . . . . . .. . . . . ... .. . . . . ....... . . .. . . .. . . . . . . . . ... .. . . . .... plz help highly appreciated The Carter Corporation makes products A and B in a joint process from a single input, R. During a typical production run, 50,000 units of R yield 20,000 units of A and 30,000 units of B at the split-off point. Joint production costs total $90,000 per production run. The unit selling price for A is $4.00 and for B is $3.80 at the split-off point. However, B can be processed further at a total cost of $60,000 and then sold for $7.00 per unit. In a decision between selling B at the split-off point or processing B further, which of the following items is not relevant:a. $10,000) per production run b. $96,000 per production run c. ($42,000) per production run d. $36,000 per production run Express each decimal to fraction 106.28 Which statement describes an advantage of sexual reproduction? A compound has the empirical formula CH20 and agram-formula mass of 60. grams per mole. What is themolecular formula of this compound? Which cell replicates via meiosis?(1 point)sperm cellheart cellskin cellred blood cellthanks!! The Aluminum Association reports that the average American uses 56.8 pounds of aluminum in a year. A random sample of 50 households is monitored for one year to determine aluminum usage. If the population standard deviation of annual usage is 12.3 pounds, what is the probability that the sample mean will be each of the following? a. More than 59 pounds b. More than 56 pounds c. Between 56 and 57 pounds d. Less than 53 pounds e. Less than 49 pounds *Round the values of z to 2 decimal places. Round your answer to 4 decimal places, the tolerance is +/-0.0001. **Round the values of z to 2 decimal places. Round your answer to 4 decimal places. a. * b. * c. * d. * e. ** That feeling, that happiness When you realize you've fallen for someone, Flowers begin to thrive in your bosom You start to imagine the things You want to do with them But the flowers began to fade When the person, who matches your vibe Didn't listen to the audio with the feeling you sent them That's a terrible feeling ever Cause the things you imagined broke in the blink of an eye For fear of losing you the eyes used to flow like a river At night you don't want to think about them Do not want to conceive the beautiful sceneries with them anymore But this heart, who's gonna explain this to dummy heart That person was never yours and never will be We have to say goodbye to those sweet-sour feelings. Even if you don't want to. " If you see any error please let me know.