Answer:
f = 0.534×10⁻² Hz
Explanation:
Given data:
Frequency of wave= ?
Wavelength of wave = 5.62×10¹⁰ m
Solution:
Formula:
Speed of wave = wavelength × frequency
Speed of wave = 3×10¹⁷ nm/s
λ = 5.62×10¹⁰m×10⁹ nm/1 m = 5.62×10¹⁹ nm
Now we will put the values in formula.
3×10¹⁷ nm/s = 5.62×10¹⁹ nm × f
f = 3×10¹⁷ nm/s / 5.62×10¹⁹ nm
f = 0.534×10⁻² s⁻¹ or
f = 0.534×10⁻² Hz
How many electrons occupy a filled 7s sublevel
Answer:f has 14 electrons in 7 sublevel orbitals,d has 10 electrons in 5 sublevel orbitals,p has 6 electrons in 3 sublevel orbitals,s has 2 electrons in 1 sublevel orbital.
Explanation:
Answer:
14 i think
Explanation:
i googled it
Which step is part of a scientific investigation?
O designing a solution
O implementing the solution
O evaluating the solution
O communicating the findings
In which Colorado Rockies scenario was there more erosion? Why was there more erosion in the scenario?
Answer:
There was more erosion in the Colorado Rockies scenario where there was steady rain compared to the scenario in the same area where there was only a drizzle. There is more erosion because the steady rain increased the volume of the river more than the drizzle did. Because there was more water added to the river, the river flowed faster. The faster a river flows, the more sediments it transports or erodes.
Explanation:
Edge
There was greater erosion inside the Colorado Rockies situation when there was persistent rain.
What is erosion?Erosion is the loss of soil or rock from the Earth's crust's surface, as well as the movement of the removed material by natural forces (such as wind or water). The term "erosion" is used in its broadest sense to refer to the overall thinning and moulding of all landmasses on the surface of the planet, such as the corrosion of rock in its natural position, the vehicles and public of weathered material, as well as erosion brought on by wind action, marine, as well as glacial processes.
In contrast to the situation within the identical region where there was simply a drizzle, there was greater erosion inside the Colorado Rockies situation when there was persistent rain. Because the volume of a river was raised by the constant rain more than by the drizzle, there is more erosion. The river flowed more quickly as a result of the additional water. A river transfers or erodes more material the quicker it runs.
Therefore, there was greater erosion inside the Colorado Rockies situation when there was persistent rain.
To know more about erosion, here:
https://brainly.com/question/7567484
#SPJ2
1. Balance the reaction: Ag + H2S + O2 Ag2S + H2O
Help plz! Complete the following combustion reaction. Write your balanced equation two different
ways. (1 point)
C3H18 + O2 >
C3H18 + O2 >
Answer:
C₃H₈ + 5 O₂ ⇒ 3 CO₂ + 4 H₂O
2 C₃H₈ + 10 O₂ ⇒ 6 CO₂ + 8 H₂O
Explanation:
The combustion reaction is when propane reacts to oxygen to form a compound of carbon and water. If the product of carbon is carbon dioxide, the combustion is called complete. Let's considered the unbalanced combustion reaction.
(Note: I assume is C₃H₈, propane, because C₃H₁₈ doesn´t exist).
C₃H₈ + O₂ ⇒ CO₂ + H₂O
We will start balancing C and H that are just in 1 compound on each side, and finally we will balance O atoms. One way to do so is:
C₃H₈ + 5 O₂ ⇒ 3 CO₂ + 4 H₂O
We can get a different way of balancing the equation if we, for instance, multiply all the stoichiometric coefficients by 2.
2 C₃H₈ + 10 O₂ ⇒ 6 CO₂ + 8 H₂O
The ethyl acetate solution containing the mixture used in this experiment had a concentration of 20.0 g/L of benzoic acid. 1. Recovery of benzoic acid:
Answer:
The correct answer is "[tex]\frac{0.65}{V} \ percent[/tex]".
Explanation:
The given values are:
[tex]M_r=0.130 \ g[/tex]
[tex]M_o=20 \ g/L\times V(L)[/tex]
[tex]=20 \ V[/tex]
As we know,
⇒ [tex]Recovery \ percent=\frac{Amount \ of \ substance \ recovered}{Amount \ of \ substance \ originally \ taken}\times 100[/tex]
On substituting the given values, we get
[tex]=\frac{0.130}{20 \ V}\times 100[/tex]
[tex]=\frac{0.65}{V} \ percent[/tex]
Note: percent = %
15. Which compounds are reactants in the process of cellular respiration?
O H20 and CO2
O C6H120g and CO2
O H2O and Oz
ang
O C6H12Ogand 02
Answer: the correct answer would be the last option, C6H12O6 and O2
Explanation:
What mass of solute should you measure out in order to make 1,000 mL of a 0.3 M solution of magnesium phosphate Mg3(PO4)2?
Hey there !
Molecular Weight: 262.86 g/mol
Volume in liters : 1,000 mL => 1,000 / 1000 => 1 L
Number of moles of solution :
number of moles = volume x molarity
number of moles = 1 x 0.3 => 0.3 moles
Therefore:
1 mole Mg₃(PO₄)₂ ------------------- 262.86 g
0.3 moles ----------------------------- mass of Mg₃(PO₄)₂ ??
mass of Mg₃(PO₄)₂ = 0.3 x 262.86 / 1
mass of Mg(PO₄)₂ => 78.858 g
Hope this helps!
What color do you get if you mix red and blue light?
Red and Green?
Blue and green?
What relationship do you find between frequency and energy?
What relationship do you find between wavelength and current flow?
What relationship do you find between light intensity and current flow?
Answer:
Purple light.
Yellow light.
Explanation:
which of the following is a true for subtropical jet streams
Answer: how do we answer when there are no options??
Explanation:
Is it A, B, C, or D?????
please help!!!!
Answer:
d
Explanation:
Answer:
Its d
Explanation:
Ik you already know this, I just wanted the points tbh
A nuclear power plant is scheduled to undergo a retrofitting. What is the most likely outcome of the change?
The power plant will no longer generate radioactive wastes.
The power plant will recycle the water it uses to cool the reactor.
The power plant will be able to reprocess its used uranium fuel.
The power plant will switch from fission reactions to fusion reactions.
Answer:
It's B
Explanation:
I got it right on edjenuity
The most likely outcome of the retrofitting of a nuclear power plant is that it will be able to reprocess its used uranium fuel. Therefore, option C is correct.
What is nuclear power plant?A nuclear power plant is a facility that generates electricity by harnessing the heat produced by nuclear reactions. At the heart of a nuclear power plant is the reactor, where a controlled chain reaction of nuclear fission occurs.
Reprocessing is a process by which the used nuclear fuel is chemically treated to separate out and recover the unused uranium and plutonium, which can then be reused as fuel. This reduces the amount of radioactive waste produced by the plant and also extends the life of the uranium fuel.
The fission reactions to fusion reactions is not currently a viable option for power generation, and the idea that a retrofitting would eliminate radioactive wastes is unlikely, as nuclear power plants will always produce some amount of radioactive waste.
Thus, option C is correct.
To learn more about the nuclear power plant, follow the link:
https://brainly.com/question/4246037
#SPJ3
what mass of calcium chloride will be produced from 3.750 moles of hcl reacting with ca(oh)2
Answer:
208.125g
Explanation:
Given parameters:
Number of moles of HCl = 3.75moles
Unknown:
Mass of CaCl₂ that will be produced = ?
Solution:
The reaction equation is given as:
2HCl + Ca(OH)₂ → CaCl₂ + 2H₂O
Now, to find the mass of CaCl₂, we have to work from the known to the unknown.
The known specie here is the number of moles of HCl;
2 mole of HCl will produce 1 mole of CaCl₂
3.75moles of HCl will produce [tex]\frac{3.75}{2}[/tex] = 1.875moles
The mass of CaCl₂;
Mass of CaCl₂ = number of moles of CaCl₂ x molar mass
Molar mass of CaCl₂ = 40 + 2(35.5) = 111g/mol
Mass of CaCl₂ = 1.875 x 111 = 208.125g
What products will most likely form when a carboxylic acid reacts with an amine at high temperatures, or in the presence of a catalyst
Answer:
An amide and water are the products formed
Explanation:
Here, we want to know the possible products that could be formed from the reaction of a carboxylic acid with an amine.
An anime has the functional group NH2 while for an organic acids, we have COOH.
So essentially we want to know the result of these two functional groups coming together to react.
The reaction between these two will form an amide in conjunction with water.
Take for example;
R-COOH + R’-NH2 ———> R-COHN -R’ + H2O
Where R and R’ may be the same or different alkyl or aryl groups
A resistor is placed in a circuit. The voltage of the circuit is changed and the current is measured. The graph seen here shows the data that was collected. Determine the resistance of the resistor in this circuit.
The process through which professional scientists evaluate the quality of each other’s research is called
group counsel.
group review.
peer counsel.
peer review.
Answer:
peer reveiw
Explanation:
Answer:
Peer review.
Explanation: Ask Edu
How much heat would be required to convert 5.31 mol of a pure substance from a liquid at 40.0°C to a gas at 113.0°C?
Answer:
Q = 7.7 KJ
Explanation:
The complete question carries the following data:
Specific Heat Capacity of Liquid State = C(l) = 1.45 J/mol.°C
Specific Heat Capacity of Gaseous State = C(g) = 0.65 J/mol.°C
Boiling Temperature = Tb = 88.5°C
Heat of Vaporization = ΔH(vap) = 1.23 KJ/mol
Now, first we calculate the heat required (Q₁) to raise he temperature to boiling point:
Q₁ = n*C(l)*ΔT₁
where,
n = no. of moles = 5.31 mol
ΔT₁ = Temperature difference from 40°C to Tb = 88.5°C - 40°C = 48.5°C
Therefore,
Q₁ = (5.31 mol)(1.45 J/mol.°C)(48.5°C)
Q₁ = 373.4 J = 0.37 KJ
Now, we calculate the heat required (Q₂) to change its phase:
Q₂ = nΔH(vap)
Q₂ = (5.31 mol)(1.23 KJ/mol)
Q₂ = 6.53 KJ
Now, we calculate the heat required (Q₃) to raise he temperature to boiling point:
Q₃ = n*C(g)*ΔT₃
where,
n = no. of moles = 5.31 mol
ΔT₃ = Temperature difference from Tb to 113°C = 113°C - 88.5°C = 24.5°C
Therefore,
Q₃ = (5.31 mol)(0.65 J/mol.°C)(24.5°C)
Q₃ = 84.5 J = 0.08 KJ
So, the total heat required to convert 5.31 mol of this pure substance from a liquid at 40°C to a gas at 113°C is:
Q = Q₁ + Q₂ + Q₃
Q = 0.37 KJ + 6.53 KJ + 0.08 KJ
Q = 7.7 KJ
The total heat required to convert the pure substance from liquid to gas at the given temperature is 814 J.
The given parameters;
molar heat capacity of liquid, C(l) = 1.45 J/mol.⁰Cmolar heat capacity of gas, C(g) = 0.65 J/mol.⁰CThe total heat required to convert the pure substance from liquid to gas at the given temperature is calculated as follows;
[tex]Q = nc_l \Delta \theta + nc_g \Delta \theta \\\\ \Delta \theta = (113 - 40) = 73^0 C \\\\Q = (5.31 \ mol \times 1.45 \frac{J}{mol .\ ^0C} \times 73\ ^0C) + (5.31 \ mol \times 0.65 \frac{J}{mol .\ ^0C} \times 73 \ ^0C)\\\\Q = 814 \ J[/tex]
Thus, the total heat required to convert the pure substance from liquid to gas at the given temperature is 814 J.
"Your question is not complete, it seems to be missing the following information;"
How much heat would be required to convert 5.31 mol of a pure substance from a liquid at 40.0°C to a gas at 113.0°C? (molar heat capacity of liquid, C(l) is 1.45 J/mol.⁰C and molar heat capacity of gas, C(g) is 0.65 J/mol.⁰C).
Learn more here:https://brainly.com/question/8428922
.
Gross production is the amount of energy left after cellular respiration.
SESE
Please select the best answer from the choices provided
True or false
Answer:
False did the test on egde
every spring has an equilibrium position which statement describe a spring at it equilibruim position?
What's the molar mass of CoCl
Answer:129.839 g/mol
Explanation:
Please help
It’s super quick
Answer:
1. a
Explanation:
2. c
Answer:
1 is A number two is C
What are some foods that bacteria helps in the production of?
Answer:
yeasts, moulds, bread, beer, wine, ...
Explanation:
which chemical equation follows the law of conservation of mass
Answer:
the law of conversation of mass States that mass is an isolated system is neither created or destroyed by chemical reactions or physical transformations. according to the law of conversation of mass the mass of the product in a chemical reaction must equal to the mass of reactants
hope It helped you
What number should be placed in front of HCl to
balance this chemical equation?
Zn + __HCI - ZnCl2 + H2
Answer:
it should be 2
Explanation:
Read this excerpt from the beginning Through the Looking Glass of by Lewis Carroll. "Kitty, can you play chess? Now, don't smile, my dear, I'm asking it seriously. Because, when we were playing just now, you watched just as if you understood it: and when I said ‘Check!’ you purred! Well, it WAS a nice check, Kitty, and really I might have won, if it hadn't been for that nasty Knight, that came wiggling down among my pieces.” What can readers predict about Alice? She will have an active imagination. She will be a serious young girl. She will be a competitive chess player. She will have difficulties getting along with others.
Answer:
She will have an active imagination.
Explanation:
I took the test and i got 90%
But this one is right, hope this helps ( :
Answer:
a
Explanation:
give the person above me brainlest :)
A muffin has a mass of 100g and a volume of 500cm3. What the density of the muffin? Show all work
Answer:
The density of muffin is 0.2 g/ cm³.
Explanation:
Given data:
Mass of muffin = 100 g
Volume of muffin = 500 cm³
Density of muffin = ?
Solution:
Density is equal to the mass of an object divided by its volume.
Formula:
d = m/v
Now we will put the values in formula.
d = 100 g/ 500 cm³
d = 0.2 g/ cm³
The density of muffin is 0.2 g/ cm³.
which two geologic events occur very slowly as a result of tectonic forces and movement.
A. Destruction of forests
B. Seafloor spreading
C. Glacier formation
D. Mountain range formation
PLZZ HELPP!!!
Answer:
mountain range formation, and seafloor spreading
Explanation:
I TOOK THE TEST!!
and it was right
PLS help!!!!!!!!
Why are halogen atoms never a central atom?
Answer:
They can’t have more than 8 valence electrons.
Explanation:
Which pattern on the periodic table is correctly predicted below?
Groups determine the number of valance electrons and periods determine the number of energy levels
Groups determine the number of energy levels and periods determine the number of valence electrons
Groups determine the number of protons, and periods determine energy levels
Groups determine the number of neutrons, and periods determine valence
Plzz
plzzzzz Plzzz Wil givr brainleast which type of weathering causes the mineral composition of rocks to change
Answer:
Chemical
Explanation:
Cause it is