Calculate the concentration, in units of dm-3, of sulfuric acid, H2SO4, which has a solubility of 2 mol dm-3. [Relative atomic mass: H = 1, O = 16, S = 32]​

Answer:

the answer is Energy will be exchanged, but matter will not be exchanged.

this because that in a closed system energy is able to be transfered but matter cant.

hope this helps

Answer:

b

Explanation:

none

The correct answer is C. Climate change

Explanation:

Long-term environmental changes occur as major events affect the environment and ecosystems indefinitely. These events differ from short-term environmental changes because the effect of short-term environmental changes is mainly temporary. Also, long-term changes are usually gradual.

Climate change is an example of long-term environmental changes because this implies indefinite and major changes in weather patterns and ecosystems. For example, it is believed climate change will decrease the amount of ice in Earth, change sea level, and lead to the extinction of dozens of species. This does not occur with events such as el niño or a small asteroid impact that affect the environment for a short time and do not imply major changes.

Answer:

it is c) climate change

Explanation:

i just took the quiz

hope this helps!!!   :D

Answer:B. A liquid changes to a solid.

Explanation:

A Liquid changes to solid when pressure

increases from 1 atm to 10 atm at -40°C

So, given at -40°C

CO2 will be in liquid state and as per the concept explained above by increasing the pressure on liquid we get the solid state

Thus , With CO2 a liquid phase change to a solid

phase when pressure increases 1 atm to 10atm at -40°C

Learn more about phase diagram here

https://brainly.com/question/1612862

#SPJ2

Answer:

20.76 L OF CO2 WILL BE PRODUCED BY 45 G OF METHANE.

Explanation:

Equation of the reaction:

CH4 + 02 --------> CO2 + 2H20

Molar mass of methane = ( 12+ 1*4) g/mol = 16 g/mol

Calculate the number of moles present in 45 g of methane

1 mole of methane = 16 g / mol of methane

(45 / 16) mole of methane = 45 g of methane

= 2.8125 moles

Using the ideal gas equation:

PV = nRT

P = 1 atm

n = 2.812 moles

T = 90 C

R = 0.082 L atm/ mol C

V = unknown

So we have:

V = nRT / P

V = 2.8125 * 0.082 * 90 / 1

V = 20.756 L

In the production of CO2 by 45 g of methane, 20.756 L of methane was used.

Then, the volume of CO2 produced by this volume will be 20.756 L since 1 mole of methane produces 1 mole of CO2.

In other words;

1 mole of CH4 = 1 mole of CO2

22.4 dm3 of CH4 = 22.4 dm3 of CO2

20.76 DM3 = 20.76 dm3

The volume of CO2 produced will therefore be 20.76 L

Answer:

I believe its the 4th one. He goes to give Romeo the message but before he is able to, Balthasar tells Romeo that Juliet is dead. Friar John just wasn't there in time.

Answer:

D) he fails to give Romeo an important letter

Explanation:

i took the test. edge 2020

Heterogeneous 'mixtures' (because they don't meet the definition  of mixtures) are mixtures substances that aren't completely uniformly spread out. They haven't reacted with the solvent to become a solution.

Explanation: There are 2 types of heterogeneous solutions, A Colloid and a suspension.

Colloid: You can check if a mixture is heterogeneous by passing a light ray through it. This may cause the Tyndall effect (If the mixture is a colloid) when the Colloidal Heterogeneous mixture's particles are so small that they refract the beam of light and the path of light will be visible, like if you add 3 drops of milk in a glass of Water and shine a laser light through it. This is because the particles are too small to be seen by the unaided eye but big enough to scatter you laser light. However that particles won't settle down or will be separated by a filter paper due to particles' small size.

Suspension: A solution will be a solution when the particles of the Mixture is big enough to be seen by the unaided eye. Like if you mix sand and Water, the sand will eventually settle down due to Gravity. The mixture's solute will be big enough to pass through a filter paper.

Answer:

2.01 A

Explanation:

Para esta pregunta debemos empezar por la semi-reaccion del plomo:

[tex]Pb^+^2~_(_a_q_)~+~2e^-~->~Pb_(_s_)[/tex]

Se intercambian dos electrones en la semi-reacción del plomo. Si tenemos en cuenta la ecuación:

[tex]n=\frac{I*t}{z*F}[/tex]

Donde:

n= Moles depositados

I= Intensidad de corriente (en Amperios)

z= Numero de electrones intercambiados

F= Constante de faraday = 96484 C/mol

t=tiempo (en segundos)

Que conocemos de esta ecuación?

Los moles (se pueden calcular a partir de la masa atómica del plomo, 207.2 g/mol)

[tex]2.6~g~Pb\frac{1~mol~Pb}{207.2~g~Pb}=0.0125~mol~Pb[/tex]

El tiempo (hay que convertirlo a segundos):

[tex]20~min\frac{60~s}{1~min}=1200~s[/tex]

Z (Numero de electrones)

De acuerdo a la semi-reacción son intercambiados 2 electrones.

Por lo tanto podemos resolver para "I":

[tex]I=\frac{n*z*F}{t}=\frac{0.0125~mol*2*96484\frac{C}{mol}}{1200~s}[/tex]

[tex]I~=~2.01~\frac{C}{s}=2.01~A[/tex]

Espero que sea de ayuda!

Answer:

because your parents carry the recessice gene or they are blond

Explanation:

it could also be ffrom a mutation or just because you dyed your hair

The mole is used to measure small particles like atoms and molecules.  The 4 moles of silver is equivalent to [tex]\bold{2.408 x 10^2^4 }[/tex] atoms.

Given here,

The number of atoms

[tex]\bold{2.408 x 10^2^4 }[/tex]

Number of moles = ?

1 mol of substance = [tex]\bold{ 6.02 x10^2^3}[/tex]

Hence,

moles of silver,

[tex]\bold {= \dfrac {2.408 x 10^2^4 } { 6.02 x10^2^3} }}\\\\\bold {= 4 mol}[/tex]

Therefore, the 4 moles of silver is equivalent to [tex]\bold{2.408 x 10^2^4 }[/tex] atoms.

To know more about mole concept, refer to the link:

https://brainly.com/question/20483253

Answer:

Uses of Functional Groups Involving Oxygen

Explanation:

From the table given above, we obtained the following:

1. The functional group of each compound contains oxygen.

2. The table shows the uses of each compound.

From the observations made above, we can say that the most appropriate title for the table is:

Uses of Functional Groups Involving Oxygen.

Answer:

Explanation:

first guy is right give him brainliest

Answer:

mass = 0.00000043189g

Answer:

Yes.

Explanation:

Only an acidic compound and then a basic compound react(neutralization reaction) to give a salt.

Acid+Base=Salt+Water.

Hope this helps❤❤❤

Yes, we always have to begin with two compounds in a neutralization reaction.

A neutralization reaction can be defined as a chemical reaction in which an acid and base quantitatively react together to form salt and water as products.

When an acid and a base react, the reaction is called a neutralization reaction. That's because the reaction produces neutral products. Water is always one product, and salt is also produced. Salt is a neutral ionic compound.

Yes, we always have to begin with two compounds in a neutralization reaction.

Learn more about neutralization reaction here:

https://brainly.com/question/20038776

#SPJ2

Answer:

C. The tea cools to room temperature, the ice cream melts and warms to room temperature.

Explanation:

The tea's temperature was higher than room temperature. The ice cream's temperature was lower than room temperature. After some time, both items will become room temperature, which results in cooling and melting.

Canthomythisphere

Hope this answer looks right.......

Mark it as brainliest if u want or delete it.......

Or I can like. Give a thanks or give a rating.......

Hope it helps u with wat u r doing.........

Answer:

2 moles

Explanation:

Answer:

Carbon has 4 electrons in its outermost shell. ... Therefore, carbon completes its octet by sharing its 4 electrons with other carbon atoms or with atoms of other elements and forms covalent bond. It forms strong covalent bonds because of its small size.

Explanation:

Answer: I wanna say D because pangea was tectonic plates that moved and reshaped the earth

Explanation:

I hope that helps

Answer

D on edge

Explanation:

Answer:

i think it will "Equal to 75 Kg"

Explanation:

object/person remains same, his mass is somewhere, so it would remain same everywhere. Only Weight of a person changes with gravity

hope i helped

-lvr

Answer:

Relative volume of ether to water that should be used for the extraction = 1.205

Explanation:

The extraction/distribution coefficient of an arbitrary solvent to water for a given substance is expressed as the mass concentration of the substance in the arbitrary solvent (C₁) divided by the mass concentration of the substance in water (C₂).

K = (C₁/C₂)

Let the initial mass of the organic substance X in water be 1 g (it could be any mass basically, it is just to select a right basis, since we are basically working with percentages here).

If 94% of the organic substance X is extracted by ether in a single extraction, 0.94 g ends up in ether and 0.06 g of the organic substance X that remains in water.

Let the volume of ether required be x mL.

Let the volume of water required be y mL.

Relative volume of ether to water that should be used for the extraction = (x/y)

Mass concentration of the organic substance X in ether = (0.94/x)

Mass concentration of organic substance X in water = (0.06/y)

The distribution coefficient , Ko (Cether / C water), for an organic substance X at room temperature is 13.

13 = (0.94/x) ÷ (0.06/y)

13 = (0.94/x) × (y/0.06)

13 = (15.667y/x)

(x/y) = (15.667/13) = 1.205

Hope this Helps!!!

Answer:

Chemical potential energy is the energy stored in the chemical bonds of a substance.

Explanation:

Answer:

There are [tex]1.202\times 10^{24}[/tex] atoms and [tex]1.502\times 10^{23}[/tex] molecules in the compound.

Explanation:

The molar mass of the sulphur is [tex]32.065\,\frac{g}{mol}[/tex]. The Avogradro's Law states that exists [tex]6.022\times 10^{23}\,\frac{atom}{mol}[/tex]. The quantity of atoms in a quantity of mass is derived from dividing the mass by the molar mass and multiplying it by the Avogadro's Number. That is:

[tex]n_{atom} = m_{S}\cdot \frac{n_{A}}{M_{S}}[/tex]

Where:

[tex]m_{S}[/tex] - Mass of the sample, measured in grams.

[tex]n_{A}[/tex] - Avogadro's Number, measured in atoms per mole.

[tex]M_{S}[/tex] - Molar mass of the sulphur, measured in grams per mole.

If [tex]m_{S} = 64\,g[/tex], [tex]n_{A} = 6.022\times 10^{23}\,\frac{atoms}{mol}[/tex] and [tex]M_{S} = 32.065\,\frac{g}{mol}[/tex], then:

[tex]n_{atom} = (64\,g)\cdot \left(\frac{6.022\times 10^{23}\,\frac{atoms}{mol} }{32.065\,\frac{g}{mol} }\right)[/tex]

[tex]n_{atom} = 1.202\times 10^{24}\,atoms[/tex]

There are [tex]1.202\times 10^{24}[/tex] atoms in the compound.

Now, the molecular weight of the compound is:

[tex]M_{S_{8}} = 8\cdot \left(32.065\,\frac{g}{mol} \right)[/tex]

[tex]M_{S_{8}} = 256.52\,\frac{g}{mol}[/tex]

The quantity of molecules in a quantity of mass is derived from dividing the mass by the molecular weight and multiplying it by the Avogadro's Number. That is:

[tex]n_{molecule} = m_{S_{8}}\cdot \frac{n_{A}}{M_{S_{8}}}[/tex]

Where:

[tex]m_{S_{8}}[/tex] - Mass of the sample, measured in grams.

[tex]n_{A}[/tex] - Avogadro's Number, measured in atoms per mole.

[tex]M_{S_{8}}[/tex] - Molecular weight of the compound (octosulphur), measured in grams per mole.

If [tex]m_{S_{8}} = 64\,g[/tex], [tex]n_{A} = 6.022\times 10^{23}\,\frac{molecules}{mol}[/tex] and [tex]M_{S_{8}} = 256.52\,\frac{g}{mol}[/tex], then:

[tex]n_{molecule} = (64\,g)\cdot \left(\frac{6.022\times 10^{23}\,\frac{molecules}{mol} }{256.52\,\frac{g}{mol} }\right)[/tex]

[tex]n_{molecule} = 1.502\times 10^{23}\,molecules[/tex]

There are [tex]1.502\times 10^{23}[/tex] molecules in the compound.

Answer:

The answer to the question is explained below

Explanation:

A chemical is any substance or an element that can occur naturally or can be created artificially. Chemicals are found in many places like the soil, water, air. They can be found solely as an element without being combined with other elements, and they can also be found as a mixture in compounds.

Exposure to chemicals can be made possible through direct contact with the eye, broken skin. It can also be possible through Inhalation of gases, also through the mouth.

Long-term effects occur when an individual has been exposed to harmful chemicals over a long period of time, with the effect often fatal. Long-term exposure to chemicals include:

1. The weakening of the immune system

2. can cause cancer. For example, Carcinogens that cause cancer in humans, are gotten from exposures to Carbon Tetrachloride, Chloroform.

3. It can cause brain damage

4. It can lead to reproductive disorders

5. It can lead to eye damage, skin problems, and respiratory problems

Short-term effects occur when an individual has been exposed to harmful chemicals accidentally, or within a short period of time. As such, depending on the type of chemical, the amount the individual is exposed to, the effect is usually less fatal and can be addressed. Short-term exposure to chemicals include:

1. Skin or eye irritation

2. Headache

3. Nausea

4. Cough

5. Dizziness

6. Physical injuries

Answer:

267.14 iron oxide.

Explanation:

Given that

[tex]Fe_2O_3+3CO = 2Fe+3CO_2[/tex]

We know that molecular mass of iron-oxide = 160 g/mole.

We know that molecular mass of iron = 56 g/mole.

From the above reaction we can say that

1 mole of iron -oxide produce 2 mole of iron

160 gm of iron oxide produce 112 gm of iron

So

1 gm of iron required [tex]\dfrac{160}{112}=1.42 gm[/tex] of iron oxide

Therefore

187 gm of iron required [tex]1.42\times = 187 = 267.14\ gm[/tex] of iron oxide.

Therefore 187 gm of iron required 267.14 iron oxide.

Answer: 267.14

Explanation:

Answer:

the molarity of cobalt(II) fluoride in the resulting solution is = 0.137  M

Explanation:

Given that :

a student dissolves 6.64 g of CoF₂  into 500 mL of water

volume of the solution(water) = 500 mL = 0.50 L

The standard  molar mass of CoF₂ is 96.93 g/mol

number of moles of CoF₂ = mass of CoF₂/molar mass of CoF₂

number of moles of CoF₂ = 6.64 g/96.93 g/mol

number of moles of CoF₂ = 0.0685 mol

The molarity of any given substance is known to be as the number of moles of solute dissolved in one litre of solution.

Thus ;

Molarity of  cobalt(II) fluoride CoF₂ in the resulting solution is = number of moles / Volume in (L)

Molarity of  cobalt(II) fluoride CoF₂  = 0.0685 mol/ 0.50 L

= 0.137  M

Thus ; the molarity of cobalt(II) fluoride in the resulting solution is = 0.137  M

Answer:

Temperature is not a chemical change because when a substance changes in temperature, its chemical makeup is not changing.

Answer:

Magnesium oxide = MgO

Iron = Fe

Iron (III) Oxide = Fe₂O₃

Magnesium = Mg

Skeleton equation = MgO + Fe ⇒ Fe₂O₃ + Mg

Answer:

Ramsey and Marshall method.

Explanation:

The specific latent heat of vapourization of a liquid is measured by a modification of the method of Ramsey and Marshall in the year 1896.

Answer:

It’s D

Explanation:

Answer:

D Rocks change from one type to another in a specific order.

Explanation: