Calculate the average speed between 0 s and 20 s

Answer:

(C) no change in the temperature of the gas.

Explanation:

isothermal process of a gas, can result to compression of the gas or expansion of the gas at a constant temperature (ΔT = 0).

For isothermal gas expansion, work is done in reducing the pressure of the gas by increasing its volume at a constant temperature. The change in the internal energy of this process is zero (ΔU = 0).

For isothermal gas compression, work is done in decreasing the volume of the gas by increasing its pressure at a constant temperature. The change in the internal energy of this process is also zero (ΔU = 0).

Therefore, when a gas undergoes an isothermal process, there is no change in the temperature of the gas.

Answer: true

Explanation: a force can be anything that effects an object, as long as the object moves

Answer:

Explanation:

Given

Horizontal velocity = 9.00m/s

time taken = 0.550 s

Required

How far does the projectile fall in the vertical direction

Using the formula for finding the maximum height of the projectile

H = U²sin²θ/2g where;

U = 9.00m/s

θ = 90° (object launched in the vertical direction)

g = 9.81m/s²

Substituting the given parameters into the formula;

H = 9²sin²90/2(9.81)

H = 81(1)/19.62

H = 81/19.62

H = 4.128 m

H ≈ 4.13m

Hence the distance that the projectile fall in the vertical direction is 4.13m

Answer:

f = 25 Hz

Explanation:

We know that :

[tex]v = f*d\\=> f = \frac{v}{d}[/tex]  where f = frequency ; v = speed & d = wavelength

Here in the question ,

Speed = 2500 m/s

Wavelength = 100 m

Using the above formula ,

Frequency = [tex]\frac{2500}{100} = 25 Hz[/tex]

Explanation:

a= v/t

v= at

= 20m/s2 × 1sec

= 20m/s

Answer:

Explanation:

Let the internal resistance be r .

Since in open circuit the volt is 1.55 V , this will be the source voltage .

Source voltage = 1.55

If external resistance be R .

1.55 / (R + r ) = .500

R + r = 3.1 ohm

So sum of internal resistance and external resistance will be 3.1 ohm.

The correct answer is B. Electrons emit and absorb energy based on their position around the nucleus.

Explanation:

In general, an atom's emission of photons (light) is the result of electrons, which are the negative charge particles that orbit the nucleus. Moreover, the emission of light is likely to occur if the electron is located at a specific energy level (position in the atom) and it moves to a lower level as this requires the loss of energy in the form of photons. Also, the electron can absorb the photons and as a result gain enough energy to move to a higher level. This implies the atom's emissions of light shows the relationship between electrons emitting and absorbing energy and their position or energy level.

Answer:

The correct answer is B. Electrons emit and absorb energy based on their position around the nucleus.

On edge :)

Explanation:

The three ways a car can accelerate are change in velocity, change in direction, or both.

The rate of velocity change concerning time is known as acceleration. The acceleration of the object is;

[tex]\rm a = \frac{v-u}{t}[/tex]

Here,

a is the acceleration

v is the final velocity

u is the initial velocity

t is the period

The three ways a car can accelerate are as follows;

a)Change in velocity.

b)Change in direction

c)Change in both velocity and direction.

Hence, the three ways a car can accelerate are change in velocity, change in direction, or both.

Learn more about acceleration, here:

https://brainly.com/question/2437624

#SPJ2

Answer:

inertia

Explanation:

Answer:

The work to be done is 638,761.12 J

Explanation:

Given;

mass of the car, m = 1150 kg

velocity of the car, v = 120 km/h = 33.33 m/s

Apply work energy theorem;

W = K.E

where;

W is the work done

K.E is the kinetic energy

W = ¹/₂mv²

W =  ¹/₂ (1150)(33.33)²

W = 638,761.12 J

Therefore, the work to be done is 638,761.12 J

Answer:

[tex]a=0.08\ m/s^2[/tex]

Explanation:

Given that,

Mass of a box, m = 18 kg

It is pushed with a force of 250 N

The coefficient of friction is 0.8

We need to find the acceleration of the box.

Normal force acting on the box,

N = mg

M = 18 × 10

N = 180 N

The force acting on the force in terms of coefficient of friction is given by :

[tex]F=\mu mg\\\\\text{or}\\\\ ma=\mu mg\\\\a=\dfrac{\mu }{g}\\\\a=\dfrac{0.8}{10}\\\\a=0.08\ m/s^2[/tex]

So, the acceleration of the box is [tex]0.08\ m/s^2[/tex]

diagonal line means the velocity is constant.

Answer:

Explanation:

step one:

simply put average speed is defined as the total distance travelled divided by the total time taken.

step two:

given data

total distance is the distance from where she started to the store

which is 100 m

also, we are told that the total time taken is 250 seconds

step three:

Hence we can compute the average speed as

average speed= 100/250

average speed= 0.4 m/s  

Answer:

It depends on how you use the spoon...

if you are keeping one end of the spoon and pressing other end, the force you provide is supported by the force due to gravity... Hence it is easy to open this way :)

F + G ... Where F is the force you provide and G is the force due to gravity.

Answer:

a

      [tex]t  =  3.33 \  ns[/tex]

b

i      [tex]D_w  =0.75 \  m [/tex]

ii     [tex]D_g  =0.67 \  m [/tex]

iii     [tex]D_c  =0.46 \  m [/tex]

Explanation:

Generally the time taken to travel 1 m in a vacuum is mathematically represented as

       [tex]t  =  \frac{1}{c}[/tex]

Here c is the speed of light with value  [tex]c =  3.0*10^{8} \  m/s[/tex]

So  

          [tex]t  =  \frac{1}{3.0*10^{8}}[/tex]

          [tex]t  =  3.33*10^{-9} \  s[/tex]

         [tex]t  =  3.33 \  ns[/tex]

The distance light travels in water is mathematically represented as

         [tex]D_w  = \frac{c}{n_w}  *  t[/tex]

Here n_w  is the refractive index of  water with value 1.333

So

      [tex]D_w  = \frac{3.0*10^{8}}{1.333}  *  3.33*10^{-9}[/tex]

     [tex]D_w  =0.75 \  m [/tex]

The distance light travels in glass is mathematically represented as

       [tex]D_g  = \frac{c}{n_g}  *  t[/tex]

Here n_g  is the refractive index of  glass with value 1.5

So

      [tex]D_g  = \frac{3.0*10^{8}}{1.5}  *  3.33*10^{-9}[/tex]

     [tex]D_g  =0.67 \  m [/tex]

The distance light travels in cubic zirconia is mathematically represented as

       [tex]D_c  = \frac{c}{n_g}  *  t[/tex]

Here n_c  is the refractive index of cubic zirconia with value 2.15

So

      [tex]D_c  = \frac{3.0*10^{8}}{2.15}  *  3.33*10^{-9}[/tex]

     [tex]D_c  =0.46 \  m [/tex]

Answer:

the one with 2 batteries

The Answer Is - 0.58 Kilogram's

Hope This Help's

• Answer:

0.58 kg

• Explanation:

1 kg = 1000 g

580 g = 0.58 kg

Answer:

Newton's third law: If an object A exerts a force on object B, then object B must exert a force of equal magnitude and opposite direction back on object A. This law represents a certain symmetry in nature: forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.

Explanation:

Newtons third law of motion states that if a force is exerted on an object, another force occurs that is equal in side an opposite in direction.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Newton's third law: If an object A exerts a force on object B, then object B must exert a force of equal magnitude and opposite direction back on object A. This law represents a certain symmetry in nature forces always occur in pairs, and one body cannot exert a force on another without experiencing a force itself.

Newtons third law of motion states that if a force is exerted on an object, another force occurs that is equal in side an opposite in direction.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

Answer:

The  correct option is  A

Explanation:

Generally the force on [tex]q_2[/tex] is mathematically represented as

      [tex]F_2 = \frac{ k * q_1 * q_2 }{ x^2}[/tex]

here k is the coulombs constant with value [tex]k = 9*10^{9}\ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}.[/tex]

=>   [tex]F_2 = \frac{ 9*10^{9} * 10*10^{-9} * 18*10^{-9} }{ 9^2}[/tex]

=>    [tex]F_2 = 2*10^{-8} \ N[/tex]

=>   [tex]F_2 = 20*10^{-9} \ N[/tex]

=>   [tex]F_2 = 20nN[/tex]

The  direction is  in the positive x-axis because both charge are of the same polarity so the will repel hence [tex]q_2[/tex] will move toward the positive x-axis

Answer:

True

Explanation:

A psychological construct can't be observed and you can feel this,

Example: anxiety, anger, sadness

Answer:

The 2009 inflation rate was -0.36%. The current year-over-year inflation rate (2019 to 2020) is now 0.99%

Explanation:

Answer:

Ta - Tb = 4.84 sec (approx)

Explanation:

Time taken by A = Time taken By B + Extra time

Ta - Tb = T

We know that

Time (T) = [v-u] /a ...................[a=9.8 m/s²]

So,

Ta - Tb = [v-u] /a

Ta - Tb = [-23.7-23.7] /9.8

Ta - Tb = 4.8367 sec

Ta - Tb = 4.84 sec (approx)

Answer:

Downstream displacement = 1.1648 km

Explanation:

Given:

Speed of flow = 5.6 km/h

Speed of current upstream = 7.7 km/h

Increase in size = 1.6 km wide

Computation:

Total time to cross = Increase in size / Speed of current upstream

Total time to cross = 1.6 / 7.7

Total time to cross = 0.208 h

Downstream displacement = Speed of flow × Total time to cross

Downstream displacement = 5.6 × 0.208

Downstream displacement = 1.1648 km

Answer: a. Stall AOA increases, CL max increases.

Explanation:

Deploying slats or slots on an airfoil affect CL max and Stall AOA by increasing Stall AOA and also increasing CL max.

It should be noted that the coefficient of lift CL would rise through the use of slots due to increase in boundary later energy. The slots also leads to delay of stall by through increase in AOA.

Answer:

(a).

We know that force is

F = m a

So

F = (1.67 x 10^(-27) x (1.38 x10^12)

F = 2.3 x 10^-15 N facing the radially outward direction

(b).

Similarly Force for charge is

F = q E = m a

So relating

E = F/q = 2.3x 10^-15 /(1.6 10^ -19

E = 144.75 N/C facing the radially outward direction

The answer to the question is

(a) The force on the proton is [tex]2.254\times10^{-15}\,N[/tex] directed radially outwards.

(b) The electric field at the surface of the generator is [tex]14031.25\, N/C[/tex] directed radially outwards.

The answer can be explained as shown below.

Given that a proton accelerates radially outward at [tex]1.35\times 10^{12}\,m/s^2[/tex].

From Newton's second law we have,

But here, [tex]m=m_p[/tex]

So, the electric force on the proton is;

Also, we know that, in electrostatics,

Therefore, the electric field is given by,

Learn more about the electric force here:

https://brainly.com/question/8960054

Answer:

Nonrenewable Resources

Answer:

fossil fuels

Explanation:

Answer:

a gene is the basic physical and functional unit of heredity.

Genes are section of DNA that code for a particular trait. Genes are basic unit of inheritance in all living things specifying the physical and biological traits.

The precise meaning of the term "gene" has long been a topic of discussion in science. Here's an easy way to think about it: Our cells and tissues are built with proteins as the foundation. And genes are the area of our genome where the instructions for constructing those proteins are stored.

For instance, the human genome has over 20,000 genes that code for proteins. It's interesting to note that just 1.5% of the complete human genome contains all of the information for those 20,000 protein-coding genes.

A broader definition of a gene includes DNA sequences, sometimes called RNA genes, that include instructions for building an RNA molecule that performs a function other than directly encoding a protein.

Find more on genes:

https://brainly.com/question/29367774

#SPJ5