Explanation:
Since you're 16, you have to calculate how many seconds you've lived.
16 years × 31,536,000= 504,576,000 pennies.
504,576,000÷58 (for the amount of gold) = 8699586.2069 grams
Then go on from there. Hope that helped!
One liter of a gas is in a sealed chamber containing a moveable piston. If the piston is moved so that the volume of the gas is compressed to a volume of one-half liter, what will happen to the pressure on the gas? (Assume the temperature is constant and no gas particles are lost.)
Answer:
One liter of a gas is in a sealed chamber containing a moveable piston. ... It would be impossible to move the piston since gases are not compressible. The pressure will be twice the original value.
Explanation:
How many liters of Argon gas are present in a 10.5 mole sample?
Answer:
235.2 L ( if the sample is under S.T.P condition )
Explanation:
For any gas at S.T.P (0°c, 1 atm), 1 mole=22.4 L
Thus, for 10.5 mole of Ar, there are 10.5*22.4=235.2 L
5.40X10^2kj converted into j
Answer:
540,000 (5.4X10^5)
Explanation:
kj means Kilojoules, while we are converting to joules.
- Kilo, or k, represents our base value, Joules, multiplied by 10^3. To convert to joules, we would simply multiply by 10^3 (which is 1000)
how much mercury-203 remains after 200 days
Answer:
50%
Explanation:
How are photosynthesis and cellular respiration related?
A. Photosynthesis releases energy, while cellular respiration stores energy
B. Cellular respiration breaks down glucose, while photosynthesis produces glucose.
C. Cellular respiration is the process animals use to produce glucose, while photosynthesis is the process plants use to produce glucose.
D. Photosynthesis produces water molecules, while cellular respiration splits water molecules apart.
Answer:
B part is the correct answer
How many grams of chlorine are required in order to consume 100g of sodium chloride?
Answer:
92.1 g
Explanation:
Answer: 92.1 grams
I hope this helped :3
Deep sea divers can experience the bends due to an increased amount of nitrogen in the blood
with higher pressure if they dive deeper than 40 meters and come up too fast. If at 1.05 atm
(surface conditions) the solubility of nitrogen, N2, is 21.1 mg/L, what is the solubility at this 40m
depth where the pressure is 4.97 atm?
a. 21.1 mg/L
b. 42.2 mg/L
C. 49.9 mg/L
d. 99.9 mg/L
b is the correct answer
Answer: D. 99.9mg/L
Explanation:
21.1x4.97/1.05=99.9
Why is it necessary to keep the total number of drops in the test tubes
consistent?
Answer:
I don't know if this is right but..
Explanation:
It is important to keep the volume of the reactant constant because it ensures that the temperature change was the result of the reactants consumed
Why it is necessary to keep the to drops in the test tubes consistent is:
To be able to achieve your desire results, it is imperative that you follow the procedure and use the drops specified because any other drop may shift the equilibrium to the right and this will increase the rate of reaction leading to more collisions of that reactant in a specific time period and therefore alter (slow or increase) the chemical reaction.In a chemical reaction, the reactants, are undergoing chemical reaction which therefore brings about a products. The reaction rate shows how quickly or slowly the reaction takes place.Conclusively, Why it is necessary to keep the to drops in the test tubes consistent is:
To be able to achieve your desire results, it is imperative that you follow the procedure and use the drop specified because any other drop may shift the equilibrium to the right and this will increase the rate of reaction leading to more collisions of that reactant in a specific time period.Learn more from
https://brainly.com/question/14197404
How many kilojoules (kJ) in 373 joules (J)?
Answer: There are 0.373 kJ in 373 joules.
Explanation:
According to the standard conversion units 1 kJ is equal to 1000 J. This means that 1 J is equal to 0.001 kJ.
Hence, 373 joules is converted into kilojoules as follows.
[tex]1 J = 0.001 kJ\\373 J = 373 J \times \frac{0.001 J}{1 kJ}\\= 0.373 kJ[/tex]
Thus, we can conclude that there are 0.373 kJ in 373 joules.
(i)What happens when an aqueous solution of sodium sulphate reacts with an aqueous
solution of barium chloride ? (i) Write the balanced chemical equation for the reaction which takes place.(ii) Name the type of chemical reaction which occurs. Define.
Explanation:
2nacl+baso4
the orginal equation is
Na2so4+Bacl2
then na react with cl and ba react with so4
from E=mc²=hv show that wavelength=h/mv
Explanation:
To show - from E=mc²=hv show that wavelength=h/mv
Proof -
Given that,
E = mc²
E = hν
By equating both the equations, we get
mc² = hν
Because real particles do not travel at the speed of light, De Broglie submitted velocity ( v ) for the speed of light ( c ).
mv² = hν
Through the equation λ , de Broglie substituted v/λ for ν and arrived at the final expression that relates wavelength and particle with speed.
mv² = hv/λ
⇒λ = hv/mv²
⇒λ = h/mv
Hence showed.
match the following
Of scinece chapter
mechanism of the reaction citric acid with sodium bicarbonate?
Explanation:
When citric acid and baking soda react with one another, they change chemi- cally and form sodium ions, citric acid ions, carbon dioxide gas, and water. ... It also makes up the bubbles in carbonated drinks and is a gas we naturally exhale. Carbon dioxide gas is safe in the quantities produced in the activities.
Which of the following is most easily oxidized?
A. Ni2+
B. Fe3+
C. H+
D. Fe2+
Answer:
B: Fe3+
Explanation:
Usually in oxidation reactions, the oxidation number of a monatomic ion is the same as the charge on the ion, for example: oxidation number for Na^(+) is +1 , while in S^(2-), oxidation number is -2.
Now, from the activity series of metals in aqueous solution which I attached, we will see that iron (Fe) is easily oxidized than Nickel (Ni2+) and hydrogen (H+).
So we are left with Fe^(2+) and Fe^(3+).
Now, an increase in oxidation number means the more likely to be oxidized.
Thus, Fe^(3+) is the most easily oxidized.
What are the IUPAC name?
Answer:
IUPAC
Explanation:
International Union of Pure and Applied Chemistry
34. Which statement describes what occurs in the
following redox reaction?
Cu(s) + 2Ag (aq) → Cu2+ (aq) + 2Ag(s)
(1) Only mass is conserved.
(2) Only charge is conserved.
3 Both mass and charge are conserved.
(4) Neither mass nor charge is conserved.
Answer:
3 Both mass and charge are conserved.
Explanation:
The equation of the reaction is;
Cu(s) + 2Ag+ (aq) → Cu2+ (aq) + 2Ag(s)
A redox reaction is an acronym for oxidation-reduction reaction. This refers to a reaction in which the oxidation number of one specie is increased while the oxidation number of the other specie is decreased.
This means that one specie looses electrons while the other specie gains electrons. Here, Cu(s) looses electrons while Ag+(aq) gains electrons from left to right in the reaction.
In a redox reaction, both mass and charge are conserved. This means that the total mass and charge on the reactants side is the same as the total mass and charge on the products side.
Give the Shorthand Electron Configuration for the following elements:
Nickel
Group of answer choices
[Kr] 3d8 4s2
[Ne] 3d6 4s2
[Ar] 3d8 4s2
answer of this question is [Ar]3d8 4s2
Answer: [Ar] 3d8 4s2
Explanation: Wikipedia
The minimum combined kinetic energy reactant particles must possess in order for their collision to result in a reaction is called the
Answer: Activation energy
Explanation:
In a chemical reaction, the reactants contains particles which must collide in order for a reaction to occur. The rate of reaction depends on the frequency of effective collision between the reacting particles. Effective collision are those that result in reactions, which when they occur the colliding particles become activated with increased kinetic energy.
This energy must exceed a particular energy barrier for a particular reaction if the reaction must take place. This energy barrier that must be overcome before a reaction takes place is known as the ACTIVATION ENERGY.
To explain further, when two particles or molecules A and B come in contact with each other, for a reaction to take place, they must collide with a sufficient force to break the bond that exists between them. The minimum combined kinetic energy these reactant particles must possess in order for their collision to result in a reaction is called the activation energy.
Name one common base that is NOT harmful to the body when ingested AND a product, or way, in which it is used.
Answer:
well when you eat some food you will get many tastes mixed with base and acid but salt from NA2CO3 can be a base if it is contained with weak acid.
Explanation:
Basically SALT can be one common base that is NOT harmful to the body when ingested AND a product, or way, in which it is used.
Magnesium hydroxide (Mg(OH)2) is not harmful to our body when ingested AND a product, or way, in which it is used. It is commonly used to get relief from acidity, that is caused when our stomach releases excessive acid. It neutrelises the acid and gives us relief. It is also called Milk of Magnesia commonly.
What is the mass of 6.02 x 1023 atoms of carbon-12?
A)
me
6 grams
B)
6.02 grams
6.02 x 1023
grams
D)
12 grams
Answer: its D 12 grams
Explanation: you just have to find the molar mass of carbon in the periodic table
Which process produces the energy that is used by solar panels?
O A. Nuclear fusion
O B. Combustion
O C. Chemical decay
D. Nuclear decay
Answer:
B
Explanation:
Answer:
A
Explanation: got it right
what is hard water??
Answer:
Hard water is any water that does not lather easily with soap. pipe water is an example of hard water.
I hope this helps . good luck.
can someone please help me im stuck
Answer:
The answers to your questions are given below.
Explanation:
1. __H₂ + __O₂ —> __H₂O
The above equation can be balance as follow:
H₂ + O₂ —> H₂O
There are 2 atoms of O on the left side and 1 atom on the right side. It can be balance by writing 2 before H₂O as shown below:
H₂ + O₂ —> 2H₂O
There are 2 atoms of H on the left side and a total of 4 atoms on the right side. It can be balance by writing 2 before H₂ as shown below:
2H₂ + O₂ —> 2H₂O
Now the equation is balanced.
Elements >>> Reactants >>> Products
H >>>>>>>>> 4 >>>>>>>>>>> 4
O >>>>>>>>> 2 >>>>>>>>>>> 2
2. __ P₄ + __O₂ —> __P₂O₃
The above equation can be balance as follow:
P₄ + O₂ —> P₂O₃
There are 4 atoms of P on the left side and 2 atoms on the right side. It can be balance by writing 2 before P₂O₃ as shown below:
P₄ + O₂ —> 2P₂O₃
There are 2 atoms of O on the left side and a total of 6 atoms on the right side. It can be balance by writing 3 before O₂ as shown below:
P₄ + 3O₂ —> 2P₂O₃
Now, the equation is balanced
Elements >>> Reactants >>> Products
P >>>>>>>>> 4 >>>>>>>>>>> 4
O >>>>>>>>> 6 >>>>>>>>>>> 6
Is anyone good at chemistry if so Is it possible could someone help me please
NO LINKS I REPEAT NO LINKS
344.0 / 68.8 = 5 (no.of half life that have elapsed)
Mass remains = (1/2)^n × (original mass)
= (1/2)^5 × 200
= (0.5) ^5 × 200
= 0.03125 × 200
= 6.25 grams
Please hurry!!! And help!!
*URGENT*
Best answer gets marked Brainliest!
NO LINKS or question will be REPORTED!
Why is elemental zinc considered a pure substance
A) it is a metal
B) it is a mixture of different atoms
C) it must be created in a lab
D) all elements are considered pure substances
Answer:
D
Explanation:
Answer:
D
Explanation:
Because it is true
Describe the process of making 1.0 L of a 0.03 M solution of cobalt (II) chloride from the solid state. Be sure to include all instrumentation and glassware.
Answer:
By measuring out 3.9 grams of cobalt (II) chloride up to a volume of 1.0 L of solution.
Explanation:
Hello there!
In this case, considering this question about molarity, it turns out possible for us to calculate the required mass of cobalt (II) chloride by firstly compute the moles present in 1.0L of the given 0.03-M solution:
[tex]M=\frac{n}{V} \\n=V*M\\\\n=1.0L*0.03\frac{molCoCl_2}{L}\\\\n=0.03molCoCl_2[/tex]
Next, since the molar mass of cobalt (II) chloride is 129.84 g/mol, we compute the grams we need to measure out in order to prepare this solution:
[tex]m_{CoCl_2}=0.03molCoCl_2*\frac{129.84gCoCl_2}{1molCoCl_2} \\\\m_{CoCl_2}=3.9gCoCl_2[/tex]
Regards!
Which statement describes the law of conservation of energy? A. All systems will exchange matter and energy with their surroundings. B. All systems can exchange energy, but not matter, with their surroundings. C. Energy cannot be created nor destroyed, but it changes from one form to another. D. Energy is destroyed in most chemical reactions when new products are formed.
\\\\\
Answer:
C, energy cannot be created nor destroyed.
Explanation:
ch3cooh number of bonding pairs and lone pairs.
Answer:
whats the question?
Explanation:
What is the [OH-] of a solution with a pH of 3.89?
Which one is it?
7.76 x 10^-11
1.29 x 10^-4
2.11 x 10^-6
4.51 x 10^-10
Answer:
the answer is 211106 is better than anything else about u and then let's go play with kids like that first time in the class ohh ok
How much is 1 mole of something?
Answer: D.
Explanation:
6.02 * 10^-23