Answer:
Wood, brick or stone. I you want to make it for a school project then you can use sticks.
Hope it helps!!!
Explain the difference between reconnaissance and intelligence.
Answer:
Kindly check explanation
Explanation:
Intelligence may be explained as the informations, leads or data about a specific target. This information may come from different sources including witnesses such as other suspects, tapes, intercepted voice signals and so on. Reconnaissance on the other hand also involves gathering of information. However, In reconnaissance, it requires preliminary survey of the same te in question which involves site visitation and obtaining strategic information from the explored site. It may involve marking off certain areas and most times opens up idea on further indepth research of certain observed phenomenon.
What is the mass of the same dragster body (volume of 150 cm3) if it is made of basswood instead?
Answer:
the answer is 61.5
Explanation:
Which type of fires should you fight with a portable fire
extinguisher?
Answer:
Class A fires
Explanation:
Class A fires are fires caused by ordinary combustibles, like wood. Assuming this is a portable water fire extinguisher, you should never use it on Class B fires or electric fires.
how many color are in da rainbow
Answer:
The classic rainbow has 6 colours. However, I have heard it other ways. The classic is listed below, as well as one example of the various colour patterns used in rainbows.
Examples:
Classic: Red, Orange, Yellow, Green, Blue, Purple
Ex. 1: Red, Orange, Yellow, Green, Blue, Indigo, Violet
Good luck!!
How much will it cost to train the entire company to use a recycling program if the training includes paper handouts? (Remember, the training will take one hour and a team of three people will take three hours each to create the training program.) With the current budget, is it possible to train the company and buy recycling carts if recycling pickup in your city is free? Assume the best choice for recycle carts in your area was $80 per cart.
Answer:
With the current budget of $1,000, it is possible to train the company and buy 3 recycling carts given that recycling pickup within the area is free
Explanation:
The office waste management budget that is not being spent = $1,000
The given expense parameters are;
The training cost per hour per employee = $12.00
The number of people in the entire company = 45
The cost of preparing the training material per hour = $20.00
The number of people to create the training material = 3 people
The time it will take each person in creating the training material = 3 hours
The cost of recycling cart = $80.00 per cart
The cost of paper handouts per employee = $0.05
The cost of materials include;
The total cost for the training = $12.00 × 45 = $540
The cost for the handout = $0.05 × 45 = $2.25
The cost of preparing the materials = $20.00 × 3 × 3 = $180.00
The total costs of the training = $540 + $4 + $180.00 = $724
The amount available to buy cart = $1,000 - $724 = $276
Therefore;
The amount available to buy cart = $276
The number of carts that can be bought = 276/80 = 3.45 carts
Therefore, we round down to get;
The number of carts that can be bought = 3 carts
8. What is the proper name of this starting system used on selected vertical crankshaft engines? Click here to enlarge image Super-Start Easy-Spin Auto-Start Ready-Start
Answer:
Ready-Start
Explanation:
The Ready-Start system is built to sense the temperature of the engine and to supply the proper fuel amount to the carburetor, such that the engine starts on or before the completion of two short attempts to crank the engine at weather temperatures of more than 32 °F
The two major components which the Ready-Start system incorporates into the engine are'
1) A thermostat
2) An air vane
The difference in quantity between the add and full marks on an engine oil dipstick is typically
O 1 gallon
Answer:
1 quart (0.9 liters).
Explanation:
A proper inspection of various systems and components in a vehicle at regular intervals is very important and necessary because it helps to ensure that the vehicle is in a safe and reliable condition.
Generally, these inspection includes tyres, lighting systems, fan belts, shock absorbers, fluid (oil and water) level, etc. If any fault or concern is detected in the course of an inspection, it should be noted for quick repair or servicing by an expert technician.
All automobile engine requires an adequate amount of engine oil as a lubricant so as to mitigate friction and enhance proper functionality of the vehicle. Thus, the proper functionality of an engine is largely dependent on the level of the engine oil; it shouldn't be too low or high.
Basically, the engine oil should be checked at regular intervals (periodically) and should be on the level indicated or chosen by the manufacturer of the vehicle.
A dipstick is designed to be used for checking the engine oil level in a vehicle and it is marked with lines indicating minimum and maximum, low and high or add and full.
The difference in quantity between the add and full marks on an engine oil dipstick is typically 1 quart (0.9 liters).
can you forge magnet
Answer:
Yes
Explanation:
If someone could make a magnet, then u could make one too :D
What effect will increasing numbers of high-profile green building projects likely have on thinking about building?
More thought will be given to the total impact of a construction project.
Thinking about building will focus more on the specific needs of any given project.
Thinking will become more collaborative and team based.
Thinking about building will center on location and maximizing local labor sources.
Answer:
More thought will be given to the total impact of a construction project.
Explanation:
Correct on Edge 2020
An electric heater has a resistance of 15 ohms and is connected to a 120 volt circuit. What how many amps are in the circuit?
Answer:
8A
Explanation:
Ohm's Law
V = I*R
I = current = amps
I = V/R
I = 120/15
I = 8A
Let's see
Current =I
Using ohm's law
V=IR120=15II=8Awhy was a phone operator automated???
Answer:
When Technology (the phone systems) became more advanced humans became needed less and less in this process
Explanation:
Automatic, or dial, systems were developed in the 1920s to reduce labor costs as usage increased, and to ensure privacy to the customer. As phone systems became more sophisticated, less direct intervention by the telephone operator was necessary to complete calls. Hope this helps you!
Answer:
It was automated to reduce labor costs as usage,increased and to ensure privacy to the customer.
PLEASE HELP AND ANSWER MY OTHER QUESTIONS!,
A person hired by a pharmaceutical company to streamline the company’s drug production process would most likely be an electrical engineer.
True
False
Answer: False
Explanation:
The statement that "a person hired by a pharmaceutical company to streamline the company’s drug production process would most likely be an electrical engineer" is false.
An electrical engineer is an engineer that designs, and tests electrical equipment like smartphones, electric motors, etc. The person designs equipments which makes use of electricity or electronics.
He or she doesn't streamline the company’s drug production process, this can be the role played by the production manager.