Magnesium bromide is prepared in a laboratory using the reaction below. Typically, the magnesium bromide is recoveted as a solid by heating way the remaining water
Mg(s) + 2 HB-(aq) - MgBrac) + H200)
If 0.940 mole of HBr in solution is added to 16.5 grams of Mgo in a beaker and then is heated until dry, what are the expected contents of the beaker?

Lakes dry up. Shortage of water. Decrease in humidity.

Answer:

false i think

Explanation:

Explanation:

the answer will be 98.4 kJ

As per concept of enthalpy of fusion , 98,397 joules of energy  are required to freeze 10 g of water  at 0°C.

Enthalpy of fusion is defined as the enthalpy change which results from when  a substance changes its state from solid to  a liquid at a constant pressure.Heat of solidification is opposite of enthalpy of fusion.During fusion  there is a phase transition which takes place, from liquid to solid.

The temperature at which the fusion takes place is called as the fusion temperature. This enthalpy is accompanied without any change in temperature.

Enthalpy of fusion  of water=333.55 J/g  . This value is for 1 g of water as per definition,hence for 10 g water enthalpy of fusion is 10×333.55=3335.5 J.

Hence, 3335.5 joules are required for freezing 10 g sample.

Learn more about  enthalpy of fusion,here:

https://brainly.com/question/17405472

#SPJ2

Answer:

NOUN

a thing that is composed of two or more separate elements; a mixture

Explanation:

basically a mixture

Answer:

The statements which are correct are;

c) (i), (ii) and (iv)

Explanation:

The chemical equation is presented as follows;

2Fe(s) + 3H₂O(g) → 3Fe₂O₃(s) + 3H₂(g)

Therefore, we have;

i) The iron gains oxygen atoms and therefore gets oxidized

The iron loses 3 electrons each to become oxidized to Fe³⁺ in Fe₂O₃

ii) The water loses oxygen and therefore it is getting reduced

iv) The water donates oxygen and therefore it is acting as the oxidizing agent

The correct options are (i), (ii) and (iv).

Answer:

You solve that dividing beach term by -8 and simplifying which for this answers will give you r=-30

Explanation:

Pls correct me if I’m wrong.

Hope this helps :)

Answer:

Bacterial species are typified by their diversity. There are three notable common traits of bacteria, 1) lack of membrane-bound organelles, 2) unicellular and 3) small (usually microscopic) size.

Explanation:

What Are the Characteristics Common to All Bacteria?

Single-Celled. Perhaps the most straightforward characteristic of bacteria is their existence as single-celled organisms. ...

Absent Organelles. ...

Plasma Membrane. ...

Cell Walls. ...

DNA.

Answer:

B

Explanation:

And, water is called the "universal solvent" because it dissolves more substances than any other liquid. This allows the water molecule to become attracted to many other different types of molecules.

Answer:

I believe it's B

Explanation:

Water can dissolve with any that's why it's universal and can dissolve substancrs more than any other Liquid.

please give me brainliest!

hope this helps

Answer:

I hope I can help you

I hope I can help you

The new pressure : P₂ = 1038.39 mmHg

Given

1.5 L container at STP

Heated to 100 °C

Required

The new pressure

Solution

Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure).

So P₁ =  1 atm = 760 mmHg

T₁ = 273 K

T₂ = 100 °C+273 = 373 K

Gay Lussac's Law  

When the volume is not changed, the gas pressure is proportional to its absolute temperature  

[tex]\tt \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

Input the value :

P₂=(P₁.T₂)/T₁

P₂=(760 x 373)/273

P₂ = 1038.39 mmHg

Answer:

D is the answer

Like my answer

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the correct option is option D.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.

The two elements will form an ionic bind because one of the elements will donate two electrons to the other elements in order to have full outer shells.

Therefore, the correct option is option D.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

Answer:

I have the lowest electronegativity of the nonreactive elements. My family name is alkali metals. I am classified as a reactive metal. I have one valence electrons.

Explanation:

Electronegativity refers to the ability of the atoms of an element to attract electrons to itself. Based on their nature, non-metals are electronegative elements whereas metal are electropositive as they have a tendency to give up their electrons rather than attract electrons to themselves.

In the periodic table of elements, non-metallic character, and hence, electronegativity increases from left to right across a period, and decreases down a group. The most electropositive element is fluorine. On the other hand, electropositivity decreases across a period from left to right but increases on going down a group. Hence, the most electropositive element is Francium. This also means that Francium is the least electronegative element,

francium belong to the group 1A of the periodic table which are the most reactive metals. The family of group 1A elements are known as alkali metals. They possess only one valence electron which they easily give up to form univalent positive ions or cations. Francium is a radioactive element.

Answer:

6.02E23Na

Explanation:

you just convert the element to a decimal form

Answer:

If the solution is not in contact with air, nothing will happen. If the solution is in contact with air, it will be not a reaction between copper, water and sodium chloride..

in the end there will be no reaction

Answer:

150g-125g

=25 of hot chocolate mix

Answer:

120 gram sample of a radioactive element, how many grams of that element will be left after 3 half-lives have passed? If you have a 300

Explanation:

Hope this helps!

Answer: D. 1600 L

Explanation:

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given volume}}{\text {Molar volume}}[/tex]

[tex]\text{Number of moles of nitrogen}==\frac{1000L}{22.4L}=44.6moles[/tex]

[tex]\text{Number of moles of hydrogen}==\frac{2400L}{22.4L}=107.1moles[/tex]

[tex]N_2(g)+3H_2(g)\rightarrow 2NH_3(g)[/tex]  

According to stoichiometry :

3 moles of [tex]H_2[/tex] require 1 mole of [tex]N_2[/tex]

Thus 107.1 moles of [tex]H_2[/tex] will require=[tex]\frac{1}{3}\times 107.1=35.7moles[/tex] of [tex]N_2[/tex]

Thus [tex]H_2[/tex] is the limiting reagent as it limits the formation of product and [tex]N_2[/tex] is the excess reagent.

As 3 moles of [tex]H_2[/tex] give = 2 moles of [tex]NH_3[/tex]

Thus 107.1 moles of [tex]H_2[/tex] give =[tex]\frac{2}{3}\times 107.1=71.4moles[/tex]  of [tex]NH_3[/tex]

Volume of [tex]NH_3=moles\times {\text {Molar volume}}=71.4moles\times 22.4L/mol=1600L[/tex]

Thus volume of ammonia produced is 1600 L

The first step of carbon cycle is animals are breaking down organic molecules and releasing carbon dioxide into the atmosphere.

Carbon cycle completes into four steps: photosynthesis, decomposition, respiration, and combustion.

In the first step, carbon enter the environment by respiration, and in the second step, carbon dioxide is consumed by plants.

Thus, the correct option is B.

Learn more about carbon cycle

https://brainly.com/question/1627609

#SPJ2

Answer:

Two other beneficial properties of the oil include the inhibition of corrosion of metal surfaces, such as steel, and the removal of dirt and detritus via detergency.

Properties of water include its chemical formula H2O, density, melting, boiling point & how one molecule of water has two hydrogen atoms covalently bonded to one oxygen atom.

Answer:

binary and 11

Explanation:

CaCl2 or Calcium Chloride is an ionic bond and not a covalent bond. Since there should be sharing of electrons between two atoms to be a covalent bonding. In case of calcium chloride, the calcium gives up an electron to each chlorine atom, becoming Ca2+ ions and chlorine become Cl– ions.

:)

The final temperature : t=77.74 °C

Given

500 g coffee, t = 80 °C

110 g aluminum cup, t = 30 °C

Required

The final temperature

Solution

Q in = Q out

Q absorbed = Q released

Q aluminum cup = Q coffee

110 x 0.9 x (t-30)=500 x 4.18 x (80-t)

99t-2970=167200-2090t

2189t=170170

t=77.74 °C

Answer:

the answer is sodium

Explanation:

hope this helps

Na more reactive than Cu

Given

Copper in a solution of NaCl

Required

The displacement theory

Solution

A single replacement reaction is a chemical reaction in which one element replaces the other elements of a compound to produce new elements and compounds

Not all of these reactions can occur. We can use the activity series, which is a list of elements that can replace other elements below / to the right of them in a single replacement reaction.

The voltaic series:  

Li-K-Ba-Ca-Na-Mg-Al-Mn- (H2O) -Zn-Cr-Fe²⁺-Cd-Co-Ni-Sn-Pb- (H) -Cu-Hg-Fe³⁺-Ag-Pt-Au  

The electrode which is easier to reduce than the hydrogen (H2) electrode has a positive sign (E red= +) and is located to the right of the voltaic series (right of H)  

The electrode which is easier to oxidize than the hydrogen (H2) electrode and is difficult to experience reduction has a negative sign (E red= -) and is located to the left of the voltaic series (left of H)

Reaction

Cu + NaCl≠

The existing copper element can not replace the sodium element, which is on the left side so the reaction will not occur.

But if it is reversed, then a reaction can occur

2 Na + CuCl2 → Cu + 2 NaCl

Answer:

H2SO4 + CaCO3 → CaSO4 + H2O + CO2 - Balanced equation | Chemical Equations online!

Na2co3 HCL nacl h2o co2

This is an acid-base reaction (neutralization): Na 2CO 3 is a base, HCl is an acid. This is a gas evolution reaction, CO 2 is the formed gas.

Answer: The number of protons in cation is more than the number of electrons

Explanation:

cations are positive ions that means that they lose electrons to be stable nd have electron configuration (atomic number ) equivalent to the preceding noble gas

as : sodium 11 , it loses on electron to be stable and its electron configuration is equivalent to neon 10

so ,the number of protons in cation is more than the number of electrons

i hope it helps!