Answer:
C8H16O4
Explanation:
C2H4O= 24+4+16
44
n=molar mass/empirical formula
n=176.21/44
=4
Therefore
Molar Formula= (C2H4O)4=C8H16O4
From where do the placenta and umbilical cord develop?
Answer:
it develops from the womb
Answer:
outer cells of the blastocyst
Explanation:
on edg:)
Given 450.98 g of Cu(NO3)2, how many moles of Ag can be made? Provide your final answer rounded to two decimal places.
Cu + 2 AgNO3 → Cu(NO3)2 + 2 Ag
Answer:
4.82 moles of Ag.
Explanation:
We'll begin by calculating the number of mole in 450.98 g of Cu(NO₃)₂. This can be obtained as follow:
Molar mass of Cu(NO₃)₂ = 63.5 + 2[14 + (16×3)]
= 63.5 + 2[14 + 48]
= 63.5 + 2[62]
= 63.5 + 124
= 187.5 g/mol
Mass of Cu(NO₃)₂ = 450.98 g
Mole of Cu(NO₃)₂ =?
Mole = mass /Molar mass
Mole of Cu(NO₃)₂ = 450.98 / 187.5
Mole of Cu(NO₃)₂ = 2.41 moles
Next, we shall determine the number of mole of Cu needed to produce 450.98 g (i.e 2.41 moles) of Cu(NO₃)₂. This can be obtained as follow:
Cu + 2AgNO₃ —> Cu(NO₃)₂ + 2Ag
From the balanced equation above,
1 mole of Cu reacted to produce 1 mole of Cu(NO₃)₂.
Therefore, 2.41 moles of Cu will also react to produce 2.41 moles of Cu(NO₃)₂.
Thus, 2.41 moles of Cu is needed for the reaction.
Finally, we shall determine the number of mole of Ag produced from the reaction. This can be obtained as follow:
From the balanced equation above,
1 mole of Cu reacted to produce 2 moles of Ag.
Therefore, 2.41 moles of Cu will react to produce = 2× 2.41 = 4.82 moles of Ag.
Thus, 4.82 moles of Ag were obtained from the reaction.
Consider the following reaction where K. = 9.52 10 2 at 350 K.
CH,(g) + CC14(2)—2CH2Cl2(g)
A reaction mixture was found to contain 2.21*10-2 moles of CH4(E), 3.8710-2 moles of CC1,(g) and 1.06-10-2 moles of CH,C12(2), in
a 1.00 liter container
Is the reaction at equilibrium?
If not, what direction must it run in order to reach equilibrium?
The reaction quotient, Qc equals
The reaction
A. must run in the forward direction to reach equilibrium
B. must run in the reverse direction to reach equilibrium
C. is at equilibrium
Answer:
The correct answer is A :))
What is the percent composition of Mg in the compound Mg3(PO4)2?
A 21.92%
B 23.57%
C 32.32%
D 27.74%
Answer:
D 27.74%
Explanation:
Percent composition of Magnesium (Mg) in Magnesium Phosphate compound ie Mg3(PO4)2 = 27.74%
Answer:
The answer is D
Explanation:
I took the test
If two reactant molecules collide with each other what two reasons might they not combine ?
Iron is a metal. The structure of iron is described as a lattice of positive ions in a sea of
electrons. Which of the following statements about iron are correct?
1 iron conducts electricity because the electrons are free to move
2 iron has a high melting point due to the strong covalent bonds
3 iron is an alloy
4 iron is malleable because the layers of atoms can slide over one another
A. 1 only
B. 1 and 3
C. 1 and 4
D. 2, 3 and 4
Answer: 1and 4
Explanation: iron is an element not an alloy. An ionic lattice is not bonded covalently.
18. What is one of the three things that cause the surface currents of the oceans?
A.differences in salinity
B.temperature differences
C. density differences
D. Coriolis effect
Answer:
b. temperature difference
Please answer, this is due in 30 minutes
Answer:
0.591 g of magnesium phosphate is the theoretical yield.
Magnesium nitrate is the limiting reactant.
Explanation:
Hello!
In this case, since the balanced reaction turns out:
[tex]3Mg(NO_3)_2+2Na_3PO_4\rightarrow Mg_3(PO_4)_2+6NaNO_3[/tex]
Next, we compute the grams of magnesium phosphate yielded by each reactant, considering the present mole ratios and molar masses:
[tex]m_{Mg_3(PO_4)_2}^{by\ Mg(NO_3)_2}=1.00gMg(NO_3)_2*\frac{1molMg(NO_3)_2}{148.31gMg(NO_3)_2}*\frac{1molMg_3(PO_4)_2}{3molMg(NO_3)_2} *\frac{262.86gMg_3(PO_4)_2}{1molMg_3(PO_4)_2} \\\\m_{Mg_3(PO_4)_2}^{by\ Mg(NO_3)_2}= 0.591gMg_3(PO_4)_2\\\\m_{Mg_3(PO_4)_2}^{by\ Na_3PO_4}=1.00gNa_3PO_4*\frac{1molNa_3PO_4}{163.94gNa_3PO_4}*\frac{1molMg_3(PO_4)_2}{2molNa_3PO_4} *\frac{262.86gMg_3(PO_4)_2}{1molMg_3(PO_4)_2} \\\\m_{Mg_3(PO_4)_2}^{by\ Na_3PO_4} = 0.802gMg_3(PO_4)_2[/tex]
Thus, we infer that the correct theoretical yielded mass is 0.591 g as magnesium nitrate is the limiting reactant for which it produces the fewest grams of product.
However, is not possible to compute the percent yield since no actual yield is given, and must be provided or indicated by the problem or an experiment and it not here, nevertheless, you may compute the percent yield by dividing the actual yield by the theoretical and then multiplying by 100:
[tex]Y=\frac{actual}{0.591g}*100\%[/tex]
Best regards!
Consider an experimental setup with two compartments separated by a phospholipid bilayer membrane containing ion channels selectively permeable only to chloride ions. The left compartment (also called inside) contains 1 mM Cl- and the right compartment (also called outside) contains 100 mM Cl-. What will the electrical potential be when the system attains equilibrium
This question is incomplete, the complete question is;
Consider an experimental setup with two compartments separated by a phospholipid bilayer membrane containing ion channels selectively permeable only to chloride ions. The left compartment (also called inside) contains 1 mM Cl- and the right compartment (also called outside) contains 100 mM Cl-. What will the electrical potential be when the system attains equilibrium? [ assume body temperature; log 100 = 2, log 10 = 1, log 1 = 0, log 0.1 = -1, log 0.01 = -2]
Options;
a) -62 mV
b) -124 mV
c) +62 mV
d) 0 mV
e) +124 mV
Answer:
the electrical potential be when the system attains equilibrium is –124mV
Option b) –124mV is the correct answer
Explanation:
Given the data in the question;
Two compartments are divided by lipid bilayer;
In inside compartment Cl- ion concentration- 1mM and out side of the cell concentration is 100mM
now we apply the Nernst equilibrium potential equation;
Chlorine ion valency is z = –1
So
[tex]E_{eq}[/tex] = 62/z × log(ion outside/ ion inside) [for Cl‐ ions]
[tex]E_{eq}[/tex] = (62 / –1) x log( 100 / 1 )
[tex]E_{eq}[/tex] = -62 x 2 =
[tex]E_{eq}[/tex] = –124mV
Therefore, the electrical potential be when the system attains equilibrium is –124mV
Option b) –124mV is the correct answer
Which has more calories: table sugar or aspartame?
Hello there!
Aspartame has 4 kilocalories of energy per gram and table sugar has 3.9 kilocalories. They are pretty much same but aspartame is 200 times sweeter than sucrose so probably would be aspartame that has more calories.
Write the equilibrium expression of each chemical equation.
2H2S(g) 2H2(g) + S2(g)
Answer:
[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2
Explanation:
2H2S(g)⇋2H2(g)+S2(g)2H2S(g)⇋2H2(g)+S2(g)
The equilibrium constant expression in terms of concentrations is:
Kc=[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2.
The equilibrium expression for the given reaction can be written in terms of equilibrium constant which is the ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
What is equilibrium?Equilibrium is a state for a reversible reaction where, the rate of forward reaction is equal to the rate of backward reaction. The rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of the products.
The given reaction at equilibrium state is written as:
[tex]\rm 2H_{2}S (g)\leftrightharpoons 2H_{2} (g)+ S_{2}(g)[/tex]
The equilibrium constant Kb is ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
[tex]Kb = \rm \frac{[H_{2}S]^{2}}{[H_{2}]^{2} [S_{2}]}[/tex]
The rate of the reaction will be r = Kb [H₂]² [S₂].
To find more on equilibrium constant, refer here:
https://brainly.com/question/15118952
#SPJ2
Vitamin C is a covalent compound with the molecular
formula C6H8O6. The recommended daily dietary
allowance of vitamin C for children aged 4-8 years is
0.000142mol. What is the mass of this allowance in grams?
The mass allowance of Vitamin C for children aged 4-8 years is equal to 0.025 grams.
What is a mole?A mole can be defined as a standard unit that can be utilized to evaluate the number of entities such as atoms, molecules, ions, or other particular particles in a particular amount of the substance.
The number of elementary entities present in one mole of any chemical substance was found to be equal to 6.023 × 10²³ which is also known as the Avogadro number.
Given, the number of moles of vitamin C = 0.000142 moles
Given, the molecular formula of Vitamin C is C₆H₈O₆.
The mass of one mole of C₆H₈O₆ = 176 g
One mole of Vitamin C has mass = 176 g
0.000142 mol of Vitamin C has mass = 0.000142×176 = 0.025 g
Therefore, the mass of 0.000142 mol of Vitamin C is 0.025 g.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
There are four conditions an atom needs to meet to participate in hydrogen bonding. It needs to be_______ enough not to bump into other atoms when approaching the 1s orbital of the hydrogen, it needs to carry at least one________ atom, it needs to be_________enough to create a delta on the connected hydrogen, and it needs to have at least one________.
Answer:
The conditions are
1) Small enough
2) Electronegative atom
3) highly electronegative
4) lone pair of electrons
The correct statement therefore is
It needs to be small enough not to bump into other atoms when approaching the 1s orbital of the hydrogen, it needs to carry at least one electronegative atom, it needs to be highly electronegative enough to create a delta on the connected hydrogen, and it needs to have at least one lone pair of electrons.
Explanation:
Hydrogen bonding is a type of intermolecular bond that occurs between the partial positive charge (delta) on a hydrogen atom bonded to a small highly electronegative element (like nitrogen, oxygen or fluorine) and the free electrons on another electronegative element of another molecule.
The hydrogen atom with the partial positive charge (delta) is known as the hydrogen bond donor, while the electronegative element, carrying lone electrons is called the hydrogen bond acceptor.
Let's take a deeper look at these terms:
1) Hydrogen bond donor
Using water (H₂O) as an example, the high electronegativity of the oxygen atom covalently bonded to the hydrogen atom draws the lone electron in the 1s orbital of the hydrogen atom, creating a partial positive charge (d⁺) on the hydrogen atom. This is what happens within one water molecule
2) Hydrogen bond acceptor
When two or more molecules of water interact, the partial positive charge (d⁺) on the hydrogen atom of one molecule, is attracted to the valence or free electrons on the oxygen atom of a nearby molecule of water thus creating a dipole-dipole intermolecular bond known as a hydrogen bond.
For the hydrogen bond to be effective, the electronegative atom bonded to the hydrogen acting as the hydrogen bond donor in the first water molecule needs to be small enough so as not to disrupt the 1s orbital of the hydrogen atom. The smaller the size of the electronegative atom, the stronger the partial negative charge created on the hydrogen atom.
The valence or free pair of electrons on the electronegative (oxygen) atom of the second molecule of water (hydrogen bond acceptor) is what attracts the partial positive charge on the hydrogen atom to create the hydrogen bond
A chemistry student needs 50.0ml of tetrahydrofuran for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of tetrahydrofuran is . Calculate the mass of tetrahydrofuran the student should weigh out. Be sure your answer has the correct number of significant digits.
Answer:
44.45 g of tetrahydrofuran.
Explanation:
From the question given above, the following data were obtained:
Volume of tetrahydrofuran = 50 mL
Density of tetrahydrofuran = 0.889 g/mL
Mass of tetrahydrofuran =?
Density of a substance is simply defined as the mass of the substance per unit volume of the substance. Mathematically, density is expressed as shown below:
Density = mass / volume
With the above formula, we shall determine the mass of tetrahydrofuran needed. This can be obtained as follow:
Volume of tetrahydrofuran = 50 mL
Density of tetrahydrofuran = 0.889 g/mL
Mass of tetrahydrofuran =?
Density = mass / volume
0.889 = mass / 50
Cross multiply
Mass = 0.889 × 50
Mass of tetrahydrofuran = 44.45 g
Therefore, the student should weigh out 44.45 g of tetrahydrofuran.
I need help with this!!!
Answer:
0.73g/cm^3
Explanation:
d=m/v
d=11/15
d=0.73
what is a row of elements across the periodic table called
Answer:
a period
Explanation:
Answer: The row of elements across the periodic table is called "periods".
Explanation:
In the Periodic Table, there are seven rows of elements, which is called periods.
What is the energy of an electron in the third energy level of hydrogen?
Answer:
Electrons in a hydrogen atom must be in one of the allowed energy levels. If an electron is in the first energy level, it must have exactly -13.6 eV of energy.
...
Energy Levels of Electrons.
Energy Level Energy
1 -13.6 eV
2 -3.4 eV
3 -1.51 eV
4 -.85 eV
If 3.53 g of CuNO, is dissolved in water to make a 0.330 M solution, what is the volume of the solution in milliliters?
Answer:
84.8 mL
Explanation:
From the question given above, the following data were obtained:
Mass of CuNO₃ = 3.53 g
Molarity of CuNO₃ = 0.330 M
Volume of solution =?
Next, we shall determine the number of mole in 3.53 g of CuNO₃. This can be obtained as follow:
Mass of CuNO₃ = 3.53 g
Molar mass of CuNO₃ = 63.5 + 14 + (16×3)
= 63.5 + 14 + 48
= 125.5 g/mol
Mole of CuNO₃ =?
Mole = mass / Molar mass
Mole of CuNO₃ = 3.53 / 125.5
Mole of CuNO₃ = 0.028 moles
Next, we shall determine the volume of the solution. This can be obtained as follow:
Molarity of CuNO₃ = 0.330 M
Mole of CuNO₃ = 0.028 moles
Volume of solution =?
Molarity = mole /Volume
0.330 = 0.028 / Volume
Cross multiply
0.330 × Volume = 0.028
Divide both side by 0.330
Volume = 0.028 / 0.330
Volume = 0.0848 L
Finally, we shall convert 0.0848 L to millilitres (mL). This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.0848 L = 0.0848 L × 1000 mL / 1 L
0.0848 L = 84.8 mL
Therefore, the volume of the solution is 84.8 mL.
if a gas at 300k occupies 3.60 liters at a pressure of 1.00 atm, what will be it’s new pressure if the volume is compressed to 2.0 liters at a temperature of 450K?
Answer: The new pressure if the volume is compressed to 2.0 liters at a temperature of 450K is 2.7 atm
Explanation:
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 1.00 atm
[tex]P_2[/tex] = final pressure of gas = ?
[tex]V_1[/tex] = initial volume of gas = 3.60 L
[tex]V_2[/tex] = final volume of gas = 2.0 L
[tex]T_1[/tex] = initial temperature of gas = [tex]300K[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]450K[/tex]
Now put all the given values in the above equation, we get:
[tex]\frac{1.00\times 3.60}{300}=\frac{P_2\times 2.0}{450}[/tex]
[tex]P_2=2.7atm[/tex]
The new pressure is 2.7 atm
Calculate the kinetic energy of an electron ejected from a piece of sodium (Φ = 4.41x10–19 J) that is illuminated with 265 nm light.
in Joules
Answer:
Explanation:
Energy of falling radiation having wavelength of 265 nm
= h c / λ where h is plank's constant , c is velocity of light and λ is wavelength of radiation . Putting the values
Energy of light photon = 6.6 x 10⁻³⁴ x 3 x 10⁸ / 265 x 10⁻⁹
= .0747 x 10⁻¹⁷
= 7.47 x 10⁻¹⁹ J .
Work function of sodium is 4.41 x 10⁻¹⁹
So kinetic energy of ejected electron = energy of falling photon - work function
= 7.47 x 10⁻¹⁹ - 4.41 x 10⁻¹⁹
= 3.06 x 10⁻¹⁹ eV .
Heat will continue to move until the objects or areas have reached the same ______.
Answer: Thermal Equilibrium
Explanation:
Answer:
temperature
Explanation:
I think that's it i'm sorry if i'm wrong
Over an interval of 2.0 s the average rate of change of the concentration of C was measured to be 0.0540 M/s. What is the final concentration of A at the end of this same interval if its concentration was initially 2.000 M
Answer:
Explanation:
the average rate of change of the concentration =
( initial concentration - final concentration ) / time
Initial concentration = 2.000 M
the average rate of change of the concentration = .0540 M/s
time = 2 s
Putting the values
.0540 = (2.000 - X ) / 2
0.108 = 2.000 - X
X = 1.892 M .
Final concentration = 1.892 M .
In which state of matter are the particles at rest (not moving at all)?
none of these
solid
liquid
gas
Answer:
Solids for sure
particles of solid cant flow.
Answer:
B)Solids
Solids have tightly packed particles unlike liquids and gases whose particles can move freely but rate of movement is highest in gas while compared to water