Answer:
3.32 L
Explanation:
Step 1: Write the balanced equation
TiCl₄(l) + 2 H₂O(g) → TiO₂(s) + 4 HCl(g)
Step 2: Calculate the moles corresponding to 14.0 g of TiCl₄
The molar mass of TiCl₄ is 189.68 g/mol.
14.0 g × 1 mol/189.68 g = 0.0738 mol
Step 3: Calculate the moles of H₂O needed to react with 0.0738 moles of TiCl₄
The molar ratio of TiCl₄ to H₂O is 1:2. The moles of H₂O needed are 2/1 × 0.0738 mol = 0.148 mol
Step 4: Calculate the volume corresponding to 0.148 moles of H₂O(g)
At standard temperature and pressure, 1 mole of H₂O(g) has a volume of 22.4 L.
0.148 mol × 22.4 L/1 mol = 3.32 L
What IONS are present in MgCO₃ (magnesium carbonate)? Mark
all that apply.
A Mg+
B C⁴-
C O2-
D Mg²+
E C⁴+
F CO₃²-
Answer:
Answer:
Explanation:
"Magnesium is an alkaline earth metal, and forms a Mg2+ ion. And carbonate ion, CO2−3 , has an equal an opposite charge. And thus the ionic species is MgCO3"
Ionic substances are composed of two or more ions. The compound MgCO3 is composed of Mg²+ and CO₃²- ions.
What are ions?The term ions refer to charged species that are present in a system. The compound MgCO₃ is an ionic substance and ionic substances are composed of ions.
As such, the compound MgCO₃ is composed of the ions Mg²+ and CO₃²-.
Learn moer about ions: https://brainly.com/question/365923
What happens when sodium and chlorine react to make table salt
Please help
Which is true about relative dating?
Potassium –Argon dating is used on very old rocks and minerals.
Carbon-14 dating is used on rocks and minerals that are relatively young
Relative dating uses the half-life of isotopes to get the exact age of a rock or mineral
The law of superposition is used to determine a rocks relative age.
it's the last one because it's depended on the rock layers
Answer:
The law of superposition is used to determine a rocks relative age.
Can some one help I'm lost iam being timed:( Show using two conversion factors how you would convert from 0.020 kg into mg
Answer:
20000 Mg
Explanation:
How many significant figures are in the following measurement? 433.8 liters
Equipment used for solar energy is usually not expensive.
True False
Answer:
False, hope this helps!
Explanation:
How many O atoms are in 7.39 g CO2?
Answer:
2 O atoms
hope it helps....
Answer:
2O is the correct answer
What two methods are used for determining the age of rocks and fossils?
Relative and Absolute Dating
Carbon and Water Dating
Absolute and Resolute Dating
Relative and Absent Dating
Explanation:
first one because absolute dating is a thing for rock layers
Dilute nitric acid reacts with sodium carbonate solution. 2HNO3 (aq) + Na2CO3 (aq) → 2NaNO3 (aq) + H2O (l) + CO2 (g) 25.00 cm3 of sodium carbonate solution of concentration 0.153 mol/dm3 reacts completely with 25.3 cm3 of dilute nitric acid.
a) Calculate the number of moles of sodium carbonate.
b) Use your answer to (a) and the equation for the reaction to calculate the number of moles of nitric acid that reacted.
c) Use your answer to (b) to calculate the concentration of dilute nitric acid in mol/dm3.
d) Use your answer to (a), calculate the maximum volume (at r.t.p.) of carbon dioxide gas that could be produced in this reaction.
1. How would you describe what red cabbage juice is?*
(1 Point)
Acid
Neutral
Alkali
Indicator
Salt
How many formula units of CuCl2 are present in 18.42 g?
Answer:
Think 12 units
Explanation:
Because it represents the hands of the clock
Richard sketched models of two different neutral isotopes of oxygen. If the
isotope models are accurate, which statement might be true? (Refer to the
periodic table if necessary.)
A. One shows 7 protons, and one shows 9.
B. One shows 8 neutrons, and one shows 9.
C. One shows 8 electrons, and one shows 9.
D. One shows 8 protons, and one shows 7.
Answer:
its b
Explanation:
just did the test on A P E X
If the isotope models are accurate, One shows 8 neutrons, and one shows 9. Therefore, the correct option is option B.
What is isotope?A chemical element's isotope is one of more than one species of atoms that share the same atomic number, spot on the periodic table, and almost identical chemical activity, but differ in atomic mass and physical characteristics. There are a number of isotopes for each chemical element.
The first step in identifying and labelling an atom is to count the protons within its nucleus. Usually, this nuclear number is denoted by the letter Z. The fact that all atoms possessing the same number of electrons have essentially equal chemical characteristics lends the atomic number its enormous significance. If the isotope models are accurate, One shows 8 neutrons, and one shows 9.
Therefore, the correct option is option B. If the isotope models are accurate, One shows 8 neutrons, and one shows 9.
To know more about isotope, here:
https://brainly.com/question/11680817
#SPJ5
Can someone help with these questions please???
A mass of 2000 kg is raised through a height of 20 metres in 20 seconds.
What is work done and power developed.
Answer:
Work: 392400 J Power developer: 19620
How is the waste in your body similar to the waste in your home or community
Answer:
Your body naturally gets rid of its waste and in your community/home also has sewers and gutters to also get rid of waste.
10-kg of R-134a at 300 kPa fills a rigid container whose volume is 14 L. Determine the temperature and total enthalpy in the container. The container is now heated until the pressure is 600 kPa. Determine the temperature and total enthalpy when the heating is completed.
Answer:
Temperature = 0.605°C
Total enthalpy at 300kpa = 545.2 kJ
Total enthalpy at 600kpa = 846.45 kJ.
Explanation:
Checking the table for 134a pressure table. It is given that the specific volume of saturated liquid and the specific volume of the saturated vapor of 280kpa is 0.0007699 m^3/kg and 0.072352 m^3/kg respectively.
Also, the specific volume of saturated liquid and the specific volume of the saturated vapor of 320kpa is 0.0007772 m^3/kg and 0.063604 m^3/kg respectively.
The first thing to do is to determine the value for the specific volume of saturated liquid.
At 300 kpa, the specific volume of saturated liquid,n is given below as;
300 - 280/ 320 - 280 = (n - 0.0007699)/ 0.0007772 - 0.0007699.
Therefore, n = specific volume of saturated liquid = 0.0007735 m^3/kg.
300 - 280/ 320 - 280 = n - 0.072352/ (0.063604 - 0.072352).
n = 0.0679 m^3/kg.
The second thing to do is to determine the value of the specific volume.
Specific volume = 14 × 10^-3/ 10 = 0.0014 m^3/kg.
Determine the enthalpy of the mixture,b(I). This is given below as;
300 - 280/ 320 - 280 = b(I) - 199.54/ (196.7 - 199.54).
b(I) = 198.125 kJ/Kg.
Hence, b = [ 300 - 280/ 320 - 280 = j - 50.18 / 55.16 - 50.18] + [ ( 0.0014 - 0.00077735) / 0.067978 - 0.00077735] × 198.125.
b = 54.517 KJ/Kg.
Total enthalpy = 10 × 54.517 = 545.17 kJ.
Temperature can be Determine as below;
300 - 280/ 320 - 280 = T + 1.25 / 2.46 - 1.25.
Temperature = 0.605°C.
Hence, at 600kpa, the total enthalpy = [81.51 + ( 0.0014 - 0.0008199/ 0.034295 - 0.0008199) × 180.90] × 10
Total enthalpy at 600kpa = 846.45 kJ.
1. Hydrogen, Helium, Lithium?
Answer:
what happened to it, have the gone extinct
An unknown compound contains only C , H , and O . Combustion of 5.90 g of this compound produced 11.8 g CO2 and 4.83 g H2O . What is the empirical formula of the unknown compound
Answer:
C₂H₄O
Explanation:
In a compound that contains Cabon, hydrogen and oxygen, the combustion produce CO₂ from the carbon, and H₂O from the hydrogens. Using the mass of the products we can solve the moles of Carbon and hydrogen. The empirical formula is the simplest whole-number of atoms present in a molecule.
Moles CO₂ = Moles C:
11.8g CO₂ * (1mol / 44g) = 0.268 moles CO₂ = 0.268 moles C * (12g/mol) =
3.216g C
Moles H₂O = 1/2 moles H:
4.83g H₂O * (1mol / 18g) = 0.268 moles H₂O * (2 mol H / 1 mol H₂O) =
0.537 mol H * (1g/mol) = 0.537g H
Mass O to find moles O:
5.90g Sample - 3.216g C - 0.537g H = 2.147g O * (1mol / 16g) = 0.134 moles O
Ratio of atoms -Dividing in 0.134 moles-:
C = 0.268mol C / 0.134 mol O = 2
H = 0.537mol H / 0.134 mol O = 4
O = 0.134mol O / 0.134 mol O = 1
Empirical formula is:
C₂H₄OI need help please please
Answer:
B should be the answer, and ur low-key valid lol
Explanation:
9. The times of first sprinkler activation (in seconds) for a series of tests of fire-prevention sprinkler systems that use aqueous film-forming foam is as follows. The system has been designed so that the true average activation time is supposed to be at most 25 seconds. Does the data indicate the design specifications have not been met
This question is incomplete, the complete question is;
The times of first sprinkler activation (in seconds) for a series of tests of fire-prevention sprinkler systems that use aqueous film-forming foam is as follows; 27 41 22 27 23 35 30 33 24 27 28 22 24
( see " use of AFFF in sprinkler systems," Fire technology, 1975: 5)
The system has been designed so that the true average activation time is supposed to be at most 25 seconds.
Does the data indicate the design specifications have not been met?
Test the relevant hypothesis at significance level 0.05 using the P-value approach
Answer:
since p-value (0.042299) is lesser than the level of significance ( 0.05)
We Reject Null Hypothesis
Hence, There is no sufficient evidence that the true average activation time is at most 25 seconds
Explanation:
Given the data in the question;
lets consider Null and Alternative hypothesis;
Null hypothesis H₀ : There is sufficient evidence that the true average activation time is at most 25 seconds
Alternative hypothesis H₁ : There is no sufficient evidence that the true average activation time is at most 25 seconds
i.e
Null hypothesis H₀ : μ ≤ 25
Alternative hypothesis H₁ : μ > 25
level of significance σ = 0.05
first we determine the sample mean;
[tex]x^{bar}[/tex] = [tex]\frac{1}{n}[/tex]∑[tex]x_{i}[/tex]
where n is sample size and ∑[tex]x_{i}[/tex] is summation of all the sample;
= [tex]\frac{1}{13}[/tex]( 27 + 41 + 22 + 27 + 23 + 35 + 30 + 33 + 24 + 27 + 28 + 22 + 24 )
= [tex]\frac{1}{13}[/tex]( 363
sample mean [tex]x^{bar}[/tex] = 27.9231
next we find the standard deviation
s = √( [tex]\frac{1}{n-1}[/tex]∑([tex]x_{i}-x^{bar}[/tex])²
x ([tex]x_{i}-x^{bar}[/tex]) ([tex]x_{i}-x^{bar}[/tex])²
27 -0.9231 0.8521
41 13.0769 171.0053
22 -5.9231 35.0831
27 -0.9231 0.8521
23 -4.9231 24.2369
35 7.0769 50.0825
30 2.0769 4.3135
33 5.0769 25.7749
24 -3.9231 15.3907
27 -0.9231 0.8521
28 0.0769 0.0059
22 -5.9231 35.0831
24 -3.9231 15.3907
sum 378.9229
so ∑([tex]x_{i}-x^{bar}[/tex])² = 378.9229
∴
s = √( [tex]\frac{1}{13-1}[/tex] ×378.9229 )
s = √31.5769
standard deviation s = 5.6193
now, the Test statistics
t = ( [tex]x^{bar}[/tex] - μ ) / [tex]\frac{s}{\sqrt{n} }[/tex]
we substitute
t = ( 27.9231 - 25 ) / [tex]\frac{5.6193}{\sqrt{13} }[/tex]
t = 2.9231 / 1.5585
t = 1.88
now degree of freedom df = n - 1 = 13 - 1 = 12
next we calculate p-value
p-value = 0.042299 ( using Execl's ( = TDIST(1.88,12,1)))
Here x=1.88, df=12, one tail
now we compare the p-value with the level of significance
since p-value (0.042299) is lesser than the level of significance ( 0.05)
We Reject Null Hypothesis
Hence, There is no sufficient evidence that the true average activation time is at most 25 seconds
Water from a riverbed carries sediment downstream. The water pressure cuts deep into the riverbed, creating a deep, narrow channel What has happened? A A delta has formed . B Sand dunes are created. C A volcano has erupted . D A canyon has formed .
Answer:
A canyon has formed.
Explanation:
what is its molar concentration?
Answer:
The correct answer is - the number of moles of solute per liter of solution.
Explanation:
The molar concentration is also known as molarity which is the amount of concentration of a solute is in a chemical solution is the number of moles of solute per unit volume of solution. It is represented as M and can be calculated by:
M = n/v
Where n is the number of moles of the solute and,
v is the volume of solution (in liters normally)
It is worldwide used measurment for the concentration.
How many grams of silver nitrate are needed to prepare 0.125 M solution in 250.0 mL of water?*
(1 Point)
AgNO₃
Ag
= 107.868 8
mol
N = 14.0078
mol
8
0 = 15.999
mol
0.313 g
169.872 g
0.0849 g
5.31 g
O 31.3 g
Answer:5.3 grams AgNO3
Explanation:
To solve your problem, take a look at the definition of molality (m):
moles of solute/kg of solvent
You are given the grams of solvent (water) to find the grams of silver nitrate.
First, convert 250 grams to kg:
250 g * 1 kg / 1000g = 0.250 kg
Now that you have the kg of solvent, you can solve for the moles of solute:
kg of solvent * molality = moles of solute
0.250 kg * 0.125 m = 0.03125 mol AgNO3
You can convert the number of moles to grams using the molar mass of AgNO3, which is 169.872 g/mol:
moles of solute * molar mass of solute = grams of solute
0.03125 mol AgNO3 * 169.872 g/mol = 5.3085 g
Because your question provides two significant digits, you must round this number to get the final answer:
5.3 grams AgNO3
I hope this helps!
When lava cools outside the Earth, ____ igneous rocks are formed
Answer:The rock forms large crystals
Explanation:
Early chemists, known at the time as alchemists, had a difficult time understanding the Law of Conservation of Mass. Using the burning of wood as an example, what property of matter made this law difficult for early scientists to understand?
The law of conservation of mass states that, for any isolated system, the mass can neither be created nor be destroyed
After burning a log, the remains that are left behind after it burns are lesser than what would initially seem. There is a difference in mass before the burning of the log after the burning of the log. This seems like a violation of the law of conservation of mass, which would have made it difficult for early chemists to understand it. But if we consider the surroundings as a system then we can see that the mass that is lost in burning is actually converted into smoke and energy or forming other forms of substances. Then considering the whole system we can see that the mass and energy are conserved and interrelated.learn more about conservation of mass and energy:
https://brainly.com/question/13971039
How many moles of "02" are in a 192g sample of O2? *
1
2
3
4
5
6
7
Answer: The number of moles of [tex]O_2[/tex] are 6.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
Given mass = 192 g
Molar mass = 32 g/mol
[tex]\text{Number of moles}=\frac{192g}{32g/mol}=6mol[/tex]
The number of moles of [tex]O_2[/tex] are 6.
what process formed slate
Answer:
Explanation:
Slate is a fine-grained, foliated metamorphic rock that is created by the alteration of shale or mudstone by low-grade regional metamorphism. It is popular for a wide variety of uses such as roofing, flooring, and flagging because of its durability and attractive appearance.
Answer:
Deep within the Earth's crust rocks can be put under huge pressures and temperatures are very high. These conditions can cause the minerals in the rock to change. This process is called metamorphism. Limestone can change into marble, shale and mudstones into slate, and igneous rocks like granite can turn into gneiss.
Explanation:
Slate is a fine-grained, foliated metamorphic rock that is created by the alteration of shale or mudstone by low-grade regional metamorphism. It is popular for a wide variety of uses such as roofing, flooring, and flagging because of its durability and attractive appearance.
Determine the mass of AgCl(s) produced when 0.91 g of AgNO3 in an aqueous solution reacts with excess NaCl aqueous solution as shown below: AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq) i Respond with the correct number of significant figures in scientific notation (Use E notation and only 1 digit before decimal e.g. 2.5E5 for 2.5 x 10")
Answer:
0.77 g
Explanation:
Step 1: Write the balanced equation
AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)
Step 2: Calculate the moles corresponding to 0.91 g of AgNO₃
The molar mass of AgNO₃ is 169.87 g/mol.
0.91 g × 1 mol/169.87 g = 5.4 × 10⁻³ mol
Step 3: Calculate the moles of AgCl produced from 5.4 × 10⁻³ moles of AgNO₃
The molar ratio of AgNO₃ to AgCl is 1:1. The moles of AgCl produced are 1/1 × 5.4 × 10⁻³ mol = 5.4 × 10⁻³ mol.
Step 4: Calculate the mass corresponding to 5.4 × 10⁻³ moles of AgCl
The molar mass of AgCl is 143.32 g/mol.
5.4 × 10⁻³ mol × 143.32 g/mol = 0.77 g
Ice floats on the surface of water because ice is less dense than liquid water
true or false?
Answer:
yes it is true.
Ice floats on the surface of water because ice is less dense than liquid water
Explanation:
Calcium and titanium atoms have the same mass
Answer:
these elements do not have the same masses.