Answer:
Temperature is a common type of controlled variable. If a temperature is held constant during an experiment, it is controlled. Other examples of controlled variables could be an amount of light, using the same type of glassware, constant humidity, or duration of an experiment.
Explanation:
Consider the following reaction: 2 SO2(g) + O2(g) → 2SO3(g)
If the initial rate of change for sulfur dioxide is -2.00 M/min, what is the initial rate of change of oxygen?
A) -4.00 M/min
B) -1.00 M/min
C) 4.00 M/min
D) 1.00 M/min
Answer:
B) -1.00 M/min
Explanation:
Based on the reaction:
2 SO2(g) + O2(g) → 2SO3(g)
2 moles of SO2 are consumed per mole of O2 producing 2 moles SO3
In the problem, the sulfur dioxide has a rate of change of -2.00M/min. As the moles of oxygen that reacted are half the moles of SO2, its rate of change is halved, that is:
B) -1.00 M/minA student finds that the water's temperature went from 18oC to 38oC. Calculate how many calories are in the peanut.
Answer:
567 calories.
Explanation:
There 567 calories in 100 grams of peanut. In 100 grams of peanut, 49 gram is the fat, 26 grams of protein, 16 grams of carbohydrates, Sodium is 18 mg, Potassium is 705 mg. Calcium is present in peanut about 9%, Iron is 25% , Vitamin B-6 is 15% and Magnesium is 42% of their total weight. Oil content is high in the Peanut so this is the reason for high calories in peanut. It is a good source of proteins and potassium.
Which of the following naming systems would you use to nameHClO2?
Question 6 options:
a)
HYDRO________IC ACID
b)
HYDROGEN _________IDE
c)
________________IC ACID
d)
________________OUS ACID
If you start with 30.0 grams of sodium fluoride, how many grams of magnesium fluoride will be produced?
Answer:
22.2 g of MgF₂
Explanation:
We star from the reaction:
NaF → sodium fluoride
Mg → Magnesium
2NaF + Mg → MgF₂ + 2Na
2 moles of sodium fluoride react to 1 mol of Mg in order to produce 1 mol of magnesium fluoride and 2 moles of sodium.
We convert mass of the reactant to moles:
30 g . 1mol / 41.98 g = 0.715 mol
We assume that Mg is in excess
As ratio is 2:1, if we have 0.715 moles of NaF we may produce the half of moles, of MgF₂
0.715 mol /2 = 0.357 moles of MgF₂
We convert moles to mass: 0.357 mol . 62.30g /mol = 22.2 g
Select the correct mass for each of the samples described below.
3.01 × 1023 molecules H2O
Answer:
9.00 g H2O
Explanation:
Convert molecules to grams using stoichiometry
(3.01 * 10^23 molecules) * (1 mole H2O / 6.022 * 10^23 molecules) * (18.01 g / 1 mole H2O) = 9.00 g H2O
Answer:
answer in picture
Explanation:
How many grams are there in 7.40 moles of AgNO3?
Answer:
1257.03 grams
Explanation:
mass=mole*molar mass
mass=7.4*169.87= 1257.03
Choose ALL
BIOTIC factors
Lesson 5.01
Question 1 options:
protists
animals
fungi
plants
salinity
Answer:
protists
animals
fungi
plants
Explanation:
i took the test let me know if im wrong tho
The biotic factors from the following options are protist, animals, fungi, and plants. Options A, B, c, and D are correct.
What are biotic factors?Biotic factors are those factors which can grow, and reproduce themselves.
Plants, animals, protists, and fungi are biotic factors that live, eat ad reproduce.
Salinity is the quality of any solution. It is not a biotic factor.
Thus, the correct options are A, B, c, and D.
Learn more about biotic factors
https://brainly.com/question/27430655
#SPJ2
Your simulation involved 100 atoms and eight half-life cycles. For half-life cycles 9 and later, how many radioactive nuclei would you expect to be present?
Answer:
you would expect 0 radioactive nuclei to be present
Explanation:
got it right on the assignment
Which of the following best explains the relationship between peak to peak amplitude and semi amplitude
Answer:
Which of the following best explains the relationship between peak-to-peak amplitude and semi-amplitude? Semi-amplitude is half the distance of the peak-to-peak amplitude. Semi-amplitude is the same distance as the peak-to-peak amplitude.
Al+3 and I-
what is the chemical formula and what is the name of the compound
Answer:
AlI3 is the chemical formula and the name of compound is Aluminium iodide.
URGENT: Identify the subatomic particles that determine the atomic number of an element.
Answer:
the number of protons determines the atomic number
Explanation:
Ex. Aluminum has 13 protons, so it's atomic number is 13
hope this helps :)
A loose pile of rocks and soil travels in a single large mass the mass moves a short distance downhill which mass movement does this describe
A. Creep
B. Erosion
C. Landslide
D. Slump
What would make oppositely charged objects attract each other more?
increasing the positive charge of the positively charged object and increasing the negative charge of the negatively
charged object
decreasing the positive charge of the positively charged object and decreasing the negative charge of the negatively
charged object
increasing the distance between the positively charged object and the negatively charged object
maintaining the distance between the positively charged object and the negatively charged object
Answer: increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object.
Explanation:
edge
Answer:
Your answer is A.
Explanation:
what is the k expression for this reaction? plz help !
Answer:
K = [HI]² / [H₂] [I₂]
Explanation:
To write the expression of equilibrium constant, K, it is important that we know how to obtain the equilibrium constant.
The equilibrium constant, K for a given reaction is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient. Thus, the equilibrium constant is written as follow:
K = [Product] / [Reactant]
Now, we shall determine the equilibrium constant for the reaction given in the question above. This can be obtained as illustrated below:
H₂(g) + I₂(g) —> 2HI (g)
K = [HI]² / [H₂] [I₂]
Base A dissociates 25% in water. Base B dissociates 50%. Base C dissociates
75%. Which base is the WEAKEST conductor of electricity?
Answer:Base A is the weakest conductor electricity
Explanation:
Dissociation is a factor that affects electrical conductivity. The greater the percentage of dissociation for bases the stronger the conductivity of electricity.
Given that
Base A dissociates 25% in water
Base B dissociates 50%.
Base C dissociates 75%
We can conclude that Base A is the weakest conductor oelectricity since it has the lowest percentage of dissociation.
The student then takes a 1.00M stock solution of table sugar (sucrose C12H22O11) and mixes 0.305L of stock solution with additional distilled water to create a dilute solution with a total volume of 1.25L.
Explain how the student can determine the molarity of the resulting solution. Show a valid calculation for the final molarity. PLS HELP
Answer: The molarity of final solution is 0.244 M.
Explanation:
Given: [tex]M_{1}[/tex] = 1.00 M, [tex]V_{1}[/tex] = 0.305 L
[tex]M_{2}[/tex] = ?, [tex]V_{2}[/tex] = 1.25 L
Formula used to calculate the molarity f resulting solution is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\1.00 M \times 0.305 L = M_{2} \times 1.25 L\\M_{2} = \frac{1.00 M \times 0.305 L}{1.25 L}\\= 0.244 M[/tex]
Thus, we can conclude that the molarity of final solution is 0.244 M.
Clouds are made up of tiny droplets of water. Which two spheres are clouds a
part of?
A. Biosphere
B. Geosphere
C. Hydrosphere
D. Atmosphere
What is catalyst? Write its types.
Answer:
A catalyst is a chemical substance that alters the rate of chemical reaction not consumed by the reaction. Hence, a catalyst can be recovered chen unchanged at the ends of chemical reaction. Catalyst can be divided into two typ the basis whether it speeds up or slowdowns the rate of chemical reaction. The positive catalyst and negative catalyst.
Answer:
A catalyst is a chemical substance thatalters therate of chemical reactions not consumed by the reactions.
-- A scientist combines 14 grams of potassium nitrate with an unknown amount of
potasslum chloride. If the total mass of the products is 27.6 grams, what was the
mass of the potassium chloride?
Cada
Answer:
The unknown amount of potassium chloride is 13.6 grams.
Explanation:
The reaction of 14 grams of KNO₃ with KCl produces a total mass of 27.6 grams of the products.
The law of conservation of mass tells us that the total mass of the reactants must be the same that the total mass of the products. So, we can find the mass of KCl as follows:
[tex] m_{r} = m_{p} [/tex]
Where r is for reactants and p is for products
[tex] m_{KNO_{3}} + m_{KCl} = m_{p} [/tex]
[tex] 14 g + m_{KCl} = 27.6 g [/tex]
[tex] m_{KCl} = 27.6 g - 14 g = 13.6 g [/tex]
Therefore, the unknown amount of potassium chloride is 13.6 grams.
I hope it helps you!
_____ Ca(NO3)2 + _____ Fe → _____ Fe(NO3)3 + _____ Ca I need this done quick and fast Balancing chemical equations
Answer:
3, 2, 2,3
..........................
What are the two groups the animal kingdom is divided into?
Answer:
Taking the animal kingdom as an example, we can see that it is split into two clear groups: Invertebrates - animals without a backbone. Vertebrates - animals with a backbone.
Explanation:
Which of the following is not an ionic compound
Answer:
bR2 since it is nonpolar
What is the role of a consumer in the flow of energy through a food chain?
Answer:
The role of consumers in an ecosystem is to obtain energy by feeding on other organisms and sometimes transfer energy to other consumers. Changes that affect consumers can impact other organisms within the ecosystem.
Explanation:
Hope this helped Mark BRAINLIEST!!!!
Consumers are organisms that obtain energy by eating other organisms. Consumers may consume either producers or other consumers. Consumers include animals.
What is food chain ?A food chain is a network of links in a food web that begins with producer organisms and ends with an apex predator, detritivore, or decomposer species.
A food chain also demonstrates how organisms are related to one another through the food they consume. Each trophic level is represented by a different level of a food chain.
Producers can produce their own food and energy, but consumers are not the same. Consumers are living things that must hunt, gather, and eat their food.
Thus, Consumers must eat in order to gain energy, or they will perish. Omnivores, carnivores, herbivores, and decomposers are the four types of consumers.
To learn more about the food chain, follow the link;
https://brainly.com/question/16065961
#SPJ6
Which is an example of a nonaqueous solution?
gasoline
fog
mayonnaise
fruit juice
Answer: Gasoline
Explanation: Siri said so
The non-aqueous means it does not contain water. Among the given options gasoline is an example of a non-aqueous solution. The correct option is A.
What is a non-aqueous solution?The solution which is obtained by dissolving solute in any liquid other than water is defined as the non-aqueous solution. If solute is dissolved in solvent like benzene, alcohol, ether, carbon disulphide, acetone etc. forms a non aqueous solution.
The major difference between the aqueous and non-aqueous solution is that the solvent of an aqueous solution is water whereas in non-aqueous solutions, the solvent is any substance other than water.
The solvent of non-aqueous solution can be polar or nonpolar and depending on the polarity the solutes dissolve in the solvent. Here gasoline is an example of the non-aqueous solution. The gasoline is a crude oil which does not include water as an ingredient.
Thus the correct option is A.
To know more about non-aqueous solution, visit;
https://brainly.com/question/4992250
#SPJ7
That big lorry hit the new car.change to passive voice
what conditions would produce the highest pressure?
air that is cooling will cause the highest pressure
Explanation:
This is because heat has to escape a certain area and if the heat can't escape then more and more pressure will build up in a area.
Definition: This is the energy that comes to Earth from the Sun.
Example: using the sun to dry your laundry hanging on the clothesline
Answer:
well to me it is called natural energy
Which pH is the most acidic
Answers choices below
A. 7
B. 14
C. 0.5
D . 1
C. 0.5
This is the answer.
(assuming that the D option is 1, if it is 0.1 then the answer is 0.1)
[tex]0.5[/tex]
Explanation:
As you know that decreasing in the concentration of OH- (i.e., 14, 13, 12, 11,..) makes to increase in the concentration of H+ ions (5,4,3,2,1).
How is primary selection different from secondary succession?
Answer:
Explanation:
Primary and secondary succession occur after both human and natural events that cause drastic change in the makeup of an area. Primary succession occurs in areas where there is no soil and secondary succession occurs in areas where there is soil.
In primary succession, newly exposed or newly formed rock is colonized by living things for the first time. In secondary succession, an area previously occupied by living things is disturbed—disrupted—then recolonized following the disturbance.
Hope this helped :)
-Akito
24.
What is the molar mass of CO2?
Answer:
The molecular mass of carbon dioxide is 44.01amu