Based on the type or types of intermolecular forces, predict the substance in each pair that has the higher boiling point Given the molecules propane (C3H8) and n-butane (C4H10)_________ has the higher boiling point mainly due to_______ Given the molecules diethyl ether (CH3 CH2OCH2 CH3) and 1-butanol (CH3 CH2CH2 CH2OH) higher boiling point mainly due to______________ .

Answer:

Option (B) 3.

Explanation:

In the model represented above, the two extreme represent carbon atoms since no other group are attached to it. The joint at the middle also represent carbon atom.

Thus, we can write a more simplify illustration for the model above as

C—C—C

From the above illustration, we can see that the model contains 3 carbon atom.

Answer:

Molecules = 7.5 × 10²³ molecules

Explanation:

Given:

Moles = 1.25 mol

Avogadro's No. = [tex]N_{A}[/tex] = 6.022 * 10²³

Required:

Molecules = ?

Formula:

Molecules = Moles × [tex]N_{A}[/tex]

Solution:

Molecules = 1.25 × 6.022 × 10²³

Molecules = 7.5 × 10²³ molecules

Answer:

Homoanular dienes have a greater base value than heteroanular dienes

Explanation:

Woodward in 1945 gave a set of rules relating the wavelength of maximum absorption to the structure of a compound. These rules were modified by Fieser in 1959. These sets of rules describe the absorption of organic molecules in the UV region of the electromagnetic spectrum.

Each system of diene or triene has a given fixed value at which maximum absorption is expected to occur according to Woodward rules. This given fixed value is called the base or parent value. If the two double bonds are trans to each other, the diene is said to be transoid. If the two double bonds belong to different rings, the system is said to be heteroanular and the base value in each case is 215nm. If the double bonds are cis to each other (cisoid), or the two double bonds are in the same ring (homoanular), then the base value is 253nm.

Since λmax = base value + ∑ substituent contributions + ∑ other contributions, if the other contributions are not very significant, homoanular diene will have a greater λmax because of its larger base value compared to heteroanular diene. This correlates well with the fact that conjugated systems absorb at a longer wavelength.

Answer:

Wavelength, λ  = 6.7 x 10^-11 m

Explanation:

Frequency and wavelength are inversely proportional to each other.

In this problem;

f =  4.5 x 10^18 Hz

wavelength, λ = ?

Speed of light, c = 3 x 108 m/s.

These variables are related by the following equation;

c = λ * f

Making λ subject of focus, we have;

λ = c / f

λ = 3 x 10^8 / 4.5 x 10^18

λ  = 0.67 x 10^-10

λ  = 6.7 x 10^-11 m

Answer: Manganese(II)bromide

Explanation:

Because it is a chemical compound composed of manganese and bromine

Answer:

D. pollution

Explanation:

Increase in ocean temperature is one of the major consequence of global warming which directly leads to rise in sea level,  coral bleaching and ocean deoxygenation.

Warming ocean temperatures do not leads to pollution directly whereas pollution leads to warming ocean temperatures. So, in the case of pollution, the effect is opposite.

Hence, the correct option is D.

Answer:

Water is used as a solvent.

Explanation:

In order to purify the new molecule, recrystallization occurs in which the new molecule should be added in water and heated the water in order to increase the solubility of the solution. The new molecule dissolve in water while the impurity remains undissolved which can be removed from the solution and then remain the solution to be cold down and the new molecule will again undissolved and the molecule can be extracted without any impurities. We use water instead of ethanol due to lower solubility.

Answer:

[tex]\rho = 9.78\frac{g}{cm^3}[/tex]

Explanation:

Hello,

In this case, in order to compute the density of bismuth we need to apply the formula:

[tex]\rho =\frac{m_{Bi}}{V_{Bi}}[/tex]

Nonetheless, the volume is computed by the difference:

[tex]V_{Bi}=48.6-46.3=2.30cm^3[/tex]

Therefore:

[tex]\rho = \frac{22.5g}{2.30cm^300}\\\\\rho = 9.78\frac{g}{cm^3}[/tex]

Regards.

Answer:

(a) [tex]\% H_2O=10.65\%[/tex]

(b) [tex]\% H_2O=32.2[/tex]

Explanation:

Hello.

For this questions we must consider the ratio of the molar mass of water to  hydrated compound molar mass as shown below:

(a) In this case, we can consider that inside the manganese (II) sulfate monohydrate, whose molar mass is 169.02 g/mol, there is one water molecule that has a molar mass of 18 g/mol, for which the theoretical percentage of water is:

[tex]\% H_2O=\frac{18g/mol}{169.0g/mol} *100\%\\\\\% H_2O=10.65\%[/tex]

(b) In this case, we can consider that inside the manganese (II) sulfate tetrahydrate, whose molar mass is 223.1 g/mol, there are four water molecules that have a molar mass of 4*18 g/mol, for which the theoretical percentage of water is:

[tex]\% H_2O=\frac{4*18g/mol}{223.1g/mol} *100\%\\\\\% H_2O=32.27\%[/tex]

Best regards.

Answer:

The number of moles of solute present in 4.00 L of an 8.30 M solution​ is 33.2

Explanation:

The Molarity (M) or Molar Concentration is the number of moles of solute per liter of solution; in other words it is the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units ([tex]\frac{moles}{liter}[/tex])  or M.

In this case:

Replacing:

[tex]8.30 M=\frac{number of moles of solute}{4 L}[/tex]

Solving:

number of moles of solute= 8.30 M* 4 L= 8.30 [tex]\frac{moles}{liter}[/tex] * 4 L

number of moles of solute =33.2

The number of moles of solute present in 4.00 L of an 8.30 M solution​ is 33.2

Answer:

33.2 is the answer

Explanation:

did the test already :)

Answer:

The total surface area of these N spherical droplets is 4.4929 m²

Explanation:

From the information given :

assuming that :

30 cm³ of gasoline is atomized into N spherical droplets &

each with a radius of 2.0 × 10−5 m

We are tasked to determine the total surface area of these N spherical droplets

We all known that:

[tex]1 \ cm^3 = 10 ^{-6} m^3[/tex]

Therefore

[tex]30 \ cm^3 = 30 * 10 ^{-6} m^3 = 3 *1 0^{-5} \ m^3[/tex]

For each droplet; there is a required volume which is = [tex]\dfrac{4}{3} \pi r ^3[/tex]  since it assumes a sphere shape .

Thus;

replacing radius(r) with 2.0 × 10−5 m; we have:

[tex]= \dfrac{4}{3} \pi * (2.0 *10^{-5} m) ^3[/tex]

= [tex]3.35 * 10^{-14} \ m^3[/tex]

However; there are [tex]3*10^{-5} \ m^3[/tex] gasoline atomized into N spherical droplets with each with radius 2.0 × 10−5 m

For N ; we have ;

[tex]=\dfrac{3*10^{-5} \ m^3}{3.35 * 10^{-14} \ m^3/ droplet}[/tex]

= [tex]8.95*10^8 \ droplet s[/tex]

So; each droplet have a surface area = [tex]4 \pi r^2[/tex]

= [tex]4 \pi (2.0*10^{-5}m) ^2[/tex]

= [tex]5.02*10^{-9} \ m^2/droplets[/tex]

The surface area per droplet is equivalent to [tex]5.02*10^{-9} \ m^2/droplets[/tex]

Thus;

The total surface area of these N spherical droplets will be :

= [tex]8.95*10^8 \ droplet s * 5.02*10^{-9} \ m^2/ droplets[/tex]

= 4.4929 m²

The total surface area of these N spherical droplets is 4.4929 m²

Answer:

thickness of the gold sheet = 4.74 * 10⁻⁶ cm

Explanation:

mass of gold sample = 1.2 oz,; area of rectangular gold sheet = 400 sq. ft

Converting mass of gold from oz. to g

1 oz. = 28.35 g

mass of gold sample in grams = 1.2 * 28.35 g = 34.02 g

Converting from feet to cm;

1 feet  =  12 * 2.54 cm = 30.48 cm

1 sq. ft = (30.48)² = 929.0304 cm²

area of gold in cm² = 400 * 929.0304 cm² = 371612.16 cm²

Since the density of a solid is constant

Density = mass/volume

Volume = mass/density

where volume =area * thickness

therefore, area * thickness =mass/density

thickness = mass/(density * area)

substituting the value; thickness = 34.02 g/(19.3 gcm⁻³ *371612.16 cm²)

thickness of the gold sheet = 4.74 * 10⁻⁶ cm

Answer:

The incorrect statement from the options is OXIDATION IS A "GAIN" OF ELECTRONS

Explanation:

Oxidation in a redox reaction is the loss of electrons. It is also the increase in the oxidation states of an atom or ion or atoms in a molecule. A redox reaction is a type of chemical reaction in which there is a transfer of electrons from an atom or ion to another resulting in a change in oxidation states of the substances involved. The reducing agent in the reaction is undergoes oxidation by losing electrons while the oxidating agent is reduced that is it gains electrons at the end of the reaction. The atom or ion from which electron is lost is said to be oxidized while the other atom or ion involved in the reaction is reduced.

Oxidation is also the combination with O atoms and it is always accompanied by reduction because oxidation forms a half of the whole redox reaction. A substance cannot be oxidized except it has reduced another substance by losing electrons to it.

Answer:

[tex]1s^22s^22p^3[/tex]

Explanation:

Nitrogen has the atomic number = 7

So, No. of electrons = 7

Electronic Configuration:

[tex]1s^22s^22p^3[/tex]

Remember that:

s sub shell holds upto 2 electrons while p sub shell upto 6

Answer: The pH of the solution is 11.2

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in ml

moles of [tex]Ba(OH)_2[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{0.867g}{171g/mol}=0.00507mol[/tex]         (1g=1000mg)

Now put all the given values in the formula of molality, we get

[tex]Molarity=\frac{0.00507\times 1000}{170}[/tex]

[tex]Molarity=0.0298[/tex]

pH or pOH is the measure of acidity or alkalinity of a solution.

pH is calculated by taking negative logarithm of hydrogen ion concentration.

[tex]pOH=-\log [OH^-][/tex]

[tex]Ba(OH)_2\rightarrow Ba^{2+}+2OH^{-}[/tex]

According to stoichiometry,

1 mole of [tex]Ba(OH)_2[/tex] gives 2 mole of [tex]OH^-[/tex]

Thus 0.0298 moles of [tex]Ba(OH)_2[/tex] gives =[tex]\frac{2}{1}\times 0.0298=0.0596[/tex] moles of [tex]OH^-[/tex]

Putting in the values:

[tex]pOH=-\log[0.0596]=2.82[/tex]

[tex]pH+pOH=14[/tex]

[tex]pH=14-2.82[/tex]

[tex]pH=11.2[/tex]

Thus the pH of the solution is 11.2

Answer:

The third reaction

(2NaOH + NiCL2 ---> 2NaCl + Ni(OH)2)

Explanation:

By definition, a precipitation reaction refers to the formation of an insoluble salt when two solutions containing soluble salts are combined.

(Source: lumenlearning)

From the 4 options, we can eliminate the first and second one immediately because there is no formation of an insoluble salt.

Then, the last one can also be eliminated because even though there is insoluble solid formed, but it is not a salt, and, the reactants are not solutions too. In fact, the last one is a displacement reaction. A more reactive metal displaces a less reactive metal to form an ion.

Since the third reaction matches the definition of precipitation reaction, this is the answer.

Answer:

1.30atm

Explanation:

P1/T1 = P2/T2

1.07/393 = P2/478

Answer: the first one is correct

Explanation:

jhkfjfjgjgjjggj

Answer:

Exothermic interractive are the following: NaOH, KOH, CaCl₂

Endothermic interactive are the following: NaCl, NH₄NO₃, NaNO₃

Explanation:

NaOH, KOH, and CaCl2 are exothermic reactants. NaCl, NH4NO3, and NaNO3 are endothermic interacting substances.

Chemical processes that can release or absorb energy are referred to as endothermic. In endothermic reactions, more energy is used when bonds in the reactants are broken than is released when new bonds are formed in the products.

When the temperature of the an isolated system drops while the surroundings of the a non-isolated system warm up, this is known as an endothermic response. The heat of reaction is generally positive in endothermic processes (qrxn>0).

To know more about  endothermic reactions visit:

https://brainly.com/question/23184814

#SPJ2

Answer:

1.5 L  

Explanation:

If the gas is contained in a steel tank, the volume will remain constant when the temperature changes.

The volume will be 1.5 L.

Answer:

Mechanical to Heat

explanation:

The wood itself can make mechanical energy but when it's on fire it makes heat energy

Answer: Chemical to heat and light

Explanation: The energy transforms from chemical energy to heat and light energy. Because when the candle burns a chemical reaction occurs and produces heat and light.

Answer:

22.29%

Explanation:

Percent yield = experimental yield / theoretical yield * 100

= 12.89 / 57.82 * 100 = 22.29%

Answer:

They are also relatively soft metals: sodium and potassium can be cut with a butter knife.

Answer:A

Explanation:

Answer:

[A] = 1.438M = 1.4M (Two s.f)

Explanation:

Rate constant, k =  0.00317

Initial Concentration, [A]o = 1.44M

Final Concentration, [A] = ?

Time, t = 0.240 s

Since this is a second order reaction, the formula for this is given as;

1 / [A] = 1 / [A]o + kt

1 / [A] = 1 / 1.44 + (0.00317 * 0.240)

1 / [A] = 0.6944 + 0.0007608

1 / [A] = 0.6952

[A] = 1.438M = 1.4M (Two s.f)

Answer:

On the off chance that the wavelength(λ) maximum worth has been changed to 520 nm from 470 nm on the spectrophotometer, less light would be absorbed and in this way %T would be higher than the one found at 470 nm. The wavelength utilized at 520 nm isn't adequate for the excitation and consequently lesser light is absorbed by the arrangement.

Explanation:

A spectrophotometer is an analytical equipment used to quantitatively gauge the transmission(passage) or impression of visible light, UV light or infrared light through a medium.

Transmittance (τ) is the ratio of the brilliant or luminous flux at a given wavelength that is transmitted to that of the incident radiation.

where, Keq is the equilibrium constant.

On the off chance that the wavelength(λ) has been changed to 520 nm from 470 nm on the spectrophotometer, less light would be absorbed and in this way %T would be higher than the one found at 470 nm.

A spectrophotometer is an analytical equipment used to quantitatively gauge the transmission(passage) or impression of visible light, UV light or infrared light through a medium. Transmittance (τ) is the ratio of the brilliant or luminous flux at a given wavelength that is transmitted to that of the incident radiation. The wavelength utilized at 520 nm isn't adequate for the excitation and consequently lesser light is absorbed by the arrangement. As the concentration goes up, more radiation is absorbed and the absorbance goes up. Therefore, the absorbance is directly proportional to the concentration.

Find more information about Transmittance here: brainly.com/question/14919298

Answer:

The potential difference between the cathode and anode are set up from the chemical reaction. Inside the battery electrons are pushed by the chemical reaction toward the positive end creating a potential difference. It is this potential difference that drives the electrons through the wire.

Answer:

The lewis structure of the compounds can be drawn by making the skeleton of the molecule first. Then the different atoms are arranged and the electrons are arranged in their bonding pattern. The lone pair of the atoms, which are not involved in the bonding are represented by the dots.

So the lewis structures of both the compound methyl mercaptan has been in the attached image:

Spelling of methyl metcaptain is wrong, the correct spelling is methyl mercaptan.

Answer:

Methyl mercaptan is also known as Methanethiol with the chemical formula  CH3SH and it is an organosulfur compound.

For lewis structure of methyl mercaptan (CH3SH), there are total 14 valence electrons. Four hydrogen atoms has one valence electron each, carbon has four valence electrons and sulfur has six valence electrons. Carbon form one bond with three hydrogen atoms by sharing one electron with each, carbon form one single bond with sulfur atom by sharing one electron with it and sulfur form one single bond with hydrogen. Sulfur left with four unpair electrons.

Answer:

See explanation

Explanation:

For the first part of the question, we have to check the chiral carbons in 4-methyl-1,2-cyclohexanediol. In this case carbons, 1 and 2 are chiral, if we have 2 chiral carbons we will have 4 isomers. We have to remember that formula 2^n in which "n" is the number of chiral carbons, so:

2^n = 2^2 = 4 isomers

And the isomers that we can have are:

1) (1R,2S)-4-methylcyclohexane-1,2-diol

2) (1S,2S)-4-methylcyclohexane-1,2-diol

3) (1S,2S)-4-methylcyclohexane-1,2-diol

4) (1S,2R)-4-methylcyclohexane-1,2-diol

See figure 1

For the second part of the question, we have to remember that the oxidation with [tex]OsO_4[/tex] is a syn addition. In other words, the "OHs" are added in the same plane. In this case, we have the methyl group with a wedge bond, so the "OH" groups will have a dashed bond due to the steric hindrance. Due to this we only can have 1 isomer ((1S,2R,4S)-4-methylcyclohexane-1,2-diol). Finally, on this molecule, we dont have any symmetry planes (this characteristic will cancel out the optical activity), so the product of this reaction has optical activity.

See figure 2

I hope it helps!

Answer:

empirical formula = CH2O

molecular formula = C2H4O2