barium chloride + sodium phosphate 
Answer with double replacement

Answer:

[tex]Zn(s)+2H^+(aq)\rightarrow Zn^{2+}(aq)+H_2(g)[/tex]

Explanation:

Hello!

In this case, since writing the net ionic equation implies the complete molecular equation, we should start by:

[tex]Zn(s)+2HBr(aq)\rightarrow ZnBr_2(aq)+H_2(g)[/tex]

Next, we represent the ionization of the aqueous species:

[tex]Zn(s)+2H^+(aq)+2Br^-(aq)\rightarrow Zn^{2+}(aq)+2Br^-(aq)+H_2(g)[/tex]

Whereas the spectator ions, those at both reactants and products are cancelled out so the net ionic equation is obtained:

[tex]Zn(s)+2H^+(aq)\rightarrow Zn^{2+}(aq)+H_2(g)[/tex]

Best regards!

Answer: D) 1.30 and 2.60

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in ml

molarity  of [tex]MgCl_2[/tex] = [tex]\frac{0.325\times 1000}{250ml}=1.30 M[/tex]

[tex]MgCl_2\rightarrow Mg^{2+}+Cl^{-}[/tex]

As 1 mole of [tex]MgCl_2[/tex] dissociates to give one mole of [tex]Mg^{2+}[/tex] and two moles of  [tex]Cl^-[/tex] ions .

Molarity of [tex]Mg^{2+}[/tex] = 1.30 M

Molarity of [tex]Cl^{-}[/tex] = [tex]1.3 M\times 2=2.60M[/tex]

Answer:

2.64g of CO₂ are produced

Explanation:

The reaction of hexane with O₂ is:

C₆H₁₄ + 19/2O₂ → 6CO₂ + 7H₂O

To solve this question, we must convert each mass of reactant to moles in order to find limiting reactant and, with the chemical reaction we can find the moles of carbon dioxide produced and the maximum mass produced:

Moles hexane -Molar mass: 86.18g/mol-:

0.862g * (1mol / 86.18g) = 0.01 moles

Moles Oxygen -Molar mass: 32g/mol-:

5.1g * (1mol / 32g) = 0.16 moles

For a complete reaction of 0.01 moles of hexane there are required:

0.01moles hexane * (19/2 Oxygen / 1mol Hexane) = 0.095 moles oxygen

As there are 0.16moles, limiting reactant is hexane.

0.01 moles of hexane produce:

0.01 moles * (6 moles carbon dioxide / 1 mole hexane) = 0.06 moles of CO₂.

The mass is -Molar mass CO₂: 44g/mol-:

0.06 moles of CO₂ * (44g/mol) =

Answer:

A. When a piece of copper is heated, it combines with oxygen to form copper oxide. The chemical reaction for the same is as follows:

              2 Cu (s) + O2(g) => 2CuO

B. The mass of the piece of copper will remain same and there will be no change in its mass. However, its volume will increase, so its density will decrease.

C. This is so because heating copper in its elemental form is a physical change and there is no change in mass during a physical change. Hence, the mass of copper remain same.

Answer: Magnesium

Magnesium, in its elemental form, has 12 protons and 12 electrons. The neutrons are a different matter. Magesium's average atomic mass is 24.305 atomic mass units, but no magnesium atom has exactly this mass.

Hope this helps....... Stay safe and have a Merry Christmas!!!!!!!! :D

Answer:

Mitosis

Mitosis is a method of cell division in which a cell divides and produces identical copies of itself.

Explanation:

Answer:

Barium carbonate powder is stirred add pulp in the entry, the vitriol that the adds solubility then reaction that makes the transition is filtered and is obtained the barium sulfate filter cake and liquid after the transition.

Answer:

Explanation:

What occurs here (the description in the question) is condensation. Condensation is the process in which water changes from it's gaseous state (steam) to it's liquid state. When the hot air leaves the oven, and it touches/ passes through the glasses of John (that is of a lower thermal energy), the hot air would lose some of it's thermal energy (due to the lower thermal energy of the glasses) and then transits back to liquid forming the visible fog steam on the glasses.

This question is incomplete, the complete question is;

A 1.00 g sample of NH4NO3 is decomposedin a bomb calorimeter. The temperature increases by 6.12°C. What is the molar heat of decomposition for ammonium nitrate?

Molar mass, NH4NO3 80.0 g/mol

Calorimeter Constant   1.23 kJ/°C

Answer:

the molar heat of decomposition for ammonium nitrate is - 602.4 kJ/mol

Explanation:

Given that;

change in temperature ΔT = 6.12 °C

Calorimeter Constant C = 1.23 kJ/°C

Molar mass, NH4NO3 = 80.0 g/mol

we know that;

Heat gained by the calorimeter (Q1) = Heat lost by the decomposition of NH4NO3 (Q2)

Q1 = C × ΔT

Q1 = (1.23 kJ/K) × (6.12 K) = 7.53 kJ

Q value we get becomes negative since we are talking about reaction and not calorimeter

hence

Q1 = - 7.53 kJ

now

1 g NH4NO3 decomposed, - 7.53 kJ of heat is released

so if 80 g which is 1 mol NH4NO3 decompose, the heat will be;

(80 g/mol x -7.53 kJ) / 1 g = - 602.4 kJ/mol

Therefore the molar heat of decomposition for ammonium nitrate is - 602.4 kJ/mol

Answer:

it contains O3, therefore making it an oxide

Answer:

iron (11) oxide

Explanation:

Answer:

a risk to human health or the environment arising from biological work, especially with microorganisms.

Explanation:

Answer:

They need more oxhygen to fraction to incresse

Explanation:

Answer:

In a climatological sense, dryness is a function of both annual rainfall and evaporation

Answer:A

Explanation:Binary Fission, meaning ‘getting divided into half’ is a type of asexual reproduction where a single living cell grows twice its size and then splits to form two identical daughter cells, each carrying a copy of the parent cell’s genetic material. Examples of cells that use binary fission for division

Answer:

i think its a

Explanation:

Answer:

2.9 g/cm³

Explanation:

From the question given above, the following data were obtained:

Mass = 236.376 g

Volume = 81.5 cm³

Density =?

Density can be defined as the mass of a substance per unit volume of the substance. It can be expressed mathematically as:

Density = mass /volume

With the above formula, we can obtain the density of the object as shown below:

Mass = 236.376 g

Volume = 81.5 cm³

Density =?

Density = mass /volume

Density = 236.376 / 81.5

Density = 2.9 g/cm³

Thus, the density of the object is 2.9 g/cm³

Answer:68.57

Explanation:

Answer:

C. The reaction rate at known reaction concentrations

Explanation:

The rate of a reaction is the measure of the speed of a chemical reaction. To find the rate constant of a reaction, the concentration of the reactants must be known.

Answer:

C. ApE x Approved

Explanation:

Trust

Answer:

Add Items to it

Explanation:

Lol I took the test. Sorry If I'm incorrect

Answer:

add items to the box to increase its mass on the self it is on

Explanation: :p

Answer:

d) none of the above

Explanation:

The law that describes the relationship between pressure and volume of an ideal gas (under constant temperature and amount of substance) is Boyle's law.

It states that pressure is inversely proportional to the volume. This would mean that a graph of P vs 1/V would be a line.

See the attached picture for a graph of P vs V.

A plot of pressure VS. volume for an ideal gas will result in d) none of the above

The following things should be considered:

Therefore we can conclude that a plot of pressure VS. volume for an ideal gas will result in d) none of the above

Learn more: brainly.com/question/23334479

Answer:

Compound 1: Carbon Dioxide (CO_2)

Compound 2: Water (H_2 O)

Compound 3: Potassium Nitrate (KNO_3)

Compound 4: I am unsure

Compound 5: Calcium Sulfate

Explanation:

Answer:

69.09 g

Explanation:

First we calculate the mass of the sample of concentrated H₂SO₄, using the given volume and density:

There are 70.288 grams of solution, of which 98.3% is H₂SO₄. Thus the H₂SO₄ mass is:

Taking into account the definition of density and percentage by mass, the mass of H₂SO₄ in a 38.2 cm³ sample of concentrated sulfuric acid is 69.09 grams.

But first you must know the definition of density. Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.

In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance. Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

[tex]density=\frac{mass}{volume}[/tex]

In this case, you know that:

Density= 1.84 [tex]\frac{g}{cm^{3} }[/tex]

Volume= 38.2 cm³

Replacing in the definition of density:

[tex]1.84 \frac{g}{cm^{3} }=\frac{mass}{38.2 cm^{3} }[/tex]

Solving:

mass= 1.84 [tex]\frac{g}{cm^{3} }[/tex]×38.2 cm³

mass= 70.288 g

So, the mass of the solution is 70.288 grams.

The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]

In this case, you know:

percentage by mass=98.3%

mass of solute= ?

mass of solution= 70.288 grams

Replacing in the definition of percentage by mass:

[tex]98.3=\frac{mass of solute}{70.288 grams}x100[/tex]

Solving:

[tex]\frac{98.3}{100} =\frac{mass of solute}{70.288 grams}[/tex]

[tex]0.983=\frac{mass of solute}{70.288 grams}[/tex]

0.983× 70.288 grams= mass of solute

69.09 grams= mass of solute

The mass of H₂SO₄ in a 38.2 cm³ sample of concentrated sulfuric acid is 69.09 grams.

Learn more about

density:

brainly.com/question/952755?referrer=searchResults

brainly.com/question/1462554?referrer=searchResults

percentage by mass:

brainly.com/question/18646836?referrer=searchResults

Answer: You should be able to find the answer on the internet

Answer:

The picture represents oxygen.

Explanation:

There are two notable ways you can figure this out:

1) Since there are eight protons, you can automatically know that you are looking for an element with an atomic number of 8. This is because the atomic number is the number of protons in an atom.

2) You can also note the number of electrons on the outer shell. These are called valence electrons. You can then see that the element has 6 valence electrons. Beginning with Lithium on the periodic table and count by ones going from left to right in period 2 of the periodic table until you get to 6. What element is that? It is indeed oxygen.

Answer:

Oxygen

Explanation:

Neons contain 8 protons and 10 ELECTRONS

Boron contains 5 protons an 5 electrons

calcium contains 20 electrons an 0 protons

Answer:

the answer is hot,dense points; each smaller than an atom

Explanation:

the big bang theory was proposed to suggest the expansion of the universe by describing the origin of all components of the universe and its planetary bodies. its suggested that the whole universe was in a state of high temperature and highly dense points (which were smaller than atoms) but continuously expanded by cooling down which gave rise to the formation of subatomic particles, atoms, etc.

btw I found this on brainly

Answer:

The correct answer is 70.41 kJ ≅ 70.4 kJ

Explanation:

The heat required to sublimate the solid at its sublimation temperature is calculated by using the following formula:

heat = ΔHs x moles of substance

Where ΔHs is the heat of sublimation, which is known (32.3 kJ/mol).

So, we have to calculate the moles of substance. For this, we can divide the mass of substance by the molecular weight of substance (CO₂):

mass CO₂ = 96.0 g

molecular weight CO₂ = (12 g/mol x 1) + (16 g/mol x 2) = 44 g/mol

⇒ moles of CO₂ = mass CO₂/molecular weight CO₂ = (96.0 g)/(44 g/mol) = 2.18 moles

Finally, we use the first formula to calculate the heat:

heat = ΔHs x moles = 32.3 kJ/mol x 2.18 mol = 70.41 kJ ≅ 70.4 kJ

Answer: synthesis, decomposition, single-displacement, double-displacement, combustion and acid-base reactions.

Explanation:

Answer:

Sn(C2H3O2)2

Explanation:

C2H3O2 is Acetate

Sn is tin

Acetate has a -1 charge

In order for tin to have a +2 charge, we need two acetates

So we write it as (C2H3O2)2

You just leave Sn blank because of the roman numeral and since it is a transition metal.

So the answer is Sn(C2H3O2)2

Answer:

[tex]\boxed {\boxed {\sf Sn (C_2 H_3 O_2)_2}}[/tex]

Explanation:

First, find what tin and acetate is.

Next, find the charge on acetate, which is -1.

The Roman Numeral 2 in parentheses after tin (II), signifies that the tin has a charge of +2.

We need to balance the charges, so they will equal 0.

The best way to balance is by using 2 acetate molecules

If we want 2 acetate molecules, we must add a subscript of 2 after acetate.

Add the tin (Sn) in front

The formula for tin (II) acetate is Sn (C₂H₃O₂)₂