balance the following redox reaction if it occurs in acidic solution. what are the coefficients in front of h+ and fe3+ in the balanced reaction? fe2+(aq) + mno4-(aq) → fe3+(aq) + mn2+(aq)

The molar concentration of [tex] {SO_{4}}^{2 - } [/tex] is 2.4

Firstly understanding the concentration [tex] {SO_{4}}^{2 - } [/tex], which will be 3. Hence, each molecule will release three sulphate ions.

Molar concentration = number of moles ÷ volume of solution in litres

Molar mass of aluminium sulphate = 342 g/mol

Number of moles = 55/342

Performing division

Number of moles = 0.16

Molar concentration = 0.16/2

Performing division

Molar concentration = 0.8

Molar concentration of sulphate ions = 0.8 × 3

Molar concentration of sulphate ions = 2.4

Thus, the molar concentration is 2.4.

Learn more about molarity -

https://brainly.com/question/14469428

#SPJ4

Intermolecular forces can be used to estimate relative boiling points (IMFs).The relationship between the substance's vapor pressure and boiling point depends on the strength of the IMFs.

The point at which a liquid's vapor pressure equals the gas pressure above it is known as the boiled point of the liquid. The temperature that a liquid's vapor pressure equals one atmosphere is considered the liquid's typical boiling point (760 torr). The view from a distance. view from a distance of a bubble in hot water.

Boiling point and saturation temperature are synonyms. Sometimes the measurement's pressure serves as a definition for the boiling point. The standard boiling point was established by the International Alliance of Basic and Applied Chemistry (IUPAC) in 1982 as the temperature at which water boils at one bar of pressure.

To know more about boiling point visit :

https://brainly.com/question/2153588

#SPJ4

This sample of chromium-51 will degrade from 35 grams to 10 grams over the course of 84 days.

This energy found in an atom's nucleus, or core, is referred to as nuclear energy. All everything in the cosmos is made up of microscopic building blocks called atoms, and the nucleus is held together by energy. A compact nucleus of an atom has a tremendous amount of energy.

The United States, which will produce 771,638 GWh in nuclear energy in 2021, will be by far the greatest nuclear electricity generator, followed by China, which will produce 383,205 GWh. 56 reactors with a total power of 57,848 MWe and 438 reactors with such a net power of 393,333 MWe were operating as of August 2022.

To know more about Nuclear visit:

brainly.com/question/20714830

#SPJ4

When a material is cooled from a temperature of 225 ° c temperature to 25 oC, 160 j worth heat energy are released. H=0.17 J/g*C is the metal's specific heat capacity if its mass is 5.0 g.

Heat is the interchange of "thermal" energy caused by a temperature difference. Consider a system that is isolated and has two components that are initially running at different temperatures. Energy is transmitted from the large heat subsystem 2 to the cooler temperature subsystem 2.

Atoms and molecules move more quickly and clash when the temperature rises, producing excess heat (also known as heat energy). The energy that comes from a heated substance's temperature is known as thermal energy.

=160 J released

=5.0 g metal

=A temperature change of (225-35) or 190C.

=160J/(5.0g*190C) = 0.1684 J/g*C

To know more about heat visit:

https://brainly.com/question/16555534

#SPJ4

An acid is more acidic than its conjugate base if its pKa value is less than or equal to seven.

A weak acid and its conjugate base are present in high amounts in buffer solutions (or a weak base and its conjugate acid). Buffers are extremely resistant to fluctuations in pH because these ingredients may neutralize extra H+ or OH.

In buffers, basic species are present to neutralize H + ions and acidic species to do the opposite. These two species must, nevertheless, be able to coexist in a solution without fully negating one another.

Learn more about buffer solutions here:

https://brainly.com/question/24262133

#SPJ4

A 3-carbon dicarboxylic acid called malonate is linked to Coenzyme A in malonyl CoA. Using the biotin cofactor of the enzyme acetyl-CoA carboxylase, malonate is created from acetyl-CoA by adding CO₂ .

Acetyl-CoA carboxylase (Acc1p) produces malonyl-CoA, which is produced as the first and only step in the production of fatty acids. The activity of Acc1p is closely controlled both transcriptionally and post-translationally, and Snf1p protein kinase phosphorylation of Acc1p inhibits its activity.

All forms of PKSs use malonyl-CoA as an extender unit. Malonyl-CoA is always incorporated into the developing polyketide through a decarboxylative Claisen condensation between the carboxyl group of a thioester and the enolate ion produced by malonyl-decarboxylation. CoA's .

Although CO2 or HCO3 are not absorbed into the fatty acids, the need for carbon dioxide as a bicarbonate ion is a crucial component in the production of fatty acids. This indicates a method where CO2 is initially given to a precursor, serving its role, and then eventually withdrawn.

Learn more about fatty acid synthesis visit :

https://brainly.com/question/29656853

#SPJ4

Sodium thiosulfate, also known as Na2S2O3, is a reducing agent that interacts with any remaining oxidizing agent to quench it. (Thus, the name thiosulfate, which is similar to sodium sulfate with one O changed to a S.)

The inorganic chemical sodium thiosulfate has the formula Na2S2O3xH2O. Usually, it can be found as the pentahydrate Na2S2O35H2O, which is white or colorless. The solid is a well-dissolving efflorescent crystalline material.

Some of the negative effects of cisplatin may be mitigated with sodium thiosulfate. When treating cyanide poisoning in an emergency, it is additionally combined with another medication.

Hypo is an acronym for one of sodium thiosulfate's historically more popular names, hyposulfite of soda. A significant inorganic salt with numerous medical applications is sodium thiosulfate. It is also referred to as "hypo" sodium hyposulfite.

To know more about Sodium thiosulfate visit

https://brainly.com/question/10691975

#SPJ4

Answer:

fractional bond orders

Explanation:

because fractional bond orders

Temperature after 40 minutes is 12.15 degree C

T= [tex]Ce^{kt}[/tex] +Ts

Setting T=T0 (initial temperature of cold drink) at t=0 then we have

T0= [tex]Ce^{0}[/tex]+ Ts ⟺ C=T0−Ts

Now, we have

T=(T0−Ts)ekt+Ts

ekt=T−TsT0−Ts

t=1kln(T−TsT0−Ts)(1)

Given condition: Temperature rise of cold drink from T0=5∘ C→T=10∘ C in time t=25 minutes & Ts=20 degree celsius substituting values in (1) we get

25=1kln(10−205−20)

k=125ln(23)

a) Temperature T after t=40 minutes, setting corresponding values in (1), we get

40=1125ln(23)ln(T−205−20)

ln(20−T15)=4025ln(23)

20−T15=(23)8/5

T=20−15([tex]2/3^{8/5}[/tex]) ≈ 12.15 degree C

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature)

Learn more  about  temperature here:

https://brainly.com/question/15354399

#SPJ4

Use the half-life calculator to analyze radioactive decay the substance will have decayed after the time the half-life has elapsed.

Radionuclides or radioactive substances are a class of chemical compounds where the nucleus of the atom is risky. They obtain balance via changes in the nucleus's spontaneous fission, emission of alpha debris, or conversion of neutrons to protons or the reverse.

Radon is a radioactive gasoline that has no color, odor, or flavor. Radon comes from the decay of uranium, which is a radioactive detail found naturally within the Earth's crust. Over billions of years, uranium decays into radium, and finally into radon.

Radioactive sources are used to observe dwelling organisms, diagnose and deal with diseases, sterilize clinical units and food, produce energy for heat and electric electricity, and to screen diverse steps in all types of business methods.

Learn more about radioactive substances here:-https://brainly.com/question/1160651

#SPJ4

25% of carbon dioxide gas is produced. when 6. 000 moles of c8h18 and 3. 000 moles of o2 react to produce 28. 16 g of co2.

The meaning of percent yield

The actual yield is calculated as the theoretical yield multiplied by 100 to get the percent yield. Actual Yield / Percent Yield Theory Yield) = 100% There are various reasons why a chemical reaction's actual yield could be lower than its theoretical yield; these will be covered in more detail in later chapters of the course.

What does a high yield percentage indicate?

Yield percentages might range from more than 100% to less than 100%. A higher yield % can be a sign that there is water in your product, too much reactant, or other contaminants. decreased percent

Briefing:

Theoretical mass of

co2= no.of moles×molecular mass of co2=2.56mol*44g/mol=112.64g

Experimental mass of co2 = 28.16 g

percentage yield=28.16*100/112.64=25%

To know more about percentage yield visit:

https://brainly.com/question/17042787

#SPJ4

1.25atm is the pressure required to compress 250l of helium gas.

The chemical element helium has the atomic number 2 and the symbol He. It is the first member of the noble gas group in the periodic table and is a colourless, odourless, tasteless, non-toxic, inert, monatomic gas. Of all the elements, it has the lowest melting and boiling points.

The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure.

Calculations:

Here the temperature is constant.

Given

P1 = 1atm

V1 = 250L

P2 = ?

V2 = 2 L

Hence,

P1V1 = P2V2

P2 = P1V1/V2

P2 = 250L × 1atm/200L = 1.25atm.

Hence, 1.25atm is the pressure required to compress 250l of helium gas.

To know more about Helium gas, check out:

https://brainly.com/question/28302901

#SPJ4

Pb²⁺ (aq) + 2Br(aq) → PbBr₂ (s) is the correct net ionic equation for the given reaction.

When equal volumes of 0.2M solutions of lead(II) nitrate and potassium bromide are combined, it forms a yellow precipitate of lead (II) bromide . This reaction is an example of a double displacement reaction.

A double replacement reaction is a chemical reaction in which mutual exchange of cations and anions of the reactants take place to form two different products. Usually, precipitates are formed in this reaction.

The reaction between  lead(II) nitrate and potassium bromide takes place as follows:

Pb(NO₃)₂ (aq) + 2KBr (aq) → PbBr₂ (s) + 2KNO₃ (aq)

By splitting the electrolytes into ions we get the complete ionic equation which is written as:

Pb²⁺ (aq)+ 2NO₃⁻(aq) + 2K⁺(aq) + 2Br⁻(aq) → PbBr₂(s) + 2K⁺(aq) +2NO₃⁻(aq)

By cross eliminating the ions on both sides of the reaction , we get the net ionic equation which is given as:

Pb²⁺ (aq) + 2Br⁻(aq) → PbBr₂(s )

Hence option (A) is the correct net ionic equation for the given reaction.

To know more about net ionic equation here

https://brainly.com/question/17462630

#SPJ4

The partial pressure in atm of O2 is 0.47 atm

What do you mean by moles?

A mole is simply a unit of measurement. In fact, it's one of the seven base units in the International System of Units (SI). Units are invented when existing units are inadequate. Chemical reactions often take place at levels where using grams wouldn't make sense, yet using absolute numbers of atoms/molecules/ions would be confusing, too. So, scientists invented the mole to bridge the gap between very small and very large numbers.

No. of moles of Rn = 0.220 moles

No. of moles of O2 = 0.350 moles

No. of moles of Ar = 0.640 moles

Total no. of moles = 1.21 moles

Mole fraction of O2 , xO2 = 0.350moles  / 1.21 moles = 0.289

Total pressure = 1.65 atm

Partial Pressure of O2 = Mole fraction of O2* Total Pressure

                                    = 0.289 * 1.65 atm

                                    = 0.47 atm

To know more about moles from the given link:

https://brainly.com/question/21911991

#SPJ4

The formula for the reaction between NaOH and HCl is NaOH + HCl = NaCl + H2O. So, the molar ratio of NaOH and NCl must be  neutralize the solution. So, we require 150 milliliters, or 0.3*50/0.1.

What is the value of a molar?

A chemical's molar mass is its mass in grams per mole. The quantity of atoms, molecules, and ions contained in a substance is measured in terms of moles. A mole of any substance contains 6.022 x 1023 molecules.

What precisely is a molar?

The molars, also called molar teeth, are large, flat teeth located near the back of the mouth. Animals that are mammals have advanced more. Usually used to pulverize food while it is being eaten. The word "molar" is Latin in origin.

To know more about molar number visit:

https://brainly.com/question/1482520

#SPJ4

In the provided query, bromine gas ([tex]\rm Br_2[/tex]) and sodium metal ([tex]\rm Na[/tex]) are produced when NaBr (Sodium bromide) is electrolyzed in an aqueous solution.

Electrolysis is the method of driving a non-spontaneous chemical reaction with an electric current.

In this reaction, sodium bromide is broken down into its constituent elements, bromine and sodium. Bromine is produced at the anode and sodium is produced at the cathode.

Overall reaction: [tex]\rm 2NaBr \rightarrow Br_2 + 2Na[/tex]

When NaBr(aq) is electrolyzed, the following reactions occur at the electrodes:

At the anode (positive electrode): Br- ions are oxidized to Br2 gas and electrons.

[tex]\rm 2Br^- \rightarrow Br_2 + 2e^-[/tex]

The reaction at the anode involves the oxidation of bromide ions to bromine gas.

At the cathode (negative electrode): Na+ ions are reduced to Na metal and electrons.

[tex]\rm 2Na^+ + 2e^- \rightarrow 2Na[/tex]

The reaction at the cathode involves the reduction of sodium ions to sodium metal.

Therefore, when NaBr(aq) is electrolyzed, bromine gas and sodium metal are produced.

Learn more about Electrolysis here:

https://brainly.com/question/33301115

#SPJ12

The formula mass of rubidium carbonate is rb2co3. Then  formula mass is  230.95a mu.

[tex]$\text { Wt } \text { of } R b & =85.4678$[/tex]

[tex]$\text { Wt } \text { of } c & =12.0107$[/tex]

[tex]$\text { Wt } \text { of } 0 & =16 $[/tex]

[tex]$\text { Wt } \text { of } R b_2 \omega_3 & =85.4678 \times 2+12.0107+16 \times 3$[/tex]

=230.946

so formula mass =230.95a mu.

The mass of a substance is given in atomic mass units and is calculated by adding the average atomic masses of all the atoms in the substance's chemical formula. The molecular mass is another name for a covalent compound's formula mass.

The total atomic masses of the component atoms of an ionic compound are used to define a substance's formula mass. This is typically used for ionic compounds, which are made up entirely of ions rather than distinct molecules. By summing the masses of each individual atom in the compound's formula, the formula mass is determined.

To learn more about formula mass visit:https://brainly.com/question/1363167

#SPJ4

the molecular geometry of the chf3 molecule is tetrahedral , and the molecule is polar.

Trifluoromethane, also known as fluoroform, is a compound with the molecular formula CHF₃.

This is because three fluorine atoms and one hydrogen atom are bonded to the central carbon atom, and the carbon atom has zero lone pairs. Therefore, the molecular structure and shape of CHF₃is tetrahedral.

A net dipole moment exists because the CHF₃molecule has three polar carbon-fluorine bonds. Therefore, CHF₃ is a polar molecule.

therefore,the molecular geometry of the CHF₃ molecule is tetrahedral , and the molecule is polar.

learn more about molecular geometry at https://brainly.com/question/13571293

#SPJ4

For the following radical, all the resonant structures listed in the options are correct.

The process of finding resonant structures for a given radical begins with drawing the Lewis structure of the radical. This includes connecting the atoms in the radical with single bonds and placing the lone electron pair on the atom with the highest electronegativity.

Once the Lewis structure is drawn, the radical can be examined to determine possible resonance structures. Resonance involves the movement of electrons to create different structures with the same overall charge and atom connectivity. In some cases, the lone electron pair may move to form a double bond or vice versa.

It is important to remember that resonance is a dynamic process, meaning that the electrons are constantly moving between the different structures. This means that all of the resonance structures should be drawn and considered when evaluating the resonance of a radical.

Once all of the resonance structures are drawn, the relative stability of each structure can be assessed. This is done by evaluating the formal charges of the atoms in each structure and determining which structure has the most stable charge distribution. The most stable resonance structure will usually be the one with the lowest overall formal charges.

Once the most stable resonance structure is determined, the other resonance structures can be assessed to determine the degree of resonance. The resonance energy of a radical is typically assessed by determining the difference in energy between the most stable resonance structure and the other structures.

Overall, finding resonant structures for a given radical involves drawing the Lewis structure of the radical, determining possible resonance structures, and evaluating the relative stability of each structure. By doing this, it is possible to identify the most stable resonance structure and determine the degree of resonance of the radical.

By doing so, we get all the given structures are resonant structures as they show homolytic cleavage of π bonds to the given radical. The image attached below gives a clear understanding of the resonance.

Hence, all the structres are correct.

To know more about the structure of benzene, click below:

https://brainly.com/question/19260725

#SPJ4

LEAST TO MOST POLAR- hexane,diethyl ether,acetone,n-propanol,water ,methanol

Considering the problem  we can say that the kids are compared to be more polar or smaller molecular weight compounds. The more polar compounds interact with silica more just as the kids bus stopped at every point and reached the destination late. Whereas, the adult bus is compared to be less polar compounds or high molecular weight which interacts less and reaches the destination faster.

Thus more polar compounds reaches the destination late whereas less polar compound reaches first.

find more:-https://brainly.com/question/13765692?referrer=searchResults

#SPJ4

Answer:

As more CO2 is absorbed into the oceans, the chemistry of the seawater changes. The pH of the seawater decreases, making it more acidic. This can have a negative effect on marine life, as many species are sensitive to changes in pH. Additionally, the increased acidity can cause the dissolution of calcium carbonate, which is an important component of coral reefs and other marine habitats.

In most circumstances, it is easier to calculate an enzyme's reaction velocity than to calculate the rate at which a SUBSTRATE disappears.

What role does an enzyme play? It is what?

Enzymes are made of proteins, which are the fundamental units of all living things. They serve as catalysts, accelerating metabolic reactions beyond what they would have done on their own. Simply said, without enzymes, such reactions wouldn't occur or would occur too slowly to support life.

What does the word "enzyme" actually mean?

A specific kind of biological catalyst called an enzyme is almost always a protein. It speeds up a particular chemical reaction in the cell. The enzyme is continually employed during the reaction and is not lost.

To know more about enzyme's reaction visit:

https://brainly.com/question/17320375

#SPJ4

Temperature will this same xenon gas sample have a volume of 3.33 l is 241.94k.

Charles' law states that the volume of a given amount of gas held at constant pressure is directly proportional to its Kelvin temperature. This means that as the temperature increases, the volume also increases, and vice-versa. The equation used to solve gas problems involving Charles' law is:

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

Rearrange the equation given above to isolate T2 . Insert your data into the new equation and solve.

[tex]T_2=\frac{V_2 T_1}{V_1}[/tex]

[tex]T_2=\frac{3.33 L\times 473\mathrm{~K}}{6.51 \mathrm{~L}}[/tex]= 241.94k

To learn more about Charles' law visit:https://brainly.com/question/16927784

#SPJ4

The concentration is 1.66x10-24 M if there is exactly one molecule of the solute in one litre of solution.

In this situation, 1 mole is defined as 6.02x10²³ particles, or molecules. As a conversion factor, consider the following:

1 mole = 6.02 x 10²³ molecules.

When only 1 molecule of the solute is present, use this conversion factor to determine moles of the solute:

1.66x10-24 moles are equal to (1 molecule)/((1 mole)/(6.02x1023 molecules)).

Only moles remain after the molecules cancel.

By definition, concentration is the number of moles of a solute per litre. Divide the volume, in this case 1.0L, by the 1.66x10-24 moles to get:

1.66x10-24 molar, or

1.66x10-24 M, = (1.66x10-24 moles solute)/(1.0 litre).

What is a molecule's chemical formula?

Subtract the compound's molar mass from the empirical formula mass. A whole number or a number very close to a whole number must be the result. Divide each subscript in the empirical formula by the full number from step 2 to get the result. The end outcome is the molecular equation.

To know more about Molecule visit:

brainly.com/question/1446104

#SPJ4

The volume when the pressure is increased to 90.0 mm hg is 9.33 L.

An ideal gas is a theoretical gas composed of many randomly transferring factor particles that aren't difficult to interparticle interactions. the best gasoline idea is beneficial because it obeys the precise gas law, a simplified equation of country, and is amenable to evaluation under statistical mechanics.

An ideal gas is described as one for which both the extent of molecules and forces between the molecules are so small that they have got no effect at the behavior of the gas. The real gas that acts almost like a really perfect gasoline is helium. that is due to the fact helium, in contrast to maximum gases, exists as an unmarried atom, which makes the van der Waals dispersion forces as low as viable

Using the ideal gas equation:-

Given;

P₁ =  80.0 mm hg

V₁ =  10.5 liters

P₂ = 90.0 mm hg

V₂ =

P₁V₁ =P₂V₂

V₂ = P₁V₁/P₂

    = 9.33 L

Learn more about ideal gas here:-https://brainly.com/question/20348074

#SPJ4

As per the question, the mass of the nitrogen gas m = 22.25 gram.

The latent heat of vaporization of nitrogen = 199.0 j/g

As per the question, the nitrogen gas will condense. During condensation, the nitrogen gas will lose or release heat equal to its latent heat.

Hence, the heat released by nitrogen gas Q = ml = 22.25 × 199.0 J                                                                           = 4427.75 J.

Hence, the amount of heat released will be 4427.75 J.

The formula: can be utilized to determine energy. Q = mc ∆T. In the equation, Q stands for energy expressed in joules or calories, m for mass expressed in grams, c for specific heat, and T for temperature change, which is the difference between the final temperature and the initial temperature. Water has a specific heat of 1 calorie/gram °C.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ4

The accumulation of acetaldehyde throught the consumption of alchol or by the use of the drug antabuse produces a feeling of hangover.

This is because acetaldehyde is toxic and can cause a variety of symptoms, such as headache, nausea, dizziness, fatigue and dehydration. It is also believed to be partly responsible for the alcoholic flushing reaction seen in some people. Acetaldehyde is also known to increase the risk of certain types of cancer, especially in heavy drinkers.

Is a colorless, flammable, and pungent-smelling chemical compound. It is a reactive intermediate in a wide range of metabolic processes, and it is also an important industrial chemical used in the production of pharmaceuticals, plastics, and other chemicals.

Acetaldehyde is also a toxic air contaminant and is classified as a probable human carcinogen.

Learn more about the acetaldehyde:

https://brainly.com/question/15149934

#SPJ4

If both electron affinity and heat of sublimation are smaller, then MX would be less stable.

M²⁺ + X⁻(g) → MX(s), + Lattice energy

Therefore, from the given thermodynamic cycle,

Lattice enthalpy = -100-800 = -900kJ/mol

Lattice enthalpy MX = -900kJ/mol

Enthalpy of the formation of MX is given as follows:

M(s) + 1/2X₂(g) --------->M(g) + 1/2 X₂(g)

Enthalpy of formation = +250 kJ

M(g) + 1/2X₂(g)  → M(g) +X(g)

Enthalpy of formation = +350 kJ

M (g) + X(g) ------> M²⁺(g), + X(g)

Enthalpy of formation = +400 kJ

M²⁺ (g) + X(g) 24→ M²⁺(g), + X(g)

Enthalpy of formation = +200kJ

M²⁺(g), + X⁻(g)→ MX(s)

Enthalpy of formation= +900kJ.

Enthalpy of formation of MX = 250 +350 +406-200-900 = -100 kJ

Therefore, Enthalpy of formation of MX = -100 kJ

Since electron affinities are the heat released while the heat of sublimation is the heat absorbed then if electron affinity decreases while the heat of sublimation, increases then the overall enthalpy of formation of MX will be less negative. Hence in that case MX would be less stable.

To know more about the heat of sublimation, click here:

https://brainly.com/question/14895394

#SPJ4

The procedures tells a student to measure 7.55 ml of solution 1 but the student measures 11.89 ml of solution 1. The percent by volume of extra liquid measure by the student added is 36.50%.

%(v/v)=(volume of solute/volume of solution)×100

In the given problem, the volume of solution is 11.89 ml and the volume of the solute is

volume of solute=(11.89-7.55)ml

volume of solute=4.34ml

We cannot consider the volume used to measure by procedure because the total volume is increased by extra addition of the solute. Plug all values in the formula

%(v/v)=(4.34 ml/11.89 ml)×100

%(v/v)=0.36501×100

%(v/v)=36.501%

%(v/v)=36.50%

Therefore, the concentration of a liquid measured by the student is 36.50 ml.

To know more about concentration

brainly.com/question/25256765

#SPJ4

The 5 electrons are present in the valence shell so group number 15 or VA or 5A electronic configuration ns^2 np^3, 4 electrons are present in the valence shell so the group number 14 or 1VA or 4 A electronic configuration ns^2 np^2.

What is an electron ?

The negatively charged components of an atom are known as electrons. All of an atom's electrons combine to form a negative charge that counteracts the positive charge of the protons in the atomic nucleus. In comparison to all the other components of the atom, electrons are quite tiny.

What is an  electron configuration?

The placement of electrons in orbitals around a nuclear nucleus is known as electronic configuration, also known as electronic structure or electron configuration.

A, 5 electrons are present in the valence shell so group number 15 or VA or 5A electronic configuration ns^2 np^3.

B, 4 electrons are present in the valence shell so the group number 14 or 1VA or 4 A electronic configuration ns^2 np^2

Therefore,  5 electrons are present in the valence shell so group number 15 or VA or 5A electronic configuration ns^2 np^3, 4 electrons are present in the valence shell so the group number 14 or 1VA or 4 A electronic configuration ns^2 np^2.

Learn more about electron from the given link.

https://brainly.com/question/25674345

#SPJ4