how much heat is required to heat a 18.4 g ice cube from –23.0 °c to –1.0 °c? specific heat of ice is 2.108 j/g °c.

True the major organic of the following reaction is optically active.

What is Optically active substance?

Optically active chemicals are those substances that have the ability to change (rotation) the polarisation plane of plane polarised light. Dextrorotatory compounds are those that rotate the plane clockwise (to the right).

What is the Polarization Plane?

The direction that lights with linear polarisation are polarised is indicated by the term "plane of polarisation."

It follows that True: The main optically active organic in the following reaction. 1. BH 3. THF 2. H2O2 4.NaOH .

To learn more about optically active

brainly.com/question/15892094

#SPJ4

Due to the oxygen from the air combining with the magnesium to form magnesium oxide, or MgO, the mass has increased.

The total mass of the magnesium increases when it is heated because magnesium combines with oxygen to generate magnesium oxide ( so it supported the hypothesis). It is oxygen that has caused the increased bulk.

Magnesium creates light intense enough to briefly impair your vision when it combines with oxygen. Magnesium burns so brightly because a lot of heat is released during the process. This exothermic process causes magnesium to donate two electrons to oxygen, resulting in the formation of powdered magnesium oxide (MgO).

Therefore, Due to the oxygen from the air combining with the magnesium to form magnesium oxide, or MgO, the mass has increased and hence the other 1.95 grams has come from oxygen.

To learn more about magnesium metal refer-https://brainly.com/question/20264445

#SPJ4

ΔH > 0, the process is endothermic; this is true about this reaction in which ammonium nitrate is dissolved in water

An endothermic reaction is a term used in chemistry to describe the chemical reactions in which the reactants absorb heat energy from the surrounding environment to produce the products

When cold packs are filled with water and ammonium nitrate, and the bag is squeezed then the water interacts with the chemical (ammonium nitrate) to initiate a reaction that decreases the temperature of the water to almost freezing. It can decrease inflammation and numb pain in the area because the icing is effective at reducing swelling and pain because the cold constricts blood vessels and decreases circulation to the area of inflammation.

To learn more about the endothermic reaction; click here:

https://brainly.com/question/3206251

#SPJ4

The pH of the solution after 73 minutes is 0.56.

Initial number of moles of H+ ions = molarity of solution × volume of solution = 0.552 × 1.25

             = 0.69

The concentration of H+ ions in solution will now decrease during the electrochemical process.

By applying Faraday's formula, we can determine that the number of moles of H(+) discharged at the electrode is given by n = Q/(z × F),

where Q = the total electric charge in Coulomb,

           F = the Faraday constant,

           z = the number of electrons transferred per ion = 1 (in this case)

We also know that Q = I × t

                                   = 11.4 × 73 × 60

                                   = 49932 C

∴ n = Q/(z × F)

     = (49932)/( 1 × 96500 )

     = 0.5174

The amount of H+ ions left in the solution is now equal to 0.69 - 0.5174 = 0.357 moles.

Then, molecularity of a solution is calculated as the number of moles divided by the volume of the solution = ( 0.357 / 1.25 ) = 0.2856 M.

Lastly, concentration of [H+] = 0.2856 M

∴ pH = -log [H+] = -log [ 0.2856 ] = -log [ 2856 × 10⁻⁴ ] = 0.56

So, pH is calculated 0.56 .

To learn more about pH, here :

https://brainly.com/question/10087107?referrer=searchResults

#SPJ4

In order for 0.36 mol of lead to totally react, 0.72 mol of Hydrochloric acid is required.

In the food, textile, metal, or rubber sectors, hydrogen chloride (HCl) is frequently employed as a bleaching agent to neutralize alkaline substances. When discharged into the soil, it is neutralized, and when it comes into contact with water, it hydrolyzes quickly.Low concentrations exposed over an extended period of time may damage and stain teeth. The EPA has not rated the carcinogenicity of hydrochloric acid.

Chemical burns from hydrochloric acid can be extremely painful if they come into contact with epidermis or other tissues. Ingestion of hydrochloric might result in blindness. The amount of acid present determines how severe the burns.

To know more about hydrochloric acid visit:

https://brainly.com/question/28353170

#SPJ4

In the balanced chemical reaction of MnO₂, the coefficient of H⁺ is 4.

Balanced chemical reaction

The chemical equations which have the same number and same type of each atom on both sides of the equation is known as balanced chemical equation. The coefficients in a balanced equation must be always the simplest whole number ratio. Mass is always conserved in chemical reactions i.e., neither destroyed nor created.

Balanced chemical reaction of MnO₂ is given as:

5MnO₂ + 4H⁺ → 3Mn₂ + 4H₂O + 2MnO₄⁻

Hence, the coefficient of H⁺ in the balanced chemical equation of reduction MnO₂ is 4.

Learn more about balanced chemical reactions from the link given below.

https://brainly.com/question/14152531

#SPJ4

Helicase would cease to function if the AMP-PNP was not hydrolyzed. ATP binding and hydrolysis cause conformational changes that allow helicase to unwind DNA.

Helicases are nucleic acid or nucleic acid protein complex binding enzymes that can also remodel them. There are helicases for both DNA and RNA. DNA helicases are required during DNA replication because they split double-stranded DNA into single strands, allowing each strand to be copied independently.

Helicases are a type of enzyme that is thought to be essential to all organisms. Helicases are motor proteins that use ATP hydrolysis to move directionally along a nucleic acid phosphodiester backbone, separating two hybridized nucleic acid strands. DNA helicases catalyze the dissolution of the hydrogen bonds that connect the two strands of double-stranded DNA. This energy-demanding unwinding reaction produces single-stranded DNA, which is used as a template or reaction intermediate in DNA replication, repair, and recombination.

To learn more about helicase, here

https://brainly.com/question/13543444

#SPJ4

The statements given in 1 and 3 are true about Buffer solutions.

Statement 1:

A buffer solution can be made by mixing equal concentrations of ​acetic acid and sodium acetate because in buffer solutions strong base should be less. Hence, here acetic acid is the weak acid and sodium acetate is the corresponding salt.

Statement 2:

A buffer solution can be made by mixing equal concentrations of ​hydrochloric acid and sodium chloride, this statement is false because no buffer solution can be made from strong acid like HCl.

Statement 3:

A buffer solution resists changes in pH when small quantities of acid ​or base are added to the solution and this is true.

Hence, the correct statements are 1 and 3.

Learn more about Buffer solutions from the link given below.

https://brainly.com/question/13077571

#SPJ4

Then, the dissolution process is endothermic. The solution has a positive 25.8 Kilojoules per mole specific heat. That will be equivalent to the solution's specific heat as its temperature drops.

(a) When a 4.25-g sample of solid ammonium nitrate dissolves in 60.0 g of water in a coffee-cup calorimeter ( the temperature drops from 23.0 C to 16.6 C . Calculate H (in kJ/mol NH4NO3) for the solution process shown below. Assume that the specific heat of the solution is the same as that of pure water. Hint: this process occurs at constant pressure. NH4NO3(s) --> NH4+(aq) + NO3-(aq) H = kJ/mol?

Answer and Explanation:

Given data:Mass of the ammonium nitrate

(NH4NO3) = 4.25 g

Mass of the water (H2O) = 60.0 g

Total mass of the mixture ( reactants) = Mass of the ammonium nitrate + Mass of the water

Total mass of the mixture ( reactants) = 4.25 g + 60.0 g = 64.25 g

Specific Heat (c) = 4.184 Jg/K

Drop in temperature (ΔT) = 23.0oC−16.6oC=6.4oC

1 Heat energy for the mixture

Q = m×c×ΔT

Here,

Q = Heat energy

m = mass of the mixture = 64.25 g

c = Specific Heat = 4.184 Jg/K

ΔT = 6.4oC

Q = 64.25g×4.184Jg/K×6.4oC

Q = 1720.4608 J

Q = 1.720 k J

2ΔH for the ammonium nitrate

ΔH = Q / Number of moles of the ammonium nitrate

Number of moles of the ammonium nitrate (n) = mass of ammonium nitrate / molar mass of ammonium nitrate

Mass of the ammonium nitrate = 4.25 g

Molar mass of the ammonium nitrate = 80g/mol

Number of moles of the ammonium nitrate (n) = 4.25/80

Number of moles of the ammonium nitrate (n) = 0.053125 moles

ΔH = Q/Number of moles of the ammonium nitrate

ΔH = 1.720kJ/0.053125mol

ΔH = 32.376 kJ/mol.

the endothermic response,Because the reaction is endothermic, meaning it takes energy from the environment in the form of heat, the beaker turns cold when ammonium nitrate is dissolved in water. As a result, the endothermic reaction of hydrating NH4NO3 causes the beaker to become cold.

Heat is released during an exothermic reaction, raising the temperature of the immediate environment. The surrounding is cooled through an endothermic process that absorbs heat.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ4

The correct answer is it is formed via the more/most stable carbocation.  

The following reaction occurs between unsymmetrical alkene (CH₃CH=CH₂) and unsymmetrical electrophilic reagent (H-Br) -

CH₃CH=CH₂ + H-Br → CH₃-CH(Br)-CH₃ + H₃C-CH₂-CH₂-Br

CH₃-CH(Br)-CH₃ is the primary product because it is formed via a secondary carbocation intermediate. In comparison, H₃C-CH₂-CH₂-Br is the minor product because it is created via a primary carbocation intermediate. The stability of secondary carbocation is higher as compared to the primary carbocation. These products are according to Markovnikov's rule.

The above discussion suggests that option C is the correct answer.

What is markovnikov's rule?

Markovnikov's rule states that when an asymmetrical reagent is added to an asymmetrical alkene, then the negative half of the reagent will attach to the carbon atom containing fewer hydrogen atoms.

Learn More about Markovnikov's Rule here :

https://brainly.com/question/28348492?referrer=searchResults

#SPJ4

In order to protect underground pipelines and storage tanks made of iron, the iron is made the cathode of a voltaic cell through a process called Impressed current method which is a kind of cathodic protection.

There are two methods which belongs to cathodic protection

a) one is by connecting the base metal with a more reactive metal and making the more reactive metal anode which sacrifices itself protecting the base metal [Iron in this case] : This is known as Sacrificial anodization protection

b) the second method is : Impressed current method where the base metal is connected to a battery in such a way that it starts behaving as cathode. This method is used in the given problem

learn more about cathode here:

https://brainly.com/question/4052514

#SPJ4

Oxidation originates at the surface of the metal and then it slowly penetrates through the surface.

As at the beginning exposed surface area is more therefore rate of oxidation is also more. After that, the process needed to occur inside the exposed surface of the metal, and the rate of diffusion decreases, so the rate of oxidation decreases.

It represents oxide layers that reduce the diffusion rate, therefore it is used for producing isolation shields for metals. Apart from that for covering a metal from the external environment or masking oxide layers are produced on metal surfaces.

Mass is a quantitative measure of inertia, an essential property of all dependents. It's far, in effect, the resistance that a frame of count number gives to a change in its speed or position upon the application of pressure. The more the mass of a frame, the smaller the alternate produced with the aid of a carried-out force.

Learn more about Mass here:-brainly.com/question/28021242

#SPJ4

Energy investment in the first stage of glycolysis requires glucose to be phosphorylated and cleaved to yield two molecules.

Glycolysis is a metabolic pathway that converts glucose into two molecules of pyruvate in the presence of oxygen or two molecules of lactate in the absence of oxygen.

The metabolic pathway that converts glucose to pyruvate is known as glycolysis. This free energy is used to create the high-energy molecules adenosine triphosphate and reduced nicotinamide adenine dinucleotide. Glycolysis is a series of ten enzyme-catalyzed reactions. The process occurs in a cell's cytoplasm and does not require oxygen. It can be found in aerobic and anaerobic organisms. Phosphorylation traps glucose with the help of the enzyme hexokinase.

To learn more about glycolysis, here

https://brainly.com/question/14076989

#SPJ4

Whipped cream is characterized as per it's characteristic and properties are based on  physical and chemical   :- Colloid  each mixture as a solution, colloid, suspension.

Creme or whipped cream Desserts and beverages frequently use chantilly as a garnish. The following desserts frequently use whipped cream as a spread or topping: Pies (particularly pumpkin pies and chocolate pies) (especially pumpkin pies and chocolate pies) an ice cream (especially ice cream sundaes) In a solid, liquid, or gaseous media, one or more components are distributed as relatively large solid particles or liquid droplets to form a mixture known as a colloid mixture. A colloid's particles are frequently electrically charged, remain scattered, and do not settle as a result of gravity.

Learn more about colloid here:

https://brainly.com/question/11640006

#SPJ4

The mole fraction of ethanol C₂H₅OH in an aqueous solution that is 46 percent ethanol by mass is 0.25.

Given that :

ethanol by mass is 46 % = 46 g

mass of water = 54 g

the moles of the ethanol, C₂H₅OH = mass / molar mass

                                                         = 46 / 46

                                                          = 1 mol

the moles of the water , H₂O = mass / molar mass

                                                = 54 / 18

                                                = 3 mol

the total moles = 1 + 3 = 4 mol

The mole fraction of ethanol , C₂H₅OH = moles / total moles

                                                                 = 1 / 4

                                                                 = 0.25

To learn more about mole fraction here

https://brainly.com/question/23716500

#SPJ4

Five electron groups are engaged in the triangular bipyramidal structure, resulting in sp3d hybridization. The orbital angles are 90° and 120°.

The result is that the VSEPR theory, in which three atoms give an electron pair and create a trigonal bipyramid with angles of 120° and 108°, can explain sp3d hybridization.

The only conceivable molecule geometry for sp3d hybridised centre atoms is trigonal bipyramidal. Trigonal bipyramidal shape is likewise the result if all bonds are present.

There is sp3d hybridization in SF4. Five bonds encircling a single phosphorus correspond to sp3d hybridization in PF5. Six bonds are arranged around one sulphur in SF6 to coincide with sp3d2 hybridization. As you can see, the hybridization produces the same amount of bondable hybridised orbitals regardless of the number of orbitals employed in the process.

To know more about orbital hybridization, visit:

brainly.com/question/24195443

#SPJ4

Orbiting electrons would emit light, The solar system model of the atom describes a situation in which the atom would collapse, Orbiting electrons would accelerate.

The elementary electric charge of the electron (eor -), a subatomic particle, is a negative one. Due to the fact that they are assumed to be elementary particles and lack any known components or substructure, electrons, which are a member of the first generation of the lepton particle family, are classified as such. The mass of an electron is around one-eighth that of a proton.  An intrinsic half-integer value angular momentum (spin) with units of the decreased Planck constant,, is one of the electron's quantum mechanical properties. The characteristics of both waves and elementary particles are shared by electrons. They are susceptible to particle collisions and to light-like diffractive effects. It is simpler to understand the wave characteristics of electrons.

Learn more about electrons here:

https://brainly.com/question/18367541

#SPJ4

The volume of this gas if placed at stp is 156.7 L.

What is mole?

The amount of substance that has the same number of chemical species (atoms, molecules, ions, etc.) as the number of atoms present in 12g of the carbon-12 isotope is referred to as a mole.

What is gas?

The intermolecular forces of attraction are even weaker than in the liquid form of matter in the gas state. The gas particles are spaced farther apart from one another. Given its kinetic energy, the molecule has weak intermolecular forces.

PV=nRT

V=30.4L

n=6.9 moles

T=335 K

R= 62.36 L.Torr/K.mol

Then,

P=(6.9molx62.36(L.Torr/K.mol)x335K)/30.4L

P=4741 Torr

At STP conditions are T=273.15 K and P=100kPa

Then, V=(6.9molesx273.15Kx8.314(L.KPa/K.mol))/100KPa

V=156.7 L

Therefore,  the volume of this gas if placed at stp is 156.7 L.

Learn more about mole from the given link.

https://brainly.com/question/1427235

#SPJ4

45 grams are equal to the mass of the solution multiplied by 100, or the mass of NaCl. We can sell them for 295.0 grams times 100 points and receive 15.25 percent of the sale price. The result is that the concentration of NaCl in the solution, which is 8 percent, is 15.25 percent.

You will have 25 g of solute in 100 g of solution since you have 50 g in 200 g of solution. According to the definition given above, this solution is 25% by mass.

One of three methods can be used to calculate this percentage: either the volume of the solute divided by the volume of the solution, the mass of the solute divided by the volume of the solution, or any combination of this solution.

To know more about Concentration in mass percentage here:

brainly.com/question/13959665

#SPJ4

When the gas emits at a rate that is 0. 667 times that of CO₂, it has a molar mass of 62.9 g/mol.

Graham's Law states that a gas's rate of effusion is inversely related to the square root of its molar mass.

√[M(b)/M(a)] = R(a)/R(b)

R is the effusion rate.

square root = sqrt = √

the molar mass, M

Square root of R(a)/R(CO) is √[M(CO)/M(a)].

(0.667)² = 28 g/mol/ M(a)

( by squaring both sides)

M(a)(0.667)² = 28

M(a) = 28/(0.667)²

M(a) = 62.9 g/mol.

The molar mass of the unidentified gas is 62.9 g/mol.

What effect has Graham's law?

According to Graham's law of diffusion, the ratio of the square root of the molecular weights of gas particles to their diffusion rates is equivalent.

To know more about Graham's law of diffusion, visit:

brainly.com/question/14004529

#SPJ4

Answer:

The initial temperature of the coffee was 75°C.

The 38.59 gram of oxygen is required to burn 11gram of octane.

2C8H18 + 25O2 = 16CO2 + 18H2O

The complete combustion of 2 x114 gram of octane require 25 x 32 gram of oxygen.

so the 11 gram of octane needs 38.59 gram of oxygen according to balanced chemical equation.

Alkane releases a tremendous amount of heat energy when heated in the presence of enough oxygen or air to form carbon dioxide and water. It happens when there is not enough oxygen present for the complete combustion of the fuel. As a result, carbon or carbon monoxide is produced. A poisonous gas called carbon monoxide is produced as a byproduct and is colorless.

Hence, octane undergoes complete combustion with oxygen.

To know more about Combustion.

https://brainly.com/question/15117038

#SPJ4

A gas at 772 mph and 35oc occupies a volume of 6.85 l, calculate its volume if the temperature is raised to 50oc at a constant pressure and the final volume is 7.18L.

What is Charles law?

Charles' law asserts that a gas's volume is equal to a constant number times the temperature of that gas, as determined by the Kelvin scale (zero Kelvin corresponds to -273.15 degrees Celsius).

What is volume?

The volume (in inches, quarts, or centimeters) that a three-dimensional object takes up in space: The amount of a material that fills a given volume, measured in cubic capacity.

According to Charles law, the volume of a gas is directly proportional to  the absolute temperature at constant pressure.

It can be mathematically represented as; V1/T1 = V2/T2 where V1 = initial volume, and V2 = final volume.

T1= initial temperature in Kelvin and T2= final temperature in  Kelvin.

Here V1 = 6.85 L , T1= 35 + 273 =308 K and T2 =50 +27 =323 K

Final volume = 7.18 L

Therefore, a gas at 772 mph and 35oc occupies a volume of 6.85 l, calculate its volume if the temperature is raised to 50oc at a constant pressure and the final volume is 7.18L.

Learn more about Charles law from the given link.

https://brainly.com/question/16133810

#SPJ4

The properties of the unknown solids which will help to determine whether or not they are ionic solids is them possessing a high melting and boiling points.

This is referred to as a chemical compound which comprises of ions and is usually held together by electrostatic forces called ionic bonding.

Ionic solids have to undergo melting which involves the application of heat in other to test the melting and boiling points as solid substances are unable to do that due to its tightly packed particles which is therefore the reason why it was chosen as the correct choice.

Read more about Ionic solids here https://brainly.com/question/2773282

#SPJ1

In a titration of 35.00 mL of 0.737 M H₂SO₄, 62.4 mL of a 0.827 M KOH solution is required for neutralization.

The interaction of H+ ions and OH- ions produces water in a neutralization reaction, which occurs when an acid and a base react to form water and salt. A pH of 7 results from the neutralization of a potent acid and a potent base.

Calculation:

The balanced reaction is

H₂SO₄  +  2 KOH  ⇒  2 H₂O  +  K₂SO₄

The molarity M is the number of moles of solute that are dissolved in a given volume, expressed as:

number of moles =  molarity × volume

For  H₂SO₄

35.00 mL= 0.035 L (being 1,000 mL= 1 L)

Molarity=  0.737 M

Then,

number of moles= 0.737 M × 0.035 L

number of moles= 0.0258

So you must neutralize 0.0258 moles of H₂SO₄. Now you can apply the following rule of three: if by stoichiometry 1 mole of H₂SO₄ is neutralized with 2 moles of KOH, 0.0258 moles of H₂SO₄ are neutralized with moles of KOH =?

moles of KOH = 0.0516,

Then 0.0516 moles of KOH are needed.

Molarity= 0.827 M

number of moles= 0.0516

volume=?

Replacing in the definition of molarity: 0.827M = 0.0516 moles/ volume.

= 0.0516moles/0.827M = volume

volume = 0.0624 L= 62.4 mL.

Hence, 62.4 mL of a 0.827 m KOH solution is required for neutralization.

To know more about Neutralization, check out:

https://brainly.com/question/23008798

#SPJ4

The standard reaction free energy ΔG° is   -77.393 kJ for the following redox reaction using standard reduction potentials from the aleks data tab.

The redox reaction occurs at anode :

6Cl-(aq) + 2NO3-(aq) + 8H+(aq) → 3 Cl2(g) + 2NO (g) + 4H2O(l)

[tex]E^0_{cell}[/tex] = 0.957

[tex]E^0_{cell}[/tex] = 1.35827 - 0.957

[tex]E^0_{cell}[/tex] = 0.401

There were 2 moles of electrons involved in this redox reaction, according to the reaction.

[tex]G^0[/tex] = - (2) * 96,500 * 0.401

[tex]G^0[/tex] = - 77393 joules or -77.393 kJ

Hence, the standard reaction free energy is -77.393 kJ.

the complete question is:

Using standard reduction potentials from the ALEKS Data tab, calculate the standard reaction free energy for the following redox reaction. Round your answer to 3 significant digits.

6Cl-(aq) + 2NO3-(aq) + 8H+(aq) -> 3 Cl2(g) + 2NO (g) + 4H2O(l)

learn more about redox reaction here

https://brainly.com/question/13293425

#SPJ4

3 p. Compared to 2 s, it's going from like the 3 p level 123 up here to the 2 s level versus 4, p to 3 p, 4 tethys. According to the quantum-mechanical model for the hydrogen atom.

Methane, widely known as natural gas, has a healthy substitute in hydrogen. According to estimates, it makes about 75% of the universe's mass and is the most prevalent chemical element. Huge quantities of hydrogen atoms are present on earth in water, plants, animals, and, of course, people. The principal energy level, energy level, orbital (arbitrary level), and spin of electrons are all described in quantum mechanics models along with the possibility of placing them inside an atom. According to quantum theory, which asserts that matter exhibits wave-like qualities, the quantum mechanics model is built on this idea.

Learn more about hydrogen here:

https://brainly.com/question/11837837

#SPJ4

NaOH is the substance that, in response to the query, would be regarded as an electrolyte. Your blood and other bodily fluids include minerals called electrolytes that are electrically charged.

What transpires if your body is deficient in electrolytes?

Blood clotting, muscular contractions, acid balance, and fluid control can all be affected when your body is low on electrolytes. Since your heart is a muscle, electrolytes aid in controlling your heartbeat.

How can I balance my electrolytes again?

The best way to keep your electrolyte balance is to stay hydrated. The most natural option for hydration is water. Compared to other drinks, it is less expensive and more readily available. Another option for restoring electrolytes is

To know more about electrolyte visit:

https://brainly.com/question/28699046

#SPJ4