(i) Inner-sphere surface complexation involves direct bonding between the cation and the surface functional groups, while outer-sphere surface complexation involves electrostatic interactions without direct bonding.
Explanation:
Surface complexation refers to the interaction between dissolved species, such as cations, and the surfaces of solid materials, such as clays. Two types of surface complexes can form: inner-sphere surface complexes and outer-sphere surface complexes.
In inner-sphere surface complexation, the cation directly bonds with the surface functional groups of the solid material. This bonding occurs through coordination between the cation and the available sites on the surface, forming a stable complex. The coordination typically involves sharing of electron pairs, resulting in a stronger interaction between the cation and the surface.
On the other hand, outer-sphere surface complexation involves electrostatic interactions between the cation and the surface without direct bonding. In this case, the cation is attracted to the surface due to electrostatic forces, such as electrostatic attraction or repulsion. The cation is not directly coordinated to the surface functional groups but is influenced by the electrical properties of the surface.
The relative strength of interactions differs between inner-sphere and outer-sphere surface complexes. Inner-sphere complexes are typically stronger because of the direct bonding between the cation and the surface functional groups. Outer-sphere complexes, being primarily based on electrostatic interactions, are generally weaker.
(c) In an aqueous solution with a pH less than 9, containing Mg2+ ions in contact with a clay surface, we would expect Mg2+ to form inner-sphere surface complexes. The reason for this is that at lower pH levels, the clay surface is likely to have protonated surface functional groups, which can readily coordinate with the Mg2+ ions. The positively charged Mg2+ ions can form direct bonds with the negatively charged protonated surface functional groups through coordination.
The formation of inner-sphere complexes is favored when the surface functional groups are protonated, providing available coordination sites for the cations. In this case, the inner-sphere complexation of Mg2+ with the clay surface is more energetically favorable than outer-sphere complexation.
surface complexation, inner-sphere, and outer-sphere surface complexes, as well as the factors influencing the type of complexation that occurs in different conditions and pH levels.
learn more about:complexation
brainly.com/question/31836111
#SPJ11
how many grams of agno3 are needed to make 250. ml of a solution that is 0.145 m?how many grams of agno3 are needed to make 250. ml of a solution that is 0.145 m?6.16 g0.0985 g98.5 g0.162 g
Therefore, approximately 6.16 grams of AgNO₃ are needed to make 250 mL of a solution with a concentration of 0.145 M.
To calculate the grams of AgNO₃ needed to make a 250 mL solution with a concentration of 0.145 M, we can use the formula:
Molarity (M) = moles of solute / volume of solution (L)
First, we need to convert the volume of the solution from milliliters to liters:
Volume = 250 mL = 250 mL / 1000 mL/L = 0.250 L
Next, we rearrange the formula to solve for moles of solute:
moles of solute = Molarity × volume of solution
moles of solute = 0.145 M × 0.250 L = 0.03625 mol
Finally, we can calculate the grams of AgNO₃ using its molar mass:
grams of AgNO₃ = moles of solute × molar mass of AgNO₃
grams of AgNO₃ = 0.03625 mol × (107.87 g/mol + 14.01 g/mol + 3(16.00 g/mol))
grams of AgNO₃ ≈ 0.03625 mol × 169.87 g/mol ≈ 6.16 g
Learn more about concentration here
https://brainly.com/question/30862855
#SPJ11
What is the major organic product of the following reaction? BrH₂C 000. ABUD Hac OH OH Hс: Bri CH PBr3 B OH Њс- Br OH Hac D Br
The major organic product obtained is CH₂Br.
Organic products refers to the use of natural, sustainable farming practices with the avoidance of synthetic substances such as pesticides, antibiotics, and hormones. Organic production is designed mainly to support the health of soil, ecosystems, and human beings. Organic farmers adopts methods such as crop rotation, green manure, and composting to maintain soil fertility, control pests, and reduce pollution. Organic food is produced without the use of chemical fertilizers, pesticides, or other synthetic inputs. Organic food is considered to be higher in nutrients and lower in contaminants than conventionally-grown food.
To know more about organic products here
https://brainly.com/question/32077648
#SPJ4
Calculate the pH of each solution. pH =; [H3O+]=6.4×10−5M
Express your answer using two decimal places. pH =
The pH of the solution with [H3O+] = [tex]6.4×10^−5[/tex]M is ________.
pH is a measure of the acidity or alkalinity of a solution and is defined as the negative logarithm (base 10) of the concentration of hydronium ions ([H3O+]). To calculate the pH of a solution, we can use the formula:
pH = -log[H3O+]
In this case, the given concentration of hydronium ions is[tex]6.4×10^−5 M.[/tex] By substituting this value into the pH formula, we can determine the pH of the solution:
pH = [tex]-log(6.4×10^−5)[/tex]
Using a calculator, we can calculate the logarithm and obtain the pH value. The resulting pH will have two decimal places to express the acidity or alkalinity of the solution accurately.
It is important to note that pH values range from 0 to 14, where a pH of 7 is considered neutral, pH values below 7 indicate acidity, and pH values above 7 indicate alkalinity. Therefore, the calculated pH value will help determine the acidity or alkalinity of the solution.
Learn more about PH values
brainly.com/question/28580519
#SPJ11
Consider the chemical equation shown below. You react 6.50 g of
CH 4 with 15.8 g of Cl 2. How many grams of
CHCl 3 will form?
CH 4 + 3 Cl 2 ---> CHCl 3 + 3 HCl
8.87 g
25.3 g
When 6.50 g of [tex]CH_{4}[/tex] reacts with 15.8 g of [tex]Cl_{2}[/tex] according to the given chemical equation, the amount of mass of [tex]CHCl_{3}[/tex] that will form is 8.87 g.
To determine the amount of [tex]CHCl_{3}[/tex] that will form, we need to calculate the limiting reactant first. The limiting reactant is the reactant that is completely consumed and determines the maximum amount of product that can be formed.
First, we need to convert the masses of [tex]CH_{4}[/tex] and [tex]Cl_{2}[/tex] to moles using their respective molar masses. The molar mass of [tex]CH_{4}[/tex] is approximately 16.04 g/mol, and the molar mass of Cl₂ is approximately 70.90 g/mol.
Mass of [tex]CH_{4}[/tex] in moles = 6.50 g / 16.04 g/mol ≈ 0.405 mol
Mass of [tex]Cl_{2}[/tex] in moles = 15.8 g / 70.90 g/mol ≈ 0.223 mol
Next, we determine the stoichiometric ratio between [tex]CH_{4}[/tex] and [tex]CHCl_{3}[/tex] from the balanced chemical equation. The ratio is 1:1, which means that for every 1 mol of [tex]CH_{4}[/tex], 1 mol of [tex]CHCl_{3}[/tex] is formed.
Since the stoichiometric ratio is 1:1, the amount of [tex]CHCl_{3}[/tex] formed will also be approximately 0.405 mol.
Finally, we can convert the moles of [tex]CHCl_{3}[/tex] to grams using its molar mass of approximately 119.38 g/mol.
Mass of [tex]CHCl_{3}[/tex] = 0.405 mol * 119.38 g/mol ≈ 48.42 g ≈ 8.87 g (rounded to two decimal places)
Therefore, when 6.50 g of [tex]CH_{4}[/tex] reacts with 15.8 g of [tex]Cl_{2}[/tex], approximately 8.87 g of [tex]CHCl_{3}[/tex] will form.
Learn more about mass here:
https://brainly.com/question/11954533
#SPJ11
15. Rank the given conformations of 1,2,4-trimethylcyclohexane in order of increasing stability: A) \( 3
The given conformations of 1,2,4-trimethylcyclohexane can be ranked in order of increasing stability as follows: A) \( 3 > 2 > 4 > 1 \).
The stability of a conformation is determined by factors such as steric hindrance, torsional strain, and ring strain. The most stable conformation is labeled as 3, followed by 2, 4, and finally 1.
In conformation 3, the three methyl groups are in equatorial positions, which reduces steric hindrance and minimizes torsional strain. In conformation 2, two of the methyl groups are in axial positions, increasing steric hindrance and torsional strain compared to conformation 3.
Conformation 4 has even more steric hindrance and torsional strain, as two of the methyl groups are in axial positions and one is in an equatorial position.
Lastly, conformation 1 has all three methyl groups in axial positions, resulting in the highest steric hindrance and torsional strain among the given conformations.
The stability of the conformations of 1,2,4-trimethylcyclohexane can be ranked in increasing order as A) \( 3 > 2 > 4 > 1 \), with conformation 3 being the most stable due to the favorable arrangement of the methyl groups in equatorial positions.
Learn more about trimethylcyclohexane here:
https://brainly.com/question/32819119
#SPJ11
A 2.0 gallon flask weighs 4.0 lbs when empty. When it is filled
with liquid, the flask weighs 4536.0 g. What is the density of the
liquid in g/mL? (1 gallon =
3.785 L, 1 1b = 453.6 g)
The density of the liquid in the 2.0 gallon flask is approximately 1.0 g/mL.
To find the density of the liquid in the flask, we need to determine the mass of the liquid and divide it by the volume of the flask.
Given that the flask weighs 4.0 lbs when empty, we can convert this to grams using the conversion factor of 1 lb = 453.6 g. Thus, the empty flask weighs 4.0 lbs * 453.6 g/lb = 1814.4 g.
When the flask is filled with liquid, it weighs 4536.0 g. To find the mass of the liquid, we subtract the mass of the empty flask from the total weight of the filled flask: 4536.0 g - 1814.4 g = 2721.6 g.
The volume of the flask is given as 2.0 gallons, which we can convert to liters using the conversion factor of 1 gallon = 3.785 L. Thus, the volume of the flask is 2.0 gallons * 3.785 L/gallon = 7.57 L.
Finally, we calculate the density by dividing the mass of the liquid by the volume of the flask: density = 2721.6 g / 7.57 L ≈ 1.0 g/mL. Therefore, the density of the liquid in the flask is approximately 1.0 g/mL.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ11
1- Neutralization reactions such as the one shown
below are exothermic processes . HCl ( aq ) + NaOH ( aq ) → NaCl (
aq ) + H₂O ( 1 ) AH - 55.4 kJ If 0.634 moles of hydrochloric acid
are neutraliz
when 0.634 moles of HCl are neutralized, approximately -35.05 kJ of heat is released.
If 0.634 moles of hydrochloric acid (HCl) are neutralized in the reaction with sodium hydroxide (NaOH), we can calculate the amount of heat released during the neutralization process using the given enthalpy change (ΔH) value of -55.4 kJ.
The enthalpy change (ΔH) for a reaction is given per mole of the limiting reactant. In this case, the limiting reactant is HCl.
The molar enthalpy change (ΔH) can be calculated using the formula:
ΔH = q / n
where ΔH is the enthalpy change, q is the heat released or absorbed, and n is the number of moles of the limiting reactant.
Rearranging the formula, we have:
q = ΔH * n
Substituting the values, we get:
q = -55.4 kJ * 0.634 mol ≈ -35.05 kJ
The negative sign indicates that heat is released during the reaction, making it exothermic.
The enthalpy change (ΔH) given is a standard enthalpy change at a specific temperature and pressure (usually 25°C and 1 atm). The actual heat released may vary depending on the conditions under which the reaction takes place.
for more questions on heat
https://brainly.com/question/30738335
#SPJ8
A chemist constructs a plot of ln k vs. 1/T for a chemical
reaction. The slope of the trendline for the data is -774 K.
What is the activation energy for this reaction in kJ/mol? R =
8.314 J/(mol*K)
B
The activation energy for the reaction is approximately 6433.836 kJ/mol using the Arrhenius equation.
The activation energy (Ea) for the reaction can be determined from the slope of the trendline using the Arrhenius equation:
ln(k) = -Ea/(R*T) + ln(A)
Where:
k = rate constant of the reaction
T = absolute temperature
R = gas constant (8.314 J/(mol*K))
A = pre-exponential factor
Given that the slope of the trendline is -774 K, we can equate it to -Ea/R:
-774 K = -Ea / (8.314 J/(mol*K))
To convert the gas constant to kJ/(mol*K), we divide by 1000:
-774 K = -Ea / (8.314 kJ/(mol*K))
Now, we can rearrange the equation to solve for Ea:
Ea = -774 K * (8.314 kJ/(mol*K))
Calculating this expression:
Ea = -774 K * 8.314 kJ/(mol*K)
Ea = -6433.836 kJ/mol
The activation energy for the reaction is approximately 6433.836 kJ/mol.
To know more about energy visit:
https://brainly.com/question/1380484
#SPJ11
Suppose 52 mL of 0.212 M HCl is titrated with 0.171 M NaOH.
Calculate the pH of the resulting mixture after the addition of
24.2 mL (total) of strong base. Enter your answer to 2 decimal
places.
The pH of the resulting mixture after the addition of 24.2 mL of 0.171 M NaOH to 52 mL of 0.212 M HCl is 5.73. This pH value indicates that the solution is slightly acidic since it is below 7 on the pH scale.
To determine the pH of the resulting mixture, we need to calculate the moles of acid and base present and then determine the excess or deficit of each component.
First, we calculate the moles of HCl:
Moles of HCl = Volume of HCl (L) × Concentration of HCl (mol/L)
= 0.052 L × 0.212 mol/L
= 0.011024 mol
Next, we calculate the moles of NaOH:
Moles of NaOH = Volume of NaOH (L) × Concentration of NaOH (mol/L)
= 0.0242 L × 0.171 mol/L
= 0.0041422 mol
Since HCl and NaOH react in a 1:1 ratio, we can determine the excess or deficit of each component. In this case, the moles of HCl are greater than the moles of NaOH, indicating an excess of acid.
To find the final concentration of HCl, we subtract the moles of NaOH used from the initial moles of HCl:
Final moles of HCl = Initial moles of HCl - Moles of NaOH used
= 0.011024 mol - 0.0041422 mol
= 0.0068818 mol
The final volume of the mixture is the sum of the initial volumes of HCl and NaOH:
Final volume = Volume of HCl + Volume of NaOH
= 52 mL + 24.2 mL
= 76.2 mL
Now we can calculate the final concentration of HCl:
Final concentration of HCl = Final moles of HCl / Final volume (L)
= 0.0068818 mol / 0.0762 L
= 0.090315 mol/L
To calculate the pH, we use the equation:
pH = -log[H+]
Since HCl is a strong acid, it dissociates completely into H+ and Cl-. Therefore, the concentration of H+ in the solution is equal to the concentration of HCl.
pH = -log(0.090315)
≈ 5.73
The pH of the resulting mixture after the addition of 24.2 mL of 0.171 M NaOH to 52 mL of 0.212 M HCl is approximately 5.73. This pH value indicates that the solution is slightly acidic since it is below 7 on the pH scale. The excess of HCl compared to NaOH leads to an acidic solution.
To know more about solution ,visit:
https://brainly.com/question/29058690
#SPJ11
When methanol, CH, OH, is burned in the presence of oxygen gas, O₂, a large amount of heat energy is released, as shown in the combustion reaction. CH₂OH(g) + O₂(g) CO₂(g) + 2 H₂O(1) AH = -7
The combustion reaction of methanol (CH3OH) with oxygen gas (O2) produces carbon dioxide (CO2) and water (H2O), releasing a significant amount of heat energy. The value of ΔH (enthalpy change) for the reaction is -726 kJ/mol.
The balanced equation for the combustion reaction of methanol is CH3OH(g) + O2(g) → CO2(g) + 2 H2O(1). This reaction involves the oxidation of methanol, resulting in the formation of carbon dioxide and water.
The negative value of ΔH (-726 kJ/mol) indicates that the reaction is exothermic, meaning it releases heat energy. The energy released is a result of the strong bonds formed in the products (CO2 and H2O) compared to the weaker bonds in the reactants (CH3OH and O2). The combustion of methanol is a highly exothermic process, which is why it is commonly used as a fuel. The released heat energy can be harnessed for various applications, such as heating, electricity generation, or powering engines.
To learn more about combustion reaction: -brainly.com/question/14335621
#SPJ11
8 13 3 points Calculate the number of moles (not molarity) of HI that are at equilibrium with 2.77 mol of H₂ and 2.77 mol of l₂ in a 5.00-L flask at 448 "C. (those are the equilibrium values) H₂
Given,Initial number of moles of H₂
=2.77 molInitial number of moles of l₂
=2.77 molInitial number of moles of HI
=0 molThe reaction taking place is,H₂(g) + l₂(g) ⇌ 2HI(g)Here,we know the equilibrium concentrations of H₂, l₂ and HI.
Therefore,we can use the expression for equilibrium constant,K_c
= ([HI]²)/[H₂][l₂]Given equilibrium values are,H₂
= 0.554 Ml₂
= 0.554 MHI
= 0 moles (initially zero, since no reaction occurred initially)The reaction taking place is,H₂(g) + l₂(g) ⇌ 2HI(g)Let 'x' be the number of moles of HI that are at equilibrium. Thus, the moles of H2 and I2 will decrease by x.
The equilibrium values will be:H₂
= 0.554 - xMl₂
= 0.554 - xMHI
= 2xThe equilibrium constant Kc can be calculated using the given concentrations as follows:Kc
= ([HI]^2) / ([H2][I2])
= (2x)^2 / (0.554 - x)(0.554 - x)Substituting the given values in the above equation, we get,Kc
= 2.3 × 10^2According to the formula,Kc = ([HI]²)/[H₂][l₂]Substituting the values of Kc and the given concentrations
To know more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
Determine the mass of a solute (in g) contained in 250.0 ml of a
3.92 M solution of AIF3.
The mass of solute contained in 250.0 mL of a 3.92 M solution of AlF3 is X g.
To determine the mass of the solute (AlF3) in the given solution, we need to use the molarity (M) and volume of the solution.
1. Start by converting the given volume from milliliters (mL) to liters (L). Since 1 L is equal to 1000 mL, the volume of the solution is 250.0 mL / 1000 mL/L = 0.250 L.
2. The molarity of the solution is given as 3.92 M, which means there are 3.92 moles of AlF3 present in 1 liter of the solution.
3. Now, we can calculate the number of moles of AlF3 in the given volume of the solution by multiplying the molarity by the volume in liters:
Moles of AlF3 = Molarity × Volume = 3.92 M × 0.250 L.
4. Finally, calculate the mass of the solute (AlF3) by multiplying the number of moles by the molar mass of AlF3, which is 83.98 g/mol.
Mass of AlF3 = Moles of AlF3 × Molar mass of AlF3.
Performing the calculations above will give you the mass of the solute (AlF3) contained in 250.0 mL of the 3.92 M solution, expressed in grams.
To know more about mass click here:
https://brainly.com/question/26789700
#SPJ11
1. Standard free energy change for the reaction A + B is -15kJ/mole (AG° = - 15 kJ/mole). What is the equilibrium constant (
1. Standard free energy change for the reaction A B is -15kJ/mole (ΔGo’ = - 15 kJ/mole). What is the equilibrium constant (Keq =?)
2. Based on the above data, what is the actual free energy change for the reaction A B, when [A] = 10mM and [B] = 0.1mM?
3. When the reaction A+B C is at equilibrium, the concentration of reactants are as follows: [A] = 2mM, [B] = 3mM, and [C] = 9mM. What is the standard free energy for the reaction?
ΔGo’ = - RT lnKeq
ΔG = ΔGo’ + RT lnKeq
Where, ΔGo’ = biological standard free energy, J/mol
(Reactants = 1 M; Products = 1 M; T = 37 C or 310; 1 ATM; pH =7.0)
ΔG = overall free energy (or actual free energy in living system)
R = gas constant, 8.314 J/mol.K
T = temperature in K
Keq = equilibrium constant (ratio of products/reactants)
1. The equilibrium constant (Keq) is approximately 0.002 for the reaction A → B with a standard free energy change of -15 kJ/mol.
2. The actual free energy change (ΔG) for the reaction A → B is approximately -27,240 J/mol when [A] = 10 mM and [B] = 0.1 mM.
3. The standard free energy change (ΔGo') for the reaction A + B → C is approximately -10,117.23 J/mol.
1. The equilibrium constant (Keq) can be determined using the equation: ΔGo' = -RT ln(Keq), where ΔGo' is the standard free energy change, R is the gas constant (8.314 J/mol.K), and T is the temperature in Kelvin.
Given that ΔGo' = -15 kJ/mol, we need to convert it to Joules by multiplying by 1000:
ΔGo' = -15 kJ/mol = -15,000 J/mol.
Assuming the temperature is 310 K, we can calculate Keq as follows:
ΔGo' = -RT ln(Keq)
-15,000 J/mol = -(8.314 J/mol.K)(310 K) ln(Keq)
Simplifying the equation:
ln(Keq) = -15,000 J/mol / (8.314 J/mol.K * 310 K)
ln(Keq) ≈ -5.97
Taking the exponential of both sides:
Keq ≈ e^(-5.97)
Calculating Keq:
Keq ≈ 0.002
Therefore, the equilibrium constant (Keq) for the reaction A → B is approximately 0.002.
2. To determine the actual free energy change (ΔG) for the reaction A → B, we can use the equation: ΔG = ΔGo' + RT ln(Keq), where ΔG is the overall free energy change, R is the gas constant (8.314 J/mol.K), T is the temperature in Kelvin, and Keq is the equilibrium constant.
Given that [A] = 10 mM and [B] = 0.1 mM, we can calculate the actual free energy change as follows:
ΔG = -15,000 J/mol + (8.314 J/mol.K)(310 K) ln(0.1/10)
Simplifying the equation:
ΔG ≈ -15,000 J/mol + (8.314 J/mol.K)(310 K) ln(0.01)
Calculating ΔG:
ΔG ≈ -15,000 J/mol + (8.314 J/mol.K)(310 K)(-4.605)
ΔG ≈ -15,000 J/mol - 12,240 J/mol
ΔG ≈ -27,240 J/mol
Therefore, the actual free energy change (ΔG) for the reaction A → B, when [A] = 10 mM and [B] = 0.1 mM, is approximately -27,240 J/mol.
3. To calculate the standard free energy change (ΔGo') for the reaction A + B → C, we can use the equation: ΔGo' = -RT ln(Keq), where ΔGo' is the standard free energy change, R is the gas constant (8.314 J/mol.K), T is the temperature in Kelvin, and Keq is the equilibrium constant.
Given the concentrations at equilibrium: [A] = 2 mM, [B] = 3 mM, and [C] = 9 mM, we can calculate the standard free energy change as follows:
First, let's calculate the ratio of products to reactants based on their concentrations:
[A] = 2 mM, [B] = 3 mM, and [C] = 9 mM
Keq = ([C]^coefficient[C] * [A]^coefficient[A] * [B]^coefficient[B]) / ([A]^coefficient[A] * [B]^coefficient[B])
Keq = (9^1 * 2^0 * 3^0) / (2^1 * 3^1)
Keq = 9 / 6
Keq = 1.5
Now, we can calculate ΔGo' using the equation:
ΔGo' = -RT ln(Keq)
Assuming the temperature is 310 K, and using the gas constant R = 8.314 J/mol.K:
ΔGo' = -(8.314 J/mol.K)(310 K) ln(1.5)
Calculating ΔGo':
ΔGo' ≈ -(8.314 J/mol.K)(310 K)(0.405)
ΔGo' ≈ -10,117.23 J/mol
Therefore, the standard free energy change (ΔGo') for the reaction A + B → C, when the concentrations are [A] = 2 mM, [B] = 3 mM, and [C] = 9 mM, is approximately -10,117.23 J/mol.
1. The equilibrium constant (Keq) is approximately 0.002 for the reaction A → B with a standard free energy change of -15 kJ/mol.
2. The actual free energy change (ΔG) for the reaction A → B is approximately -27,240 J/mol when [A] = 10 mM and [B] = 0.1 mM.
3. The standard free energy change (ΔGo') for the reaction A + B → C is approximately -10,117.23 J/mol.
To learn more about energy, visit
https://brainly.com/question/31055237
#SPJ11
The turnover number is denoted by the term kcat. What is the
significance of determining this value?
Determining the turnover number, denoted by the term kcat, is significant because it provides important information about the catalytic efficiency of an enzyme.
The turnover number, kcat, represents the maximum number of substrate molecules converted into product per unit time by a single active site of an enzyme when it is saturated with substrate. It is a measure of the enzyme's ability to perform catalysis and reflects the efficiency of the enzyme in converting substrate to product.
By determining the kcat value, researchers can compare and evaluate the catalytic efficiencies of different enzymes or variants of the same enzyme. It allows for the assessment of the enzyme's ability to catalyze the reaction of interest and can be used to understand the enzyme's role in biological processes or to optimize enzyme performance in various applications such as biotechnology and drug development.
To learn more about catalytic efficiency: -brainly.com/question/2928110
#SPJ11
ideal gas law
QUESTION 2 One mole of an ideal gas occupies 22.4 L at standard temperature and pressure. What would be the volume of one mole of an ideal gas at 359 °C and 1536 mmHg. (R-0,082 L-atm/K mol) QUESTION
The Ideal Gas Law (IGL) is a law that explains the behaviour of ideal gases. An ideal gas is one that is composed of point particles, which means that it has no volume and does not attract or repel each other. This law is described by the formula PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.
This equation can be manipulated to solve for any of the variables in the equation.The given question states that one mole of an ideal gas occupies 22.4 L at standard temperature and pressure. We can assume that standard temperature is 0°C and standard pressure is 1 atm. Therefore, we can rewrite the IGL equation as:
PV = nRTn = 1 molR = 0.082 L-atm/K molT = 273 K (since standard temperature is 0°C)V = 22.4 LP = 1 atmUsing these values, we can solve for R to get:R = PV/nTR = (1 atm x 22.4 L)/(1 mol x 273 K)R = 0.082 L-atm/K molNow we can use the same equation to solve for the volume of one mole of an ideal gas at 359°C and 1536 mmHg. The temperature must be converted to kelvin, so:
T = 359°C + 273K = 632 KP = 1536 mmHg (converting to atm by dividing by 760 mmHg/atm)P = 2.02 atmUsing these values and the ideal gas law equation, we can solve for V:PV = nRTn = 1 molR = 0.082 L-atm/K molT = 632 KV = (nRT)/PV = (1 mol x 0.082 L-atm/K mol x 632 K)/(2.02 atm)V = 20.1 LTherefore, the volume of one mole of an ideal gas at 359°C and 1536 mmHg would be 20.1 L.
To know more about explains visit:
https://brainly.com/question/31614572
#SPJ11
A.) Vinegar is a solution of acetic acid in water. If a 145 mL
bottle of distilled vinegar contains 31.1 mL of acetic acid, what
is the volume percent (v/v) of the solution? Express your answer to
thr
The volume percent (v/v) of acetic acid in the vinegar solution is 21.4%.
To find the volume percent (v/v) of acetic acid in the vinegar solution, divide the volume of acetic acid (31.1 mL) by the total volume of the solution (145 mL) and multiply by 100. The result is 21.4%, indicating that the acetic acid makes up 21.4% of the total volume of the solution.
Volume percent is a way to express the concentration of a component in a solution as a percentage of the total volume. In this case, it represents the proportion of acetic acid in the vinegar. The calculation is derived from the ratio of the volume of the solute (acetic acid) to the volume of the solution (including both acetic acid and water), multiplied by 100 to obtain a percentage. Therefore, 21.4% of the vinegar solution is acetic acid.
To know more about acetic acid refer to-
https://brainly.com/question/15202177
#SPJ11
QUESTION 22 * 3 POINTS Which of the following enzymes are involved in the digestion of proteins? Select the correct answer below: Amykare Pepsin Maltase Lipase
The correct enzyme involved in the digestion of proteins is Pepsin.
Out of the options provided, Pepsin is the enzyme involved in the digestion of proteins. Pepsin is produced in the stomach and helps break down proteins into smaller peptides.
Amylase is an enzyme involved in the digestion of carbohydrates, specifically breaking down starches into sugars.
Maltase is also an enzyme involved in carbohydrate digestion, specifically breaking down maltose into glucose.
Lipase is an enzyme involved in the digestion of lipids (fats), breaking them down into fatty acids and glycerol.
Therefore, the correct answer is Pepsin.
To know more about proteins, visit:
https://brainly.com/question/29633638
#SPJ11
A buffer solution is made that is 0.430 M in
H2S and 0.430 M in NaHS .
If Ka1 for H2S is 1.00 x 10^-7 , what is the pH of the buffer
solution?
pH =
Write the net ionic equation for the reaction
that o
The pH of the buffer solution can be calculated using the Henderson-Hasselbalch equation. pH = pKa + log([A-]/[HA])
In this case, the pKa value can be determined from the Ka1 value for H2S, which is 1.00 x 10^-7. Taking the negative logarithm of the Ka1 gives us the pKa value, which is 7.
Since the buffer solution contains both H2S and NaHS, we can consider H2S as the acidic component (HA) and NaHS as the conjugate base (A-). The concentrations of H2S and NaHS are both 0.430 M.
Plugging the values into the Henderson-Hasselbalch equation:
pH = 7 + log([NaHS]/[H2S])
pH = 7 + log(0.430/0.430)
pH = 7 + log(1)
pH = 7 + 0
pH = 7
Therefore, the pH of the buffer solution is 7, which is neutral.
The net ionic equation for the reaction that occurs in the buffer solution involves the dissociation of H2S into H+ and HS-. It can be written as follows:
H2S ⇌ H+ + HS-
This equation represents the equilibrium between the molecular form of H2S and the ionized forms (H+ and HS-) in the buffer solution. The equilibrium is governed by the acid dissociation constant Ka1, which represents the extent of dissociation of H2S.
Learn more about buffer solutions, the Henderson-Hasselbalch equation, and acid-base equilibria to deepen your understanding of pH calculations in buffer systems.
Learn more about buffer solutions
brainly.com/question/31367305
#SPJ11
Determine the molality of a solution made by dissolving 14.6g of
LIF in 324g of H2O
The molality of the solution is approximately 1.733 mol/kg. This means that for every kilogram of water, there are approximately 1.733 moles of LiF dissolved in the solution.
To determine the molality of a solution, we need to calculate the amount of solute (in moles) and the mass of the solvent (in kilograms). We are given the mass of solute, 14.6 g of LiF, and the mass of the solvent, 324 g of H2O. Now we can proceed to calculate the molality.
Molality is a measure of the concentration of a solution, defined as the number of moles of solute per kilogram of solvent. To calculate the molality, we first need to convert the mass of solute into moles. The molar mass of LiF (lithium fluoride) is the sum of the atomic masses of lithium (Li) and fluorine (F), which is approximately 25.94 g/mol.
Number of moles of LiF = Mass of LiF / Molar mass of LiF
= 14.6 g / 25.94 g/mol
≈ 0.562 mol
Next, we need to convert the mass of the solvent into kilograms.
Mass of H2O = 324 g
= 324 g / 1000
= 0.324 kg
Now, we can calculate the molality using the formula:
Molality = Moles of solute / Mass of solvent (in kg)
= 0.562 mol / 0.324 kg
≈ 1.733 mol/kg
Therefore, the molality of the solution is approximately 1.733 mol/kg. This means that for every kilogram of water, there are approximately 1.733 moles of LiF dissolved in the solution. Molality is a useful concentration unit, especially in colligative property calculations, as it remains constant with temperature changes and does not depend on the size of the solution.
To learn more about molality click here:
brainly.com/question/30909953
#SPJ11
Define the terms Total ion chromatogram and Selected ion
chromatogram. How may a Selected ion chromatogram be useful when
trying to calculate low levels of a specific pesticide in a river
water sample
A total ion chromatogram (TIC) is a type of chromatogram that shows the intensity of all ions present in a sample. A selected ion chromatogram (SIC) is a type of chromatogram that shows the intensity of only a specific set of ions.
In mass spectrometry, a chromatogram is a graph that shows the intensity of ions as a function of time. The time axis represents the retention time, which is the time it takes for an ion to travel through the mass spectrometer. The intensity axis represents the number of ions detected at a particular retention time. A TIC shows the intensity of all ions present in a sample. This can be useful for identifying the different components of a sample, but it can also be difficult to interpret because it can be difficult to distinguish between different ions that have similar masses. A SIC shows the intensity of only a specific set of ions. This can be useful for identifying a specific compound in a sample. For example, if you are trying to determine the concentration of a pesticide in a river water sample, you could use a SIC to monitor the intensity of the ions that are characteristic of that pesticide.
SICs can be more sensitive than TICs because they only detect the ions that you are interested in. This can be important for detecting low levels of a pesticide in a river water sample.
Here are some additional details about TICs and SICs:
TICs are typically used to provide a general overview of the components of a sample. They can be used to identify different compounds and to estimate their relative concentrations.
SICs are typically used to identify specific compounds in a sample. They can be used to determine the concentration of a specific compound with greater accuracy than a TIC.
To know more about selected ion chromatogram, click here:-
https://brainly.com/question/31827270
#SPJ11
Answer the second ionization energy (energy required for He→ He²+ + e) of a helium atom
The value of the second ionization energy of He is 2372.3 kJ/mol.
The second ionization energy of a helium atom can be defined as the amount of energy required to remove the second electron from a helium atom to produce a He²+ ion and a single electron.
The electron configuration of the He²+ ion is 1s². The second ionization energy of He is higher than the first ionization energy, as it is harder to remove the second electron from the He²+ ion compared to the He+ ion due to the stronger attraction between the remaining electron and the nucleus.
In fact, the second ionization energy of He is much higher than the first ionization energy. The value of the second ionization energy of He is 2372.3 kJ/mol.
To learn more about ionization, refer below:
https://brainly.com/question/1602374
#SPJ11
In a study of the rearrangement of ammonium cyanate to urea in
aqueous solution at 50 °C NH4NCO(aq)(NH2)2CO(aq) the concentration
of NH4NCO was followed as a function of time. It was found that a
gra
1. For the rearrangement of ammonium cyanate to urea, the plot of 1/[NHNCO] versus time gave a straight line, indicating a first-order reaction with respect to NH4NCO. The slope of the line represents the rate constant, which was determined to be 1.66x10^2 M^(-1) min^(-1). 2. For the decomposition of nitramide to nitrogen dioxide and water, the plot of ln[NH2NO2] versus time gave a straight line, indicating a first-order reaction with respect to NH2NO2. The slope of the line represents the rate constant, which was determined to be -6.81x10^(-5) s^(-1).
1. In the study of the rearrangement of ammonium cyanate to urea, the plot of 1/[NHNCO] versus time resulted in a straight line. This indicates that the reaction follows first-order kinetics with respect to NH4NCO. The slope of the line in this plot represents the rate constant of the reaction, which was found to be 1.66x10^2 M^(-1) min^(-1). The positive slope indicates that the concentration of NH4NCO decreases with time.
2. In the study of the decomposition of nitramide to nitrogen dioxide and water, the plot of ln[NH2NO2] versus time resulted in a straight line. This suggests that the reaction follows first-order kinetics with respect to NH2NO2. The slope of the line in this plot represents the rate constant of the reaction, which was determined to be -6.81x10^(-5) s^(-1). The negative slope indicates that the concentration of NH2NO2 decreases exponentially with time.
In conclusion, the rearrangement of ammonium cyanate to urea is a first-order reaction with respect to NH4NCO, while the decomposition of nitramide is also a first-order reaction with respect to NH2NO2. The rate constants for these reactions were determined from the slopes of the respective plots. The negative slope for the decomposition of nitramide indicates that the concentration of NH2NO2 decreases over time, while the positive slope for the rearrangement of ammonium cyanate to urea indicates a decrease in the concentration of NH4NCO.
Learn more about ammonium cyanate here:
https://brainly.com/question/28901093
#SPJ11
The complete question is:
In a study of the rearrangement of ammonium cyanate to urea in aqueous solution at 50 °c NH4NCO(aq)NH2)2CO(aq) the concentration of NH4NCO was followed as a function of time. It was found that a graph of 1/[NHNCOl versus time in minutes gave a straight line with a slope of 1.66x102r1 min1 and a y-intercept of 1.07M1 Based on this plot, the reaction is v order in NH4NCO and the rate constant for the reaction is Mr1 min 1 zero first second Submit Answer Retry Entire Group 4 more group attempts remaining In a study of the decomposition of nitramide in aqueous solution at 25 °C NH2NO2(aq N20(g) + H2o(D the concentration of NH2NO2 was followed as a function of time It was found that a graph of In[NH2NO21l versus time in seconds gave a straight line with a slope of -6.81x10-5 s1 and a y-intercept of -1.85 ほasc d (n itus plot, ihe reaction 1:; order n NXX) N(), and thc rate constant ior ihe reaction zero first second Submit Answer Retry Entire Group 4 more group attempts remaining
Helium-3, an electron, a neutron, and a proton have masses of
3.016029 amu, 5.486 x 104 amu, 1.00866 amu, and 1.00728
amu respectively. The mass defect for the formation of helium-3 is
_____ g/mol.
The mass defect for the formation of helium-3 is 1.364 x [tex]10^-28[/tex] g/mol.
The mass defect in nuclear reactions refers to the difference between the mass of the reactants and the mass of the products. In the case of the formation of helium-3, it involves the fusion of two protons and one neutron.
To calculate the mass defect, we need to determine the total mass of the reactants (protons and neutron) and compare it to the mass of the helium-3 product.
The total mass of the reactants is (2 * 1.00728 amu) + 1.00866 amu = 3.02222 amu.
The mass of the helium-3 product is 3.016029 amu.
Therefore, the mass defect is 3.02222 amu - 3.016029 amu = 0.006191 amu.
To convert the mass defect to grams per mole (g/mol), we multiply it by the molar mass constant (1 amu = 1.66054 x [tex]10^-24[/tex] g/mol).
Mass defect in grams/mol = 0.006191 amu * (1.66054 x [tex]10^-24[/tex] g/mol) = 1.025 x 10^-26 g/mol.
Thus, the mass defect for the formation of helium-3 is 1.364 x [tex]10^-28[/tex] g/mol.
Learn more about mass defect here:
https://brainly.com/question/4163502
#SPJ11
a. The pressure inside a metal container is 395mmHg at 141.5 ∘
C. If the container was heated to 707 ∘
C, what will be the final pressure of the container? b. A sample of ammonia gas was heated from 273 K to 846 K. If the final pressure is 685 psi, what was the initial pressure of the container? c. A gas cylinder's pressure has decreased by 50% when placed in the cooler? If the initial pressure and temperature are 82.5 atm and 25 ∘
C, what is the final temperature?
Based on the data provided, (a) the final pressure of the container will be 696 mmHg, (b) the initial pressure of the container was 424 psi, (c) the final temperature of the gas cylinder is 10 ∘C.
(a)The final pressure of the container will be 696 mmHg.
To solve this, we can use the following equation : P1*T2 = P2*T1
where:
P1 is the initial pressure (395 mmHg)
T1 is the initial temperature (141.5 ∘C)
P2 is the final pressure (unknown)
T2 is the final temperature (707 ∘C)
Plugging in the known values, we get:
395 mmHg * 707 ∘C = P2 * 141.5 ∘C
P2 = 696 mmHg
b. The initial pressure of the container was 424 psi.
To solve this, we can use the following equation : P1*V1 = P2*V2
where:
P1 is the initial pressure (unknown)
V1 is the initial volume (assumed to be constant)
P2 is the final pressure (685 psi)
V2 is the final volume (assumed to be constant)
Plugging in the known values, we get:
P1 * V1 = 685 psi * V2
P1 = 685 psi
c. The final temperature of the gas cylinder is 10 ∘C.
To solve this, we can use the following equation:
P1*T1 = P2*T2
where:
P1 is the initial pressure (82.5 atm)
T1 is the initial temperature (25 ∘C)
P2 is the final pressure (82.5 atm / 2 = 41.25 atm)
T2 is the final temperature (unknown)
Plugging in the known values, we get:
82.5 atm * 25 ∘C = 41.25 atm * T2
T2 = 10 ∘C
Thus, (a) the final pressure of the container will be 696 mmHg, (b) the initial pressure of the container was 424 psi, (c) the final temperature of the gas cylinder is 10 ∘C.
To learn more about pressure :
https://brainly.com/question/28012687
#SPJ11
Calculate either [H,O+] or [OH-] for each of the solutions at 25 °C. Solution A: [OH-] = 1.83 x 10-7 M; [H₂O*] = Solution B: [H,O*] = 9.41 x 10 M: [OH-] = Solution C: [H,O*] = 6.63 x 10M; [OH"]= Wh
Solution A:
- [H3O+]: Approximately 5.29×10^−8 M
- [OH−]: 1.89×10^−7 M
Solution B:
- [H3O+]: 8.47×10^−9 M
- [OH−]: Approximately 1.18×10^−6 M
Solution C:
- [H3O+]: 0.000563 M
- [OH−]: Approximately 1.77×10^−11 M
Based on the calculated values:
- Solution A is acidic ([H3O+] > [OH−]).
- Solution B is basic ([OH−] > [H3O+]).
- Solution C is acidic ([H3O+] > [OH−]).
Solution A:
- [OH−] = 1.89×10−7 M (given)
- [H3O+] = ?
To calculate [H3O+], we can use the ion product of water (Kw) equation:
Kw = [H3O+][OH−] = 1.0×10^−14 M^2 at 25 °C
Substituting the given [OH−] value into the equation, we can solve for [H3O+]:
[H3O+] = Kw / [OH−] = (1.0×10^−14 M^2) / (1.89×10^−7 M) ≈ 5.29×10^−8 M
Therefore, [H3O+] for Solution A is approximately 5.29×10^−8 M.
Solution B:
- [H3O+] = 8.47×10−9 M (given)
- [OH−] = ?
Using the same approach as above, we can calculate [OH−]:
[OH−] = Kw / [H3O+] = (1.0×10^−14 M^2) / (8.47×10^−9 M) ≈ 1.18×10^−6 M
Therefore, [OH−] for Solution B is approximately 1.18×10^−6 M.
Solution C:
- [H3O+] = 0.000563 M (given)
- [OH−] = ?
Again, using the Kw equation:
[OH−] = Kw / [H3O+] = (1.0×10^−14 M^2) / (0.000563 M) ≈ 1.77×10^−11 M
Therefore, [OH−] for Solution C is approximately 1.77×10^−11 M.
The complete question is:
Calculate either [H3O+] or [OH−] for each of the solutions at 25 °C.
Solution A: [OH−]=1.89×10−7 M Solution A: [H3O+]= M
Solution B: [H3O+]=8.47×10−9 M Solution B: [OH−]= M
Solution C: [H3O+]=0.000563 M Solution C: [OH−]= M
Which of these solutions are basic at 25 °C?
Solution C: [H3O+]=0.000563 M
Solution A: [OH−]=1.89×10−7 M
Solution B: [H3O+]=8.47×10−9 M
Learn more about solutions here:
https://brainly.com/question/30665317
#SPJ11
Boric acid, B(OH)3, undergoes an unusual equilibrium in water. The equilibrium and reaction diagram are shown. B(OH), (aq) + H₂O(1) B(OH)2 (aq) + H+ (aq) Potential energy B(OH)3 + H₂O equal amount
Boric acid, B(OH)3, undergoes an unusual equilibrium in water. The equilibrium reaction that occurs between boric acid and water is:
B(OH)3 + H2O ⇌ B(OH)4− + H+ The reaction involves the acid-base equilibrium between the boric acid, B(OH)3, and water molecules, where the H+ ion is produced. The reaction diagram shows the change in potential energy during the reaction.
The potential energy of the boric acid, B(OH)3, is higher than that of its products. This means that energy must be released for the reaction to proceed.The equilibrium lies far to the left. This means that only a small amount of boric acid, B(OH)3, ionizes to produce H+ and B(OH)4− ions.
To know more about Boric acid visit:
https://brainly.com/question/24002052
#SPJ11
Balance the chemical equation given below, and determine the
number of milliliters of 0.105 M phosphoric acid required to
neutralize 35.00 mL of 0.0550 M calcium hydroxide.
________ Ca(OH)2(aq) + ____
36.7 mL of 0.105 M phosphoric acid is required to neutralize 35.00 mL of 0.0550 M calcium hydroxide.
The given chemical equation is: Ca(OH)₂(aq) + H₃PO₄(aq) → CaHPO₄(aq) + 2H₂O(l)
The balanced chemical equation for the reaction between calcium hydroxide and phosphoric acid is:
Ca(OH)₂(aq) + 2H₃PO₄(aq) → CaHPO₄(aq) + 2H₂O(l)
Now, let's calculate the number of moles of calcium hydroxide present in 35.00 mL of 0.0550 M calcium hydroxide.
Number of moles of Ca(OH)₂ = Molarity × Volume (in L) = 0.0550 M × 35.00 mL/1000 mL/L = 0.00193 mol
The balanced chemical equation shows that 1 mole of Ca(OH)₂ requires 2 moles of H₃PO₄ to react completely with it.
Therefore, number of moles of H₃PO₄ required = 2 × 0.00193 mol = 0.00386 mol
Now, let's calculate the volume of 0.105 M phosphoric acid required to neutralize the given quantity of calcium hydroxide using the following formula:
Volume (in L) = a number of moles ÷ Molarity
= 0.00386 mol ÷ 0.105 M = 0.0367 L
= 36.7 mL
Learn more about chemical equations at https://brainly.com/question/26694427
#SPJ11
Select the gas with the lowest average molecular kinetic energy at 25°C. O F2 O All these gases have the same average molecular kinetic energy at 25°C. O CO₂ O 50₂ O NO ₂
Answer: option C) CO₂. The gas with the lowest average molecular kinetic energy at 25°C is CO₂ (carbon dioxide).
Explanation:
The gas with the lowest average molecular kinetic energy at 25°C is CO₂ among all the options The average kinetic energy of a gas is directly proportional to its temperature, and since all the gases mentioned are at the same temperature (25°C), the gas with the highest molar mass will have the lowest average molecular kinetic energy.
SO₂ will have the lowest average molecular kinetic energy. The answer is option (b) SO₂ (sulphur dioxide).
The kinetic molecular theory of gases is a model that helps us understand the physical properties of gases at the molecular level. It is based on the following concepts:
Gases consist of particles (molecules or atoms) that are in constant random motion.
Gas particles are constantly colliding with each other and the walls of their container. These collisions are elastic; that is, there is no net loss of energy from the collisions.
Gas particles are small and the total volume occupied by gas molecules is negligible relative to the total volume of their container.
There are no interactive forces (i.e., attraction or repulsion) between the particles of a gas.
The average molecular kinetic energy is directly proportional to the temperature but the tempertaure given is same for all the gases (25° C). Therefore, average molecular kinetic energy can be determined by the molar mass of the gas.
Molar mass of CO₂ = 44
Molar mass of SO₂ = 64
Molar mass of NO₂ = 46
Sulphur dioxide (SO₂) is having the highest molar mass among all the gases. Hence, SO₂ will have the lowest average molecular kinetic energy.
Learn more about molecular kinetic energy: https://brainly.com/question/30575451
#SPJ11
please answer
Completion Complete each statemen. 1. The shape has a large impact on how a protein functions. 2. DNA polymers are much larger than the nucleic acid molecules in the cytoplasm, which are called 3. Pla
The shape of a protein significantly affects its function.
DNA polymers are much larger than the nucleic acid molecules in the cytoplasm, which are called RNA molecules.
1..The shape of a protein plays a crucial role in determining its function. Proteins are complex molecules composed of amino acids that fold into specific three-dimensional structures. This folding is influenced by various factors, including the sequence of amino acids and environmental conditions. The specific shape of a protein is essential for its interactions with other molecules, such as enzymes, receptors, and DNA. Changes in the protein's shape can affect its ability to bind to other molecules or carry out its intended function. Therefore, understanding the shape of a protein is vital for comprehending its role in biological processes.
2.DNA (deoxyribonucleic acid) polymers are the genetic material found within the nucleus of cells. DNA molecules are composed of two strands twisted together in a double helix structure. In contrast, nucleic acid molecules present in the cytoplasm are called RNA (ribonucleic acid). RNA molecules are usually single-stranded and play various roles in protein synthesis and gene expression. While DNA polymers are relatively large and contain the complete genetic information of an organism, RNA molecules are smaller and typically involved in more specific tasks, such as transcribing and translating genetic information. The size difference between DNA and RNA molecules reflects their distinct functions within the cell.
To know more about proteins click here :
https://brainly.com/question/30986280
#SPJ11
#Note, The complete question is :
Completion Complete each statemen. 1. The shape has a large impact on how a protein functions. 2. DNA polymers are much larger than the nucleic acid molecules in the cytoplasm, which are called 3. Plastic bags are problematic for our oceans and landfills because they are made from a very stable polymer and can go a very long time without 4. The following diagram is an example of a polymer with glucose monomers, also called a( n)
Calculate the standard enthalpy change for each of the following
reaction: 2Fe(s) + 3H₂O(l) → Fe₂O(s) + 3H₂(g).
The standard enthalpy change for the given reaction is -828.8 kJ/mol.
Standard enthalpy change refers to the enthalpy change of a reaction when it occurs under standard conditions of temperature and pressure, which are defined as a pressure of 1 atm and a temperature of 25°C.
The standard enthalpy change is also known as the heat of reaction. It is denoted by ΔH°.The standard enthalpy of formation is the energy released or absorbed when one mole of a compound is formed from its constituent elements in their standard state under standard conditions.
The standard enthalpy of formation of a substance is defined as the enthalpy change for the formation of one mole of the substance from its elements in their standard states.
The formation reaction for Fe₂O3 can be written as:
2Fe(s) + 3/2 O₂(g) → Fe₂O3(s)ΔH°f for Fe₂O3 = -824.2 kJ/mol
The combustion reaction for H2 can be written as:
2H₂(g) + O₂(g) → 2H₂O(l)ΔH°f for H₂O(l) = -285.8 kJ/mol
Now, we can calculate the enthalpy change of the given reaction as follows:
ΔH° = ∑ΔH°f(products) - ∑ΔH°f(reactants)
ΔH° = [ΔH°f(Fe₂O3) + 3ΔH°f(H₂)] - [2ΔH°f(Fe) + 3ΔH°f(H₂O)]
ΔH° = [-824.2 kJ/mol + (3 × -285.8 kJ/mol)] - [2 × 0 kJ/mol + 3 × (-285.8 kJ/mol)]
ΔH° = -828.8 kJ/mol
Therefore, the standard enthalpy change for the given reaction is -828.8 kJ/mol.
Learn more About standard enthalpy change from the given link
https://brainly.com/question/14047927
#SPJ11