Average acceleration of an object is the:

Change in its position divided by the change in time
Change in time divided by the change in its position
Change in its velocity divided by the change in time
Change in time divided by the change in its velocity

Answer:

This is what I got the teacher hasn’t graded it yet so sorry if it’s not right

Explanation:

Answer:

I may be a little late, but it's A i got it right on the exam

Explanation:

All of the following will help you safely cool foods except after a meal put leftovers in a deep container so the food cools down more slowly, therefore the correct answer is option A.

What is thermal energy?

It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.

The option that will help you safely cool foods is by putting cold foods away immediately after purchasing, Nestle a bowl of cold food in a slightly larger bowl of ice during a picnic, and Transferring cold foods directly from the refrigerator to the cooler when going out.

The right response is A, option a since all of the options will help you safely cool meals, with the exception of putting leftovers in a deep container after a meal to allow them to cool more slowly.

To learn more about thermal energy here, refer to the link given below ;

brainly.com/question/3022807

#SPJ2

Answer:

Graphite.

Explanation:

Graphite: "a gray crystalline allotropic form of carbon which occurs as a mineral in some rocks and can be made from coke. It is used as a solid lubricant, in pencils, and as a moderator in nuclear reactors."

Explanation:

by finding the distance between two successful crest

Answer:

the wavelength can be measured as the distance from crest to crest  or from trough to trough , the wavelength of a wave can be measured as the distance from a point on a wave to the corresponding point on the next cycle of the wave.

Explanation:

Answer: I'm sure the answer is a.

Explanation: I hope that helped you.

Answer:

Precipitate

Explanation:

Answer:

Explanation:

ok it's correct

Answer:

9.8 m/s/s

Explanation:

The horizontal velocity of a projectile is constant (a never changing in value), There is a vertical acceleration caused by gravity; its valueis 9.8 m/s/s, down, The vertical velocity of a projectile changes by 9.8 m/s each second, Thehorizontal motion of a projectile is independent of its vertical motion.

Answer:

the horizontal component of the velocity, however, retains its initial value v0x=+115 m/s throughout the entire descent.

Explanation:

since the plane also travels at a constant horizontal velocity of +115 m/s, it remains directly above the falling package.

Explanation:

Average velocity indicates direction and can be represented as a negative number when the displacement is in the negative direction. Average speed does not indicate direction and can only be positive or zero.

Answer:

(a) -6.67 [tex]m/s^2[/tex]

(b) 0.68

Explanation:

Given that the mass of the truck, [tex]m_1=8000[/tex] kg.

Mass of the package, [tex]m_2=3000[/tex] kg.

As the package does not slide, so the acceleration of both, truck as well as the package, is the same.

Let [tex]a\;\; m/s^2[/tex] is the acceleration of the combined mass, m.

[tex]m=m_1+m_2= 8000+3000=11000[/tex] kg.

The initial velocity of the combined mass, u= 20 m/s.

Time required to stop, t=3 seconds.

Final velocity, v=0.

Displacement traveled, s=50 m.

(a) As  [tex]a=\frac {v-u}{t}[/tex]

[tex]\Rightarrow a=\frac{0-20}{3}=-\frac{20}{3} =6.67 m/s^2[/tex]

Hence the acceleration of the truck is [tex]-6.67 m/s^2.[/tex]

(b) Now, [tex]a=-6.67 m/s^2[/tex] is the acceleration of the package, this acceleration is due the frictional force, f.

Due to inertia, on application of break, the package have tendency to slide to left (in  the direction of velocity). But the package does not slides, this is only due to the frictional force, f, which acts in the right direction ( opposite to the direction of velocity).

So, the magnitude of frictional force required on [tex]m_2[/tex]  to avoid slide is

[tex]f=|m_2a|=\frac{20}{3}m_2\times(i)[/tex]

Now, let \mu be the minimum coefficient of the friction, so

The force due to friction, [tex]f_r= \mu N[/tex],

where [tex]\mu N[/tex] is the normal reaction.

[tex]N=m_2g[/tex], where g is the acceleration due to gravity.

So, [tex]f_r=\mu m_2g\cdots(ii)[/tex]

To avoid slide, [tex]f_r\geq f[/tex]

[tex]\Rightarrow \mu m_2g\geq\frac{20}{3}m_2[/tex] [from (i)and (ii)]

[tex]\Rightarrow \mu\geq \frac{20}{3\times 9.81}[/tex]    [tex][ as \;g=9.81 m/s^2][/tex]

[tex]\Rightarrow \mu \geq 0.68[/tex]

Hence, the minimum value of coefficient of friction between packages and the truck os 0.68.

Answer:

D. The skier's weight, the force of friction between the skis and snow,

and the force of air resistance

Explanation:

If two objects, such as the the skier, and skies undergo a fast velocity downward, the net force is the total force or newtons which are all components of weight as apparent to mass and gravity, friction, which is the contact force of the skis on the snow, and air resistance which limits the air resistance is the opposite force acting on the object I'm the air relative to the density of air, cross sectional area of the object, the coefficient of drag which is based on the density of the object, it's area, and dynamic air pressure.

Answer:

Candle

Explanation:

The moon is an illuminated object, while a candle is a luminous object!

Answer:

Candle

Explanation:

I just took the test

Answer:

Consensus: the extent to which other people behave in the same way in a similar situation.

Consistency: refers to the way in which minority influence is more likely to occur if the minority members share the same belief and retain it over time.

Distinctiveness: refers to the extent to which a specific action engaged in by an individual is unusual or uncommon for that particular individual

Answer:

It would be cut in half.

Explanation:

If the momentum of the ball is cut into half, the velocity will also be halved.

The momentum of a body is the amount motion a body possess.

Momentum is given as;

       momentum= m x v

Given that;

 mass  = 1kg

 velocity  = 12m/s

Now find the momentum;

            momentum  = 1 x 12 = 12kgm/s

Halving the momentum = 6kgm/s

              mass = 1kg

 Momentum  = 1 x v

       6  = 1 x v

           v  = 6m/s

We see that the velocity reduces by half

Answer:

It would be doubled.

Explanation:

I'm in K12

Answer:

force=1250kg * 30m/s+10

Explanation: it's a change in acceleration

Answer:

Negatively charged, to positively charged parts

Explanation:

Electrons are negative, negative is attracted to positive.

Answer:

it would have to be diagram C OR B

Answer:

tura paulo

Explanation:

sry if im wrong ;)

Answer:

A................

Explanation:

Hope this helps you

A. increase it's current and increase it's voltage

Explanation:

Answer:

C.) the mass of mars is less than the mass of earth.

Explanation:

The more mass of the planet, the stronger the gravitational pull is. The rover will seem lighter on mars because there is less gravity pulling it onto the planet.

The mass of mars is less than the mass of earth.

The more mass of the planet, the stronger the gravitational pull is. The rover will seem lighter on mars because there is less gravity pulling it onto the planet.

Earth, the third planet from the Sun, is the planet where all known life is found. Although the Solar System contains enormous amounts of water, only Earth is home to liquid surface water.

The ocean covers roughly 70.8% of Earth's surface, dwarfing the polar ice, lakes, and rivers. Earth's surface is made up of continents and islands for the remaining 29.2% of its total area.

Therefore, The mass of mars is less than the mass of earth.

To learn more about Earth, refer to the link:

https://brainly.com/question/12041467

#SPJ2

Answer:

Explanation:

3. Newton’s third law explains how every action has an equal but opposite reaction, meaning that forces comes in pairs. While the locomotive’s wheels are pushing back against the ground as the action force, the ground is producing a reaction force towards the locomotive, propelling it forward. Another pair of forces that act on the locomotive is gravity and normal force. While gravity is pulling the locomotive towards the ground, the normal force the ground exerts on the locomotive is why the locomotive doesn’t fall through the ground.

4. The force of Earth’s gravity on the Sun is weaker than the force of the Sun’s gravity on Earth. The Sun’s attraction  affects the motion of Earth more than the Earth’s attraction affects the Sun’s motion because according to  Newton’s second law, force has mass as one of its factors. The Sun has a significantly higher mass than Earth,  meaning that its force of gravity would also be significantly higher. Newton’s third law is why the Earth doesn’t get  marginally closer to the Sun, stating that every action has an equal and opposite reaction. As the Sun is pulling  Earth towards itself, Earth is pulling away from the Sun.

Answer:

I believe gravity is acting on it

Answer:

Rt = 908.25 [ohm]

Explanation:

In order to solve this problem, we must remember that the resistors connected in series are added up arithmetically.

In this case, R2 and R3 are in series therefore.

R₂₃ = 200 + 470

R₂₃ = 670 [ohm]

Now this new resistor (R₂₃) is connected in parallel with the resistor R4. therefore we must use the following arithmetic expression, to add resistances in parallel.

[tex]\frac{1}{R_{4-23} }= \frac{1}{R_{4}}+\frac{1}{R_{23} } \\\frac{1}{R_{4-23} }=\frac{1}{1800}+\frac{1}{670} \\R_{4-23}=488.25[ohm][/tex]

In this way R₁, R₅ and R₄₋₂₃ are connected in series.

Rt = R₁ + R₅ + R₄₋₂₃

Rt = 150 + 270 + 488.25

Rt = 908.25 [ohm]

Answer:

a. The student's mistake was that the student did not swing the pendulum and start the watch at the same time.

b. 1.2 s per swing.

c. The likely effect of her reaction time is that they will should subtract two seconds off the time.

Explanation:

The pupil made the error of not simultaneously starting the watch and swinging the pendulum.

Pendulum is defined as a body that is suspended from a fixed point and moves back and forth while being pulled by gravity. The pendulum is used to gauge the gravitational pull because the force of gravity causes it to swing back toward its average position. A pendulum's time period can be used to tell the time because it is constant.

The swing of the pendulum is 1.2 sec. per swing. They should take two seconds off the timing due to her presumably slow reaction time. A pendulum's total time should be divided by the quantity of oscillations in order to determine its time period. When compared to a pendulum with a shorter string, the one back and forth cycle of a longer-stringed pendulum requires more time to complete.

Thus, the pupil made the error of not simultaneously starting the watch and swinging the pendulum.

To learn more about pupil, refer to the link below:

https://brainly.com/question/27874242

#SPJ2

Answer: a piece of iron near a magnet

Explanation:

Answer:

Explanation:

KHAN ACADEMY

The correct free body diagram is option (B). There will only be two forces acting on cheese B.

By representing the tensional forces by the ropes 1 and 2 as [tex]F_{T1}[/tex] and [tex]F_{T2}[/tex] respectively, the correct free body diagram will be option B.

Learn more about free body diagrams here:

https://brainly.in/question/12953409

Answer:

d = 120 [m]

Explanation:

In order to solve this problem, we must use the theorem of work and energy conservation. Where the energy in the final state (when the skater stops) is equal to the sum of the mechanical energy in the initial state plus the work done on the skater in the initial state.

The mechanical energy is equal to the sum of the potential energy plus the kinetic energy.  As the track is horizontal there is no unevenness, in this way, there is no potential energy.

E₁ + W₁₋₂ = E₂

where:

E₁  = mechanical energy in the initial state [J] (units of Joules)

W₁₋₂ = work done between the states 1 and 2 [J]

E₂  = mechanical energy in the final state = 0

E₁ = Ek = kinetic energy [J]

E₁ = 0.5*m*v²

where:

m = mass = 60 [kg]

v = initial velocity = 12 [m/s]

Now, the work done is given by the product of the friction force by the distance. In this case, the work is negative because the friction force is acting in opposite direction to the movement of the skater.

W₁₋₂ = -f*d

where:

f = friction force = 36 [N]

d = distance [m]

Now we have:

0.5*m*v² - (f*d) = 0

0.5*60*(12)² - (36*d) = 0

4320 = 36*d

d = 120 [m]

Answer:

The type of mechanical energy that is possessed due to the virtue of motion or state of a body is known as potential energy.

Its formula: PE= mgh

Its SI unit is joule.

Hope it helps you..

Answer:

a) [tex] y_{max} = 7.7 m [/tex]

b) y = 7.4 m

Explanation:

a) La altura máxima que alcanza la pelota se puede encontrar usando la siguiente ecuación:

[tex] y_{max} = y_{0} + v_{0y}t - \frac{1}{2}gt^{2} [/tex]    (1)

En donde:  

[tex]y_{0}[/tex]: es la altura inicial = 0

[tex]v_{0y}[/tex]: es la velocidad inicial en y

g: es la gravedad = 9.81 m/s²

t: es el tiempo

Primero debemos encontrar la velocidad inicial en y:

[tex] v_{fy} = v_{0y} - gt [/tex]

Sabiendo que la velocidad final en y es igual a cero (en la altura máxima), y con t = 1.25 s (la mitad del tiempo total) tenemos:

[tex] v_{0y} = gt = 9.81 m/s^{2}*1.25 s = 12.3 m/s [/tex]

Ahora, podemos encontrar la altura máxima:

[tex] y_{max} = v_{0y}t - \frac{1}{2}gt^{2} = 12.3 m/s*1.25 s - \frac{1}{2}9.81 m/s^{2}*(1.25 s)^{2} = 7.7 m [/tex]

b) Podemos encontrar la altura cuando t = 1 s con la misma ecuación (1):

[tex]y_{max} = y_{0} + v_{0y}t - \frac{1}{2}gt^{2} = 12.3 m/s*1 s - \frac{1}{2}9.81 m/s^{2}*(1 s)^{2} = 7.4 m[/tex]

Por lo tanto, la pelota se encontraba a 7.4 m luego de 1 segundo despúes del lanzamiento.

Espero que te sea de utilidad!