At which type of boundary is new oceanic crust created?

A. a convergent plate boundary
B. a divergent plate boundary
C. a subduction plate boundary
D. a transform plate boundary​

Answers

Answer 1

Answer:

c.

Explanation:

If the two plates that meet at a convergent plate boundary both are of oceanic crust, the older, denser plate will subduct beneath the less dense plate. The older plate subducts into a trench, resulting in earthquakes. Melting of mantle material creates volcanoes at the subduction zone.

When two oceanic plates converge, the denser plate will end up sinking below the less dense plate, leading to the formation of an oceanic subduction zone. Old, dense crust tends to be subducted back into the earth. An example of a subduction zone formed from a convergent boundary is the Chile-Peru trench….

Answer 2

Answer:

a divergent plate boundary


Related Questions

What type of equilibrium maintains body position during sudden motion?

dynamic
rotational
static
balanced

Answers

I think static is the correct answer

I NEED THE ANSWER ASAPP​

Answers

Answer:

Explanation:

a) The spring force will equal the weight.

b) If up is positive

kx - mg = 0

mg = kx              kx = 25 N

c) m = kx/g = 25/10 = 2.5 kg

Convection currents occur when _________ energy transfers between two parts of a fluid

Answers

Answer:

heat

Explanation:

Four small 0.600-kg spheres, each of which you can regard as a point mass, are arranged in a square 0.400 m on a side and connected by light rods. Find the moment of inertia of the system about an axis through the center of the square, perpendicular to its plane at point O.

Answers

Answer:

.192 kg x m^2

Explanation:

I= mass of a times radius of a squared + mass of b times radius of b squared +...

I= .6 kg x .4m^2 + .6 kg x .4m^2

= .192 kg x m^2

Hope this helps :)

Tectonic plate movement is the reason why northern California has a very different landscape than southern California. Two different tectonic plates, each moving in different directions, border the western side of the North American Plate. Use the map to identify the two tectonic plates that border the North American Plate to the west.

Answers

Answer:

Remember, NORTH ^, EAST >, SOUTH v, WEST <

Explanation:

It doesn't have to be a super complex answer. All you have to do is look to the left (west) of the North American plate. What are the 2 plates that you see? The Pacific and the Juan de Fuca, yeah? To the South, there is the Cocos amongst a few others.

I am not going to share the answer for sure as I haven't completed the test yet but that's how I'm solving it. You should write the answer in your own words anyways. Hope this helps! Have a good day :)

Answer:

The Juan de Fuca Plate and the Pacific Plate both border the west side of the North American Plate.

Explanation:

Edmentum

A 0.035-kg bullet is fired vertically at 214 m/s into a 0.15-kg baseball that is initially at rest. How high does the combined bullet and baseball rise after the collision, assuming the bullet embeds itself in the ball

Answers

Answer:

Explanation:

conservation of momentum during the collision

0.035(214) + 0.15(0) = 0.185v

v = 40.486 m/s

The kinetic energy after impact will convert to gravity potential energy

(ignoring air resistance)

mgh = ½mv²

     h = v²/2g

     h = 40.486² / (2(9.8))

     h = 83.6303...

     h = 84 m

A rollercoaster car passes the hill which is 5.5m above the ground at speed 9.3m/s, and rolls over the second hill which is 2.5m above the ground, and heads toward the third hill which is 4.0 m higher than the first one. If the track is frictionless,
a. What maximum height will the car climb on the third hill? [h max = 9.9m, so car will climb the entire 9.5m hill]
b. Will the speed of the car on top of the hill 3 be lower or higher than its speed on the top of the hill one? [lower]
c. Calculate the speed of the car when it is 1m lower than the top of the third hill. [5.3m/s]

Would somebody kindly go over the questions :D

Answers

Answer:

Explanation:

Without friction, a roller coaster continuously converts potential energy to kinetic energy and back again. Total energy will be constant.

Let m be the mass of the car and ground level is the origin.

on the 5.5 m hill, total energy is

E = PE + KE

E = mgh + ½mv²  

E = m(9.8)(5.5) + ½m(9.3)² = 97m J

a) The maximum height will occur when the total energy is all potential energy.

E = mgh

h = E/mg

h = 97m/m(9.8) = 9.9 m  

As this value is greater than the height of the third hill at 5.5 + 4.0 = 9.5 m The car will cross the last hill with some remaining velocity in kinetic energy.

b) As 9.5 m is greater than 9.3 m, the 9.5 m hill will have more of the total energy of the system as potential energy, This mean there is less kinetic energy and therefore less velocity (and speed) on top of the 9.5 m hill.

c) KE = E - PE

KE = 97m - m(9.8)(9.5 - 1.0)

KE = 97m = 83.3m

KE = 13.7m = ½m

v² = √(2(13.7)

v = 5.2345...

v = 5.2 m/s

Find the dimension of the gravitational constant in this equation F=Gm1m2/r¹r²

Answers

The gravitational force acting between the two bodies is given by:

F=G

r

2

m

1

m

2

G=

m

1

m

2

Fr

2

The dimension of the force is [MLT

−2

]

=

[M][M]

[MLT

−2

][L

2

]

=M

−1

L

3

T

−2

A flywheel with a diameter of 0.692 m is rotating at an angular speed of 208 rev/min. (a) What is the angular speed of the flywheel in radians per second

Answers

[tex]\omega = 21.8\:\text{rad/s}[/tex]

Explanation:

We know that there are [tex]2\pi[/tex] radians in one revolution and 60 seconds in one minute so we can easily convert the rev/min unit to rad/s using the following conversion factors:

[tex]208\:\dfrac{\text{rev}}{\text{min}}×\dfrac{2\pi\:\text{rad}}{1\:\text{rev}}×\dfrac{1\:\text{min}}{60\:\text{s}}[/tex]

[tex]\;\;\;\;\;=21.8\:\text{rad/s}[/tex]

Velocity and Acceleration Quick Check

C

D

E

During which of the labeled time segments is the object moving forward but slowing down?

(1 point)

Ο Α

0 С

OD

ОВ

Answers

Answer:

Explanation:

1 Object C has an acceleration that is greater than the acceleration for D.

2 B

3 17M

4 The velocity is zero.

5 a straight line with negative slope

just took it

After an unfortunate accident occurred at a local warehouse, you were contracted to determine the cause. A jib crane collapsed and injured a worker. An image of this type of crane is shown in the figure.The horizontal steel beam had a mass of 88.50 kg
per meter of length, and the tension in the cable was =11650 N
. The crane was rated for a maximum load of 500 kg
. If =5.580 m
, =0.522 m
, =1.350 m
, and ℎ=2.070 m
, what was the magnitude of L
(the load on the crane) before the collapse? The acceleration due to gravity is =9.810 m/s2

Answers

The magnitude of the load L on the crane before the collapse is 3211.81 N

To determine the magnitude of the load on the crane (L), we will need to make use of the equilibrium conditions of the torque.

It is always an ideal process to list out all the parameters given as this will let you understand how you can determine the answer to the question from the given parameters.

From the given information;

The tension in the cable = 11650 NThe length (d) = 5.580 mThe mass of the horizontal steel beam (M) = 88.50 kg/m (d)= 88.50 kg/m × 5.580 m= 493.83 kgDistance (s) = 0.522 mx = 1.350 m and h = 2.070 mAcceleration due to gravity = 9.81 m/s²

From the question;

the angle at which the crane is positioned can be determined by taking the tangent of the angle θ. i.e.

[tex]\mathbf{tan \ \theta = \dfrac{h}{d-s}}[/tex]

[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{h}{d-s} \Big )}[/tex]

[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{2.070 }{5.580 - 0.522} \Big )}[/tex]

[tex]\mathbf{\theta =22.26^0}[/tex]

Consider the equilibrium conditions of the torques with respect to the magnitude of the load at point P.

[tex]\mathbf{Tsin \theta (d-s) - W_L (d-x) -(Mg) (\dfrac{d}{2}) = 0}[/tex]

By making the magnitude of the load [tex]\mathbf{W_L}[/tex] the subject of the formula, we have:

[tex]\mathbf{W_L = \dfrac{Tsin \theta (d-x) -(Mg) (\dfrac{d}{2})}{ (d-s) } }[/tex]

[tex]\mathbf{W_L = \dfrac{(11650 )sin (22.26) (5.580-1.350) -(88.50\times 9.81) (\dfrac{5.580}{2})}{ (5.580-0.522) } }[/tex]

[tex]\mathbf{W_L = 3211.81 \ N }[/tex]

Therefore, we can conclude that the magnitude of the load is 3211.81 N

Learn more about the magnitude of an object here:

https://brainly.com/question/24623437?referrer=searchResults

plz answer the question.

Answers

Answer:

a

Explanation:

sana po makatulong <3♡♡

The symbol delta x (x) is used to find what value?

Answers

Answer:

Explanation:

Δx means a change in the magnitude of the x variable, often used in reference to a number line on the horizontal axis of a plot.

The graph of an object's position over time is a horizontal line and y is not equal to 0. What must be true abou
motion? (1 point)
O The acceleration is constant and non-zero.
O The velocity is constant and non-zero.
0 The acceleration is negative
O The velocity is zero.

Answers

Answer:D: the velocity is zero

Explanation:

jshshwjs sbwiwiw910mw s x djjskskekwkq

Answers

Answer:

jsbdhdndmlsusgsbkaksudgnslsosufhbf ffb

A 100 N crate is being pulled at a constant velocity by a rope a 30 degrees to the horizontalas depicted in the diagramFind the force of friction Show your work and explain your reasoning in two to sentences

Answers

Answer:

Explanation:

As the velocity is constant, Net force is zero. This means that the friction force must equal the applied force in the horizontal direction.

Ff = Fcosθ

if we had a coefficient of kinetic friction μ, we could quantify the friction force more precisely.

μN = Fcosθ

μ(mg - Fsinθ) = Fcosθ

μmg = Fcosθ + μFsinθ

100μ = F(cos30 + μsin30)

F = 100μ / (cos30 + ½μ)

Ff = 100μcos30 / (cos30 + ½μ)

A 100 N create is being pulled at a constant velocity by a rope a 30 degrees to the horizontal as depicted in the diagram given in question the force of friction Ff = 100μcos30 / (cos30 + ½μ).

What is force?

A force in physics is an effect that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

As the velocity is constant, Net force is zero. This means that the friction force must equal the applied force in the horizontal direction.

Ff = Fcosθ

if we had a coefficient of kinetic friction μ, we could quantify the friction force more precisely.

μN = Fcosθ

μ(mg - Fsinθ) = Fcosθ

μmg = Fcosθ + μFsinθ

100μ = F(cos30 + μsin30)

F = 100μ / (cos30 + ½μ)

Ff = 100μcos30 / (cos30 + ½μ)

the force of friction Ff, is 100μcos30 / (cos30 + ½μ).

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ5

How do light travels

Answers

Answer:

Light can travel in three ways from a source to another location: (1) directly from the source through empty space; (2) through various media; (3) after being reflected from a mirror.

Explanation:

A child's toy consists of a spherical object of mass 50 g attached to a spring. One end of the spring is fixed to the side of the baby's crib so that when the baby pulls on the toy and lets go, the object oscillates horizontally with a simple harmonic motion. The amplitude of the oscillation is 6 cm and the maximum velocity achieved by the toy is 3.2 m/s . What is the kinetic energy K of the toy when the spring is compressed 4.7 cm from its equilibrium position?

A)The following is a list of quantities that describe specific properties of the toy. Identify which of these quantities are known in this problem.
Select all that apply.
1. force constant k
2. total energy E
3. mass m
4. maximum velocity vmax
5. amplitude A
6. potential energy U at x
7. kinetic energy K at x
8. position x from equilibrium

B)What is the kinetic energy of the object on the spring when the spring is compressed 4.7 cm from its equilibrium position?

C)What is the potential energy U of the toy when the spring is compressed 4.7 cm from its equilibrium position?

Answers

Hi there!

Part A:

The only quantities explicitly given to us are:

3. mass (m)

4. Maximum velocity (vmax)

5. Amplitude (A)

8. Position x from equilibrium

Part B:

To solve, we must begin by calculating the force constant, 'k'.

We can use the following relationship:

[tex]v = \sqrt{\frac{k}{m}(A^2-x^2)[/tex]

We are given the max velocity which occurs at a displacement of 0 m, because the mass is the fastest at the equilibrium point. We can rearrange the equation for k/m:

[tex]\frac{v^2}{(A^2-x^2)} = \frac{k}{m}[/tex]

[tex]\frac{3.2^2}{(0.06^2-0)} = \frac{k}{m} = 2844.44[/tex]

Now, we can find the velocity at 4.7cm (0.047m) using the equation:

[tex]v = \sqrt{(2844.44)(0.06^2-0.047^2)} = 1.989 m/s[/tex]

Plug this value into the equation for kinetic energy:

[tex]KE = \frac{1}{2}mv^2\\\\KE = \frac{1}{2}(0.05)(1.989^2) = \boxed{0.0989 J}[/tex]

Part C:

The potential energy of a spring is given as:

[tex]U = \frac{1}{2}kx^2[/tex]

Find 'k' using the derived quantity above:

[tex]\frac{k}{m} = 2844.44\\\\k = 2844.44m = 142.22 N/m[/tex]

Now, calculate potential energy:

[tex]U = \frac{1}{2}(142.22)(0.047^2) = \boxed{0.157 J}[/tex]

Circuit connections can either be series or parallel. In a_____connections, there is only one path of electrons, loads that are connected have the same current passing through them.​

Answers

Answer:

circuit

Explanation:

Question 3. A wire 25.0cm long lies along the z-axis and carries a current of 9.00A in the +z-direction. The a magnetic field is uniform and has components Bx = -0.242T, By= -0.985, and B2=-0.336. a. Find the components of the magnetic force on the wire? b. What is the magnitude of the net magnetic force on the wire? ​

Answers

a.

The components of the force are Fx = 2.2163 N, Fy = -0.5445 N and Fz = 0 N

The force on a current carrying conductor in a magnetic field is given by F = iL × B where i = current = 9.00 A, L = 25.0 cmk = 0.25 mk (since the conductor is along the z-direction). B = magnetic field. Since B has component Bx = -0.242T, By= -0.985, and Bz = -0.336, B = -0.242i + (-0.985j) + (-0.336)k = -0.242i - 0.985j - 0.336)k.

So, F = iL × B

F = 9.00 A{(0.25 m)k × [-0.242Ti + (-0.985Tj) + (-0.336T)k]T}

F = 9.00 A{(0.25 m)k × (-0.242T)i + (0.25 m)k × (-0.985Tj) + (0.25 m)k × (-0.336T)k]}

F = 9.00 A{-0.0605mT)k × i + (-0.24625 mT)k × j + (-0.084 m)k × k]}

F = 9.00 A{-0.0605mT)j + (-0.24625 mT) × -i + (-0.084 mT) × 0]}

F = 9.00 A{-0.0605mT)j + (0.24625 mT)i + 0 mT]}

F = -0.5445 AmT)j + (2.21625 AmT)i + 0 AmT]}

F = -0.5445j + 2.21625i + 0 k

F = (2.2163i - 0.5445j + 0 k) N

So, the components of the force are Fx = 2.2163 N, Fy = -0.5445 N and Fz = 0 N

b.

The magnitude of the net force on the wire is 2.282 N

The net force F = √(Fx² + Fy² + Fz²)

F = √[(2.2163 N)² + (-0.5445 N)² + (0 N)²)

F = √[(4.912 N)² + 0.2964 N)² + (0 N)²)

F = √[5.2084 N)²

F = 2.2822 N

F ≅ 2.282 N

So, the magnitude of the net force on the wire is 2.282 N

Learn more about force on a current carrying conductor:

https://brainly.com/question/16387830

I need help been struggling on this question

Answers

Answer:

440 m

Explanation:

S=(u+v) t / 2

S = (11+33) × 20/2

S= 44× 20/2

S=440 m

Air is pumped into the tyre to inflate it.
This increases the temperature and the pressure of the air in the tyre.
Use ideas about molecules to explain why the air pressure in the tyre increases. *

Answers

Higher temperature causes molecules to rise to the top of the tire and therefore increase the air pressure in the tire.

A 1-kg mass at the Earth's surface weighs how much

Answers

Answer:

the answer is weight=10N

Answer:

[tex]\boxed {\boxed {\sf 9.8 \ Newtons}}[/tex]

Explanation:

Weight is also called the force of gravity. This force acts on all objects at all times, pulling them down toward the center of the Earth.

It is calculated by multiplying the mass by the acceleration due to gravity.

[tex]F_g=mg[/tex]

The mass of the object is 1 kilogram. This scenario is occurring on Earth, so the acceleration due to gravity is 9.8 meters per second squared.

m= 1 kg g= 9.8 m/s²

Substitute the values into the formula.

[tex]F_g= 1 \ kg *9.8 \ m/s^2[/tex]

Multiply.

[tex]F_g= 9.8 \ kg*m/s^2[/tex]

Convert the units. 1 kilogram meter per second squared is equal to 1 Newton, so our answer of 9.8 kilogram meters per second squared is equal to 9.8 Newtons.

[tex]F_g= 9.8 \ N[/tex]

A 1 kilogram mass at Earth's surface weighs 9.8 Newtons.

2) A rolling disk, mass m and radius R, approaches a step of height R/2 with velocity v. (i) Taking the corner of the step as the pivot point, what is the initial angular momentum of the disk

Answers

The rolling disk's initial angular momentum is mR√[2(gR + v²)]/2

Using the law of conservation of energy, the initial mechanical energy E of the disk equals its final mechanical energy E' as it climbs the step.

So, E = E'

1/2Iω + 1/2mv² + mgh = 1/2Iω' + 1/2mv'² + mgh'

where I = rotational inertia of disk = 1/2mR² where m = mass of disk and R = radius of disk, ω = initial angular speed of disk, v = initial velocity of disk, h = initial height of disk = 0 m, ω' = final angular speed of disk = 0 rad/s (assumung it stops at the top of the step), v' = final velocity of disk = 0 m/s (assumung it stops at the top of the step), and h' = final height of disk = R/2.

Substituting the values of the variables into the equation, we have

1/2Iω² + 1/2mv² + mgh = 1/2Iω'² + 1/2mv'² + mgh'

1/2(1/2mR² )ω² + 1/2mv² + mg(0) = 1/2I(0)² + 1/2m(0)² + mgR/2

mR²ω²/4 + 1/2mv² + 0 = 0 + 0 + mgR/2

mR²ω²/4 + 1/2mv² = mgR/2

R²ω²/4 = gR/2 + 1/2v²

R²ω²/4 = (gR + v²)/2

ω² = 2(gR + v²)/R²

ω² = √[2(gR + v²)/R²]

ω = √[2(gR + v²)]/R

Since angular momentum L = Iω, the rolling disk's initial angular momentum is

L = 1/2mR² ×√[2(gR + v²)]/R

L = mR√[2(gR + v²)]/2

the rolling disk's initial angular momentum is mR√[2(gR + v²)]/2

Learn more about angular momentum here:

https://brainly.com/question/13822610

A mass vibrates back and forth from the free end of an ideal spring of spring constant 20 N/m with an amplitude of 0.30 m. What is the kinetic energy of this vibrating mass when it is 0.30 m from its equilibrium position?

Answers

Hi there!

We can begin by using the work-energy theorem in regards to an oscillating spring system.

Total Mechanical Energy = Kinetic Energy + Potential Energy

For a spring:

[tex]\text{Total ME} = \frac{1}{2}kA^2\\\\\text{KE} = \frac{1}{2}mv^2\\\\PE = \frac{1}{2}kx^2[/tex]

A = amplitude (m)

k = Spring constant (N/m)

x = displacement from equilibrium (m)

m = mass (kg)

We aren't given the mass, so we can solve for kinetic energy by rearranging the equation:

ME = KE + PE

ME - PE = KE

Thus:

[tex]KE = \frac{1}{2}kA^2 - \frac{1}{2}kx^2\\\\[/tex]

Plug in the given values:

[tex]KE = \frac{1}{2}(20)(0.3^2) - \frac{1}{2}(20)(0.3^2) = \boxed{0 \text{ J}}[/tex]

We can also justify this because when the mass is at the amplitude, the acceleration is at its maximum, but its instantaneous velocity is 0 m/s.

Thus, the object would have no kinetic energy since KE = 1/2mv².

describe the motion of objects that are viewed from your reference frame both inside and outside while you travel inside a moving vehicle​

Answers

Answer:

The objects outside the reference frame aren't moving. It appears this way since the vehicle you are inside is moving, but unless the objects are people, animals, or other vehicles, the objects aren't moving.

What is the best description of the distribution of the galaxies that lie within about 200 Mpc of Earth

Answers

Answer: galaxies seem to be set out in a network of filaments, or strings, neighbouring large, empty regions of space that is known as voids!

What is most likely the amount of energy available at a trophic level of primary consumers if the amount of energy available to secondary consumers in that food web is 200 kilocalories?
0 kilocalories
20 kilocalories
200 kilocalories
2,000 kilocalories

Answers

Answer:

200 kilocalories

Explanation:

Velocity and Acceleration Quick Check
Item 1
Use this graph of velocity vs. time for two objects to answer the question.
Item 2
Item 3
С
Item 4
Item 5
D
velocity
time
Which statement makes an accurate comparison of the motions for objects C and D?
(1 point)
lol

Answers

Answer:it’s C

Explanation:

by using graph of velocity vs. time for two objects, Item 4 and Item 5 statement makes an accurate comparison of the motions for objects. thus option C is correct.

What is velocity ?

velocity is the  rate of change of the position of the object with respect to  reference and it is complicated but velocity is basically speeding a particular object in a specific direction.

Velocity is a vector quantity which means both magnitude (speed) and direction are combinedly define define velocity. The SI unit of velocity is meter per second (ms-1) and the magnitude or the direction of velocity of a body changes leads to acceleration.

Speed and velocity are the two closest term but the major difference between speed and velocity is that speed gives us an idea that the object with the faster rate of movement r where as  velocity  speed up as well as  tells us the direction of the body

For more details velocity, visit

brainly.com/question/28738284

#SPJ2

calculate the speed of longitudinal waves in aluminum (assuming the elastic modulus = 6.89 x 10^4 MPa)

Answers

The expression for the speed of waves in materials allows us to find the result for the speed of sound in aluminum is:

Sound speed is:   v = 5050 m / s

The speed of a wave in a material is determined by the relationship between its volumetric modulus and its density, it is given by the expression.

                                   

               v = [tex]\sqrt{ \frac{B}{\rho} }[/tex]  

where v is the speed of the wave in the material (sound), B is the volume modulus and ρ the density.

They indicate that the volumetric or elastic modulus of aluminum is;

            B = 6.89 10⁴ Mpa ( [tex]\frac{10^6 \ Pa}{1 \ MPa}[/tex] ) = 6.89 10¹⁰ Pa

The density of aluminum is tabulated  ρ = 2.7 10³ kg / m³

We calculate.

              v = [tex]\sqrt{ \frac{6.89 \ 10^{10} }{2.7 \ 10^3 }}[/tex]  

              v = 5.05 10³ m / s

In conclusion using the expression for the speed of waves in materials we can find the result for the speed of sound in aluminum is:

     v = 5050 m / s

Learn more about the speed of sound here:  brainly.com/question/6840608

Other Questions
The perimeter of an equilateral triangle is 24 cm. Find the length of each sides Is 34/18 greater or less than or equal to 1 5/6 9.-Cul es el resultado correcto de estaexpresin aritmtica: 14 - 8 + 3( -9-6)+ 27 / 9+ raiz cuadrada 16 - 62 What is the model scientists use to trackenergy movement through an ecosystem?A. A food webB. A food pyramidC. A tipphic map Which of the following illustrates the correct placement of information for a single author book?Select one:a. Author, title, date, publisher, place of publicationb. Title, author, publisher, date, place of publicationc. Author, title publisher, place of publication, dated. Author, title, place of publication, publisher, date What were the effects of Nopoleons reforms in education? How does those reforms affect women differently than men? what are massless particles Susan has a collection of 90 nickels and dimes. If the number of nickels is five times the number of dimes, how many nickels and how many dimes does she have? PLZ!!! HELP!!!!!What is the slope -1/3(2p-9) what does p equal what is the first step of the engineering design process? What is the Slope of the line containing the points (3,4) and (5,6)? Please help after dogs, what is thought to be the first domesticated farm animal? easy one for you folks. which store presents the new york thanksgiving parade (LO 1.6) Insulinis usually broken down during glycolysis.is a hormone released when blood (glucose) is high.is hydrophobic.is released when you are fasting (not eating).is a channel for glucose found in the inner mitochondrial membrane. Match the Tools with the name of the tool.Toolbar OptionsQuestion 1 options:Increase IndentLine SpacingDecrease IndentJustify TextBullet PointsCenter Text1234. 56 1.Prove that AMNO is congruent to AXYZ using triangle congruency theorems.MGiven: ZMLX2N =zYYO NZProve: AMNO = AXYZZI What is the relationship between balancing equations and the law of conservation of matter There are 25 students in a class, and 6 of them will be chosen to go on a fieldtrip. How many ways can these students be chosen?