At what points in the model do the cars have maximum and minimum gravitational potential energy?

Answer:

a pallet of 500 sheets for $3,500

Explanation:

just did the test

Answer: 1.44m/s West

Explanation:

Given the following :

Mass of skater = 60kg

Average force = 240N east

Time of = 0.360 seconds

The Velocity after 0.360seconds

Recall the relation:.

Force(f) * time(t) = mass (m) * (final Velocity(V) - initial velocity(u))

Where ; final Velocity(v) - initial velocity(u) = Magnitude of velocity(V)

Ft = mV

240 × 0.360 = 60 × V

60 × V = 86.4

V = 86.4 / 60

V = 1.44m/s

According to Newton's third law, to every action, there is an equal and opposite reaction.

The action force acts in the eastern direction hitting the wall with a force of 240N, therefore direction after hitting the wall will be in the opposite (western direction) direction, which is the direction of the reaction force

Therefore, velocity is 1.44ms West

Answer:

decrease

Explanation:

as the mass of the cart increase the acceleration of the cart decrease

Explanation:

[tex]a = \frac{change \: in \: velocity}{change \: in \: time} [/tex]

[tex]a = \frac{v - u}{t} [/tex]

[tex]v = 7 {ms}^{ - 1} [/tex]

[tex]u = 15 {ms}^{ - 1} [/tex]

[tex]t = 3 \: seconds[/tex]

[tex]a = \frac{7 - 15}{3} [/tex]

[tex]a = \frac{ - 8}{3} [/tex]

[tex]a = - 2.67 \: {ms}^{ - 2} [/tex]

Answer:

The common groundwater contaminant are fertilizers.

Explanation:

Answer:

The answer would be D( Fertilizers)

Explanation:

A fertilizers or fertilizer is any material of natural or synthetic origin that is applied to soil or to plant tissues to supply one or more plant nutrients essential to the growth of plants. Many sources of fertilizer exist, both natural and industrially produced.

Answer:

4.489 m/s

Explanation:

We are given;

Length of rod;L = 51.4 cm = 0.514 m

When the ball is at the top end, it's velocity will be zero and it's kinetic energy will be transformed to potential energy.

Thus; ½mv² = mgh

m will cancel out to give;

v² = 2gh

Where:

g is acceleration due to gravity = 9.8 m/s²

h is the maximum height of the ball which is equal to twice the length of the rod.

Thus, h = 2(0.514) = 1.028 m

v² = 2 × 9.8 × 1.028

v = √20.1488

v = 4.489 m/s

Answer: The final Velocity, V, of the car is 7.9m/s

Explanation:

Given the following :

Toy car starts from rest, therefore,

Initial Velocity (u) = 0

Acceleration (a) = 1.5m/s^2 E for time, t = 5.25s

Final velocity (V) of the car =?

Using the motion equation:

v = u + at

Where v = final Velocity

u = Initial Velocity

a = acceleration

t = time

v = 0 + 1.5(5.25)

v = 0 + 7.875

v = 7.875m/s

v = 7.9m/s

Copper is a reddish orange, soft metal with a bright metallic luster. It is an excellent conductor of heat and electricity. Copper surfaces when exposed to air gradually turns to a dull, brownish color.

Answer:

86.17m/s

Explanation:

Since the motion is of constant acceleration, we can use one of the equations of motion as follows;

v² = u² + 2as

Where;

v = final velocity of the airplane

u = initial velocity of the airplane

s = distance covered by the plane

a = acceleration

From the question,

u = 15m/s

s = 600m

a = 6m/s²

Substitute these values into the equation above as follows;

v² = 15² + 2(6)(600)

v² = 225 + 7200

v² = 7425

v = √7425

v  = 86.17m/s

Therefore, the final velocity of the airplane is 86.17m/s

Answer:

I = 2.61 A

Explanation:

It is given that,

Power of a toaster is 300 watts

It is plugged into an outlet with a voltage of 115 volts

We need to find the current in the toaster's circuit.

The electrical power is given by the formula as follows :

P = V I

I is electric current

[tex]I=\dfrac{P}{V}\\\\I=\dfrac{300}{115}\\\\I=2.61\ A[/tex]

So, 2.61 A of current is in the toaster's circuit.

Answer: D.

2.61 amps

Explanation: edmentum

Answer:

n = 3.1x10¹²

Explanation:

To find the number of electrons we need to find first the charge (q):

[tex] I = \frac{q}{\Delta t} \rightarrow q = I*\Delta t [/tex]    (1)

Where:

I: is the electric current = 0.59 A

t: is the time

The time t is equal to:

[tex]v = \frac{\Delta x}{\Delta t} \rightarrow \Delta t = \frac{\Delta x}{v}[/tex]   (2)

Where:

x: is the displacement

v: is the average speed = 2.998x10⁸ m/s

The displacement is equal to the perimeter of the circumference:

[tex] \Delta x = 2\pi*r = \pi*d [/tex]     (3)

Where d is the diameter = 80.0 m

By entering equations (2) and (3) into (1) we have:

[tex]q = I*\Delta t = I*\frac{\Delta x}{v} = \frac{I\pi d}{v} = \frac{0.59 A*\pi*80.0 m}{2.99 \cdot 10^{8} m/s} = 4.96 \cdot 10^{-7} C[/tex]      

Now, the number of electrons (n) is given by:

[tex] n = \frac{q}{e} [/tex]

Where e is the electron's charge = 1.6x10⁻¹⁹ C  

[tex] n = \frac{q}{e} = \frac{4.96 \cdot 10^{-7} C}{1.6 \cdot 10^{-19} C} = 3.1 \cdot 10^{12} [/tex]

Therefore, the number of electrons in the beam is 3.1x10¹².

I hope it helps you!

Answer: B. Carbon dioxide and water

Explanation: Combustion simply refers to burning. A combustion reaction may thus be explained as a chemical process which involves the reaction between a substance and an oxidizer usually oxygen gas. The combustion reaction in most cases involves the reaction between hydrocarbons which are combustible compounds and oxygen gas. The reaction between the combustible compound and oxygen gas is then followed by the release of energy, with the product being carbondioxid and water. Below is an example of combustion reaction.

Combustion the Methane CH4.

Here, CH4 reacts with oxygen gas(O2) to produce carbondioxide and water.

CH4 + 2O2 ------> CO2 + 2H2O

Answer:

Correct answer B

Explanation:

Just took quiz

Answer:

Explanation:

1. Mechanical waves require material medium for their propagation while electromagnetic waves do not require material medium for their propagation.

2. Mechanical waves can either be transverse or longitudinal while electromagnetic waves are transverse.(Transverse waves are waves in which the vibration of the particules of the medium is perpendicular to the direction of the motion of wave. E.g water waves, waves of a plucked string and all electromagnetic waves RIVUXG . Longitudinal waves are waves whose vibration are parallel to the direction of the motion of the medium e.g waves in strings, sound waves.e.t.c)

Answer and Explanation:

Given that

v_f = 5 km/s = 5,000 m/s

d = 4 m

v_i = 0 m/s

The computation is shown below:

1. The acceleration in m/s is

Here we use the motio third equation which is

[tex]v_f^2 = v_i^2 + 2ad[/tex]

5000^2 = 0^2 + 2 (a) (4)

So

[tex]a = 3.125 \times 10^{6} m/s^2[/tex]

2. Now acceleration in g is

[tex]= \frac{3.125 \times 10^{6} m/s^2}{9.81}[/tex]

[tex]= 3.18 \times 10^{5}g[/tex]

3. The long of acceleration last is

[tex]t = \frac{v-u}{a}[/tex]

[tex]= \frac{5000 - 0}{3.125 \times 10^{6}}[/tex]

[tex]= 1.6 \times 10^{-3}s[/tex]

4.As we can see that

[tex]3.18 \times 10^{5}[/tex] is smaller than the [tex]4.5 \times 10^{5}g[/tex]

So, it should not be ruled out

Light bends away from the normal, because it's moving from higher to lower refractive index.

Same bend-direction as when it goes from water into air.

Answer:

28.39 g

Explanation:

D= m ÷ v

So, M= D × V

0.835 × 34= 28.39

Answer:

C. 28.39 g

Explanation:

took the test<3

Explanation:

If Team A is on the left, B is on the right

if the force is constant, it means that the effort applied is equal.

So Team B is pulling 5000N to the right.

Answer:

Option A - Because of Newton's first law of motion

Explanation:

This is as a result of Newton's first law of motion.

Newton's first law of motion which is also referred to as the law of inertia states that; an object at rest will remain at rest and an object in motion will remain in motion with the same speed and in the same direction unless it's acted upon by an unbalanced force.

In this question, the car is at rest and it doesn't move because the upward force of the car is balanced by the downward pull of gravity. It can only move when an external force is applied to it. This fulfills Newton's first law of motion.

Answer:

A balloon can be defined as an inflatable flexible bag filled with a gas, such as helium, hydrogen, nitrous oxide, oxygen, or air.

Explanation:

plzz mark brainliest

Answer:

The temperature at the top is -39.5 degree

Explanation:

The height of Mt Everest = 8850 m

The base is at the elevation of = 5400 m

The drop in temperature = 1 degree per 100 m

At the base, the temperature = -5

Since every 100 meter rise in height results in the one degree drop of temperature. Therefore, first find the difference between the base and height. Multiply with negative one.

Difference in heights = 8850 – 5400 = 3450

The temperature at the top = (3450 / 100) + 5 = -39.5 degree

Since there is fall in temperature so we use negative sign.

Given that,

Weight = 0.75 N

Acceleration due to gravity = 9.81 m/s²

Density of water = 1 g/ml

We need to calculate the volume of water

Using formula of weight

[tex]W=mg[/tex]

[tex]W=\rho Vg[/tex]

[tex]mg=\rho\times V\times g[/tex]

Where, V = volume

g = acceleration

m = mass

Put the value into the formula

[tex]0.076\times 9.8\times10^3=1\times V\times9.8[/tex]

[tex]V= \dfrac{0.076\times 9.8\times10^3}{1\times9.8}[/tex]

[tex]V=76\ ml[/tex]

Hence, The volume of water is 76 mL.

Answer:

76.5mL

Explanation:

w = mg

0.75N = m * 9.81

m = 0.75 / 9.81 = 0.0765 kg

The mass in grams is 0.0765 * 1000 = 76.5g

At a density of 1 g/mL,

76.5g ÷ 1g/ml = 76.5mL

This question is incomplete because the options are missing; here is the complete question:

Study the image of the Earth's layer which statement correctly compares the thicknesses of earths layers

A. Earth’s mantle is thinner than its oceanic crust.

B. Earth’s outer core is thicker than its mantle.

C. Earth’s continental crust is thicker than its lithosphere.

D. Earth’s lithosphere is thinner than its asthenosphere.

The answer to this question is D. Earth’s lithosphere is thinner than its asthenosphere.

Explanation:

The image shows the different layers that are part of Earth, as well as the thickness of each layer, in kilometers. In this, the thickest layer is the Mantle that is almost 2900 kilometers; this is followed in thickness by the outer and the inner core.

Additionally, other layers such as the continental/oceanic crust, the asthenosphere, and the lithosphere that are near the surface are thinner. About this, it can be concluded the lithosphere is thinner than the asthenosphere because the lithosphere has a thickness of 100 km, while the asthenosphere thickness is 660km. This makes option D the correct.

Answer:

In this case, the horizontal velocity of the rocket starts from the acceleration, so if its velocity drops to zero,

Explanation:

When a satellite is in orbit the most important force is the docking of gravity with the Earth

             F = m a

where the acceleration is centripetal and F is the force of universal attraction

centripetal acceleration is

             a = v² / r

             F = m v² / r

In this case, the horizontal velocity of the rocket starts from the acceleration, so if its velocity drops to zero, the force also drops to serious and the satellite steels to Earth.

The speed of the satellite is provides the speed, by local for smaller speeds in satellite, it descends in its orbits and when the speed is amate you have the energy to stop an orb to go to a higher orbit.

Answer:

i took g = 9.8m/s

A. 1.16secs

B. 2.32secs

C. 6.57m

D. 57.91m

Explanation:

A. How long does the Missile take to reach ot peak?

Time taken (t) =( U²Sin (angle) )/g

u = initial velocity = 25m/s

angle given = 30°

g = acceleration due to gravity = 9.8m/s²

t = U² x Sin (angle) / g

t = 25² x Sin(30)/9.8

t = 1.61secs

B. How long is the missile in the air in total?

T = 2t

T = 2 x 1.61 = 2.32 secs

C. what maximum Height does the missile reach?

D. How far does the missile travel Horizontally?

Answer:

1.01 W/m

Explanation:

diameter of the pipe d = 30 mm = 0.03 m

radius of the pipe r = d/2 = 0.015 m

external air temperature Ta = 20 °C

temperature of pipe wall Tw = 150 °C

convection coefficient at outer tube surface h = 11 W/m^2-K

From the above, we assumed that the pipe wall and the oil are in thermal equilibrium.

area of the pipe per unit length A = [tex]\pi r ^{2}[/tex] = [tex]7.069*10^{-4}[/tex] m^2/m

convectional heat loss Q = Ah(Tw - Ta)

Q = 7.069 x 10^-4 x 11 x (150 - 20)

Q = 7.069 x 10^-4 x 11 x 130 = 1.01 W/m

The heat loss per unit length of tube should be considered as the 1.01 W/m.

Since

diameter of the pipe d = 30 mm = 0.03 m

radius of the pipe r = d/2 = 0.015 m

external air temperature Ta = 20 °C

temperature of pipe wall Tw = 150 °C

convection coefficient at outer tube surface h = 11 W/m^2-K

Now

area of the pipe per unit length A should be

= πr^2

 = 7.069*10^-4 m^2/m

Now

convectional heat loss Q = Ah(Tw - Ta)

Q = 7.069 x 10^-4 x 11 x (150 - 20)

Q = 7.069 x 10^-4 x 11 x 130

= 1.01 W/m

hence, The heat loss per unit length of tube should be considered as the 1.01 W/m.

Learn more about heat here: https://brainly.com/question/15170783

Answer:

Joule

Explanation:

As any unit of energy (kinetic, potential, etc.), the gravitational potential energy has SI units of Joule. This s the work done by a force of 1 Newton to displace an object 1 meter in the direction of application of the force.

A material that does not conduct electricity is known as an insulator

A material which conducts electricity is called conductor whereas, the materials that does not conduct electricity is called insulators.

There are three types of materials based on the conductivity of them namely conductors, semiconductors and insulators. Conductors are those which conduct thermally and electrically. Materials such as metals are good conductors.

Semiconductors are materials which does not conduct at room temperature but partially conducts at higher temperatures or through doping with other materials. For example silicon, germanium etc.

Materials that does not conduct electricity at all conduct electricity is called insulators. Electrons are unable delocalize through these materials and cannot be made conductive at normal conditions. eg: wood, plastic etc.

To find more on insulators, refer here:

https://brainly.com/question/14363642

#SPJ6

Answer:

  D. 3.0 × 10^-6 m

Explanation:

Wavelength is found by dividing the speed of light by the frequency:

  λ = c/f = (3·10^8 m/s)/(1.0·10^14 Hz) = 3.0·10^-6 m