Answer:
1.A POWER DRILL COULD SET YOUR HOUSE ON FIRE, IN THEORY.
2.STICKY NOTES COME OFF EASILY BECAUSE THEIR ADHESIVE IS UNEVEN. ...
3.GUM IS CHEWY BECAUSE IT'S MADE OF RUBBER. ...
4.OFFICE BUILDINGS ARE EVER-SO-SLIGHTLY TALLER AT NIGHT. ...
5.A LEGO BRICK CAN SUPPORT 770 POUNDS OF FORCE. ...
6.POLISHING SHOES IS LIKE FILLING IN A ROAD'S POTHOLES.
Explanation:
what is the name of the compound represented by the formula SI2BR6
Answer:
Disilicon Hexabromide
Explanation:
A compound H2O is named – Dihydrogen monoxide. Its common name is of course water. A compound of Si2Br6 is named – Disilicon Hexabromide. 2.
What product(s) are formed during this chemical reaction? (There will be two correct answers)
Ca + Na3PO3 rightwards arrow
CaNaPO3
Ca3(PO4)2
Ca2(PO4)3
Ca(PO3)2
Na
Na3
CaNa
No Reaction
Answer:
Ca3(PO4)2 and Na
Explanation:
The reaction equation is;
3Ca + 2Na3PO3 -------> Ca3(PO3)2 + 6Na
We must remember that calcium is above sodium in the electrochemical series. This implies that calcium can displace sodium from its solution. Calcium has a reduction potential of -2.87 V while sodium has a reduction potential of -2.71 V. The ion with the more negative reduction potential can easily displace the other in aqueous solution.
This explains why the reaction above is possible.
Can someone help? Ill give brainliest!
Directions: count each side of the reaction then Circle yes or no if it follows the law of conservation of mass
Answer:
Explanation:
before the reaction you have K=2 and Cl=4
after the reaction K=2 and Cl=2 so it does not follow the law of conservation
When 2.5 moles of N2 react according to the reaction below, how many moles of NH3 will be produced?
N2 + 3 H2 --> 2 NH3
O 2.5 moles NH3
0 2.0 moles NH3
O 1.3 moles NH3
5.0 moles NH3
Answer:
5 mol
Explanation:
by stoichiometry
nN2/1=nNH3/2
2.5=nNH3/2
nNH3=2.5×2
nNH3= 5 mol
Answer: I got 5.0 moles
Explanation:
1. Find the number of protons, neutrons, electrons and electronic structure of flourine 919F.
2. Write the chemical formula of following compound.
Magnesium hydroxide
3. Balance the following equation
_H2 + _O2 --------> __H2O
1. ₉¹⁹F
2. Mg(OH)₂
3. 2H₂ + O₂ ⇒ 2H₂O
Further explanation1. Fluorine, atomic number : 9 , mass number = 19
Symbol : ₉¹⁹F
protons=electrons=atomic number = 9
neutrons = mass number - atomic mass
[tex]\tt n=19-9=10[/tex]
Configuration : [He] 2s² 2p⁵
2. Magnesium hydroxide is an ionic compound and is a strong base consisting of 2 ions:
Positive ion: Magnesium: Mg²⁺
negative ion: Hydroxide: OH⁻
The charges of the two are crossed, so that the compound becomes:
Mg(OH)₂
3. Reaction :
H₂ + O₂ --------> H₂O
give coefficient :
aH₂ + bO₂ --------> H₂O
H, left = 2a, right 2⇒2a=2⇒a=1
O, left = 2b, right 1⇒2b=1⇒b=0.5
Reaction becomes :
H₂ + 0.5O₂ --------> H₂O x 2
2H₂ + O₂ --------> 2H₂O
Which best explains why aluminum is a nonrenewable resource?
A)It cannot be quickly replaced.
B)It is expensive to process.
C)It conducts electricity.
D)It is useful to humans.
Answer:
A.) It cannot be quickly replaced.
Explanation:
Aluminum is extremely useful to humans but is semi-difficult to produce. Because of this, your answer will be numero uno. (Or A.)
An independent variable is....
A: What we measure
B: What we change
C: What stays the same
D: What we conclude
Answer:
B - What we change
Explanation:
Dependent Variable - What we measure
Control Variable - what stays the same
Conclusion - what we conclude
Hope this can Help!
:D
A sample of CO2 weighing 86.34g contains how many molecules?
Answer:
1.181 × 10²⁴ molecules CO₂
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
86.34 g CO₂
Step 2: Identify Conversion
Avogadro's Number
Molar Mass of C - 12.01 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of CO₂ - 12.01 + 2(16.00) = 44.01 g/mol
Step 3: Convert
[tex]86.34 \ g \ CO_2(\frac{1 \ mol \ CO_2}{44.01 \ g \ CO_2} )(\frac{6.022 \cdot 10^{23} \ molecules \ CO_2}{1 \ mol \ CO_2} )[/tex] = 1.18141 × 10²⁴ molecules CO₂
Step 4: Check
We are given 4 sig figs. Follow sig fig rules and round.
1.18141 × 10²⁴ molecules CO₂ ≈ 1.181 × 10²⁴ molecules CO₂
01:44:12
Considering the temperature vs. time graph below, how does the temperature at the beginning of a change of state
compare with the temperature at the end of the change?
Temperature vs. Time
140
4
100
80
Temperature (°C)
3
30
40
20
2
0
20
Time (min)
The temperature is always lower
The temperature is always the same
The temperature is usually lower
The temperature is usually higher
Which of the following most likely happens when thermal energy is removed from a chemical reaction?
Answer:
fewer collisions occur between particles or lowering the temperature
Explanation:
Which states of matter can form solutions?
A. Gas-liquid
B. Solid-solid
C. Solid-liquid
D. All of the above
Answer:
c
Explanation:
spongebob cheese pants
Answer:
I believe D
Explanation:
im not super sure but I'm pretttyyy sure
When 0.25 moles of NH3 are produced according to the reaction below, how many moles of H2 must have reacted?
N2 + 3 H2 --> 2 NH3
O 1.5 moles H2
O 0.38 moles H2
O 0.25 moles H2
O 0.17 moles H2
Answer:
Explanation:
by stoichiometry
nNH3/2=nH2/3
0.25/2=nH2/3
nH2=0.25×3/2
nH2=0.375 mol
so its 0.38 mol
Answer:
I have this quiz rn I will try 0.38 if it is right I’ll edit this and say that
Explanation:
How many grams of glucose are in 4.5x1023 molecules of glucose?:
Answer:
[tex].5865 \\ \\ \\ \\ \\ \5865[/tex]
[tex] \\ \\ 5865 \inf \inft \cos( \\ \) [/tex]
Hannah added a silvery white metal to a beaker of cold water and noticed that
gas bubbles were given off and a different substance formed. When she
repeated the activity with hot water she noticed the gas bubbles were released
much more rapidly. Which statement best explains why the reaction occurred
faster in hot water?
A ) Hot water increases the collision rate of the molecules, causing the
reaction to occur faster.
B ) Hot water changes the concentration of the chemicals, causing the
reaction to occur faster.
C ) Hot water increases the surface area of the molecules, causing the reaction
to occur faster.
D ) Hot water changes the chemical composition of the water molecules,
causing the reaction to occur faster.
Answer:
A. Hot water increases the collision rate of the molecules, causing the
reaction to occur faster.
Explanation:
Hot water molecules move faster than cold water molecules.
explain why the reaction between lead (II) nitrate and concentrated sulphuric (VI) acid starts and stops immediately?
Answer:
The reaction produces insoluble lead (II) sulphate which coats the surface of lead (II) nitrate [Pb(NO3)]
Help me with homework.
The chemical equation is said to be balanced if the number of atoms in the reactants and products is the same
Further explanationEquation balanced ⇒ total number of atoms in reactants(on the left)= total number of atoms in products(on the right)
H₂+O₂---> H₂O
Reactants : H₂, O₂
Products : H₂O
not balanced
H₂O₂ ---> H₂O+O₂
Reactants : H₂O₂
Products : H₂O, O₂
not balanced
Na+O₂ ---> Na₂O
Reactants : Na, O₂
Products : Na₂O
not balanced
N₂+H₂ ---> NH₃
Reactants : N₂, H₂
Products : NH₃
not balanced
P₄+O₂---> P₄O₁₀
Reactants : P₄, O₂
Products : P₄O₁₀
not balanced
Fe+H₂O ----> Fe₃O₄ + H₂
Reactants : Fe, H₂O
Products : Fe₃O₄
not balanced
K20
Molar Mass (g/mole)
2(39.10) + 16.00 = 94.20 g/mole
Moles
5.85 moles
Mass (grams)
Particles
Answer:
yes
Explanation:
that is the answer
Select ALL of the following statements that are incorrect.
Solids, liquids, and gases are all able to act as solutes in a solution.
Solids, liquids, and gases are all able to act as solvents in a solution.
Solids are not able to act as a solvent if a gas is the solute.
Gases are not able to act as a solvent if a solid is the solute.
Answer:the 4th one is incorrect,and the 1st one is incorrect hope this helps.
Adsorption is defined as a process in which gas molecules tend to adsorb on the surface of a solid solvent.
Therefore, the statement solids are not able to act as a solvent if a gas is the solute, is false.
On the other hand, gases can also act as a solvent if a solid is the solute.
Explanation:
Adsorption is defined as a process in which gas molecules tend to adsorb on the surface of a solid solvent.
Therefore, the statement solids are not able to act as a solvent if a gas is the solute, is false.
On the other hand, gases can also act as a solvent if a solid is the solute.For example, air present in the surrounding acts as a solvent and solid substances present in the surrounding acts as a solute.
Hence, the statement gases are not able to act as a solvent if a solid is the solute, is false.
Thus, we can conclude that following are the statements which are incorrect.
Solids are not able to act as a solvent if a gas is the solute.
Gases are not able to act as a solvent if a solid is the solute.
What is the term
chemistry
Answer:
Chemistry is the scientific study of the structure of substances, how they react when combined and how they behave under different situations.
Answer:
The branch of science that deals with the identification of the substances of which matter is composed; the investigation of their properties and the ways in which they interact, combine, and change; and the use of these processes to form new substances.
Explanation:
Hope this helps!!!!!!
:)
In lab you reacted 60 grams of propane (C3H8) with 13 grams of oxygen gas (O2). Your
reaction made 63 grams of water (H2O). The reaction is shown below:
How much carbon dioxide (CO2) is released into the air?
C3H8 + 5O2 ------> 3CO2 + 4H2O
10 g
73 g
120 g
1368
Answer:
120g
Explanation:
Based on the reaction, when 1 mole of propane and 5 moles of oxygen react, 3 moles of CO2 and 4 moles of H2O are produced. The ratio of production is 3 moles of CO2 per 4 moles of H2O.
Thus, we need to convert mass of water to moles using its molar mass:
Moles H2O (Molar mass: 18g/mol):
63g H2O * (1mol / 18g) = 3.5 moles H2O
Converting to moles of CO2:
3.5 moles H2O * (3 moles CO2 / 4 moles H2O) = 2.625 moles CO2
Mass CO2 (Molar mass: 44g/mol):
2.625 moles CO2 * (44g / mol) = 115.5g of CO2 are released
120gWhich of these products was made using a renewable resource?
O A. Paper plate
O B. Aluminum can
O C. Copper pan
O D. Plastic bag
Answer:
paper plate
Explanation:
A renuable source is a source that would replenish in ones lifetime. Trees make paper and grow in the span of a average human life.
Help please! A gas occupies 500 mL at 270 mm Hg and 55°C. If the pressure is changed to 1.8 atm and the temperature is
increased to 100°C, what is the new volume? Be sure to show the setup and the final answer and unit.
Show Your Work
Answer:
V₂ = 112.14 mL
Explanation:
Given data:
Initial volume = 500 mL
Initial pressure = 270 mmHg (270/760 =0.355 atm)
Initial temperature = 55 °C (55 +273 = 328 K)
Final temperature = 100°C (100+273 = 373 K)
Final volume = ?
Final pressure = 1.8 atm
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
Solution:
V₂ = P₁V₁ T₂/ T₁ P₂
V₂ = 0.355 atm × 500mL × 373 K / 328 K × 1.8 atm
V₂ = 66207.5 atm .mL. K / 590.4 K.atm
V₂ = 112.14 mL
Which of the following is an indication of a physical change?
O A. The formation of a new substance
O B. Giving off a smell
O C. A change in the shape of a substance
O D. The production of gas and heat
Answer:
A change in the shape of a substance
Explanation:
Because when ths shape of a sunstance changes , its physical appearance changes .A physical change is a change to the physical—as opposed to chemical—properties of a substance. They are usually reversible. The physical properties of a substance include such characteristics as shape (volume and size), color, texture, flexibility, density, and mass.
Construct the chemical formulas for the ionic compounds.
Ionic compounds are formed from metal and non-metal elements
Further explanationThe chemical formula of compounds (especially ionic compounds) can be determined from the charge of each ion.
Determination of the ionic charge of the constituent elements of the compound can be seen from the electron configuration to achieve stability according to the octet rule
The charge of each ion will be crossed in the compound
Aluminum bromide
Al³⁺ + Br⁻ ⇒ AlBr₃
Magnesium bromide
Mg²⁺ + Br⁻ ⇒ MgBr₂
Sodium sulfide
Na⁺ + S²⁻ ⇒ Na₂S
Sodium nitride
Na⁺ + N³⁻ ⇒ Na₃N
How many moles of Cl2 are needed in order to produce 100.0 grams of FeCl3 given the following
equation: 2 Fe + 3 Cl2 → 2 FeCl3
B
T
Answer:
0.92moles
Explanation:
Given reaction:
2Fe + 3Cl₂ → 2FeCl₃
Mass of FeCl₃ = 100g
Unknown:
Number of moles of Cl₂ needed = ?
Solution:
To solve this problem, we work from the known specie to the unknown.
From the mass of the FeCl₃ given, we can solve for the number of moles of the unknown.
Number of moles of FeCl₃;Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of FeCl₃ = 56 + 3(35.5) = 162.5g/mol
Number of moles = [tex]\frac{100}{162.5}[/tex] = 0.62mole
From the reaction expression;
2 mole of FeCl₃ is produced from 3 moles of Cl₂
0.62 mole of FeCl₃ will be produced from [tex]\frac{0.62 x 3}{2}[/tex] = 0.92mole
The number of moles of Cl₂ = 0.92moles
Air that has been removed from a bell jar will NOT allow _____________ waves to travel through the jar. Question 4 options: sound light water
Answer:
Sound.
Explanation:
Sound requires a medium such as air to travel.
P and Q are two substances such that the melting point of P and the boiling point of Q are the same. If P is a solid at a certain temperature, what state will Q be in at the same temperature?
Answer:
Explanation:
Firstly, it should be noted that melting and freezing points are the same. Thus, when a substance melts at a certain temperature, it means it can also start freezing/solidifying at that same temperature. That been said, when the substance P is a solid at a certain temperature, the other compound Q will boil at that same temperature and hence will be a gas at that same temperature.
If P is solid, it simply means that Q must still be in the liquid state.
From the question, we can see that, the melting point of P and the boiling point of Q are the same. The melting point of a substance is the temperature at which the solid turns to liquid while the boiling point of a substance is the temperature at which a liquid turns to a gas.
If P is solid, it simply means that Q must still be in the liquid state. It has not yet started boiling since the melting point of P and the boiling point of Q are the same.
Learn more: https://brainly.com/question/8553652
someone help me please i’ll give brainly
Answer:
b
Explanation:
i looked it up on Google
State the career function of mechanical engineering
Answer:
Mechanical engineers design power producing machines, like electric generators, internal combustion engines, and steam and gas turbines, also power using machines, such as refrigeration and air-conditioning systems. Mechanical engineers design other machines inside buildings, such as elevators and escalators.
Explanation:
At the Beltway Outlet store, you buy x computer games for 13$ each and a magazine for 4$. Write an expression in simplest form that represents the total amount of money you spend. Someone please help
Answer:
y = 13x + 4
Explanation:
Given parameters:
number of computer games bought = x
cost of each games = $13
number of a magazine = 1
cost of magazine = $4
Unknown:
Total amount of money spent = ?
Solution:
The total amount spent;
let total amount = y
y = total cost of magazine + total cost of computer games
total cost of magazine =$4
total cost of computer games = 13x
y = 13x + 4