How do robots demonstrate the modern, technological Japan? *
Robots demonstrate modern, technological Japan because it serves as brought economical success to Japan since it help them to build products faster and efficiently.
According to the question, we are to discuss how the robot help japan in terms of technology and modernization.As a result of this we can see that Japan is moving forward in technology with development of robot because it makes them to build more products.
Therefore, Robot has brought economical success to Japan
Learn more about robot at:
https://brainly.com/question/10387419
What best describes the relationship between missionaries and Native Americans?
Answer:
Missionaries taught the Native Americans to read but allowed them to keep their customs. Native Americans and missionaries fought in battles
Explanation:
sorry if this doesn't help u but i hope it does!
All of the following are examples of capital intensive industries EXCEPT: *
1 point
Soft drink production
oil extraction
manufacturing
hospitality
Answer:
hospital
Explanation:
Soft drink production is a capital intensive industry as it's depends upon the economy and trade.Oil extraction is a national industry and it also involves the intention of trade.Manufacturing is similar to soft drink production and has intense of trade.Hospital doesn't has the intention of trade so it's the answer1. Write an equation that shows the equivalency between meters and Gigameters.
John has an exhaust leak in his Acura Integra GS-R, What steps would he take to fix the leak in time for his inspection?
Answer:
Explanation:
Fist you need to identify where the leak is coming from. You can do this by either listening for the leak or spraying soapy water on the exhaust to look for air bubbles coming out of the exhaust. Depending on the spot of the leak there are many ways you can fix this leak.
1. Exhaust clamp
2. Exhaust putty
3. Exhaust tape
4. New exhaust
Exhaust clamp is best used for holes on straight pipes.
Putty is best used on welds or small holes like on exhaust manifolds or welds connecting various pieces like catalytic converters, mufflers, or resonators.
Tape will work best on straight pipes with holes.
New exhaust is for when the thig is beyond repair, like rust.
Now good luck because working on exhausts is a pain.
in what flight condition is torque effect the greatest in a single-engine airplane?
Answer:
Low airspeed, high power, high angle of attack
Write a system of equations to describe the situation below, solve using any method, and fill in the blanks.
Nicole and Josie are both selling cookie dough for a fundraiser. Although Nicole has already sold 4 tubs, Josie hasn't sold any yet. If Nicole starts selling 5 tubs per day and Josie begins selling 6 tubs per day, they will eventually sell the same amount of cookie dough. How many tubs will each sell? How many days will that take?
Nicole and Josie will each sell
tubs of cookie dough in
days.
The number of tubs that each of them sold is; 24 tubs each
The number of days it will take for both of them to sell same amount of tubs is; 4 days
Number of cookies that Nicole had already sold = 4 tubs
Number of cookies sold by Josie before counting = 0 cookies
Nicole now sells 5 tubs per day and
Josie now sells 6 tubs per day.
Let the number of days it will take for them to have sold the same amount of cookies be d.
Thus;
5d + 4 = 6d + 0
6d - 5d = 4
d = 4 days
Thus, total number of cookies for both are;
Total for Nicole = 4 + 5(4) = 24 cookies
Total for Josie = 6(4) = 24 cookies
Read more about proportion at; https://brainly.com/question/870035
what are the potential problems with the ag gag laws
Answer:
Ag-gag laws pose a threat to a wide spectrum of values and issues Americans care about. Social issues potentially negatively impacted by ag-gag laws include, but are not limited to: Animal Welfare. Food Safety.
Explanation:
2) What kinds of food can you eat in space?
Answer:
fruits, nuts, peanut butter, chicken, beef, seafood, candy, brownies now if we talking about drinks ,coffee, tea, orange juice, fruit punches and lemonade
Explanation:somehow this all are delicious
¿Qué es una restricción FACTIBLE?
El tema es sobre Programación Lineal.
Por favor no se roben los puntos, necesito una respuesta.
NO WIKIPEDIA.
Answer: A feasible solution for a linear program is a solution that satisfies all the constraints of the linear programming problem. There could be many solutions that satisfy all the restrictions. Any point in the feasible region is a feasible solution for the LPP. A feasible solution for a linear program is a solution that satisfies all the constraints.
Explanation: Hope this helps: ^
A technician notes that an operating air-conditioning system has ice formed on the suction line at the condensing unit. The technician can reasonably assume that:
The technician can reasonably assume that evaporator coil is frozen over.
An air-conditioning system makes a place cooler by absorbing heat from the
surrounding. This is usually done with the aid of the evaporator coil.
In situations whereby there are ice particles formed on the suction line at the
condensing unit then it means the air conditioning system is faulty and must
be turned off to prevent damage to other parts.
Read more about Air conditioning system here https://brainly.com/question/24920322
what element is the primary constituent of ferrous alloys?
What is the voltage across the load, RL, in
this voltage divider network?
10.25 V
4.55 V
5.71 V
11.50 V
Answer:
(c) 5.71 V
Explanation:
The circuit can be redrawn to a Thevenin equivalent that is 6V through a 5-ohm resistor into a 100-ohm load. Then the voltage at the load is ...
(6 V)(100/(100 +5) ≈ 5.71 V
Please help for our stem project :(
Explain how Ratio and proportion affect the strength of the Bridge.
STEM Project
Answer:
Do you have some a picture
Oil refining is an example of:
Construction Production
Extractive Production
Domestic Production
Traditional Production
Extractive industry, can be defined as a processes that involve different activities that lead to the extraction of raw materials from the earth (such as oil, metals, mineral and aggregates), processing and utilization by consumers.
how to calculate modulus of rigidity from stress strain curve
Answer:
Explanation:
The modulus of rigidity formula is G=E/(2(1+v)), and modulus of rigidity is denoted by G, elastic modulus is denoted by E and poisson's ratio is v in the formula.
the basic purpose of adjusting the fuel/air mixture at altitude is to
Answer:
The basic purpose of adjusting the fuel/air mixture at altitude is to. ... increase the amount of fuel in the mixture to compensate for the decrease in pressure and density of the air
if a population has no predadors and plenty of available resources, how might that population change
Answer:
B (exponential growth )
Explanation: wish u the best bby <33
(b) The application of user centred design can lead to innovative products such as the umbrella shown in Figure 9.
Explain the concept of user centred design and how it may have influenced the design of the umbrella shown in Figure 9. (6 marks)
Answer:
the concept of user centred design is the idea of putting your clients best needs in mind. you need to be empathic and understanding of how to make their life easier. by doing research you can do this. for example the design in figure 9 shows an umbrella with a canopy. the canopy can deflect rain and still have the easy design of an umbrella. this makes it not only easier to use but functional.
Explanation:
i wrote this myself so copy it or just rewrite it, it doesnt matter
Help!!
So I think that someone is tracking my truck with an apple airtag but I don't know for sure. The only apple product I have is an iPad and I don't know how to check if an airtag is near by!!
Explanation:
I mean honestly it depends like how old is it? is it one of the newer generations because a majority of apple products have airtags but their is also the lost my iPhone app so they can track where ever their iPad or iPhone is.
Connect wires to make the correct logic outputs.
Outputs needed: ~(B&C), A.
(Assignment: NAND Gates.
School Program: Acellus.
Class: Electronics & Coding.)
Answer:
Explanation:
im dum sorry bro i don't know it im in 6 grade
what happens when you pass a current through an insulated wire?
True of false an understaffed store can cause loss of inventory
Answer:
probably true, if it's understaffed people are more likely to steal and the overworked workers that still remain are likely to make more mistakes
True.
It's important to keep a balance of store labor with incoming consumer traffic. Understaffing affects the impact of profitability.
MANUFACTURING QUESTION PLEASE HELP
Answer:
"He then pours the metal into a mold and allows it to solidify."
Select the correct answer. which process involves creating a product by heating metals and changing their shape through the application of mechanical force?
A. finishing
B. forming
C. assembling
D. casting
would it be forming? or casting? I'm so lost
Answer:
I would say that it is forming.
Explanation:
Give brainliest if u can. :S
why is a plastic or metal restrictor placed in either the end of the vent pipe or in the vapor-vent hose on some vehicles?
Answer:
To help the vehicle better function
Explanation:
The plastic or Metal material there is to block certain things that shift our of place and can get caught up in the vent, the materials prevent thing from entering in and out of the vent bc if anything should go in the vent it can cause severe vehicle problems
Hope this help❤
How much current is drawn by a flashlight that has a resistance of 10 ohms if a voltage of 3 volts is impressed across it?
Answer:
0.3 amps
Explanation:
amps can be found using the equation
current=volts/resistance
so current=3V/10Ohms=0.3 amps
what is created that highlights how to use the system and how to troubleshoot issues or problems?
Answer:
In this phase, the detailed user documentation is created that highlights how to use the system and how to troubleshoot issues or problems.
Explanation:
its all i got sorry but hope it helps a lil
Many amateur video games suffer from what kind of layout?
A. an overly neutral layout
B. an overly simplistic layout
C. an over-crowded layout
D. a boring layout
Answer:
D a boring layout I think but you welcome
true or false tensile forces are smaller in arch bridges
Answer:
True
Explanation:
The tensile forces are small in most arches and usually negligible.