at a given temperature, the vapor pressures of hexane and toluene are 183 mm hg and 59.2 mm hg, respectively. calculate the total vapor pressure over a solution of hexane and toluene. the mole fraction of hexane (x hexane) is 0.520.

Answers

Answer 1

Answer:

total of 131 millimeters of mercury

Explanation:

So we can calculate the total vapour pressure using the equation. The total pressure p equals x a where x is the mole fraction of a and the p a is the partial pressure of a plus x b being the mule fraction of b and the partial pressure of b we can get the mule fraction of a and B because 1 will equal x, a plus x b and a is hexane and b is octane, and so the mole fraction of hexane is 1.580, and so we can set this up to solve. As x b will equal 1 minus x a which is equal to 1 minus .58, which is equal to .4 2 point now, because we have all our numbers, we can put them into our full equation. So we have. The pressure is equal to .58 times. The pressure of our hexane, which is greater than 183, and this has added 2.42 and the pressure of our octane, which is 59.2, and so we get a total of 131 millimeters of mercury. As our total vapour pressure.

Answer 2

answer is in th epic

At A Given Temperature, The Vapor Pressures Of Hexane And Toluene Are 183 Mm Hg And 59.2 Mm Hg, Respectively.

Related Questions

write the chemical reaction that occurs between the two reacting species. include physical states. molecular equation: what volume of the solution is needed to completely react all 7.05 g of zinc powder? volume: l calculate the molarity of the zn2 ions in solution after the reaction. concentration: m

Answers

Zn(s) + Pb(NO3)2,(aq)⇄ Zn(NO3)2,(aq) + Pb(s) is the chemical reaction that occurs between the two reacting species. include physical states.

One or more chemicals (the reactants) transform into one or more new substances through a chemical reaction (the products). Chemical parts or chemical elements make up substances. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.

Chemical reactions are vital to life itself, as well as to technology and culture. The burning of fuels, the smelting of iron, the creation of glass and pottery, the brewing of beer and wine, and the making of cheese are a few instances of ancient processes that entailed chemical reactions. The Earth's geology, atmosphere, oceans, and a variety of intricate processes that take place in all living systems are rife with chemical reactions.

To know more about  chemical reactions visit : https://brainly.com/question/29039149

#SPJ4

Classify the carbohydrate tagatose by both the carbonyl group and the number of carbon atoms.

Answers

ketohexose is the carbohydrate tagatose by both the carbonyl group and the number of carbon atoms.

An atom is a particle to be counted that uniquely defines a chemical detail. An atom consists of a central nucleus which is surrounded with the aid of one or extra negatively charged electrons. The nucleus is definitely charged and incorporates one or greater especially heavy particles known as protons and neutrons.

The time period "atom" comes from the Greek phrase for indivisible as it was as soon the idea that atoms were the smallest matters within the universe and couldn't be divided.

An atom includes a critical nucleus that is surrounded by means of one or more negatively charged electrons. The nucleus is undoubtedly charged and incorporates one or greater extraordinarily heavy particles called protons and neutrons. Atoms are the simple building blocks of the count.

Learn more about atoms here:-https://brainly.com/question/6258301

#SPJ4

the combustion of octane, c8h18,c8h18, proceeds according to the reaction shown. 2c8h18(l) 25o2(g)⟶16co2(g) 18h2o(l) 2c8h18(l) 25o2(g)⟶16co2(g) 18h2o(l) if 442 mol442 mol of octane combusts, what volume of carbon dioxide is produced at 33.0 ∘c33.0 ∘c and 0.995 atm?

Answers

The volume of the carbon dioxide is 89323.67 L.

Given,

Moles of octane = 442 moles

The balanced chemical reaction is given as,

2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O

2 moles of octane on reaction produces 16 moles of carbon dioxide

1 mole of octane on reaction produces 16/2 moles of carbon dioxide

442 moles of octane on reaction produces 8 × 442 moles of carbon dioxide

Moles of carbon dioxide = 3536 moles

Given:  

Pressure = 0.995 atm

Temperature = 33.0 °C

The conversion of T( °C) to T(K) is shown as follows:

T(K) = T( °C) + 273.15  

So,  

T₁ = (33.0 + 273.15) K = 306.15 K  

Using ideal gas equation as:

PV = nRT

where,  

P is the pressure

V is the volume

n is the number of moles

T is the temperature  

R is Gas constant having value = 0.0821 L.atm/K.mol

Applying the equation as:

0.995 atm × V = 3536 mol × 0.0821 L.atm/K.mol × 306.15 K  

⇒V = 89323.67 L

Hence, the volume of the carbon dioxide is 89323.67 L.

Learn more combustion of the octane from the link given below.

https://brainly.com/question/3332575

#SPJ4

consider the lewis structure for pcl3 . the lewis structure for pcl3. the central p has a single bond to each cl atom and a lone pair. each cl atom has 6 valence electrons. what are the approximate bond angles?

Answers

Considering the lewis structure for PCl₃, PCl₃'s bond angle is 103°.

PCl₃'s bond angle is less than 109°. The chemical formula for phosphorus trichloride is PCl₃, and it is a rare substance.

This indicates that the phosphorus atom is located in the middle of a triangle formed by the three chlorine atoms.

Because the angles of the bonds between each pair of atoms are all 120 degrees, this molecule is known as "triple-chlorine."

Since chlorine needs an electron and phosphorus has a metallic nature and is an easy electron donor, their bond in PCl₃ is covalent. Additionally, it has trigonal bi pyramidal structure, as per VSEPR.

So,  the approximate bond angles between P and Cl is 103°.

To learn more about Lewis Structures, here :

https://brainly.com/question/27136266?referrer=searchResults

#SPJ4

What is the difference between poisonous and venomous?

Answers

Answer:

Explanation:

Poison is a toxin that gets into the body by inhaling, swallowing, or absorption through the skin. Venomous: it's when the toxin is injected into you.

why is the reduction of the nitro group completed in the second step of this sequence rather than the first?

Answers

The action of hydrazine on carboxylic acid involves the nitro group's electron-withdrawing properties.

Since carboxylic acid is a poor electrophile and the nitro group's ability to suck electrons increases it, hydrazine can easily attack it. Aniline is a base that can affect the hydrazine's reactivity if we reduce in the first stage. A fascinating chemical is luminol, which produces light as a byproduct of oxidation. It is a component of a forensic test for blood, as seen on the CSI television program.

1.The first procedure in the production of luminol involves the reaction of hydrazine with 3-nitrophthalic acid.

2. Triethylene glycol, a solvent with a high boiling point, is added to an aqueous solution of the hydrazine salt to facilitate this reaction. After boiling out the extra water, the temperature is increased to a point where the dehydration is complete within a short period of time. Using sodium dithionite, the nitro- group of the resultant product, nitrophthalhydrazide.

3.is then converted to an amine group to create luminol.

4.Due to compound 3's enolization, which makes it soluble in alkali, the reduction is carried.

Thus, reduction of the nitro group is completed in the second step of this sequence rather than the first.  

To learn more about luminol refer- https://brainly.com/question/5032032

#SPJ4

Your question is incomplete please find the complete question over the internet.

atmospheric stability and wind conditions control group of answer choices the vertical and horizontal dispersion of pollutants the quantity of pollution emitted into the atmosphere from industrial and mobile sources. the rate of photochemical reactions taking place. the increased use of fuel for heating or cooling

Answers

The correct answer is

atmospheric stability and wind conditions control the vertical and horizontal dispersion of pollutants.

What is meant by atmospheric stability?

Atmospheric stability is a measure of atmospheric status which determines whether or not air will rise, sink, or be neutral. In general, stability refers to air tendency to rise or to resist vertical motion.

Three Types of Stability

1. An unstable atmosphere will enhance or encourage the vertical movement of air.

2. A stable atmosphere will suppress or resist vertical motion.

3. A neutral atmosphere will neither suppress nor enhance vertical motion.

Learn more about atmospheric stability here :

https://brainly.com/question/4553502?referrer=searchResults

#SPJ4

methane, ch4(g), reacts with steam to give synthesis gas, a mixture of carbon monoxide and hydrogen, which is used as starting material for the synthesis of a number of organic and inorganic compounds. ch4(g) h2o(g) → co(g) h2(g) [unbalanced] what mass of hydrogen is formed if 275 l of methane (measured at stp) is converted to synthesis gas?

Answers

methane, ch4(g), reacts with steam to give synthesis gas, a mixture of carbon monoxide and hydrogen, which is used as starting material for the synthesis of a number of organic and inorganic compounds,1 mole of gas will take up 22.4 litres at STP.

Methane gas moles equal 275/22.4 = 12.27 moles.

Equation in balance: CH4 + H2O === CO + 3H2

Type of response: double replacement

Produced moles of H2 gas equal 12.27 x 3 = 36.81 moles. (Because three moles of H2 are produced from one equivalent of CH4)

Hydrogen mass is equal to 36.81 x 2.016, or 74.20 grammes.

Learn more about Methane gas here:

https://brainly.com/question/12645626

#SPJ4

suppose that 9.94 x 10^3 mol of hydrogen gas occupies a 1,317 ml container at 199°c. what is the pressure (in torr)?

Answers

The equation PV=nRT from the ideal gas law can be used to calculate the sample pressure. Use the conversion factor 1 atm = 760 torr to find the pressure in torr. You'll get 34,877 Torr as a result.

How to solve?

the ideal gas law equation is used to determine the pressure of the sample.

PV=nRT, where

P - the pressure of the hydrogen sample

V - the volume it occupies

n- the number of moles of gas;

R- the universal gas constant, usually given as  0.082atm⋅L/mol⋅K

T- the temperature of the gas - expressed in Kelvin

So, rearrange the ideal gas law equation to solve for

P, the pressure of the gas.

P=nRTV

Put in your values and find

P - do not forget that you need to use the volume in liters and the temperature in Kelvin

P=9.94 x 10^3 mol ⋅0.082atm⋅L/mol⋅K⋅(273.15−199)K/1.3L

P=3.4877  atm

To get the pressure in torr, you need to use the conversion factor

1 atm = 760 torr

This will get you

3.4877atm⋅760 torr/1atm=34,877torr

What distinguishes real gas from ideal gas?

Gases come in two varieties. Gases that are ideal and real. Given that an ideal gas has very small particles, nearly negligible mass, and no volume A point mass is also referred to as an ideal gas. Real gas molecules, despite being small particles with volume, occupy space.

The author of the ideal gas equation?

One equation, developed through the experimental work of many people, particularly Robert Boyle, Jacques A. C. Charles, and Joseph Gay-Lussac, relates the pressure, volume, temperature, and amount of an ideal gas.

Learn more about pressure here:

https://brainly.com/question/356585

#SPJ4

as a result of electron flow through complex iii, four protons (h ) are moved into the intermembrane space

Answers

The given statement is true.

One QH2 carrying two electrons, transfers one of the electrons to the 2Fe-2S clusters in the Riske proteins (I think? I'm not sure about this protein) which then transfers the one electron to the cytochrome c1 subunit of complex three which transfers a single electron to the mobile cytochrome c in the P side (intermembrane space)

The other electron carried by the QH2 is transferred to Heme bL and then Heme bH in the cytochrome b subunit which then transfers the electron to a Q making it a (dotQ-) a semiquinone radical. The original QH2 has been fully oxidized to Q at this point and released

Second QH2 docks and goes through the same process generating a second molecule of cytochrome c and fully reducing the semiquinone to the QH2.This means, in the overall process 2QH2 were oxidized to produce two cytochrome c but two of the electrons were used to generate 1QH2 so there was only a net of one QH2 to make those two cytochrome c

For each QH2 oxidized, the 2H+ carried by the coenzyme Q were transferred to the intermembrane space, so the Q cycle allows for four H+ to be transferred per net QH2 consumed rather than 2

How much H+ is pumped into the intermembrane space?

As the electrons pass from NADH to ubiquinone, energy is released and utilized by the complex to pump 4 H+ ions into the intermembrane space.

Therefore the given statement is true.

To know more about Electron flow through complex iii:

https://brainly.com/question/29377605

#SPJ4

calculate the height of a column of ethylene glycol that would be supported by atmospheric pressure (760 mmhg). the density of ethylene glycol is 1.2 g/ml

Answers

The height of column of ethylene glycol supported by atmospheric pressure is 63.33m.

Given -

P= 760 mm Hg

p=1.2g/ml

Principle-

Any liquid can be used with this equation, not just mercury.The liquid's surface is being pressed against by atmospheric pressure. The liquid's weight is determined by the column's height and density; gravity then adds to this weight and pulls the liquid down. As a result, the downward forces on the opposing side balance the upward forces on the one side.The height of the water column supported by atmospheric pressure, which is approximately 10 meters, can be calculated by substituting the values for water.

Calculations-

[tex]Pressure =hpg[/tex]Rearranging this equation [tex]h=\frac{Pressure}{pg}[/tex]

h=760/1.2 x 10

h=760/12

=63.33 m

To learn more about atmospheric pressure -

https://brainly.com/question/13407492

#SPJ4

what generalization can you make about a single compound's rf value when tested in a series of solvents with increasing polarity

Answers

As the RF (resonance frequency) increases, the polarity of the molecule increases as well.

Polarity is a measure of the separation of charges in a molecule. The higher the polarity, the greater the separation of charges.  This is because the higher the frequency, the more energy is transferred to the molecule, which increases the charge separation and therefore the polarity.

As the RF (resonance frequency) increases, the polarity of the molecule increases as well. This is because the higher the frequency, the more energy is transferred to the molecule, which increases the charge separation and therefore the polarity.

The increase in polarity is due to the increased energy being transferred to the molecule as the frequency increases. As the energy is absorbed, the electrons in the molecule are pulled further apart, increasing the separation of the positive and negative charges and thus increasing the polarity of the molecule. This increased polarity can be seen in the increased strength of intermolecular forces, leading to an increase in the boiling and melting points of the molecule.

To know more about polarity, click below:

https://brainly.com/question/545359

#SPJ4

Based on relative bond strengths , classify these reactions as endothermic (energy absorbed) or exothermic (energy released ).
Endothermic ;
Exothermic;
Strongest Bond A-B A-A B-B C-C B-C A-C Weakest Bond A2+C2 -> 2AC B2 +C2 -> 2BC A+BC -> AB+C A2+B2 -> 2AB AB+C -> AC+B

Answers

1. Endothermic

2. Exothermic

3. Endothermic

4. Endothermic

5. Exothermic

A reaction that emits heat and has a net negative standard enthalpy change is said to be exothermic. Any combustion procedure, iron rusting, and water freezing are a few examples. Exothermic reactions are those in which heat-based energy is released into the surrounding environment. If heat is absorbed by the system from the environment, the reaction or physical change is endothermic. As a result of the system absorbing heat from its surroundings during an endothermic process, the environment cools.

Learn more about exothermic here:

https://brainly.com/question/4345448

#SPJ4

If the bond angle between two adjacent hybrid orbitals is 120°, which is the hybridization?.

Answers

Three sp₂ hybrid spins that are aligned at a 120-degree angle to one another are produced when a s orbital is hybridized with p+ orbitals (p x and p y). Trigonal geometry is produced by Sp₂ hybridization.

How do you define hybridization?

Atomic orbitals with the same energy are blended together in a procedure called hybridization is order to obtain the same quantity of a novel type of hybrid orbitals. This mix typically results in hybrid atomic nuclei with entirely different energies, topologies, etc.

What is sp2 hybridization?

One s orbital and two p orbitals combine to generate three sp2 orbitals, each of which has 33% s character and 67% p character. This process is known as sp2 hybridization. Anytime an atom is surround by 3 groups of electrons, this kind of hybridization is necessary.

To know more about Hybridization visit:

https://brainly.com/question/14140731

#SPJ4

When the temperature of a 3. 0-l sample of a gas is dropped from 200°c to 100°c, what will be the final volume of the gas sample?.

Answers

The new volume will be, 6.0 L

[tex]P \propto \frac{1}{V}[/tex]

or,

[tex]P_1 V_1=P_2 V_2[/tex]

where,

[tex]P_1[/tex] = initial pressure = P

[tex]P_2[/tex] = final pressure = 2P

[tex]V_1[/tex] = initial volume = 3.0 L

[tex]V_2[/tex] = final volume = ?

Now put all the given values in the above equation, we get:

[tex]200P \times 3.0 L=100 P \times V_2[/tex]

[tex]V_2=6.0 \mathrm{~L}[/tex]

Thus, the new volume will be, 6 L

What is volume?

Volume is a basic physical amount. Volume is a derived amount and it expresses the three dimensional extent of an item. Volume is usually quantified numerically denote the SI derived unit, the cubic meter.

The new volume will be, 6.0 L

[tex]P \propto \frac{1}{V}[/tex]

or,

[tex]P_1 V_1=P_2 V_2[/tex]

where,

[tex]P_1[/tex] = initial pressure = P

[tex]P_2[/tex] = final pressure = 2P

[tex]V_1[/tex] = initial volume = 3.0 L

[tex]V_2[/tex] = final volume = ?

Now put all the given values in the above equation, we get:

[tex]200P \times 3.0 L=100 P \times V_2[/tex]

[tex]V_2=6.0 \mathrm{~L}[/tex]

Thus, the new volume will be, 6 L

To know more about volume, visit:-

https://brainly.com/question/12428413

#SPJ4

_________produces pyruvate. The multienzyme complex Glycolisis
Gluconeogenesis
Glycogenesis
______catalyzes the oxidative pyruvate kinase glyceraldehyde 3-phosphate dehydrogenase acetyl CoA carboxylase pyruvate dehydrogenase
______ of pyruvate to yield carbon dioxide and acetyl CoA. decarboxylation phosphorylation dehydrogenation
The overall equation for the reaction is
pyruvate + CoA + NADH + H+ acetyl CoA + NAD + + CO2 pyruvate + CoA + NAD+ + acetyl CoA + NADH + H+ +CO, pyruvate + COA + NAD+ - acetyl CoA + NADH + H+ pyruvate + COA+NAD acetyl COA+NADH+CO, +e pyruvate + CoA + NAD + CO, acetyl COA + NADH + H+
Acetyl CoA is the main form in which carbon compounds enter the_______
Cori cycle. citric acid cycle. electron-transport chain. Calvin cycle.

Answers

The answer is

1. Glycolysis produces pyruvate.

2. Pyruvate dehydrogenase catalyzes the oxidation of pyruvate kinase

3. Decarboxylation of pyruvate to yield carbon dioxide and acetyl CoA.

4. Acetyl CoA is the main form in which carbon compounds enter the

citric acid cycle.

What is Glycolysis?

Glycolysis is the process in which glucose is broken down to produce energy. It produces two molecules of pyruvate, ATP, NADH, and water. The process takes place in the cytoplasm of a cell and does not require oxygen. It occurs in both aerobic and anaerobic organisms.

Learn more about glycolysis here :

https://brainly.com/question/14076989?referrer=searchResults

#SPJ4

a solution was prepared by mixing 12.49 mg of d plus 10.00 ml of unknown containing just c, and diluting to 25.00 ml. peak areas of 5.97 and 6.38 cm2 were observed for c and d, respectively. find the concentration (mg/ml) of c in the unknown.

Answers

The concentration of A is 0.417 mg/ml.

Response factor (F) for compound "A" with response to "B" is

(Area) A / [A] = F x (Area) B / [B]

10.86 / 1.03 = F x 4.37 / 1.16

F = 2.799

Now, unknown solution has 12.49 mg of B

Final conc. of B = 12.49 mg / 25 ml = 0.4996 mg/ml

Let conc. of A = x mg / ml

Final conc. of A = 10ml / 25ml . x mg / ml

=0.4 c mg /ml

Now (Area) A = 5.97, (Area) B = 6.38

5.97 / 0.4 x = 2.799 . 6.38 / 0.4996

x = 0.417 mg/ml

Solution, in chemistry, a homogenous mixture of  or more materials in relative amounts that may be varied continuously up to what's referred to as the restrict of solubility. The term solution is typically implemented to the liquid nation of count number, but solutions of gases and solids are feasible.

Let us find out in this text. As a protracted as a liquid is made of a single substance, it remains pure and is known as a liquid. While something is added to it, it will become a solution.

Learn more about solution here:- https://brainly.com/question/25326161

#SPJ4

Lead will react with hydrochloride acid in a ingle replacement reaction. How many mile of hydrochloric acid are needed to completely react with 0. 36 mol of lead

Answers

In order for 0.36 mol of lead to totally react, 0.72 mol of Hydrochloric acid is required.

What is the purpose of hydrochloric acid?

In the food, textile, metal, or rubber sectors, hydrogen chloride (HCl) is frequently employed as a bleaching agent to neutralize alkaline substances. When discharged into the soil, it is neutralized, and when it comes into contact with water, it hydrolyzes quickly.Low concentrations exposed over an extended period of time may damage and stain teeth. The EPA has not rated the carcinogenicity of hydrochloric acid.

Does hydrochloric acid harm people?

Chemical burns from hydrochloric acid can be extremely painful if they come into contact with epidermis or other tissues. Ingestion of hydrochloric might result in blindness. The amount of acid present determines how severe the burns.

To know more about hydrochloric acid visit:

https://brainly.com/question/14006357

#SPJ4

household bleach is an aqueous solution that contains 5.0% sodium hypochlorite (naocl, 74.44 g/mol) by mass. calculate the molarity of the solution that results when you dilute 10.0 ml of bleach by the addition of 100.0 ml water. assume that the density of bleach is 1.00 g/ml.

Answers

The molarity of the solution that results when making dilution from 10.0 ml of bleach by the addition of 100.0 ml water is 0.061 M.

This problem is about stoichiometry. First, we have to calculate the mass of the bleach.

The volume of bleach = V = 10.0 mLThe density = ρ = 1.00 g/mLThe mass of the bleach
m = ρV
m = 1.00 × 10.00
m = 10.0 grams

From the bleach, we can calculate the mass of sodium hypochlorite.

Mass of the bleach = m = 10.0 gThe percentage = 5.0%The mass of sodium hypochlorite = m₁[tex]percentage \:=\: \frac{m_1}{m} \times 100\%[/tex]
5% ÷ 100% = m₁ ÷ 10.0
0.05 = m₁ ÷ 10.0
m₁ = 0.05 × 10.0
m₁ = 0.5 grams

Then we can calculate the number of moles of sodium hypochlorite.

m₁ = 0.5 gramsMolar mass NaOCl = Mr = 74.44 g/molThe number of moles  
n = m₁ ÷ Mr
n = 0.5 ÷ 74.44
n = 0.0067 mol

The molarity for NaOCl

n = 0.0067 molVolume total for the solution
V = V water + V bleach
V = 100.0 mL + 10.0 m
V = 110.0 mL
V = 0.110 LMolarity
M = n ÷ V
M = 0.0067 ÷ 0.110
M = 0.061 M


Learn more about Stoichiometry here: https://brainly.com/question/26873446

#SPJ4

NaHCO3 + HCI → NaCl + H₂O + CO₂
NaHCO3: 82.99 g/mol
You previously determined that a
particular sealed container holds
0.261 mol CO2 gas. What mass of
NaHCO3 is needed to generate the CO2?
Hint: Use stoichiometry

Answers

Mass of NaHCO3 is needed to generate the CO2 is 0.3043 g.

How do you find the total mass of a product?Mass of reactants equals mass of products. By inserting the word "moles" between each coefficient and formula, this equation may be read in "moles." A ratio of the moles for any two substances in an equation is known as a mole-mole factor.Thus, the mass of the reactant and the mass of the product are identical. A product is the substance created as a result of a chemical reaction, whereas a reactant is the chemical reaction of two or more elements to create a new substance.The ideal gas law, PV=nRT, can be used to determine the molar mass of a gas by substituting the definition of molar mass for n, the number of moles.

Find the attachment answer

Learn more about total mass of a product refer to :

https://brainly.com/question/24928843

#SPJ1

: at low ph you may have seen high absorbance even in the control samples that never had the enzyme added to them. why? what is causing the production of glucose in these samples?

Answers

A Spectrophotometer measures enzyme activity by measuring the rate at which absorbance change. Absorbance means to measure the concentration of the product of an enzyme reaction.

How does low ph causes high absorbance?

Enzyme activity is at its maximum value at the optimum pH. As the pH value is increased above or decreased below the optimum pH the enzyme activity decreases.

So, when the medium of study is highly acidic the breaking of the bonds takes place easily. At lower pH values, the absorbance is high because the acid slows down the enzyme activity thereby changing its optimal pH and causes hydrolysis.

To know more about spectrophotometer and absorbance click on https://brainly.com/question/29560866

#SPJ4

4. Explain why diisopropylamine is a stronger base than aniline nh2 diisopropylamine aniline.

Answers

Answer: Cyclohexylamine is a stronger base than aniline because in aniline electron pair is involved in conjugation, which makes the electron pair unavailable, where as in cyclohexyl amine, the −NH

2

 group is out side the ring and there is no resonance in the ring also, thereby the lone pair present on the nitrogen is freely available, resulting in a stronger base.

Explanation: I dont have one...

You add 100. 0 g of water at 60. 0°c to 100. 0 g of ice at 0. 00°c. Some of the ice melts and cools the water to 0. 00°c. When the ice and water mixture has come to a uniform temperature of 0°c, how much ice has melted?.

Answers

If you mix 100 g of ice at 0.00°c with 60 g of water at 60 °c, then 60 g of ice has melted. The water is cooled to 0.00°c as some of the ice melts. The ice also melted.

Ice has a melting point of 0°C, or 273K. Tungsten, which is used to create the filaments in light bulbs, is the chemical element with the highest melting point (3410°C). The temperature of the system does not rise during the melting process until after the melting point has been reached, even after all the ice has melted. Water is the primary component of the Earth's hydrosphere and the fluids of all known living things. It is an inorganic chemical with the chemical formula H2O(water) and is transparent, tasteless, odourless, and almost colourless.

H = MS(deltaT) (deltaT)

H = 100*4.184*(60-0)

H = 25104J

Now, the amount of heat needed to melt ice to 0 degrees Celsius is given by the formula delta H = 100*2.108 = 421.6J m = 24682.4/40.7*10^3 = 0.606g.

Ice melted to a total of 0.606g.

Learn more about melting here

https://brainly.com/question/29578567

#SPJ4

One periodic trend is Periods represent the number of energy levels in an atom model.

True or False

Answers

There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Therefore, the given statement is true.

What is periodic table?

Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.

Periodic table help a scientist to know what are the different types of elements are present in periodic table so that they can discover the new elements that are not being discovered yet.

One periodic trend is Periods represent the number of energy levels in an atom model. The period number represents the valence shell of an element and hence valence shell is the energy level of the element.

Therefore, the given statement is true.

Learn more about periodic table, here:

https://brainly.com/question/11155928

#SPJ1

what is the concentration of the hydroxide ion given that the concentration of the hydronium ion is 1.5 x 10-5 m? group of answer choices 1.0 × 10-14 m 1.5 × 109 m 6.7 × 10-10 m 1.0 × 10-19 m none of the above

Answers

The concentration of hydroxide ion is 6.7 × 10⁻¹⁰ M.

Water dissociates and forms an equilibrium reaction to give its ionic products  hydronium ion and hydroxide ion. The reaction is given as:

H₂O + H₂O ⇄ H₃O⁺ + OH⁻

The ionic product of water is referred to as Kw, whose value is

Kw =  1 × 10⁻¹⁴ M²

And Kw is equal to the product of the hydroxide ion and hydronium ion concentration.

Kw = [H₃O⁺ ] [OH⁻]

We are given, the hydronium ion concentration is 1.5 × 10⁻⁵ M

So, hydroxide ion concentration can be calculated as:

Kw = [H₃O⁺ ] [OH⁻]

[OH⁻] = Kw/ [H₃O⁺ ]

[OH⁻] =  1 × 10⁻¹⁴ M² / 1.5 × 10⁻⁵ M

[OH⁻] = 6.7 × 10⁻¹⁰ M

Thus, the concentration of hydroxide ion is 6.7 × 10⁻¹⁰ M

To know more about concentration of hydroxide ion here

https://brainly.com/question/15562512

#SPJ4

for each pair of compounds, pick the one with the higher boiling point. explain your reasoning. cs2 or cse2

Answers

Due to the cancellation of the two opposing dipoles within the molecule, CO2 is a nonpolar molecule. Consequently, the modest dispersion forces are its main intermolecular forces.

What are the forces between molecules?

Intermolecular forces are those that exist between molecules. It differs from an intramolecular force—that is, a force that exists within a molecule—because of this. A force within a molecule would therefore resemble a covalent bond. Intermolecular force is the name for the force that exists between molecules.

What are instances of intermolecular forces?

Intermolecular forces operate between molecules. In contrast, intramolecular pressures are produced by molecules themselves. Intermolecular forces are less powerful than intramolecular forces. Intermolecular forces include the London dispersion force, dipole-dipole interaction, ion-dipole interaction, and van der Waals.

To know more about intermolecular force visit:

https://brainly.com/question/9007693

#SPJ4

consider equimolar samples of different ideal gases at the same volume and temperature. gas a has a higher molar mass than gas b. compare the pressures. a>b a

Answers

The ideal gas equation is PV = nRT, The pressure A =B.

Equimolar quantities of salts are taken for double salts education due to the fact the houses of the character cation or anion does no longer alternate in double salts while dissociates and if salts are not in equimolar then they could get precipitate.

An equimolar buffer is one in which the concentration of the susceptible acid (or base) is the same as the concentration of the conjugate ion.

Quantities in chemistry are commonly expressed as moles; whereas concentrations use the time period molar. A mole of some thing is the molecular weight for the compound expressed as grams.

case I

n= same , T= same , V= same Thus

i) pressures  A =B

ii) rmas speed is given by u = (3RT/M)1/2

Thus A with higher molar mass has less rms speed

 A< B

iii) average kinetic energy depends only on temperature (Average Kinetic energy = 3/2 RT)

Thus A =B as they are at same temperature

Case II

C and D are at

 n= same , M = same , V= same T(C) > T(D)

i) pressures   C>D  as P is proportional to T

ii) rms speed

 C>D as rms velocity is proportional to T

iii) average kinetic energy  C >D

Case III

n = same M = same , T = same , V of E >F

i) pressures E<F as P is inversely proprtional to V

ii) rms speed  E =F at same temperature

iii) average kinetic energy E =F

Learn more about equimolar samples here:-https://brainly.com/question/24188709

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

consider equimolar samples of different ideal gases at the same volume and temperature. gas a has a higher molar mass than gas b. compare the pressures. a>b a

Partial bonding, for example, as part of a resonance hybrid, often results in structures with _____.

Answers

Fractional bond orders are frequently produced by partial bonding, such as when it's a component of a resonance hybrid.

Resonance: What does that mean?

Excitation frequency in physics when an unseen force or a buzzing system causes another system close by to vibrate more intensely at a specific operating frequency.

In the actual world, what is resonance?

Any system with a natural frequency has the potential to experience resonance. You've probably encountered a rattle or hum in your automobile that only happens when traveling at a specific pace. This is an illustration of resonant; when you alter your speed, the period of a cyclical driving force the tires provide changes.

To know more about Resonance visit:

https://brainly.com/question/27037762

#SPJ4

5.provide an example of each of the following types of reactions: a.neutralization b.acid and metal c.acid and metal oxide

Answers

Answer:

Neutralization

strong acid and strong basesstrong acid and weak bases

Acid and metal

sulphuric acidnitric acid

acid and metal oxide

basic oxidesneutral oxides

fatty acids are subdivided into two major classes, based on the relative numbers of hydrogen and carbon atoms they contain. what are these two classes

Answers

Most of the herbal fatty acids have a fair wide variety of carbon atoms, because their biosynthesis involves acetyl-CoA, a coenzyme wearing a -carbon-atom institution.

As the quantity of carbons in a fatty acid chain increases, so does the melting point as illustrated in the determine below. thus, shorter chain fatty acids are more likely to be liquid, whilst longer chain fatty acids are more likely to be solid at room temperature (20-25ᐤC, 68-seventy sevenᐤF).

Fatty acids are categorised according to the presence and wide variety of double bonds of their carbon chain. Saturated fatty acids (SFA) comprise no double bonds, monounsaturated fatty acids (MUFA) comprise one, and polyunsaturated fatty acids (PUFA) comprise more than one double bond.

Fatty acids may be divided into four fashionable classes: saturated, monounsaturated, polyunsaturated, and trans fats. Saturated fatty acids and trans fat are related to an improved hazard of coronary heart ailment.

Learn more about fatty acids  here:

https://brainly.com/question/26353151

#SPJ4

Other Questions
1. Find the elements sodium, oxygen, and phosphorus on the periodic table. Describe the monoatomic ions each would form. Then, given what you know about chemical bonding, describe and give the formulas for the types of ionic compounds they would produce with each other. Use the periodic table in the chemistry: problems and solutions book to help with your answers. Write a paragraph about the 1958 Jim crow laws Grayson owns a food truck that sells tacos and burritos. He only has enough suppliesto make 110 tacos or burritos. He sells each taco for $3.25 and each burrito for $7.Grayson must sell a minimum of $560 worth of tacos and burritos each day. If xrepresents the number of tacos sold and y represents the number of burritos sold,write and solve a system of inequalities graphically and determine one possiblesolution. Evaluate the expression: (8 12) + 60 + (4)2. question 8 a gym wants to start offering exercise classes. a data analyst plans to survey 10 people to determine which classes would be most popular. to ensure the data collected is fair, what steps should they take? select all that apply. 1 point what are some of the social and environmental impacts that communities of color experience as a result of the burning of fossil fuels? at the zoo 1/3 of the animals are mammals. 1/4 of the mammals are elephants. what fractuon of the animals at the zoo are elephants What is the average number of times that a specific risk is likely to be realized in a single year?. Marko has $22. He needs at least $42 to go to a concert. How much more money does Marko need? on the drawing tools format tab, in the shape styles group, click the button to change the shape outline of a drawing object. describe the effect of increasing the efferent radius on glomerular capillary pressure and filtration rate are these ciliates more closely related to all other protists than they are to plants, fungi, or animals? select all that apply. are these ciliates more closely related to all other protists than they are to plants, fungi, or animals?select all that apply. ciliates are as closely related to plants as they are to protistan members of the archaeplastida. ciliates are more closely related to all other protists than they are to plants, fungi, and animals. ciliates are more closely related to the unikonta than to fungi and animals. ciliates are as closely related to plants as they are to protistan members of sar. ciliates are as closely related to fungi and animals as they are to protistan member of SAR: Linear relationship. what connections can you make between homeostasis and the reproductive system in the concept map? select all that apply. a significant lag for monetary policy is the time it takes to for a change in the money supply to change the economy. a significant lag for fiscal policy is the time it takes to pass legislation authorizing it. a. true b. false According to marshall mcluhan, a hallmark of the literate era of mass communication was that. Buddhism: What does The term Nirvana refer yo and how do you achieve It? what connects the upper motor neurons to lower motor neurons? what connects the upper motor neurons to lower motor neurons? interneurons sensory neurons primary afferent neuron muscle fibers What three things does dubois state are the goals of washington's agenda for the black people?. what other emerging trend is connected to simplified menus?