at a given instant the current and self-induced emf in an inductor are directed in the same direction. determine the inductance if the induced emf is 17 v and the rate of change of the current is 25 ka/s.

Answers

Answer 1

The inductance is 680µH if the induced emf is 17 v and the rate of change of the current is 25 ka/s.

The magnetic field will change as a result of growing current, so the inductor will resist the flow of current through it, resulting in a decrease in current.

e=induced emf=17V

e=Ldi/dt [di/dt=25000a/s]

17=L×25000

17/25000=L

0.00068=L

680×10⁻⁶Henry

=680µH

Inductance=680µH

What is emf?

The amount of energy delivered per unit of electric charge by a power source, such as a generator or a battery, is known as electromotive force (abbreviated E or EMF).

Energy is converted from one form to another as the generator or battery operates on the electric charge that is carried inside itself. Positive charge is applied to the device's positive terminal, whereas negative charge is applied to the device's negative terminal. The work done on an electrical charge unit, or the energy acquired per electrical charge unit, is known as the electromotive force. It is also referred to as EMF and is denoted by the international metric system's letter E.

To know more about emf:

https://brainly.com/question/15121836

#SPJ4


Related Questions

a uniform thin rod of length 0.832 m0.832 m is hung from a horizontal nail passing through a small hole in the rod located 0.084 m0.084 m from the rod's end. when the rod is set swinging about the nail at small amplitude, what is the period Tt of oscillation?

Answers

The time period of oscillation is 1.670s

What is time period?

A period of time committed for a specific activity that regularly takes up a portion of a calendar year.

Time period of rod is calculated by

T = 2π [tex]\sqrt{\frac{I}{MgD} }[/tex]

Here,

D = x = [tex]\frac{L}{2} -0.084[/tex]

= 0.332m

The moment of inertia = [tex]I[/tex] = [tex]I_cm + MD^2 \\[/tex]

                                         [tex]= \frac{1}{12} MD^2 + Mx^2[/tex]

Time period = 2π [tex]\sqrt{\frac{I}{MgD} }[/tex]

= 2π [tex]\sqrt{\frac{I}{MgD} }[/tex]

where [tex]I =[/tex]   [tex]\frac{1}{12} MD^2 + Mx^2[/tex]

= 2π  [tex]\sqrt{\frac{ \frac{1}{12} 0.832^2 + 0.084^2}{9.8 * 0.084}[/tex]

= 2π [tex]\sqrt{ \frac{0.0576 + 0.00059}{0.8232}[/tex]

= 2π * 0.265

= 1.670s

The time period of oscillation is 1.670s

To know more about time period, check out:

https://brainly.com/question/20070798

#SPJ4

 

how far from the lens must the film in a camera be, if the lens has a 35.0-mm focal length and is being used to photograph a flower 75.0 cm away? explicitly show how you follow the steps in the lenses.

Answers

The lens should be kept at a distance of 3.67 cm from the film in the camera to be photographed and convex lens should be used.

Focal length = f = 35.0 mm = 3.5 cm

Distance at which flower is kept = p = 75 cm

The type of lens that should be used = convex

Distance at which camera should be kept = q =

= Using the lens formula

= 1/p + 1/q = 1/f

= 1/75 + 1/q = 1/3.5

= 1/q = 1/3.5 - 1/75

= q = 3.67 cm

So, the film should be kept 3.67 cm behind the convex lens.

To know more about Convex Lens:

https://brainly.com/question/15579518

#SPJ4

what is the multiple of the eenjrgy needed to escape from earth gives the energy needed to escape from the moonon andn jpitier

Answers

The ratio of energy needed to escape from the surface of the moon to the energy needed to escape from the earth is 0.045

The ratio of energy needed to escape from the surface of Jupiter to energy needed to escape from the earth is  28.5

Calculation:-

Mass of earth = 5.95 *10²⁴ kg

Mass of moon = 7.36*10²² kg

Mass of Jupiter = 1.89 * 10²⁷kg

The radius of the earth = 6.37 * 10⁶ m

The radius of the moon = 1.74 *10⁶ m

The radius of Jupiter = 6.99 *10⁷

The amount of energy needed to escape from the surface is the same as its gravitational potential energy at the original position.

The formula is as follows:

K = GMm/R

where, M, and m are masses, R is the radius, G is the gravitational constant and K is energy.

DetermiNE the ratio of energy needed to escape from the surface of the moon to energy needed to escape from the earth.

find more:-https://brainly.com/app/ask?q=energy+multiply+planets

#SPJ4

A meterstick of negligible mass is placed on a fulcrum at the 0. 4 m mark, with a 1 kg mass hung at the zero mark and a 0. 5 kg mass hung at the 1. 0 m mark. The meterstick is held horizontal and released. Immediately after release, the magnitude of the net torque on the meterstick about the fulcrum is most nearly.

Answers

After release, the magnitude of the net torque on the meterstick about the fulcrum is  nearly 1 N middot  m.

What is fulcrum?

The term fulcrum refers to the point or support on which a lever rotates, or to the center of a key activity.

Given, distance between fulcrum and mark , d = 0.4 m

mass hung with fulcrum , m = 1 kg.

Value of another mass , m = 0.5 kg.

distance kept , d' = 1.0 m.

torque= F d- F1 (d1- d)

Torque = m g - m g(d1 - d)

= 1 * 9.8 * 4 - 0.5 * 9.8(1 - 0.4)

Torque = 1N

Thus,  the magnitude of the torque on the meterstick about the fulcrum is  nearly 1 N middot  m.

To know more about fulcrum, refer

https://brainly.com/question/29566369

#SPJ4

multiple-concept example 7 explores the approach taken in problems such as this one. the blades of a ceiling fan have a radius of 0.380 mm and are rotating about a fixed axis with an angular velocity of 1.50rad/s 1.50rad/s . when the switch on the fan is turned to a higher speed, the blades acquire an angular acceleration of 2.00rad/s2 2.00rad/s2 . after 0.500 ss the blades acquire an angular acceleration of 2.00rad/s2 2.00rad/s2 . after 0.500 ss has clapsed since the switch was resct, what is (a) the total acceleration (in m/s2)m/s2) of a point on the tip of a blade and (b)(b) the angle ϕϕ between the total acceleration a→a→ and the centripetal acceleratio

Answers

The angle of total acceleration with centripetal acceleration is 13.14 degree.

What is acceleration?
The rate at which an object's velocity with regard to time changes is referred to as acceleration in mechanics. It is a vector quantity to accelerate. The direction of an object's acceleration is determined by the net force that is acting on it. the quantity of acceleration a body undergoes in accordance with Newton's Second Law. For instance, when a vehicle moves from the a standstill (nil velocity, inside of an inertial frame of reference to the a straight line at increasing speeds, it accelerates inside the direction of travel.

Here ,
radius , r = 0.380 m
angular velocity , w = 1.50 rad/s
angular acceleration ,alpha = 2 rad/s^2
after the time 0.5 s
for the final angular velocity
wf = wi + alpha * t
wf = 1.50 + 2 * 1
wf = 2.5 rad/s
Centripetal Acceleration: wf2 * r
ac = 2.5^2 * 0.380 m/s^2
ac = 2.375 m/s^2
for tangential acceleration
at = alpha * r
at = 1.5 * 0.380
at = 0.57 m/s^2

a) for the total acceleration = sqrt(at^2 + ac^2)
total acceleration = sqrt(2.375^2 + 0.57^2)
total acceleration = 2.44 m/s^2

b)
angle =arctan(at/acceleration)
angle = arctan(0.57/2.44)
angle = 13.14 degree
The angle of total acceleration with centripetal acceleration is 13.14 degree

To learn more about acceleration
https://brainly.com/question/26408808
#SPJ4

at sea level, at a latitude where , a pendulum that takes 2.00 s for a complete swing back and forth has a length of 0.993 m. what is the value of g in m/s 2 at a location where the length of such a pendulum is 0.960 m for period 2.00 s?

Answers

The value of acceleration due to gravity  in at a location where the length of such a pendulum is 0.960 m for period 2.00 s is 9.48 m/s².

What is the period of oscillation of pendulum?

The period of oscillation of a pendulum is the time taken for the pendulum to complete one cycle.

Mathematically, the period of oscillation is given as;

T = 2π √ (L / g)

where;

T is the period of the oscillationL is the length of the pendulumg is acceleration due to gravity

At a constant period, the final equation becomes;

L₁ / g₁ = L₂ / g₂

g₂ = (g₁L₂) / (L₁)

g₂ = (g₁ x 0.96 ) / (0.993)

g₂ = 0.967 g₁

g₂ = 0.967 x 9.8 m/s²

g₂ = 9.48 m/s²

Learn more about period here; https://brainly.com/question/24255969

#SPJ1

place), estimate the hydraulic conductivity [m/d] of the unconfined aquifer. the radius of influence around the pumping well is approximately 500 m

Answers

It is not possible for me to accurately estimate the hydraulic conductivity of an unconfined aquifer without additional information.

The hydraulic conductivity of an aquifer is a measure of its ability to transmit water, and it depends on various factors such as the porosity and permeability of the aquifer materials, the depth and thickness of the aquifer, the extent of the aquifer's saturation with water, and the hydraulic gradient within the aquifer.

The radius of influence around a pumping well is not necessarily related to the hydraulic conductivity of an aquifer.

In order to estimate the hydraulic conductivity of an unconfined aquifer, a hydrologist would need to conduct detailed field measurements and possibly use modeling techniques to take into account the various factors that affect the aquifer's ability to transmit water.

Learn more about hydraulic conductivity:
https://brainly.com/question/16227436

#SPJ4

how do we know that spheroidal stars (stars in the bulge and halo) are older, on average, than disk stars?

Answers

There are no blue spheroidal stars.

What is meant by  disk stars ?

Population I stars are disc stars. They are therefore relatively young stars with circular orbits in the galactic plane. They are typically rich in metal. As a result of the disk's abundance of gas and dust, vigorous star formation occurs there. The spiral arms of the galaxy are where stars develop.

There is always some matter around the star when it originates, and this material collects into a disc around the rotating star's equator. This substance can also condense into solid or gaseous structures in the form of a disc.

The researchers discovered that the thick disc of the galaxy's stars were, in fact, billions of years older than the stars observed elsewhere.

To learn more about disk star refer to :

https://brainly.com/question/29526164

#SPJ4

A star was observed to have a planet orbiting it at a distance of 1.12×108 km. The orbital period of the planet is 329 days. Calculate the mass of the star.

Answers

The mass of the star would be 9.97 x 10³⁵ Kg.

What is Star? What is centripetal force?Stars are huge celestial bodies made mostly of hydrogen and helium that produce light and heat from the churning nuclear forges inside their cores. We can write the relation absolute magnitude [M] and apparent magnitude [m] as follows : M = m + 5(log₁₀p + 1). The centripetal force is the force needed to make a body move in circular motion. It is given by : F{C} = mv²/r

We have a star was observed to have a planet orbiting it at a distance of 1.12 × 10⁸ km. The orbital period of the planet is 329 days.

Let the mass of star be [M] and that of planet be [m]. Since, the planet revolves around the star, we can write -

F{Centripetal} = F{Gravitation}

mv²/r = GMm/r²

v² = GM/r

(rω)² = GM/r

r²ω² = GM/r

ω² = GM/r³

(2π/T)² = GM/r³

M = (2π/T)² (r³)/G

M = 46.8 x (r³)/G

M = {46.8 x (1.12)³ x (10⁸)³}/{(6.6) x 10 ⁻¹¹}

M = (65.7/6.6) x (10²⁴/ 10 ⁻¹¹)

M = 9.97 x 10³⁵ Kg

Therefore, the mass of the star would be 9.97 x 10³⁵ Kg.

To solve more questions on Stars and astronomy, visit the link below-

brainly.com/question/15581414

#SPJ1

for supersonic flow in a round duct, if the diameter increases what happens to static pressure? group of answer choices

Answers

Answer: it explodes

Explanation:

What must be the units for the gravitational constant g in order for gravitational force to have units of newtons?.

Answers

To convert gravitational force into newtons sm3/(kgs2), we need to know the units again for gravitational constant g.

what is The short answer to  gravity ?

The force that attracts two masses to one another in physics is known as gravity. If you can believe it, every every particle of matter in the cosmos pulls on every other particle. When referring to the attraction between anything with energy or mass, the terms attraction and gravity are sometimes used synonymously.

What is so unique about gravitational force?

Because it continually attempts to bring masses together and drive them apart, the gravitational force is referred to as attractive. Given that the strength of the gravitational attraction is clearly inversely correlated with the masses of the two interdependent parts, it stands to reason that larger, more galaxies will attract one another would fiercely.

To know more about gravitational force visit:

https://brainly.com/question/12528243

#SPJ4

In the photoelectric effect, a stopping potential of 3.2 V is needed for radiation of wavelength 200 nm.
(a)What is the work function (in eV) of the material?
(b) What is the maximum kinetic energy (in eV) of a photoelectron emitted from a surface whose work function is 5.0 eV when illuminated by a light whose wavelength is 200 nm?

Answers

(a) The work function is 7.5(10)¹⁴ Hz.

(b) The kinetic energy of photoelectron is - 1.898 eV

The photoelectric effect consists of the emission of electrons (electric current) that occurs when light falls on a metal surface under certain conditions.  

If the light is a stream of photons and each of them has energy, this energy is able to pull an electron out of the crystalline lattice of the metal and communicate, in addition, a kinetic energy.  

This is what Einstein proposed:  

Light behaves like a stream of particles called photons with an energy  

E = h.ν ----- eq1

So, the energy E  of the incident photon must be equal to the sum of the Work function  Φ of the metal and the kinetic energy K of the photoelectron:  

E = Φ + K ----- eq2

Where Φ is the minimum amount of energy required to induce the photoemission of electrons from the surface of a metal, and its value depends on the surface.  

In case, Φ = 5eV

So, applying equation (1) in this problem:  

E = hν

Where:

h = 4.136(10)⁻¹⁵ eV is Planck constant

ν is the frequency

Now the frequency has an inverse relation with the wavelength

λ = 400(10)⁻⁹ m

ν = c/λ

Being c = 3(10)⁸ m/s is the speed of light in vacuum.

ν = 7.5(10)¹⁴ Hz.

Substituting,

E = 4.136(10)⁻¹⁵ {7.5(10)⁻¹⁰}

E = 3.1 eV

Now,

3.1 eV = 5 ev + K

K = - 1.898 eV

Since a negative kinetic energy is not physically possible, the only explanation is: the conditions for a photoelectric effect were not met, hence the photoelectric effect cannot occur.

Therefore, the main condition for the occurrence of the photoelectric effect is that the energy incident photon  must be greater than the work function and E > Φ

To know more about photoelectric, refer: https://brainly.com/question/26465043

#SPJ4

4. A meteorite travels at 15 km/s before reaching Earth's
atmosphere. Calculate how far it travels in 12 s. (Distance)

Answers

Answer:

180 km

Explanation:

velocity (v) = distance (s)  / time (t)

From there we get that the distance is: s=v*t

s = 15 km/s * 12 s

s =180 km

compared with the buoyant force of the atmosphere on a 1 liter helium filled balloon the buoyant force of the atmosphere on a nearby 1 liter solid iron block is the same. how do you explain this

Answers

The density of fluid which means air is the same for both cases, but the volume of a 1 kg helium balloon is more than the density of iron, so the buoyant force on helium is the same as the buoyant force on iron.

What is Buoyant Force?

The buoyant force is the upward push that a fluid applies to an object when it is submerged in it. The fluid's pressure on the object is what creates the buoyant force. The net upward force results from the fact that the pressure on the bottom of an item is always greater than the force on the top since pressure rises as depth increases.

What is Density?

Mass of a solid substance per unit volume.

d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimetre are a typical unit of measurement for density.

Hence, it can be concluded from this that, the buoyant force on both is the same.

To know more about Buoyant force, check out:

https://brainly.com/question/11884584

#SPJ4

in state-of-the-art vacuum systems, pressures as low as 1.00 10-9 pa are being attained. calculate the number of molecules in a 1.30-m3 vessel at this pressure and a temperature of 31.0°c.

Answers

Number of molecules in the vessel are n = 3.15 x [tex]10^{11}[/tex]  molecules

What pressure ?

A physical formula that states that the ratio of an ideal gas's measurable qualities is P (pressure) V (volume) = n (number of moles) R (the gas constant) T. (temperature in Kelvin). It is developed from a synthesis of the Boyle, Charles, and Avogadro gas laws. referred to as the universal gas law.

According to the given information

P = 1.00 x 10-9 Pa

V = 1.30 [tex]m^{3}[/tex]

Temperature T =  26° C = 299.15 K

Known

Gas constant R = 8.314 J/ moles K

Avogadro's constant N = 6.022 x [tex]10^{23}[/tex]

Solution :

PV = n RT

1.00 x [tex]10^{-9}[/tex] x 1.30 = n x 8.314 x 299.15

n = 5.23 x [tex]10^{-13}[/tex]  moles

n  = 5.23 x [tex]10^{-13}[/tex] x 6.022 x [tex]10^{23}[/tex]

n = 3.15 x [tex]10^{11}[/tex]  molecules

Number of molecules in the vessel are n = 3.15 x [tex]10^{11}[/tex]  molecules

To know more about Ideal gas

https://brainly.com/question/28257995

#SPJ4

A skateboarder traveling at 13.6 meters per second rolls rona stop at the top of a ramp in 2.5 seconds. What is the skateboarder’s acceleration

Answers

Answer:

Below

Explanation:

Acceleration =  Δ v / Δ t   =  -13.6 m/s   /  2.5 s =  - 5.4 m/s^2

   ( the negative sign shows this to be a deceleration)

evidence from distant supernovae (as well as from studies of the cosmic microwave background) seems to suggest that the universe is doing something that goes against what nearly all astronomers expected just a decade ago. what is this phenomenon, which is variously attributed to things called the cosmological constant, dark energy, or quintessence?

Answers

The first light to ever be capable of freely circling the entire universe is what is known as the Cosmic Microwave Background (CMB), and it has since been cooled.

What is Cosmic Microwave Background (CMB) radiation?In 1965, the CMB radiation was unintentionally discovered. Two radio astronomers from the United States, Penzias and Wilson, recorded a signal in their radio telescope that was impossible to attribute to a specific source in the sky. Day or night, summer or winter, it appeared to have the same intensity everywhere. They came to the conclusion that the signal had to originate from outside of our galaxy. It almost came from the beginning of the universe.Their discovery was viewed by scientists as strong support for the "Big Bang" theory. According to this theory, the 'shockwave' of that primordial explosion would still be observable as a subdued 'wallpaper' coming from everywhere behind all galaxies, quasars, and galaxy clusters. As of right now, the Big Bang theory is still the only theory that can satisfactorily account for the CMB's existence. This theory proposes that the Universe initially consisted of a very hot and dense phase that expanded and then naturally cooled; the temperature during this period was so high that neutral atoms could not form for several hundreds of thousands of years. Neutrons and charged particles were the primary components of matter. At that time, light and matter were tightly coupled because electrons and light particles interacted closely. The Universe was opaque as a result of the inability of light to propagate.

To Learn more About  Cosmic Microwave Background refer to:

https://brainly.com/question/12468898

#SPJ4

quadrasteer steering systems are being discussed. technician a says at low speeds, the rear wheels turn in the same direction as the front wheels. technician b says at high speeds, the rear wheels turn in the direction opposite to the front wheels. who is correct?

Answers

Neither a or b is correct.

What is speed?

An object's velocity (commonly denoted by v) is the rate of change of position over time, or the rate of change of position per unit time. So it's a scalar quantity. The average velocity of an object over a time interval is the distance traveled by the object divided by the duration of the interval. The instantaneous velocity is the limit of the average velocity as the time interval approaches zero. Velocity is not the same as speed.

Velocity is the dimension of distance divided by time. The SI unit for speed is meters per second (m/s), but the most common everyday speed units are kilometers per hour (km/h) or miles per hour (mph) in the US and UK. ). Knots are widely used in air and sea travel.

According to special relativity, the fastest speed at which energy or information can travel is the speed of light in a vacuum c = 299792458 meters/second (approximately 10790000000 km/h or 671000000 mph). Matter can never fully reach the speed of light because it requires infinite energy. In relativity physics, the concept of velocity replaces the classical idea of ​​velocity.

Therefore, Neither a or b is correct

To know more about speed, check out:

https://brainly.com/question/13943409

#SPJ4

describe the relationship between the force and length and how the curves differ between a weak spring and a strong spring

Answers

The relationship between the force and length is given by  F = -kx.

What is hooke's law?

The force a spring applies to items fastened to its ends is proportional to the distance the spring travels from its equilibrium length and is always pointed in the direction of equilibrium.

The equilibrium point of the spring's free end is at x = 0, and if the x-axis of a coordinate system is selected to be parallel to the spring, then

F = -kx.

The term "spring constant" refers to the proportional constant k.

So,

K will be large if the spring is stiff or powerful, and it will be little if the spring is weak.

According to hooke's law

ΔF / Δx = k

Slope of the graph gives "spring constant"

So,

If we consider strong spring, then curve will have high slope.

and if we consider weak spring, then the curve will have low slope.

To know more about hooke's law, check out:

https://brainly.com/question/24637789

#SPJ4

if it is known that the toggle clamp is a machine, what assumptions can be made about it? check all that apply. (you must provide an answer before moving to the next part.)

Answers

A toggle clamp is a device that you employ, often but not exclusively as part of a production process, to firmly place components or parts in place.

Explain about toggle clamp.

A toggle clamp's main characteristics are its rapid action and ability to be easily turned on and off by an operator. Toggle clamps also lock in place firmly. Because of this, toggle clamps are frequently employed in production lines where components need to be held firmly and quickly removed during routine manufacturing procedures.

Toggle clamps with standard or light action are often constructed from components of pressed steel that have been zinc-plated.

Depending on the setting in which you work, Stainless Steel is another alternative for Toggle Clamp production. Stainless steel toggle clamps are frequently used in regulated areas where hygiene is crucial, such as the food industry and the pharmaceutical business.

To know more about toggle clamps use link below:

https://brainly.com/question/20729246

#SPJ4

A 4. 0-kilogram object is accelerated at 3. 0 meters per second^2 north by an unbalanced force. The same unbalanced force acting on a 2. 0-kilogram object will accelerate this object toward the north at.

Answers

According to the given statement 6.0 m/s² accelerate this object toward the north at.

What is a acceleration explain?

Velocity: the rate at which direction and velocity of a moving item vary over time. When something moves faster or slower, it is considered to be accelerating. Motion on a circle increases even while the speed remains constant because the vector will always be changing.

Briefing:

The force is directly related to the rate of change in momentum, according to Newton's second law of motion.

F is the energy, m is the mass, and an is the acceleration, so F = ma.

F = 4 × 3

 = 12 Newtons

The same force acts on a 2.0 kg object

F = ma

a = F/ m

 = 12 /2

 = 6.0 m/s²

To know more about Acceleration visit:

https://brainly.com/question/12550364

#SPJ4

an object is 50 cm from a concave mirror with radius of curvature of magnitude 60 cm. what is the transverse magnification produced by the mirror?

Answers

An object is 50 cm from a concave mirror with radius of curvature of magnitude 60 cm. The transverse magnification produced by the mirror is 75 cm.

To find the transverse magnification, the given data is,

object distance=p=50cm

Radius of curvature=R=60cm

What is the magnification?

Magnification refers to the image's size in relation to the item that produced it.

The ratio of image length to object length, measured in planes perpendicular to the optical axis, is referred to as linear magnification.

For imaging, optical microscopes combine ocular and objective lenses. The sum of the magnifying powers of the individual lenses produces the observation magnifying power.

then f=R/2

f=60/2

f=30cm

Using mirror formula,

1/f=1/p+1/q

1/30=1/50+1/q

1/30–1/50=1/q

(5–3)/150=1/q

2/150=1/q

2q=150

q=75

The transverse magnification produced by the mirror is 75 cm.

Learn more about Magnification,

https://brainly.com/question/20368024

#SPJ1

the mass of the puck is difficult to measure because it sublimates and looses mass over time. can this explain the difference between the spring constants you found in part 1 and part 2? give your answer as a cer.

Answers

The spring stiffness is quantified by the spring constant, or k. For various springs and materials, it varies. The stiffer the spring is and the harder it is to stretch, the larger the spring constant.

F = -kx. The term "spring constant" refers to the proportional constant k. It gauges the stiffness of the spring. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that differs by an amount x from its equilibrium length. A large value of k indicates that more force is needed to stretch it a given distance than would be necessary to stretch a less stiff spring the same distance.

Learn more about spring constant here-

https://brainly.com/question/14159361

#SPJ4

two inductors of self-inductance l1 and l2 are connected in parallel. the inductors are magnetically shielded from one another so that neither produces flux in the other. show that the self-inductance of the combination is given by 1 l

Answers

Voltage is proportional to inductance just as, for resistors, it is proportional to resistance. Now, the (independent) voltages for parallel elements are equal (V₁ = V₂) and the currents (which are generally functions of time) add i(t) = i₁(t) + i₂(t)

This leads to the equation,

i = i₁ + i₂ + i₃ = V [(1/R₁) + (1/R₂) + (1/R₃)] for resistors.

We note that this condition on the currents implies

d₁(t)/dt + d₂(t)/dt = d(it)/dt

Thus, although the inductance equation, ε = -L(di/dt) involves the rate of change of current, as opposed to current itself, the conditions that led to the parallel resistor formula also apply to inductors.

Therefore, 1/L(eq) = 1/L₁ + 1/L₂

Therefore to ensure the independence of the voltage values, it is important that the inductors not be too close together. The requirement is that the field of one inductor not to have significant influence (or "coupling") in the next.

To know more about inductance, refer: https://brainly.com/question/10254645

#SPJ4

a friend of yours is loudly singing a single note at 500 hz while racing toward you at 27.2 m/s on a day when the speed of sound is 343 m/s. what frequency do you hear?

Answers

The frequency heard by you is 6305.15 Hz.

Given that,

f₁ = 500 Hz

v₁ = 27.2 m/s

f₂ = ?

v₂ = 343 m/s

If the frequency of a wave is directly proportional to the velocity.

We know that, f = kv

where, f is frequency

k is constant of proportionality

v is velocity

k = f/v

From the above formula, we can write, f₁ /v₁ = f₂ /v₂

We have to find out f₂, f₂ = f₁ *v₂ /v₁

Substituting the values, we have,

f₂ = 500* 343/ 27.2 = 6305.15 Hz

Thus, the frequency heard by you is 6305.15 Hz.

To know more about frequency:

https://brainly.com/question/14789089

#SPJ4

what frequency of rotation, in rpm , is required to give an acceleration of 1.4 g to an astronaut's feet, if her feet are 1.1 m from the platform's rotational axis?

Answers

The frequency of the rotation having a radius of 1.1 m is 3.53 rpm

The rotational acceleration = 1.4 g

The radius of the rotation = 1.1 m

The frequency of the rotation can be found using the formula,

         ω = √(α/r)

where ω is the frequency of the rotation

           α is the acceleration of the rotation

           r is the radius of the rotation

Let us substitute the known values in the above equation, we get

     

       ω = √ (1.4 x 9.8 / 1.1 )

           = √ (13.72 / 1.1)

           = √12.47

       ω = 3.53

Therefore the frequency of the rotation is 3.53 rpm

Learn more about the frequency of rotation in

https://brainly.com/question/26104992

#SPJ4

Ben is measuring the effect that the potential energy of an object has on the height of an object's bounce
Which variable represents the height of an object's bounce?
Independent variable
Confounding variable
Response variable
Explanatory variable

Answers

The variable which represents the height of an object's bounce is Option A. Response variable

What is a response variable ?

In a study or experiment, the query is focused on the response variable. A variable that explains changes in another variable is an explanatory variable. Anything could have an impact on the response variable.

The variable whose fluctuation depends on other variables is known as a response variable (or dependent variable).

The independent variable, often known as the explanatory variable, and the response variable are frequently connected. In an experiment, the response variable is the thing that changes, frequently as a result of variations in the explanatory factors.

To know more about response variable you may visit the link:

https://brainly.com/question/14662435

#SPJ4

Which of the following graphs shows the correct relationship betwveen the pressure and volume of an ideal gas at a given temperature? Note the origin corresponds to P= 0 and V= 0.

Answers

The volume and temperature graph is straight line passing through origin .

The origin corresponds to V = 0 and T = 0, the volume of gas is directly proportional to absolute temperature at constant pressure. so the volume and temperature graph is straight line passing through origin.

The cube (x3) of a unit of length represents a unit of volume in its most basic form. The cubic metre is the comparable unit of volume, for instance, if the metre (m) is chosen as the length unit (m3). [12] So, L3 is the unit dimension for volume, a SI-derived unit. [13] Metric prefixes that are strictly powers of ten are used with the metric units of volume. When prefixes are applied to volume units, which are stated as units of length cubed, the cube operators are applied to the unit of length containing the prefix. Converting from cubic centimeter to cubic meter is demonstrated by the following formula: 2.3 cm3 = 2.3 (cm)3 = 2.3 (0.01 m)3 = 0.0000023 m3 (five zeros).

Learn more about volume here:

https://brainly.com/question/17322215

#SPJ4

the coefficient of kinetic frition between an object and the surface upon which it is sliding is 0.10. the mass of the object is 8.0 kg. what is the force of friction

Answers

The force of friction is 0.8 N.

Friction is the force that prevents motion when the surface of one object comes into contact with the surface of another.

It also has the same SI unit as other forces have as Newton (N).Frictional force can be calculated by the formula F = μ * Fn

μ  is the coefficient of friction between the surfaces which are in the contact.

Fn is the normal force acting on the object due to its mass.

Mass of the object = m = 8.0 kg

coefficient of kinetic friction between an object and the surface upon which it is sliding  = 0.10

Frictional force = F = 8.0 * 0.10

F = 0.8 N

The force of friction is 0.8 N.

To know more about friction,

https://brainly.com/question/20912218

#SPJ4

four resistors of 3.40 ohms, 6.54 ohms, 8.32 ohms, and 1.34 ohms are connected in parallel with a 12.0 v battery. find the total resistance, in ohms, of the circuit.

Answers

The circuit's overall resistance, measured in ohms, is 9.23A. when a 12.0 v battery is linked in parallel with four resistors that have resistance values of 3.40 ohms, 6.54 ohms, 8.32 ohms, and 1.34 ohms.

How can we determine the circuit's overall resistance?

You add up the individual resistances to determine the total overall resistance of several resistors connected in this manner. The formula used for this is as follows: Rtotal = R1 + R2 + R3, and so forth. Example: For these three resistors connected in series, determine the total resistance.

How much resistance is there in total?

The sum of each component resistance in a series circuit represents the circuit's overall resistance.

1 / Req = 1 /R1 + 1 / R2 + 1 / R3 + 1 /  R4

Req = 1.3ohms

Current = V / R

I = 9.23A

To know more about resistance visit:-

https://brainly.com/question/29427458

#SPJ4

Other Questions
a cylinder shaped can needs to be constructed to hold 400 cubic centimeters of soup. the material for the sides of the can costs 0.04 cents per square centimeter. the material for the top and bottom of the can needs to be thicker, and costs 0.08 cents per square centimeter. find the dimensions for the can that will minimize production cost. helpful information: h : height of can, r : radius of can volume of a cylinder: v from peak to trough a wave on the ocean measures 15\;\mathrm{m}15m in height and has a wavelength of 12\;\mathrm{m}12m. what is the amplitude of the wave? A large conical tank is positioned so that its vertex is pointed downward. Water drains out from a hole at the vertex. As the water drains, the height of the water (measured from the vertex to the top surface) is always twice the radius of the waters surface.a. draw and label a diagram of the situation, defining any variables you useb. write a function that gives the volume of the water in the cone as a function of radius of the water at the top surface, using no other variables/parameters.c. using variable t to represent the time aspect of these changes, what rate of change notation can we use for how the volume of water changes with respect to time and how the radius of the water at the top surface changes with respect to time? (notation for the two quantities only, not an equation)d. Starting from the original quantity relation in (b) determine the equation that relates their rates of change with respect to time, that is "find the related rates equation"e.suppose that the water drains from the cone at a constant rate of 15 cm^3 per second. how fast is the radius of the top surface of the water changing when the radius measures 75 cm? write your result in a complete sentence2. use implicit differentiation to determine dy/dx for the following relation: sin(2x^2y^3)-3x^3=1 2. What political party or interest group do you think will best help you achieve your goal? Explain why you chose this group and why you did not choose one or more of the others that you considered above. mr banda is buying chocolate bars and hot chips for his students who scored meets and masters on the semester exam. chocolate bars cost $1.1 you each and hot chips 0.40 each Mr banda spent $87 on buying 130 chocolate bars and hot chips. how many chocolate bars did Mr banda buy? What mode of transportation is limited to specialized products such as liquids and gases?. a bottle of perfume is dropped in the corner of a room; the scent can be detected everywhere gas law Which stage of the cell cycle listed below does NOT involve division of the nucleus?a. interphaseb. prophasec. metaphased. anaphasee. telophase pawprints paint recently went public in a best efforts offering. the company offered 75,000 shares of stock for sale at an offer price of $39 per share. the administrative costs associated with the offering were $315,000 and the underwriter's spread was 6.5 percent. after completing their sales efforts, the underwriters determined that they sold a total of 71,200 shares. what were the net proceeds to the company? if sodium was not able to be extracted on the ascending end of the loop of henle, what do you predict would happen? the government decides to increase the per-unit tax on the producers of a good only to find that total tax revenue generated by the tax declines. then, in that range, the cumulative amount of a tangible asset's cost that has been depreciated in all prior years plus the current year is called Which of the following best explains how environmental stressors, such as wildfires can affect biodiversity in an ecosystem what challenges did toby johnson face when she first took over as manufacturing manager at the williamsport plant? a nurse enters the client's room and finds the client lying on the floor experiencing a seizure. after stabilizing the client, the nurse informs the health care provider. the health care provider advises the nurse to prepare an incident report. what is the purpose of an incident report? compared with controls, during emotional processing depressed people show increased activation in the ______, and during cognitively demanding tasks they show increased activity in the _____.amygdala; frontal lobes The following loop is intended to print the numbers2 4 6 8 10Fill in the blank:for i in ________: print (i) which of the following is an example of a parasite? a. a worm in your intestine b. a lion hunting zebras c. bee stinger in your arm d. a honeybee on a flower Can someone help, please A 5. 00-m-long ladder, weighing 200 n, rests against a smooth vertical wall with its base on a horizontal rough floor, a distance of 1. 20 m away from the wall. The center of mass of the ladder is 2. 50 m from its base, and the coefficient of static friction between the ladder and the floor is 0. 200. How far up the ladder, measured along the ladder, can a 600-n person climb before the ladder begins to slip?.