Answer:
The sample mean is 9.875 standard deviations from the mean of the distribution of sample
Step-by-step explanation:
Z-score:
In a set with mean [tex]\mu[/tex] and standard deviation s, the zscore of a measure X is given by:
[tex]Z = \frac{X - \mu}{s}[/tex]
The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.
In this question:
[tex]X = 17.79, \mu = 17, s = 0.08[/tex]
How many standard deviations is the sample mean from the mean of the distribution of sample?
[tex]Z = \frac{X - \mu}{s}[/tex]
[tex]Z = \frac{17.79 - 17}{0.08}[/tex]
[tex]Z = 9.875[/tex]
The sample mean is 9.875 standard deviations from the mean of the distribution of sample
Solving by fractions
Answer: Step 3
Step-by-step explanation:
x = -9 or 1. She flipped the signs.
Hope it helps <3
━━━━━━━☆☆━━━━━━━
▹ Answer
Step 3
▹ Step-by-Step Explanation
Juliet flipped the signs. The final answer should be (-9, 1)
Hope this helps!
CloutAnswers ❁
Brainliest is greatly appreciated!
━━━━━━━☆☆━━━━━━━
The volume of a cantaloupe is approximated by Upper V equals four thirds pi font size decreased by 5 r cubed . The radius is growing at the rate of 0.5 cm divided by week, at a time when the radius is 6.4 cm. How fast is the volume changing at that moment?
Answer:
308.67 cm ^ 3 / week
Step-by-step explanation:
A cantaloupe is approximately a sphere, therefore its approximate volume would be:
V = (4/3) * pi * (r ^ 3)
They tell us that dr / dt 0.5 cm / week and the radius is 6.4 cm
if we derive the formula from the volume we are left with:
dV / dt = (4/3) * pi * d / dr [(r ^ 3)]
dV / dt = (4/3) * pi * 3 * (r ^ 2) * dr / dt
dV / dt = 4 * pi * (r ^ 2) * dr / dt
we replace all the values and we are left with:
dV / dt = 4 * 3.14 * (6.4 ^ 2) * 0.6
dV / dt = 308.67
Therefore the volume is changing at a rate of 308.67 cm ^ 3 / week
The point P(7, −2) lies on the curve y = 2/(6 − x). (a) If Q is the point (x, 2/(6 − x)), use your calculator to find the slope mPQ of the secant line PQ (correct to six decimal places) for the following values of x.
(i) 6.9
mPQ = 1
(ii) 6.99
mPQ = 2
(iii) 6.999
mPQ = 3
(iv) 6.9999
mPQ = 4
(v) 7.1
mPQ = 5
(vi) 7.01
mPQ = 6
(vii) 7.001
mPQ = 7
(viii) 7.000
mPQ = 8
(b) Using the results of part (a), guess the value of the slope m of the tangent line to the curve at
P(7, −2).
m = 9
(c) Using the slope from part (b), find an equation of the tangent line to the curve at
P(7, −2).
The equation of the tangent line to the curve at P(7, -2) is y = 2x -16.
For each given value of x, we substitute the coordinates of P and Q into the slope formula to find the slope mPQ.
(i) For x = 6.9:
mPQ = (2/(6 - 6.9) - (-2)) / (6.9 - 7)
= 2.22
(ii) For x = 6.99:
mPQ = (2/(6 - 6.99) - (-2)) / (6.99 - 7)
= 2.020
(iii) For x = 6.999:
mPQ = (2/(6 - 6.999) - (-2)) / (6.999 - 7)
= 2.002002
(iv) For x = 6.9999:
mPQ = (2/(6 - 6.9999) - (-2)) / (6.9999 - 7)
= 2.000200
(v) For x = 7.1:
mPQ = (2/(6 - 7.1) - (-2)) / (7.1 - 7)
= 1.818182
(vi) For x = 7.01:
mPQ = (2/(6 - 7.01) - (-2)) / (7.01 - 7)
= 1.980198
(vii) For x = 7.001:
mPQ = (2/(6 - 7.001) - (-2)) / (7.001 - 7)
= 1.998002
(viii) For x = 7.0001:
mPQ = (2/(6 - 7.0001) - (-2)) / (7.0001 - 7)
= 1.999800
By observing the pattern in the calculated slopes, we can see that as x approaches 7, the slope of the secant line PQ approaches 2.
Using the point-slope form, we have:
y - y₁ = m(x - x₁)
Substituting the values of P(7, -2), we have:
y - (-2) = 2(x - 7)
y = 2x -16
Therefore, the equation of the tangent line to the curve at P(7, -2) is y = 2x -16.
Learn more about the equation of the tangent line here:
https://brainly.com/question/31583945
#SPJ12
Crane Company reports the following for the month of June.
Date
Explanation
Units
Unit Cost
Total Cost
June 1 Inventory 150 $4 $600
12 Purchase 450 5 2,250
23 Purchase 400 6 2,400
30 Inventory 80
Assume a sale of 500 units occurred on June 15 for a selling price of $7 and a sale of 420 units on June 27 for $8.
Calculate cost of goods available for sale.
Calculate Moving-Average unit cost for June 1, 12, 15, 23 & 27. (Round answers to 3 decimal places, e.g. 2.525.)
Answer:
Crane CompanyJune Financial Reports
a) Cost of goods available for sale = $5,250
b) Moving-Average unit cost for:
i) June 1: = $5
ii) 12: = $4.75
iii) 15: = $4.75
iv) 23: = $5.75
v) 27: = $5.25
Step-by-step explanation:
a) Calculations:
Date Explanation Units Unit Cost Total Cost Moving Average Cost
June 1 Inventory 150 $4 $600 $4.000
12 Purchase 450 5 2,250 4.750
15 Sale 500 7 3,500 4.750
23 Purchase 400 6 2,400 5.750
27 Sale 420 8 3,360 5.250
30 Inventory 80
Cost of goods available for sale = Cost of Beginning Inventory + Cost of Purchases = $5,250 + ($600 + 2,250 + 2,400)
b) Moving-Average unit cost for:
i) June 1: Cost of goods available/Units of goods available = $5 ($600/150)
ii) 12: Cost of goods available/Units of goods available = $4.75 ($600 + 2,250/600)
iii) 15: Cost of goods available/Units of goods available = $4.75 ($475/100)
iv) 23: Cost of goods available/Units of goods available = $5.75 ($475 + 2,400)/500
v) 27: Cost of goods available/Units of goods available = $5.25 ($420/80)
which of the following statements is false?
Answer:
A.
Step-by-step explanation:
It's the first one. The angles are supplementary not complementary.
Answer:
I would have to say A
Step-by-step explanation:
Hello, can someone help me with this problem?
Answer:
Area of Rectangle A
[tex]Area = 4x^2[/tex]
Area of Rectangle B
[tex]Area = 2x^2[/tex]
Fraction
[tex]Fraction =\frac{2}{3}[/tex]
Step-by-step explanation:
From the attached, we understand that:
The dimension of rectangle A is 2x by 2x
The dimension of rectangle B is x by 2x
Area of rectangle is calculated as thus;
[tex]Area = Length * Breadth[/tex]
Area of Rectangle A
[tex]Area = 2x * 2x[/tex]
[tex]Area = 4x^2[/tex]
Area of Rectangle B
[tex]Area = x * 2x[/tex]
[tex]Area = 2x^2[/tex]
Area of Big Rectangle
The largest rectangle is formed by merging the two rectangles together;
The dimension are 3x by 2x
The Area is as follows
[tex]Area = 2x * 3x[/tex]
[tex]Area = 6x^2[/tex]
The fraction of rectangle A in relation to the largest rectangle is calculated by dividing area of rectangle A by area of the largest rectangle;
[tex]Fraction = \frac{Rectangle\ A}{Biggest}[/tex]
[tex]Fraction =\frac{4x^2}{6x^2}[/tex]
Simplify
[tex]Fraction =\frac{2x^2 * 2}{2x^2 * 3}[/tex]
[tex]Fraction =\frac{2}{3}[/tex]
Find the value of x. Then find the measure of each labeled angle. x = 37.5; the labeled angles are 77.5º and 102.5º. x = 37.5; the labeled angles are 37.5º and 142.5º. x = 15; both labeled angles are 55º. x = 25; both labeled angles are 65º.
Answer:
x = 25; both labeled angles are 65º
Step-by-step explanation:
To find the value of x, recall that the angles formed by two parallel lines on the same line are equal if they correspond to each other.
In the figure given above, we have two parallel line given. The angle formed by each parallel line is corresponding to the other. Therefore, both angles formed are equal.
Thus,
(3x - 10)° = (x + 40)°
Solve for x
3x - 10 = x + 40
Subtract x from both sides
3x - 10 - x = x + 40 - x
3x - x - 10 = x - x + 40
2x - 10 = 40
Add 10 to both sides
2x - 10 + 10 = 40 + 10
2x = 50
Divide both sides by 2
2x/2 = 50/2
x = 25
*Plug in the value of x to find the measure of each labelled angles:
(3x - 10)° = 3(25) - 10 = 75 - 10 = 65°
(x + 40)° = 25 + 40 = 65°
Answer in POINT-SLOPE FORM:
Complete the point-slope equation of the line through (1,3) and (5,1) Use exact numbers!
Answer:
y - 3 = (1/2)(x - 1)
Step-by-step explanation:
As we go from (1, 3) to (5, 1), we see that x (the run) increases by 4 and y (the rise) decreases by 2. Hence, the slope is m = rise / run = 2/4, or m = 1/2.
Then the desired point slope equation is y - 3 = (1/2)(x - 1).
What is the measure of
Answer:
C. 35
55 degrees + 35 degrees= 90 degrees
A normally distributed data set with a mean of 35 and a standard deviation of 5 is represented by the normal curve. What is the z–score corresponding to 45?
Answer:
The z–score corresponding to 45 is z=2.
Step-by-step explanation:
We have a random variable X represented by a normal distribution, with mean 35 and standard deviation 5.
The z-score represents the value X relative to the standard normal distribution. This allows us to calculate probabilities for any given normal distribution with the same table.
The z-score for X=45 can be calculated as:
[tex]z=\dfrac{X-\mu}{\sigma}=\dfrac{45-35}{5}=\dfrac{10}{5}=2[/tex]
The z–score corresponding to 45 is z=2.
16. How much money will I need to have at retirement so I can withdraw $60,000 a year for 20 years from an account earning 8% compounded annually? a. How much do you need in your account at the beginning b. How much total money will you pull out of the account? c. How much of that money is interest?
Answer:
starting balance: $636,215.95total withdrawals: $1,200,000interest withdrawn: $563,784.05Step-by-step explanation:
a) If we assume the annual withdrawals are at the beginning of the year, we can use the formula for an annuity due to compute the necessary savings.
The principal P that must be invested at rate r for n annual withdrawals of amount A is ...
P = A(1+r)(1 -(1 +r)^-n)/r
P = $60,000(1.08)(1 -1.08^-20)/0.08 = $636,215.95
__
b) 20 withdrawals of $60,000 each total ...
20×$60,000 = $1,200,000
__
c) The excess over the amount deposited is interest:
$1,200,000 -636,215.95 = $563,784.05
i-Ready
Sofia
The area of a rectangle is 7/9 square feet. The width of the rectangle is 2 1/3 feet. What is the length of the rectangle?
Answer:
1/3 feet.
Step-by-step explanation:
The length = area / width
= 7/9 / 2 1/3
= 7/9 / 7/3
= 7/9 * 3/7
= 3/9
= 1/3 feet,
The diagram shows the first four patterns of a sequence. Find an expression for the numbers of squares in the nth pattern of the sequence.
Answer:
n^2+3
Step-by-step explanation:
As we can see in the diagram
1st pattern consists from 1 square 1x1 +3 squares 1x1 each
2nd pattern consists from 1 square 2x2 +3 squares 1x1 each
3-rd pattern consists from 1 square 3x3 +3 squares 1x1 each
4-th pattern consists from 1 square 4x4 + 3 squares 1x1 each
We can to continue :
5-th pattern consists from 1 square 5x5+3 squares 1x1 each
So the nth pattern consists from 1 square nxn+3 squares 1x1 each
Or total amount of 1x1 squares in nth pattern N= n^2+3
The expression for the numbers of squares in the nth pattern of the sequence is [tex]n^{2} +3[/tex].
What is nth term of a sequence?"The nth term of a sequence is a formula that enables us to find any term in the sequence. We can make a sequence using the nth term by substituting different values for the term number(n) into it."
From the given diagram
We can see that every term is made up with a square which side is n and three small square side is 1.
So,
1st term is 1 × 1 + 3 = 4
2nd term is 2 × 2 + 3 = 4
3rd term is 3 × 3 + 3 = 12
4th term is 4 × 4 + 3 = 19
So, nth term is [tex]n^{2} +3[/tex]
Hence, The expression for the numbers of squares in the nth pattern of the sequence is [tex]n^{2} +3[/tex].
Learn more about nth term of a sequence here
https://brainly.com/question/24306119
#SPJ2
We are standing on the top of a 320 foot tall building and launch a small object upward. The object's vertical altitude, measured in feet, after t seconds is h ( t ) = − 16 t 2 + 128 t + 320 . What is the highest altitude that the object reaches?
Answer:
The highest altitude that the object reaches is 576 feet.
Step-by-step explanation:
The maximum altitude reached by the object can be found by using the first and second derivatives of the given function. (First and Second Derivative Tests). Let be [tex]h(t) = -16\cdot t^{2} + 128\cdot t + 320[/tex], the first and second derivatives are, respectively:
First Derivative
[tex]h'(t) = -32\cdot t +128[/tex]
Second Derivative
[tex]h''(t) = -32[/tex]
Then, the First and Second Derivative Test can be performed as follows. Let equalize the first derivative to zero and solve the resultant expression:
[tex]-32\cdot t +128 = 0[/tex]
[tex]t = \frac{128}{32}\,s[/tex]
[tex]t = 4\,s[/tex] (Critical value)
The second derivative of the second-order polynomial presented above is a constant function and a negative number, which means that critical values leads to an absolute maximum, that is, the highest altitude reached by the object. Then, let is evaluate the function at the critical value:
[tex]h(4\,s) = -16\cdot (4\,s)^{2}+128\cdot (4\,s) +320[/tex]
[tex]h(4\,s) = 576\,ft[/tex]
The highest altitude that the object reaches is 576 feet.
11. If 4 < x < 14, what is the range for -x - 4?
Answer:
-18 < -x-4 < -8
Step-by-step explanation:
We start with the initial range as:
4 < x < 14
we multiplicate the inequation by -1, as:
-4 > -x > -14
if we multiply by a negative number, we need to change the symbols < to >.
Then, we sum the number -4, as:
-4-4> -x-4 > -14-4
-8 > -x-4 > -18
Finally, the range for -x-4 is:
-18 < -x-4 < -8
The first card selected from a standard 52-card deck was a king. If it is returned to the deck, what is the probability that a king will be drawn on the second selection
Answer:
[tex]\frac{1}{13}[/tex]
Step-by-step explanation:
The probability P(A) that an event A will occur is given by;
P(A) = [tex]\frac{number-of-possible-outcomes-of-event-A}{total-number-of-sample-space}[/tex]
From the question,
=>The event A is selecting a king the second time from a 52-card deck.
=> In the card deck, there are 4 king cards. After the first selection which was a king, the king was returned. This makes the number of king cards return back to 4. Therefore,
number-of-possible-outcomes-of-event-A = 4
=> Since there are 52 cards in total,
total-number-of-sample-space = 52
Substitute these values into equation above;
P(Selecting a king the second time) = [tex]\frac{4}{52}[/tex] = [tex]\frac{1}{13}[/tex]
If x is a binomial random variable with n trials and success probability p , then as n gets smaller, the distribution of x becomes
Answer:
If the value of n gests smaller then the distribution of X would be more skewed, that's a property of the binomial distribution
Step-by-step explanation:
For this problem we are assumeing that the random variable X is :
[tex] X \sim Bin(n,p)[/tex]
If the value of n gests smaller then the distribution of X would be more skewed, that's a property of the binomial distribution and if we don't satisfy this two conditions:
[tex] n p>10[/tex]
[tex]n(1-p) >10[/tex]
Then we can't use the normal approximation
Write an equation:
For every 2 apples there
are 6 bananas
Answer:
[tex]2a=6b\\a=3b[/tex]
Step-by-step explanation:
Let [tex]a[/tex] equal the amount of apples and [tex]b[/tex] equal the amount of bananas.
[tex]2a=6b\\a=3b[/tex]
Answer:
every 2 apples there
are 6 bananas
Step-by-step explanation:
2a=6b
If AB= X and x=4, then the transitive property states
Answer:
AB=4
Step-by-step explanation:
The transitive property states if A=B and B+C than A+C Next substitute
AB=x and x=4 so AB=4
Hope this helps, if it did, please give me brainliest, it helps me a lot. :)
Have a good day!
CAN SOMEONE HELP ME ASAP
A. 5
B. 53‾√53
C. 10
D. 103√3
Answer:
n = 5
Step-by-step explanation:
Since this is a right triangle, we can use trig functions
tan theta = opp/ adj
tan 30 = n/ 5 sqrt(3)
5 sqrt(3) tan 30 = n
5 sqrt(3) * 1/ sqrt(3) = n
5 = n
Consider the following sample information from Population A and Population B. Sample A Sample B n 24 16 s2 32 38 We want to test the hypothesis that the population variances are equal. The test statistic for this problem equals a. .84. b. .67. c. 1.50. d. 1.19.
Answer:
Always the numerator for the statistic needs to be higher than the denominator. And replacing we got:
[tex]F=\frac{s^2_2}{s^2_1}=\frac{38}{32}=1.19[/tex]
And the best option would be:
d. 1.19.
Step-by-step explanation:
Data given and notation
[tex]n_1 = 24 [/tex] represent the sampe size 1
[tex]n_2 =16[/tex] represent the sample size 2
[tex]s^2_1 = 32[/tex] represent the sample variance for 1
[tex]s^2_2 = 38[/tex] represent the sample variance for 2
The statistic for this case is given by:
[tex]F=\frac{s^2_1}{s^2_2}[/tex]
Hypothesis to verify
We want to test if the true deviations are equal, so the system of hypothesis are:
H0: [tex] \sigma^2_1 = \sigma^2_2[/tex]
H1: [tex] \sigma^2_1 \neq \sigma^2_2[/tex]
Always the numerator for the statistic needs to be higher than the denominator. And replacing we got:
[tex]F=\frac{s^2_2}{s^2_1}=\frac{38}{32}=1.19[/tex]
And the best option would be:
d. 1.19.
help asap!! will get branliest.
Answer:
C
Step-by-step explanation:
A reflection is when the original diagram or picture is fliped exactly over the x axis.
HEYA!!
Answer:
Your Answer of the Question is C
if you want to prove it you can do the same thing in real life by drawing a 'W' on a paper and see its reflection on the mirror
HOPE IT MATCHES!!
9. A line passes through (2, –1) and (8, 4). a. Write an equation for the line in point-slope form. b. Rewrite the equation in standard form using integers.
Answer:
Step-by-step explanation:
(4+1)/(8-2)= 5/6
y + 1 = 5/6(x - 2)
y + 1 = 5/6x - 5/3
y + 3/3 = 5/6x - 5/3
y = 5/6x - 8/3
6(y = 5/6x - 8/3)
6y = 5x - 16
-5x + 6y = -16
In a certain online dating service, participants are given a 4-statement survey to determine their compatibility with other participants. Based on the questionnaire, each participant is notified if they are compatible with another participant. Each question is multiple choice with the possible responses of "Agree" or "Disagree," and these are assigned the numbers 1 or −1, respectively. Participant’s responses to the survey are encoded as a vector in R4, where coordinates correspond to their answers to each question. Here are the questions:
The question is incomplete. Here is the complete question.
In a certain online dating service, participants are given a 4-statement survey to determine their compatibility with other participants. Based on the questionnaire, each particpant is notified if they are compatible with another participant. Each question is multiple choice with the possible responses of "Agree" or "Disagree", and these are assigned the numbers 1 or -1, respectively. pArticipnat's responses to the survey are encoded as a vector in R4, where coordinates coreespond to their answers to each question. Here are the questions:
Question #1: I prefer outdoor activities, rather than indoor activities.
Question #2: I prefer going out to eat in restaurants, rahter than cooking at home.
Question #3: I prefer texting, rather than talking on the phone.
Question #4: I prefer living in a small town, rather than in a big city.
Here are the results for the questionaire, with a group of 5 participants:
Question1 Question2 Question3 Question4
participant A 1 1 -1 -1
participant B -1 1 1 1
participant C -1 -1 1 1
participant D 1 -1 -1 -1
participant E 1 -1 1 1
Two participants are considered to be "compatible" with each other if the angle between their compatibility vectors is 60° or less. Participants are considered to be "incompatible" if the angle between their compatibility vectors is 120° or larger. For angles between 60° or 120°, pairs of participants are warned that they "may or may not be compatible".
(a) Which pairs of paricipants are compatible?
(b) Which pairs of participants are incompatible?
(c) How would this method of testing compatibility change if the questionnaire also allowed the answer "Neutral", which would correspond to the number zero in a participant's vector? Would this be better than only
allowing "Agree" or "Disagree"? Could anything go wrong if we allowed "Neutral" as an answer?
Answer: (a) Participants A and D; B and C; C and E.
(b) Participants A and B; A and C; A and E; B and D; C and D;
Step-by-step explanation: Vectors in R4 are vectors in a 4 dimensional space and are determined by 4 numbers.
Vectors form angles between themselves and can be found by the following formula:
cos α = [tex]\frac{A.B}{||A||.||B||}[/tex]
which means that the cosine of the angle between two vectors is equal the dot product of these vectors divided by the product of their magnitude.
For the compatibility test, find the angle between vectors:
1) The vectors magnitude:
Magnitude of a vector is given by:
||x|| = [tex]\sqrt{x_{i}^{2} + x_{j}^{2}}[/tex]
Since all the vectors have value 1, they have the same magnitude:
||A|| = [tex]\sqrt{1^{2} + 1^{2} + (-1)^{2} + (-1)^{2}}[/tex] = 2
||A|| = ||B|| = ||C|| = ||D|| = ||E|| = 2
2) The dot product of vectors:
A·B = 1(-1) + 1(1) + (-1)1 + (-1)1 = -2
cos [tex]\alpha_{1}[/tex] = [tex]\frac{-2}{4}[/tex] = [tex]\frac{-1}{2}[/tex]
The angle that has cosine equal -1/2 is 120°, so incompatible
A·C = 1(-1) + 1(-1) + (-1)1 + (-1)1 = -4
cos [tex]\alpha _{2}[/tex] = -1
Angle = 180° --------> incompatible
A·D = 1(1) + 1(-1) + (-1)(-1) + (-1)(-1) = 2
cos [tex]\alpha _{3}[/tex] = 1/2
Angle = 60° ---------> COMPATIBLE
A·E = 1.1 + 1(-1) + (-1)1 + (-1)1 = -2
cos [tex]\alpha_{4}[/tex] = -1/2
Angle = 120° --------> incompatible
B·C = (-1)(-1) + 1(-1) + 1.1 + 1.1 = 2
cos [tex]\alpha _{5}[/tex] = 1/2
Angle = 60° -------------> COMPATIBLE
B·D = (-1)1 + 1(-1) + 1(-1) + 1(-1) = -4
cos[tex]\alpha_{6}[/tex] = -1
Angle = 180° -----------> incompatible
B·E = (-1)1 + 1(-1) + 1.1 + 1.1 = 0
cos[tex]\alpha _{7}[/tex] = 0
Angle = 90° -------------> may or may not
C·D = (-1)1 + (-1)(-1) + 1(-1) + 1(-1) = -2
cos[tex]\alpha_{8} =[/tex] -1/2
Angle = 120° ---------------> Incompatible
C·E = (-1)1 + (-1)(-1) + 1.1 + 1.1 = 2
cos [tex]\alpha_{9}[/tex] = 1/2
Angle = 60° ---------------> COMPATIBLE
D·E = 1.1 + (-1)(-1) + (-1)1 + (-1)1 = 0
cos [tex]\alpha_{10}[/tex] = 0
Angle = 90° -----------------> may or may not
(c) Adding zero (0) as a component of the vectors would have to change the method of compatibility because, to determine the angle, it is necessary to calculate the magnitude of a vector and if it is a zero vector, the magnitude is zero and there is no division by zero. So, unless the service change the method, adding zero is not a good option.
a.) The perimeter of a rectangular field is 354 m. If the length of the field is 95m, what is its width? b.) The area of a rectangular painting is 8439 cm^2. If the width of the painting is 87cm, what is its length?
Answer:
a) 82
b) 97
Step-by-step explanation:
a) 354 - (95+95)
354 - 190
164
164 ÷ 2 = 82
(82+82+95+95=254)
b) 8439 cm^2 = 87x
8439 cm^2 ÷ 87 = 87x ÷ 87
97 = x
What are the side of triangle PWR
Answer:
PR, PW, RW
Step-by-step explanation:
The sides of a triangle are named by naming the vertices at either end.
Triangle PWR has vertices P, W, R. The sides connecting these are named ...
PW, WR, RP
Any name can have the letters reversed. That is, PR names the same segment that RP does.
NEED UGANT HELP pls help me
An event that is impossible has a probability of 0
An event that is certain to happen has a probability of 1
The probability scales from 0 to 1, referring from no chance to will happen.
Basic factoring. Please help!
Answer:
-1(3 - y)
Step-by-step explanation:
If you factor out a negative 1, you will get the opposite signs you already have, so -1(3 - y). To check, we can simply distribute again:
-3 + y
So our answer is 2nd Choice.
Population of town was 21000 in 1980 and it was 20000 in 1990. Assuming the population is decreasing continuously at a rate proportion to the existing population, estimate the population in 2010.
Answer:
19,000
Step-by-step explanation:
Here, we are to estimate the population in the year 2010
From the question, we can see that within a period of a decade which is 10 years, 1000 was lost
So within the period of another decade, it is possible that another 1000 be lost
The estimated population in the year 2010 is thus 20,000 - 1,000 =
19,000
Translate the following statements into symbolic form using capital letters to representaffirmative English statement.
If Maria Cantwell promotes alternative energy,then if Patty Murray supports wilderness areas, then Dianne Feinstein's advocating gun control implies that Susan Collins does so,too.
Answer:
Step-by-step explanation:
There are two distinct statements but put together, it is:
- If Maria Cantwell (MC) promotes Alternative Energy (AE) and if Patty Murray (PM) supports Wilderness Areas (WA) then Dianne Feinstein (DF) advocating Gun Control (GC), implies that Susan Collins (SC) does so too.
For Susan Collins, she advocates gun control too.
So the symbolic or algebraic representation is:
(SC = DF): (MC ~ AE), (PM ~ WA)
OR
(GC = GC): (MC ~ AE), (PM ~ WA)
Where ":" represents "such that" or "given that"
" ~ " represents "support or promotion of"
It can now be read thus;
Susan Collins has same or equal interest as Dianne Feinstein, given that Maria Cantwell promotes alternative energy and Patty Murray supports Wilderness Areas.