Answers
Answer:
a. more mosquitos more malaria
b. DDT worked to keep malaria numbers down by killing mosquitos
c. silent spring's great PR campaign got it banned and with the help of the EPA it was banned almost worldwide and if it was not banned manufacturing it stopped
d. it will continue to increase and 100s of millions of dead will be stacked even higher from malaria
Explanation: it is a tragedy, not sure if that is what you were given to read but that is the side that is rarely told
the birds all dying was not correct, it is not a cartcinogen, it doesn't poison the ocean
here is an interesting quote that is rather telling about how some with power make their decisions
My own doubts came when DDT was introduced for civilian use. In Guyana, within two years it had almost eliminated malaria, but at the same time the birth rate had doubled. So my chief quarrel with DDT in hindsight is that it has greatly added to the population problem.
– Alexander King, cofounder of the Club of Rome, 1990
Absolutely horrific, he is saying that the problem with DDT is that it saved lives
Related Questions
The correct tool for measuring mass is ...
A. electronic balance.
B. ruler.
C. water displacement.
D. graduated cylinder.
Answers
Answer:
electronic balance
it should be electronic balance
1. Calculate the elevated boiling point of a solution containing 10.0g of sodium chloride
dissolved in 200g of water.
Answers
Answer:
100.44 oC (0.438 oC increase in BP)
Explanation:
Where does the light we see from the moon come from?
Answers
In order for the process to be endothermic, the energy required to break the lattice has to be _______ than the energy released as the ions go into solution.
a. Greater
b. Less
Answers
Explanation:
I honestly believe the answer is greater
If the energy required to break the lattice is less than the energy released as the ions go into solution, then the dissolution of solute is endothermic.
An endothermic reaction is one in which energy is absorbed. This implies that the energy change of the reaction is positive.
Now, if the energy required to break the lattice is less than the energy released as the ions go into solution, then the process is endothermic and energy is absorbed.
Learn more about endothermic reaction: https://brainly.com/question/1301963
Combustibles fosiles ¿Por qué son inflamables los gases naturales?¿Dónde están los gases naturales?¿Cómo podemos sacar el aceite?¿Dónde está el carbón?¿Es el combustible fósil una fuente no renovable? AYUDAA
Answers
Answer:
1) Los gases naturales son inflamables porque el natural contiene metano junto con una pequeña cantidad de otros gases orgánicos, lo que hace que una mezcla de entre 5 y 15% de concentración de gas natural con aire u oxígeno se queme por completo cuando se enciende.
2) El petróleo crudo, que son depósitos de hidrocarburos que se encuentran en depósitos naturales en las formaciones subterráneas de la Tierra, se obtiene perforando un pozo en el yacimiento de petróleo a través del cual se permite que una parte importante del petróleo fluya fuera del yacimiento bajo la presión del yacimiento para recibir procesamiento e instalaciones de almacenamiento en la superficie
3) El carbón se forma cuando se aplica compactación y calor a la turba que proviene de material vegetal muerto enterrado durante un período de varios millones de años.
4) Los combustibles fósiles se consideran una fuente de combustible no renovable porque la velocidad a la que se produce es más rápida que la velocidad a la que se forma.
Una fuente de energía renovable, como la energía eólica, es producida por la naturaleza tan rápido como se consume para generar energía.
Explanation:
Determine the block of the element Iron which has 26 atomic number:
Answers
Answer:
ok
Explanation:
Answer:
Iron
Explanation:
PLEASE HURRY IM TIMED Atoms are made up of electrons, neutrons, and____?
protons
compounds
mixtures
water
Answers
Answer: protons
Explanation:
A. Protons I learned this in class
BCL PART
<
10 of 25
Fill in the coefficients with the correct numbers to create a balanced equation,
Al + _ Brg _M1Brz
0 1,21
2,3,2
4,6,4
34,3
Answers
Answer:
im not sure sorry
Explanation:
Calculate AH for the following reaction.
C2H4(g) + H2(g) → C2H6(g)
(ΔHf° for C2H4(g) = 52.5 kJ/mol; ΔHf° for C2H6(g) = -84.7 kJ/mol)
a. -137.2 kJ
b. -32.2 kJ
c. 32.2 kJ
d. 137.2 kJ
Answers
Answer:
a.-137.2 kJ
Explanation:
If the first example symbol used is addition you can copy the plus and follow it how to solve the next!And also if the negative or positive sign.
We have 548 grams of CaCl2. How many molecules of CaCl2 do we have? (The molar mass of CaCl2 is 110.98 g/mol)
Group of answer choices
2.97 x 10^24 molecules
3.66 x 10^28 molecules
9.1 x 10^22 molecules
4.37 x 10^22 molecules
Answers
Answer:
Try everything
1.42 x 10^24 molecules
1.78 x 10^28 molecules
7.04 x 10^23 molecules
14.2 x 10^24 molecules
Explanation:
Is the following statement true or false:
Cellular respiration only occurs in animal cells.
Question 1 options:
True
False
Answers
Answer:
False
Explanation:
Humans and plans do it as well
Answer:
False
Explanation:
Cellular respiration takes place in the cells of all organisms. It occurs in autotrophs such as plants as well as heterotrophs such as animals.
What is the formula of a compound that has [1 mol Fe], [1 mol Ti], and [3 mol O]
Answers
Answer: [tex]FeTiO_3[/tex]
Explanation:
Molecular formula is the chemical formula which depicts the actual number of atoms of each element present in the compound.
Empirical formula is the simplest chemical formula which depicts the whole number of atoms of each element present in the compound.
The molecular formula for a compound that has [1 mol Fe], [1 mol Ti], and [3 mol O] will be [tex]FeTiO_3[/tex]
How far does a car travel if its traveling 15 m/s for 28 seconds.
Answers
If you want to think logically- u have meters divided by seconds. Your final answer must be meters so to get the seconds to cancel - multiply by seconds ( multiplying will cancel division and vice versa)
pls answer if you do ty so much
Answers
Answer:
c
Explanation:
PLEASE HELP!!!
Which of the analogies best describes a Bohr model of an atom?
A. A Bohr model is like a bowling ball because they are both solid spheres.
B.A Bohr model is like a model of the solar system because they both show orbits around a massive center
C. A Bohr model is like a string of beads because they both contain small parts that are lined up in a row.
D. A Bohr model is like a jigsaw puzzle because they are both made up of small parts that are all joined together.
Answers
Answer:
B is the Bohr model of atom
advantages of solar energy
Answers
reduces electric bills
low maintenance costs
reduced needs for fossil fuels and foreign oils
how do we make our natural resources last for generations to come?
Answers
Answer:
We can use non-plastic water bottles, use reusable ziploc bags, use a felt grocery bag, fill a bucket of water while you are showering then afterwards use it to water plants.
this all can help because it is our reusable and the plastic things can end up in the ocean (ocean/ water is a natural resource).
What does the word photosynthesis mean?
PIC IS BELOW!
Answers
Being able to curl your tongue is a recessive trait (t), while not being able to curl your tongue is a dominant trait (T).
Having curly hair is also a recessive trait (s), while having straight hair is a dominant trait (S).
Parent 1 can curl their tongue (tt) and also has straight hair (Ss). Parent 2 cannot curl their tongue (TT) and has
curly hair (ss). In your notebook, perform a dihybrid cross for these traits. Parent 1: ttSs Parent 2: TTSS
13
What are the Parent 1 gametes? (HINT: FOIL. There will be 4 genotypes)
14
What percent of offspring can curl tongue and have straight hair?
15
What percent of offspring cannot curl tongue and have curly hair?
Answers
The reaction heated up 100 g of water in the beaker from 25 °C to 50.0 °C. The specific heat capacity of water is 4.184 J/g°C. Calculate the amount of heat energy that was released by the reaction.
Answers
Answer:
The amount of heat energy that was released by the reaction is 10,460 J.
Explanation:
Sensible heat is that which a body or an object receives or releases and causes its temperature to increase or decrease without affecting its molecular structure and therefore its state.
In other words, sensible heat is the amount of heat that a body absorbs or releases without any changes in its physical state (phase change). When a body is supplied or absorbed sensible heat, the temperature varies.
The equation that allows calculating heat exchanges is:
Q = c * m * ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case:
c= 4.184 [tex]\frac{J}{g*C}[/tex]m= 100 gΔT= Tfinal - Tinitial= 50 C - 25 C= 25 CReplacing:
Q= 4.184 [tex]\frac{J}{g*C}[/tex] *100 g* 25 C
Solving:
Q=10,460 J
The amount of heat energy that was released by the reaction is 10,460 J.
Can somebody sort these from non-metals to metals?
Sonorous, low melting point, high density, brittle, dull, malleable, basic oxide
Answers
Low melting point- nonmetal
High density- metal
Brittle-metal
Dull-nonmetal
Malleable-metal
Basic oxide-metal
Correct me is I’m wrong :)
How do most diamonds get their color?
Answers
Answer:Most naturally-coloured diamonds are created when trace elements interact with the carbon atoms during the diamond's creation. The presence of chemical elements such as nitrogen, sulphur, and boron can colour diamonds in shades of yellow, green, and blue. ... Trace elements have never been found in pink diamonds.
in other words it depends on the heat of how it is made
What is the result of the following calculation? Record to the correct number of significant figures.
7.830 g x 1.041 = ?
Answers
Answer:
8.15103
g
x
Explanation:
Describe the pattern of the Lewis dot structures of the first 18 elements (include periods and groups/families)?
Answers
Answer:
The Lewis dot structures of elements in the same group are the same (except that the name of the element is shown in the structure) while for elements in the same period it increases by one from left to right.
Explanation:
Lewis dot structures are the structures which represent the valence electrons of an atom. The dots in the structure represent electrons in the valence shell of the atom.
Elements in the periodic table are arranged into groups and periods. The groups are the vertical columns whereas the periods are the horizontal rows. The first 18 elements of the periodic table are Hydrogen(H), Helium (He), Lithium (Li), Beryllium (Be), Boron (B), Carbon (C), Nitrogen (N), Oxygen (O), Fluorine (F), Neon(Ne), Sodium (Na), Magnesium (Mg), Aluminum (Al), Silicon (Si), Phosphorous (P), Sulfur (S), Chlorine (Cl) and Argon (Ar). They are found within Groups IA to VIIIA, as well as from period 1 to 3 in the periodic table. elements in group IA have one valence electron; elements in group IIA has two, IIIA has three, IVA has four, VA has five, VIIA has six, VIIA has seven, while VIIIA has eight valence electrons.
Elements in the same group have the same number of valence electrons while the valence electrons of elements in the same period increase by one from left to right. Therefore, the Lewis dot structures of elements in the same group are the same (except that the name of the element is shown in the structure) while for elements in the same period it increases by one from left to right.
The Lewis dot structure of the first 18 elements is shown in the attachment below.
Which of the following is/are true regarding chemical
nomenclature?
A. All elements in a compound must be included
in the name.
B. Ionic and molecular nomenclature have
different rules.
C. A formula for an ionic compound is written
with the cation first followed by the anion.
D. A chemical formula must always be reduced to
the lowest whole number ratio.
Answers
Answer:
c
Explanation:
i took the quiz
What is true of a Brønsted-Lowry base?
A. A Brønsted-Lowry base accepts H+ ions.
B. A Brønsted-Lowry base donates electrons.
C. A Brønsted-Lowry base donates OHions.
D. A Brønsted-Lowry base accepts OH-ions.
Answers
Answer:
I think the answer is A sorry if I am wrong :c
A Brønsted-Lowry base is a species that accepts H⁺ ions (A).
What is Brønsted-Lowry theory?It is an acid-base theory.
Brønsted-Lowry acid: is a species that donates H⁺.Brønsted-Lowry base: is a species that accepts H⁺.What is true of a Brønsted-Lowry base?
A. A Brønsted-Lowry base accepts H⁺ ions. True.
B. A Brønsted-Lowry base donates electrons. False. This is a Lewis base.
C. A Brønsted-Lowry base donates OH⁻ ions. False. This is an Arrhenius base.
D. A Brønsted-Lowry base accepts OH⁻ ions. False. This is not part of any acid-base theory.
A Brønsted-Lowry base is a species that accepts H⁺ ions (A).
Learn more about Brønsted-Lowry acid and bases here: https://brainly.com/question/7256753
Which of the following is
NOT a part of the digestive
system?
A
Mouth
B Esophagus
C Intestines
D
Kidneys
1137 AM
o search
B
Answers
Answer:
Kidneys
Explanation:
I learned about it :)
Answer:
DkidneysExplanation:
I hope it helps
the spectral classes of four stars are shown in comparison with a Hertzsprung-Russell diagram. Based on the information which star is most like the sun?
Answers
Answer: star 3
Explanation: i did the test
Answer: star 3
Explanation:I did the test
Select the correct answer.
Which substance is most likely to form in a precipitation reaction?
A.
calcium nitrate
B.
copper(I) nitrate
C.
iron(I) chloride
D.
iron(II) sulfide
E.
potassium sulfate
Answers
Answer:
C.
Explanation:
Iron is most likely to form a precipitation reaction.
how many moles are in 11g of carbon dioxide?
Answers
Answer:
0.25 moles
Explanation:
To find number of moles in 11 g of CO2
44 g of CO2 =1 MOLE
1GM of CO2 = 1/44 mole
11 gm of CO2 = 1/44x11
=11/44 mole
= 0.25 mole
HOPE IT HELPS U