Argon gas has a boiling point of -197 °C. Which of the following diagrams best represents the
distribution of argon atoms in a steel sphere at -190 °C?

Answer:

Polarity in chemistry referred to physical properties of compounds related to solubility, melting and boiling properties.

Polarity of black pepper can be seen when black pepper is sprinkled on water. The balck pepper float on water and get displaced if touched.

It means black pepper is non-polar and have no difference in electronegativity between bonded atoms. Black pepper is so light in weight and non-polar, the surface tension of water keep it floating in the water.

Answer:

0.48 dm3  (or 480 cm3)

Explanation:

First find the original no. of moles existing in the sulphuric acid:

no. of moles = volume (in dm3) x concentration

                     = 120/1000 x 10

                     = 1.2 mol

Then let the total volume of the diluted acid be v dm3.

Since

Concentration = no. of moles / volume,

so by substituting the given information,

2 = 1.2 / v

v = 0.6 dm3

Hence, the volume of water required

= 0.6 - 120/1000

= 0.48 dm3  (or 480 cm3)

Considering the definition of dilution, 600 cm³ of water is required to dilute 120 cm³ of 10 [tex]\frac{mol}{dm^{3} }[/tex] sulphuric acid to a concentration of 2 [tex]\frac{mol}{dm^{3} }[/tex].

First of all, you have to know that when it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.

Dilution is the procedure followed to prepare a less concentrated solution from a more concentrated one and consists of reducing the amount of solute per unit volume of solution. This is accomplished simply by adding more solvent to the solution in the same amount of solute.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

In this case, you know:

Replacing in the definition of dilution:

10[tex]\frac{mol}{dm^{3} }[/tex]× 120 cm³= 2 [tex]\frac{mol}{dm^{3} }[/tex]× Vf

Solving:

Vf= (10[tex]\frac{mol}{dm^{3} }[/tex]× 120 cm³) ÷2 [tex]\frac{mol}{dm^{3} }[/tex]

Vf= 600 cm³

In summary, 600 cm³ of water is required to dilute 120 cm³ of 10 [tex]\frac{mol}{dm^{3} }[/tex] sulphuric acid to a concentration of 2 [tex]\frac{mol}{dm^{3} }[/tex].

Learn more about dilution:

Answer:

See explanation below

Explanation:

IUPAC came up with the idea of an unambiguous system of nomenclature for organic compounds. This unambiguous system relates the structure of a compound with its name. Thus, IUPAC has established a worldwide standard for the unambiguous naming of organic compounds. Scientists all over the world can now have a uniform system of nomenclature for compounds in order to facilitate easy communication of scientific information.

The systematic names of the following compounds listed in the question are shown below;

(R)-2- butyl bromide has the systematic name (R)-2-bromobutane

(S)-2-butyl bromide has the systematic name (S)-2-bromobutane

This unified system of nomenclature avoids the confusion created by the use of different trivial names in deferent localities and by various scientific academies. This is a major advantage of the systematic nomenclature.

Answer:

pH = 3.39

Explanation:

The equilibrium in water of ascorbic acid (With its conjugate base) is:

H₂C₆H₆O₆(aq) + H₂O(l) ⇄ HC₆H₆O₆⁻(aq) + H₃O⁺(aq)

Where the acidic dissociation constant is written as:

Ka = 7.9x10⁻⁵ = [HC₆H₆O₆⁻] [H₃O⁺] / [H₂C₆H₆O₆]

H₂O is not taken in the Ka expression because is a pure liquid.

As initial concentration of H₂C₆H₆O₆ is 2.5x10⁻³M, the equilibrium concentration of each species in the equilibrium is:

[H₂C₆H₆O₆] = 2.5x10⁻³M - X

[HC₆H₆O₆⁻] = X

[H₃O⁺] = X

Replacing in the Ka expression:

7.9x10⁻⁵ = [X] [X] / [2.5x10⁻³M - X]

1.975x10⁻⁷ - 7.9x10⁻⁵X = X²

0 = X² + 7.9x10⁻⁵X - 1.975x10⁻⁷

Solving for X:

X = -0.00048566→  False solution, there is no negative concentrations

X = 0.00040666 → Right solution

As [H₃O⁺] = X, [H₃O⁺] = 0.00040666

pH is defined as -log [H₃O⁺];

pH = -log 0.00040666,

Answer:

The base is involved in the rate determining step of an E2 reaction mechanism

Explanation:

Let us get back to the basics. Looking at an E1 reaction, the rate determining step is unimolecular, that is;

Rate = k [Carbocation] since the rate determining step is the formation of a carbonation.

For an E2 reaction however, the reaction is bimolecular hence for the rate determining step we can write;

Rate = k[alkyl halide] [base]

The implication of this is that an excess of either the alkyl halide or base will facilitate an E2 reaction.

Hence, when excess base is used, E2 reaction is favoured since the base is involved in its rate determining step. In an E1 reaction, the base is not involved in the rate determining step hence an excess of the base has no effect on an E1 reaction.

Answer:

The element is strontium and the number of neutrons it have is 51.

Explanation:

Based on the given information, the ionic compound is,  

XCl₂ ⇔ X₂⁺ + 2Cl⁻

X2+ is the ion of the mentioned element

As mentioned in the given question, the number of electrons of the element X is 36 and as seen from the reaction the charge present on the ion is +2. Now the atomic number will be,  

No. of electrons = atomic number - charge

36 = atomic number - 2

Atomic number = 38

Based on the periodic table, the atomic number 38 is for strontium element, and the sign of strontium is Sr. Hence, the element X is Sr.  

Now based on the given information, the mass number of the element is 89. Now the no. of neutrons will be,  

No. of neutrons = mass number - atomic number

= 89 - 38

= 51 neutrons.  

Answer:

7p

Explanation:

principal quantum number is 7

n=7( principle shell)

angular momentum quantum number gives sub shell

l = 1 means it is p orbital

so answer is 7p orbital

Answer:

Option B. 0.136 g

Explanation:

The balanced equation for the reaction is given below:

2AgNO3(aq) + 2NaOH(aq) —> Ag2O(s) + 2NaNO3(aq) + H2O(l)

Next, we shall determine the masses of AgNO3 and NaOH that reacted and the mass of Ag2O produced from the balanced equation. This is illustrated below:

Molar mass of AgNO3 = 108 + 14 + (16x3) = 170g/mol

Mass of AgNO3 from the balanced equation = 2 x 170 = 340g

Molar mass of NaOH = 23 + 16 + 1 = 40g/mol

Mass of NaOH from the balanced equation = 2 x 40 = 80g

Molar mass of Ag2O = (108x2) + 16 = 232g/mol

Mass of Ag2O from the balanced equation = 1 x 232 = 232g

Summary:

From the balanced equation above,

340g of AgNO3 reacted with 80g of NaOH to produce 232g of Ag2O.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

340g of AgNO3 reacted with 80g of NaOH.

Therefore, 0.2g of AgNO3 will react with = (0.2 x 80)/340 = 0.047g of NaOH.

From the calculations made above, only 0.047g out of 0.2g of NaOH given, reacted completely with 0.2g of AgNO3. Therefore, AgNO3 is the limiting reactant and NaOH is the excess reactant.

Now, we can calculate the mass of Ag2O produced from the reaction of 0.2g of AgNO3 and 0.2g of NaOH.

In this case, we shall use the limiting reactant because it will produce the maximum yield of Ag2O as all of it is used up in the reaction.

The limi reactant is AgNO3 and the mass of Ag2O produced can be obtained as follow:

From the balanced equation above,

340g of AgNO3 reacted to produce 232g of Ag2O.

Therefore, 0.2g of AgNO3 will react to produce = (0.2 x 232)/340 = 0.136g of Ag2O.

Therefore, 0.136g of Ag2O was produced from the reaction.

Answer:

3,4,1 and 6,5,2

Explanation:

In the electromagnetic spectrum the arrangement of the waves in increasing frequencies and decreasing wavelengths are as follows;

Radio waves

Microwaves

Infrared waves

Visible light rays

Ultraviolet rays

X-rays

Gamma rays

(a simple mnemonic is RMIVUXG)

rate=0.2*3^1*3^2=0.2*3*9=5.4(mol/L)s so the correct answer is C.

Answer:

550 m/s

Explanation:

The average molecular speed (v) is the speed associated with a group of molecules on average. We can calculate it using the following expression.

[tex]v = \sqrt{\frac{3 \times R \times T}{M} }[/tex]

where,

We can use the info of argon to calculate the temperature for both samples.

[tex]T = \frac{v^{2} \times M}{3 \times R} = \frac{(391m/s)^{2} \times 39.95g/mol}{3 \times 8.314J/k.mol} = 2.45 \times 10^{5} K[/tex]

Now, we can use the same expression to find the average molecular speed in a sample of Ne gas.

[tex]v = \sqrt{\frac{3 \times R \times T}{M} } = \sqrt{\frac{3 \times (8.314J/k.mol) \times 2.45 \times 10^{5}K }{20.18g/mol} } = 550 m/s[/tex]

Answer:

Equilibrium constant Kc = [x]² / [A - x] [B - x]

Explanation:

The equilibrium constant is defined as the ratio of the concentration of the products to that of the reactants at equilibrium

ie Kc = [products] / [reactants].

The balanced equation of the reaction is given as : A + B ⇄ AB

At the beginning of the reaction,

Initial concentration I = A = 1M

                                       B = 1M

                                      AB = 0M

After a period of time and assuming 'x' to be the concentration of product AB formed, the concentrations become

                                         C = reactant A = [A - x] M

                                                 rectant B =   [B - x] M

                                              Product AB =  [x] [x] M

At equilibrium, the concentrations are,

                                            E  = rectant A = [A - x] M

                                                   reactant B = [B - x] M

                                                   product AB = [x]² M

therefore , the equilibrium constant, Kc  = [products]/[reactants]

                                                                   = [x]² / [A - x] [B - x]

Answer:

Option B

Explanation:

Scientific question are answered through experimentation, through testing the theory about the physical world.

Answer: its A

through observing and measuring the physical world

Explanation:

Answer:

[tex]14\\8[/tex]O

Explanation:

The top number always represents the mass number.

The bottom number always represents the atomic number.

The element always goes after the numbers.

If charge is present, that comes after the element.

Answer:

[tex]\large \boxed{9.780 \times 10^{4}\text{ u}}[/tex]

Explanation:

The molecular mass of a monomer unit is:

C₂H₃Cl = 2×12.01 + 3×1.008 + 35.45 = 24.02 + 3.024 + 35.45 = 62.494 u

For 1565 units,

[tex]\text{Molecular mass} = \text{1565 units} \times \dfrac{\text{62.494 u}}{\text{1 unit }} = \mathbf{9.780 \times 10^{4}}\textbf{ u}\\\\\text{The molecular mass of the chain is $\large \boxed{\mathbf{9.780 \times 10^{4}}\textbf{ u}}$}[/tex]

A nonmetal and a nonmetal will make molecular compounds like H2O and CO2

Answer:

A. [OH⁻] = 2.188x10⁻³M

B. pKb = 6.02

Explanation:

When hydrazine is in equilbrium with water, its reaction is:

N₂H₄(aq) + H₂O(l) ⇄ HN₂H₄⁺(aq) + OH⁻(aq)

Where Kb, is defined as the ratio between concentrations in equilibrium of the species, thus:

Kb = [HN₂H₄⁺] [OH⁻] / [N₂H₄]

A. From pH, you can find [OH⁻], thus:

pH = -log [H⁺]

11.34 = -log [H⁺]

4.57x10⁻¹² = [H⁺]

As 1x10⁻¹⁴ = [OH⁻] [H⁺]

1x10⁻¹⁴ / 4.57x10⁻¹² = [OH⁻]

B. Concentrations in equilibrium of the species are:

[N₂H₄] = 5.0M - X

[HN₂H₄⁺] = X

[OH⁻] = X

Where X is reaction coordinate

As [OH⁻] = 2.188x10⁻³M

X = 2.188x10⁻³M

Replacing:

[N₂H₄] = 5.0M - 2.188x10⁻³M = 4.9978M

[HN₂H₄⁺] = 2.188x10⁻³M

[OH⁻] = 2.188x10⁻³M

Replacing in Kb expression:

Kb = [HN₂H₄⁺] [OH⁻] / [N₂H₄]

Kb = [2.188x10⁻³M] [2.188x10⁻³M] / [4.9978M]

Kb = 9.577x10⁻⁷

pKb is defined as -log Kb

pKb = -log 9.577x10⁻⁷

Answer:

Option B. 2096.1 K

Explanation:

Data obtained from the question include the following:

Enthalpy (H) = +1287 kJmol¯¹ = +1287000 Jmol¯¹

Entropy (S) = +614 JK¯¹mol¯¹

Temperature (T) =.?

Entropy is related to enthalphy and temperature by the following equation:

Change in entropy (ΔS) = change in enthalphy (ΔH) / Temperature (T)

ΔS = ΔH / T

With the above formula, we can obtain the temperature at which the reaction will be feasible as follow:

ΔS = ΔH / T

614 = 1287000/ T

Cross multiply

614 x T = 1287000

Divide both side by 614

T = 1287000/614

T = 2096.1 K

Therefore, the temperature at which the reaction will be feasible is 2096.1 K

Answer:

The new solution is 1.4% m/V

Explanation:

The concentration of the new solution, obtained by adding 22.5 mL of distilled water to 2.5 mL of 14 % m/V sugar solution, is 1.4% m/V.

We have 2.5 mL (V₁) of a concentrated solution and add it to 22.5 mL of distilled water. Assuming the volumes are additives, the volume of the new solution (V₂) is:

[tex]2.5 mL + 22.5 mL = 25.0 mL[/tex]

We want to prepare a dilute solution from a concentrated one, whose concentration is 14% m/V (C₁). We can calculate the concentration of the dilute solution (C₂) using the dilution rule.

[tex]C_1 \times V_1 = C_2 \times V_2\\C_2 = \frac{C_1 \times V_1}{V_2} = \frac{14\% m/V \times 2.5 mL}{25.0 mL} = 1.4 \% m/V[/tex]

The concentration of the new solution, obtained by adding 22.5 mL of distilled water to 2.5 mL of 14 % m/V sugar solution, is 1.4% m/V.

You can learn more about dilution here: https://brainly.com/question/13844449

Answer:

A) CH3CH2SH

Explanation:

Dispersion forces are weak attractions found between non-polar and polar molecules. The attractions here can be attributed to the fact that a  non-polar molecule sometimes become polar because the constant motion of its electrons may lead to an uneven charge distribution at an instant. If this happens, the molecule has a temporary dipole. This dipole can induce the neighbouring molecules to be distorted and form dipoles as well. The attractions between these dipoles constitute the Dispersion Forces.

Therefore; the greater the molar mass of a compound or molecule, the higher the Dispersion Force. This implies that the compound or molecule with the highest molar mass have the largest dispersion forces.

Now; for option (A)

CH3CH2SH

The molar mass is :

= (12 + (1 × 3 ) +12 + (1 ×2) + 32+1)

= (12 + 3+ 12 + 2 + 32 + 1)

= 62 g/mol

For option (B)

CH3NH2

The molar mass is:

= (12 + (1 ×  3 ) +14 + (1 ×  2)

= (12 + 3 + 14 + 2)

= 31 g/mol

For option (C)

CH4

The molar mass is :

= 12 + (1 × 4)

= 12 + 4

= 16 g/mol

For option (D)

CH3CH3

The molar mass is :

= 12 + ( 1 × 3 ) + 12 + ( 1 × 3)

= 12 + 3 + 12 + 3

= 30 g/mol

Thus ; option (A) has the highest molar mass, as such the largest dispersion force is A) CH3CH2SH

Answer:

THE MOLAR MASS OF THE UNKNOWN COMPOUND IS 242.02 g/mol.

Explanation:

First:

Calculate the change in freezing point:

          Freezing point of pure benzene = 5.5°C

Change in temperature = 5.5 - 3.06 = 2.44 °C

Second:

Using the formula:

Δt = i Kf m

Let's assume i = 1

Kf = 5.12 °C/m

M = x / 0.250 kg of benzene

Then we can calculate x which is the molarity

Re-arranging the formula, we have:

m = Δt / i Kf

x / 0.250 = 2.44 / 1 * 5.12

x = 2.44 * 0.250 / 5.12

x = 0.61 / 5.12

x = 0.119 M

Since it is well known that molarity is the mass of a substance divided by its molar mass. We can then calculate the molar mass.

Molar mass = Mass / molarity

Molar mass = 28.8 g / 0.119 M

Molar mass =242.02 g/mol

Hence, the molar mass of the unknown molecular compound is 242.02 g/mol.

Answer:

WHEN 63.7 g OF K2SO4 IS DISSOLVED IN WATER, 0.73 MOLES OF POTASSIUM ION AND 0.366 MOLES OF SULFATE ION ARE FORMED.

Explanation:

Equation for the reaction:

K2SO4 + H20 ------->2 K+ + SO4^2-

When K2SO4 dissolves in water, potassium ion and sulfate ion are formed.

1 mole of K2SO4 produces 2 moles and 1 mole of SO4^2-

At STP, 1 mole of K2SO4 will be the molar mass of the substance

Molar mass of K2SO4 = ( 39 *2 + 32 + 16*4) g/mol

Molar mass = 174 g/mol

So therefore;

1 mole of K2SO4 contains 174 g and it produces 2 moles of potassium and 1 mole of sulfate ion

When 63.7 g is used; we have:

174 g = 2 moles of K+

63.7 g = ( 63.7 * 2 / 174) moles of K+

= 0.73 moles of K+

Forr sulfate ion, we have:

174 g = 1 mole ofSO4^2-

63.7 g = (63.7 * 1 / 174) moles of SO4^2-

= 0.366 moles of SO4^2-

In other words, when 63.7 g of K2SO4 is dissolved in water, 0.73 moles of potassium ion and 0.366 moles of sulfate ion are formed.

Answer:

B. Reactant + Reactant -> Product + Product

Explanation:

Reactants are substances that- as the name suggests- reacts with other substances at the beginning of a reaction

Products are substances that are produced as a result of the reaction

Typically, when writing a chemical reaction, an arrow is used to show the direction the reaction is moving.  In this case, the arrows in options B and C suggest that the reaction only moves in one direction- forwards

And as mentioned above, reactants are the substances at the start of the reaction, they're what mixes together to form a new product.  

To keep things simple:

Products can't be at the beginning of a reaction since they weren't formed yet.

Similarly, reactants can't be part of the products since they already existed and didn't need to be made. In a lot cases, the reactants would be completely used up to make the products

As such, only one possible chemical reaction would follow that reasoning:

    Reactant + Reactant ->  Product + Product

Reactant + Reactant → Product + Product is the correctly written chemical reaction. Hence, option B is correct.

A chemical equation is a mathematical expression of the chemical reaction which represents the product formation from the reactants.

In an equation, the reactants are written on the left-hand side and the products are written on the right-hand side demonstrated by one-headed or two-headed arrows.

Hence, option B is correct.

Learn more about the chemical equation here:

https://brainly.com/question/12363199

#SPJ2

Answer:

1 mole of CaC₂ will produce 26g of C₂H₂ or 64.1g of CaC₂ will produce 26g of C₂H₂

Explanation:

Hello,

To solve this question, we'll require a balanced chemical equation of reaction between calcium carbide and water.

Equation of reaction

CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂

Molar mass of calcium carbide (CaC₂) = 64.1g/mol

Molar mass of water (H₂O) = 18g/mol

Molar mass of calcium hydroxide (Ca(OH)₂) = 74g/mol

Molar mass of ethyne (C₂H₂) = 26g/mol

From the equation of reaction, 1 mole of CaC₂ will produce 1 mole of C₂H₂

1 mole of CaC₂ = mass / molar mass

Mass = 1 × 64.1

Mass = 64.1g

1 mole of C₂H₂ = mass / molar mass

Mass = 1 × 26

Mass = 26g

Therefore, 1 mole of CaC₂ will produce 26g of C₂H₂

Note: this is a hypothetical calculation since we were not given the initial mass of CaC₂ that starts the reaction

Answer:

2.17x10⁻¹⁰ = Kb1

1.69x10⁻¹³ = Kb2

Explanation:

Oxalic acid, C₂O₄H₂, has two intercambiable protons, its equilibriums are:

C₂O₄H₂ ⇄ C₂O₄H⁻ + H⁺ Ka1 = 5.9x10⁻²

C₂O₄H⁻ ⇄ C₂O₄²⁻ + H⁺ Ka2 = 4.6x10⁻⁵

Oxalate ion, C₂O₄²⁻, has as equilibriums:

C₂O₄²⁻ + H₂O ⇄ C₂O₄H⁻ + OH⁻ Kb1

C₂O₄H⁻ + H₂O ⇄ C₂O₄H₂ + OH⁻ Kb2

Also, you can know: KaₓKb = Kw

Where Kw is 1x10⁻¹⁴

Thus:

Kw = Kb2ₓKa1

1x10⁻¹⁴ =Kb2ₓ4.6x10⁻⁵

And:

Kw = Kb1ₓKa2

1x10⁻¹⁴ =Kb1ₓ5.9x10⁻²

That is because the inverse reaction of, for example, Ka1:

C₂O₄H⁻ + H⁺ ⇄ C₂O₄H₂ K = 1 / Ka1

+ H₂O ⇄ H⁺ + OH⁻ K = Kw = 1x10⁻¹⁴

=

C₂O₄H⁻ + H₂O ⇄ C₂O₄H₂ + OH⁻ Kb2 = Kw × 1/Ka1

Answer: The amount of sample left after 8323 years is 4.32g

Explanation:

Expression for rate law for first order kinetics is given by:

[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]

where,

k = rate constant

t = age of sample

a = let initial amount of the reactant

a - x = amount left after decay process  

a) for completion of half life:

Half life is the amount of time taken by a radioactive material to decay to half of its original value.

[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]

[tex]k=\frac{0.693}{8694years}=7.97\times 10^{-5}years^{-1}[/tex]

b) amount left after 8323 years

[tex]t=\frac{2.303}{7.97\times 10^{-5}}\log\frac{8.30g}{a-x}[/tex]

[tex]8323=\frac{2.303}{7.97\times 10^{-5}}\log\frac{8.30g}{a-x}[/tex]

[tex]0.285=\log\frac{8.30}{a-x}[/tex]

[tex]\frac{8.30}{a-x}=1.92[/tex]

[tex](a-x)=4.32g[/tex]

The amount of sample left after 8323 years is 4.32g

Answer:

B. Valence Electron Pairs

Explanation:

Valence-shell electron-pair repulsion, or VSEPR, describes the shape of molecules by determining the repulsion of valence electrons. Therefore, our answer is B.

Answer:

Option E. 2.04 L

Explanation:

Data obtained from the question include:

Molarity of NaCl = 2.25 M

Mole of NaCl = 4.58 moles

Volume =..?

Molarity is simply defined as the mole of solute per unit litre of the solution. It is represented mathematically as:

Molarity = mole /Volume

With the above formula, we can obtain the volume of the solution as follow:

Molarity = mole /Volume

2.25 = 4.58/volume

Cross multiply

2.25 x volume = 4.58

Divide both side by 2.25

Volume = 4.58/2.25

Volume = 2.04 L

Therefore, the volume of the solution is 2.04 L