aqueous solutions of the following reactants are mixed. after the reaction goes to completion, calculate the concentration (in mol/l) of silver ions in solution. 167.7 ml of 3.50 m agno3 are mixed with 150.0 ml of 1.50 m cacl2 do not include units in your answer. if you round during your calculation, be sure to keep at least three (3) decimal places. report your answer to two (2) decimal places.

Answers

Answer 1

Concentration of sliver ions in the solution= 175.3ml*1L/10³*3.50/1L

Concentration of sliver ions in the solution= 0.6135

1) Percent concentration: This is the quantity of solute that dissolves in 100 g of solvent. If a solution's concentration is 20%, we know that there are 20 g of solute in every 100 g of solution. As an illustration, a solution is made by mixing 10 g of salt and 70 g of water. by % mass, determine the solution's concentration.

The Latin argentum and Sanskrit argunas, both meaning "bright," are where the word "Ag" originates. Even in the Stone Age, silver was used. Silver use dates back at least 5000 years, according to archeological findings.

Learn more about silver here:

https://brainly.com/question/6434391

#SPJ4


Related Questions

identify the oxidized substance, the reduced substance, the oxidizing agent, and the reducing agent in the redox reaction. cu(s) 2agno3(aq)⟶2ag(s) cu(no3)2(aq) which substance gets oxidized? ag ag no−3 cu2 cu which substance gets reduced? ag no−3 cu2 cu ag what is the oxidizing agent? no−3 cu ag ag cu2 what is the reducing agent? no−3 cu2 ag cu ag

Answers

The given redox reaction,  Cu(s)+2AgNO3(aq)⟶2Ag(s)+Cu(NO3)2(aq).

The substance gets oxidized = Cu The substance gets reduced = Ag + The oxidizing agent  =  Ag + The reducing a cu Ag

Reason:

Redox is a type of chemical reaction in which the oxidation states of the substrate change. Oxidation is the loss of electrons or an increase in the oxidation state, while reduction is the gain of electrons or a decrease in the oxidation state.

Learn more about Redox Reaction:

https://brainly.com/question/13293425

#SPJ4

complete the following: ( note: formulas should be entered like the following example: potassium sulfate - k2so4 , another example: zinc nitrate - zn(no3)2 ) compound ionic or covalent formula sodium oxide covalent so iron(iii) bromide ionic febr3 sodium carbonate ionic na2co3 carbon tetrachloride covalent ccl4 nitrogen tribromide covalent nbr3

Answers

Compound              Ionic or Covalent                  Formula

sodium oxide          Ionic                                     Na2O                                      

iron(III) bromide        Ionic                                    FeBr3                                  

sodium carbonate       Ionic                                 Na2CO3                                  

carbon tetrachloride     covalent                         CCl4                                  

nitrogen tribromide      covalent                            NBr3

Ionic bonds, which occur when two negatively charged ions join forces with positively charged ones, are formed when one atom transfers electrons to the other. Ionic bonds may be seen in the chemical compound sodium chloride.

A: The oxygen molecule is held together by two covalent bonds because the two oxygen atoms share two pairs of electrons. Two atoms, in this case oxygen and hydrogen, share electrons to form covalent bonds. Each end of the V-shaped H2O molecule assumes a slightly different charge as a result of the uneven attraction of oxygen and hydrogen to the shared electrons.

Learn more about covalent here:

https://brainly.com/question/14470991

#SPJ4

A pitching machine is used to pitch two balls. The speed of both balls is 94 km/hr. The mass of one ball is 5 grams, and the mass of the other ball is 50 grams. Since both balls are traveling at the same speed, which of the following is true? Responses The 5-gram ball has more kinetic energy than the 50-gram ball. The 5-gram ball has more kinetic energy than the 50-gram ball. The balls have the same kinetic energy.

A) The balls have the same kinetic energy.

B) The 50-gram ball has more kinetic energy than the 5-gram ball.


C)The 50-gram ball has more kinetic energy than the 5-gram ball.

D) Neither ball has any kinetic energy.

Answers

Answer: b

Explanation:

if a bottle of nail polish remover contains 179 ml of acetone, how much heat would be released by its complete combustion? the density of acetone is 0.788 g/ml .

Answers

If a bottle of nail polish remover contains 179 ml of acetone, −4349.7kJ. heat would be released by its complete combustion.

Given Data:

The volume of acetone is 179 mL.

The density of acetone is 0.788 g/mL.

Below is a diagram illustrating how acetone burns.

CH3COCH3 + 4O2 = 3CO2 + 3H2O

The heat released during the given reaction is -1790 kJ/mol. The negative sign represents the release of energy.

The formula to calculate mass from density and volume is shown below.

Mass= Density × Volume

Substitute the values of density and volume of acetone in the above formula.

Mass=0.788g/mol× 179mL=141.052g

The formula to calculate number of moles is as follows.

Number of moles=Mass/ Molarmass

Acetone has a 58.08 g/mol molar mass.

Substitute the values of mass and molar mass of acetone in the above formula.

Number of moles= 141.052g/(58.08g/mol)=2.43mol

The heat that is released from combustion of one mole of acetone is -1790 kJ/mol.

So, the heat that would be released from combustion of 2.43 mole of acetone is

(−1790kJ/mol×2.43mol) that is -4349.7 kJ.

Therefore, the heat that is released by combustion of 179 mL of acetone is

−4349.7kJ.

learn more about acetone here:

https://brainly.com/question/13334667

#SPJ4

two coordination compounds that have the same ligands arranged differently in space around the central metal ion, but are not mirror images of one another, are called

Answers

Geometric isomers are coordination compounds that have two or more of the same atom kinds, numbers, and bond types.

Geometric isomers are two coordination compounds with identical ligands that are not mirror images of one another but are positioned differently in space around the central metal ion. Trans isomers have identical ligands across from each other, whereas isomers with identical ligands adjacent to each other are referred to as cis isomers.

The only compounds with geometric isomerism are square planar and octahedral. Tetrahedral compounds do not exhibit geometric isomerism since each Ligand is positioned in the same way around the centre metal atom or ion in space. ​

Hence, coordinating substances known as geometric isomers include two or more of the same atom types, numbers, and bond types. ​

To know more about Coordination compound.

https://brainly.com/question/27289242

#SPJ4

Nuclear decay occurs according to first-order kinetics. What is the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes?.

Answers

The kinetics of first order governs nuclear decay. In the event that a sample degrades from 55.4 g - 31.7 g after 3.09 minutes, what is the polonium-218 half-life?

What is the purpose of polonium?

Polonium is employed in research and antistatic devices because it is an alpha-emitter. It serves as a dominant male source there in form of a small layer on a steel disc. Eliminating static electricity from processes like rolling wire, paper, and sheet metal.

What polonium mass number is 218?

For information pertaining to the periodic table chemical element polonium, please visit its element page. The chemical element of polonium is called polonium-218, and it has a half-life of 3.10 minutes and a relative atomic mass of 218.008966.

To know more about polonium visit:

https://brainly.com/question/555482

#SPJ4

The following scientists made significant contributions to our understanding of the structure and function of DNA. Place the scientists' names in the correct chronological order, starting with the first scientist(s) to make a contribution.
I. Avery, McCarty, and MacLeod
II. Griffith
III. Hershey and Chase
IV. Meselson and Stahl
V. Watson and Crick

Answers

The correct order of the scientists who made significant contributions to our understanding of the structure and function of DNA is II, I , III, V, IV.

In molecular biology, DNA is describes as the most important component that carries genetic information.

In DNA, the particular information is stored which is processed to manufacture large macro-molecules such as proteins.

The genetic information and instructions are stored in large structures called chromosomes which are found in each cell.

Great number of short fragments of DNA join together to form chromosomes which play their role in mutation, replication, gene expressing and encoding of information.

Simply put, detailed 3D-model of DNA was suggested by Crick and Watson in 1993 which shows that DNA  is a double helix structure made up of nucleotide chains and nitrogenous bases.

If you need to learn more about DNA click here:

https://brainly.com/question/2131506

#SPJ4

solid ammonium chloride, nh4cl, is formed by the reaction of gaseous ammonia, nh3, and hydrogen chloride, hcl. nh3(g) hcl(g)⟶nh4cl(s) a 4.98 g sample of nh3 gas and a 4.98 g sample of hcl gas are mixed in a 0.50 l flask at 25 ∘c. identify the limiting reagent. nh3 hcl nh4cl how many grams of nh4cl will be formed by this reaction? mass: g what is the pressure in atmospheres of the gas remaining in the flask? ignore the volume of solid nh4cl produced by the reaction.

Answers

The limiting reagent in this reaction is the hydrogen chloride (HCl).

What is reagent?
A reagent, also known as an analytical reagent, is a substance as well as compound that is added to a system in chemistry to bring about a chemical reaction or check to see if one occurs. Although the terms "reagent" and "reactant" are frequently used interchangeably, "reactant" refers to a substance that is consumed during a chemical reaction. Despite being a part of the reaction mechanism, solvents are not typically referred to as reactants. Catalysts are not reactants because they are not consumed by the reaction. The reactants in biochemistry are frequently referred to as substrates, particularly in relation to enzyme-catalyzed reactions.

The limiting reagent in this reaction is the hydrogen chloride (HCl). This is because it requires more moles of HCl than ammonia to produce ammonium chloride (NH4Cl). The number of moles of HCl is 0.0998, while the number of moles of ammonia is 0.0498, so HCl is the limiting reagent.

The amount of NH4Cl that will be formed will be 4.98 g, since this is the amount of the limiting reagent, HCl.

The pressure of the gas remaining in the flask will be unchanged, since no gas is consumed in the reaction, only solids. Therefore, the pressure will remain at 0.50 atmospheres.

To learn more about reagent
https://brainly.com/question/6959208
#SPJ4

questions: will the arsenic in well b-1 likely contaminate the water in clearwater lake? why or why not? in which direction is the contaminated water in well b-1 moving? which well will most likely show contamination of arsenic next?

Answers

Water desk elevation is the upper or below surface of the groundwater, when the soil or underlying rock material is wholly saturated with water. The water table can be contamination of ground water by hazarodus wastes, fertilisers, pesticides, acid rain etc

How can a element contaminate water table?

The water desk elevation of the Clearwater lake isn't always given. Assuming, the water desk elevation of B1 is 171ft. We recognize the idea that water flows from higher elevation to lower elevation. So the wells having elevation much less than 171 feet gets infected via way of means of B1 contaminants, however the ones are having better elevation that 171ft will no longer get infected.

And approximately the route of infected water, the infected water will float closer to the course in  the Wells of decrease elevation than 171ft.

To know more about water table, click on https://brainly.com/question/23060360

#SPJ4

in a titration experiment, h2o2(aq) reacts with aqueous mno4-(aq) as represented by the equation above. the dark purple kmno4 solution is added from a buret to a colorless, acidified solution of h2o2(aq) in an erlenmeyer flask. (note: at the end point of the titration, the solution is a pale pink color.) at a certain time during the titration, the rate of appearance of o2(g) was 1.0 x 10-3 mol/(l⋅s). what was the rate of disappearance of mno4- at the same time?

Answers

MnO4 is disappearance at a rate of 4.0 x 10-4 mol/L at the same period.

An experiment involving titration requires what?

You will need a calibrated burette, a burette stand, numerous beakers or Erlenmeyer flasks, a measured amount of your analyte, and a significant amount of your titrant to perform a titration. Start by adding a little amount of color indicator to the analyte in your beaker.

What is a titration experiment's conclusion?

With the use of an indicator, the 'end point' of the titration is found when the color of the solution changes as a result of neutralization. It is feasible to link the concentration of the acid to the concentration of the base by calculating the volume of titrant necessary to achieve the "end point."

40 cm^3 diluted to 250 cm^3 means the dilution ratio of 250/40 = 6.25 times. Hence, the NaOH concentration is reduced by 1/6.25 = 0.16 times.

20 cm^3 is 0.02 dm^3.

That much of 0.05 M sulfuric acid contains 0.02 * 0.05 = 0.001 moles of H2SO4.

It reacts with NaOH at 1:2 molar ratio, which means 0.002 moles of NaOH were titrated.

That amount is found in 25 cm^3 = 0.025 dm^3 of the diluted solution, which yields its concentration to be 0.002 / 0.025 = 0.08 M.

Multiplying that result by dilution ratio gives 6.25 * 0.08 M = 0.5 M as the original concentration.

Learn more about titration here:

https://brainly.com/question/2728613

#SPJ4

Which of the following is a paleoclimate proxy? O A Written temperature records from the summer of 1863 OB Measurements of fossilized tree rings from the Cretaceous period O c A database of satellite temperature data, from 1970 through present © D All of the above

Answers

Measurements of fossilized tree rings from the Cretaceous period is a paleoclimate proxy. -database of satellite temperature data,

An animal or plant from a previous geologic era that has been preserved in the Earth's crust as a fossil, remnant, impression, or trace. The main repository for knowledge regarding the evolution of life on Earth is the complex of information preserved in fossils found all across the world.

fossils of dinosaurs discovered in Alberta, Canada. Only a small percentage of extinct species have been preserved as fossils, and often only those with a sturdy skeleton are capable of doing so. A calcareous skeleton or shell is present in the majority of major groups of invertebrate creatures (e.g., corals, mollusks, brachiopods, bryozoans). Other types have silicon dioxide or calcium phosphate shells (both of which are found in the bones of vertebrates).

To know more about  fossils visit : https://brainly.com/question/6867325

#SPJ4

What is the empirical formula of a compound that contains 29% na, 41% s, and 30% o by mass?

Answers

Na2so3 is the empirical formula for a compound that, by mass, contains 29% NA, 41% S, and 30%.

What is empirical formula of a compound?

The empirical formula of a chemical compound in chemistry is the simplest whole number ratio of atoms in a compound. Two simple examples of this concept are the empirical formulas of sulfur monoxide, SO, and disulfur dioxide, S2O2. An empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms. This would be the compound's element with the lowest whole number ratio.

How can you determine a compound's empirical formula?

1. To solve an empirical formula problem, you must first determine the mass percentage of the constituent constituents.

2. Next, convert the percentage to grams.

3. Subtract each mass from its corresponding molar mass.

4. Select the moles answer that is the smallest and divide all numbers by that.

Briefing:

1. Change every percentage to grams.

29% Na = 0.29g

41% S = 0.41 g S

30% O = 0.30 g O

2. Change every amount to moles.

0.29 g Na = 0.01261… moles Na

0.41 g S = 0.01278… moles S

0.30 g O = 0.01875 moles O

3. Divide each mole by the smallest one, then roughly

0.01261 mol Na /0.01261 approximately 1

0.001278 mol S/0.01261 approximately 1(rounded from 1.01348…)

0.01875 mol O/0.01261 approximately 1.5(rounded from 1.486915

4. Since one of the elements was rounded to a non-whole integer, we must multiply each element by 2 to obtain whole numbers.

Na: 1 * 2 = 2

S: 1 * 2 = 2

O: 1.5 * 2 = 3

5. Based on the numbers above, create the equation using subscripts for each element.

6. sodium thiosulfate (Na2S2O3)

To know more  about Empirical Formula of a compound visit:

https://brainly.com/question/1363167

#SPJ4

why is potassium dihydrogen arsenate a duller color than potassium nitrate? potassium dihydrogen arsenate has a more stable excited state, so the emitted light is dimmer. potassium dihydrogen arsenate is heavier, so it does not excite as intensely. potassium dihydrogen arsenate also contains arsenic, which is a dull blue color. potassium dihydrogen arsenate is often contaminated with sodium, which dulls the color of light emitted.

Answers

Potassium dihydrogen arsenate has a more stable excited state than potassium nitrate, so the emitted light is dimmer.

Potassium nitrate (KNO3) is an ionic white crystalline salt made up of potassium ions and nitrate ions. It is also known as saltpeter or nitre. Manufacturing fertilizers, pesticides, glass, fireworks, explosives, and rocket fuel are among the uses of potassium nitrate. When added to meat, it triggers a reaction between the myoglobin and hemoglobin in the blood, giving the meat its red color. It is also used as a food preservative. Additionally, some toothpastes use it as an additive to lessen tooth sensitivity. When it comes to human consumption, potassium nitrate use is strictly regulated because it is toxic at high doses.

To know more about  potassium nitrate visit : https://brainly.com/question/15080595

#SPJ4

Calculate the volume of 1. 0 x 10-4 m cv+ solution that needs to be added to a 25. 0 ml volumetric flask and diluted with deionized (di) water in order to prepare a calibration standard solution with a concentration of 1. 0 x 10-5 m cv+. As part of your preparation for performing this experiment, repeat this calculation for each of the calibration standards you would need to prepare in part i a of the experiment and record the information in your notes so that you have it ready during the lab session. Also calculate the volume of 1. 0 x 10-4 m cv+ solution required to prepare 10 ml of 3. 0 x 10-5 m cv+ solution to be used in part ii b of the experiment and record the information in your notes.

Answers

2.5 ml and 3 ml of solution, respectively, are needed to make the final concentration of.

What is calibration standard solution?

Standard addition, internal standard, and external standard techniques to quantitation all employ calibration solutions. Calibrants can be made gravimetrically using reference standards or pure reference materials, but they can also be made on a volumetric or other fraction basis.

How do you prepare a calibration solution?

Calculate the volume of stock solution needed for each calibration standard by deciding on its number (minimum 5) and concentration. As often as necessary, repeat the treatment. Select and create the dilution solution (such as a matrix solution or 1% acid, for example). Both the working curve method and the standard addition method can be used to calibrate an instrument.

Briefing:

Calibration standard solution is the solution prepared of the known concentration for the plotting of standard curve.

For preparing the solution of known concentration and volume, the equation imputed is :

M1V1=M2V2

Where M1 and V1 are molarity and volume of known solution

M2 and V2 are molarity and volume of solution to be prepared.

Given, volume to be prepared V2 : 25 ml

concentration to be prepared : M_2:1×〖10〗^(-5) M

concentration of given solution : M_1:1×〖10〗^(-4) M

1×〖10〗^(-4)×V_1=1×〖10〗^(-5)×25

Volume of solution required is 2.5 ml.

The volume required to prepare 10 ml solution of 3×10-5 M is:

1×10-4×V1=3×10-5×10

Volume = 3 ml.

To know more about Calibration Standard Solution visit: https://brainly.com/question/17924315

#SPJ4

the formation of the crystalline nacl lattice from sodium blank and chloride blank is highly exothermic and more than compensates for the blank electron transfer process. since the sodium ions are blank charged and the chlorine ions are blank charged, the potential energy blank, as described by blank law, when these ions come together to form a lattice. that energy is blank as heat when the lattice forms. g

Answers

The formation of the crystalline NaCl lattice from sodium cations and chloride anions is highly exothermic and more than compensates for the endothermicity of the electron transfer process. In other words, the formation of ionic compounds isn't exothermic because sodium wants to lose electrons and chlorine wants to gain them; rather, it's exothermic because of the large amount of heat released when sodium and chlorine ions coalesce to form a crystal lattice.

To conduct nerve impulses, contract and relax muscles, and maintain the right ratio of water and minerals, the human body needs a modest quantity of sodium. For these essential processes, it is estimated that humans require 500 mg of sodium salt every day.

A nose, throat, and eyes might get irritated when exposed to low amounts of chlorine. At greater concentrations, breathing chlorine gas may alter respiratory patterns, cause coughing, and harm the lungs. Chlorine exposure might cause serious additional symptoms. Chlorine exposure may be harmful to workers.

Learn more about chlorine here:

https://brainly.com/question/14962130

#SPJ4

name the ions formed by these elements and classify them as anions or cations. a) selenium b) barium c) phosphorus

Answers

The selenium ion is represented as Se4+, Barium ion is represented as Ba2+ and Phosphorus occurs as phosphate ion i.e., PO43-.

The chemical species that contains a positive charge is known as cation while the chemical species consisting of a negative ion is known as anion.

Selenium is a metal, therefore is exist as a cation with Se4+ representation having +4 charge. Barium is a metal, thus it exist as a cation with Ba2+ representation having +2 charge while phosphorus always occurs as a phosphate ion i.e., PO43- which is an anion as phosphorus is a non-metal.

Therefore, the representation of  the ions are given above.

To learn more about ions check the link below:

https://brainly.com/question/13692734

#SPJ4

Cameron used ounces of hydrochloric acid in one experiment. She used ounces of the acid in a second experiment. How much more acid did cameron use in the second experiment?.

Answers

Cameron used ounces of hydrochloric acid in one experiment. She used ounces of the acid in a second experiment. In second experiment, She used 2 ounces of the acid

Amount required is x = 3/8 Given: Cameron used 1 ounces of hydrochloric acid in one experiment. She used 2 ounces of the acid in a second experiment.

To find: How much more acid did Cameron use in the second experiment?

Solution:In one experiment, Cameron used 1 ounces of hydrochloric acid i.e 13 = 1

In second experiment, She used 2 ounces of the acid. i.e. 21 = 1 17 Let x amount more she used then experiment 1 in experiment 2.

Learn more about hydrochloric acid here:

https://brainly.com/question/15231576

#SPJ4

5 g of gold and 25 g of silver are mixed to form a single-phase ideal solid solution. (a) how many moles of solution are there? (b) what are the mole fractions of gold and silver?

Answers

Mole fraction for silver= 0.2317643/0.3079193

                                     = 0.7526787

Mole fraction for gold=0.076155/0.3079193

                                    =0.2473212

What is Molar Fraction?

The mole fraction is the product of the number of molecules of a specific component in a mixture and its total molecular weight. It serves as a means of indicating how concentrated a solution is.

It is a unit of concentration, defined as the product of the moles of a component and the moles of the entire solution. When all the parts of a solution are summed up, their mole fraction equals 1.

molar mass of silver = 107.8682g/mol

Molar mass of gold= 196.96657g/mol

Therefore mole = mass/molar mass

For silver: 25g/107.8682g/mol = 0.2317643mol

For gold: 15g/196.96657g/mol= 0.076155mol

Total number of mole= 0.2317643+0.076155

                                    = 0.30791193mol

Mole fraction for silver= 0.2317643/0.3079193

                                      = 0.7526787

Mole fraction for gold=0.076155/0.3079193

                                     =0.2473212

Learn more about Mole Fraction from given link

https://brainly.com/question/28590918

#SPJ4

draw the lewis structure for the polyatomic phosphite anion. be sure to include all resonance structures that satisfy the octet rule.

Answers

The structure of the phosphite anion is a "T" shaped structure as it contains three oxygen atoms one with double bond with the phosphate atom.

Anion is a negatively charged ion that attracts the anode in electrolyte solution. The phosphite anion contains three oxygen atoms with one of them having double bond with the phosphate atom.

   According to Lewis structure the phosphite anion would be a "T" shaped structure. As we know, Lewis structure gives us the idea of how many electrons are donated or shared in order to form a covalent bond.

    Lewis structures, also known as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures, are diagrams that show the bonding between atoms of a molecule, as well as the lone pairs of electrons that may exist in the molecule.

Learn more about anion and cation at,

https://brainly.com/question/4838994

#SPJ4

what is the molar mass of a 4.80 g sample of gas exerting 0.800 atm of pressure at 295 k in a 7.00 l container?

Answers

The molar mass of a 4.80 g sample of gas exerting 0.800 atm of pressure at 295 k in a 7.00 l container is 253.969g/mol.

It is given that the mass of the sample is 4.8g and it exerts a pressure of 0.8atm at 295K in a 7L container. According to the ideal gas law,

PV =nRT

By rearranging this formula we get,

n = PV/RT

On plugging the values of P, V, R and T we get

n = 0.8x7/295

n = 5.6/295

n = 0.0189 moles

The moles of the gas are 0.0189. The molar mass can be computed by,

Molar mass = mass of the gas/moles of the gas

Molar mass = 4.8/0.0189

Molar mass = 253.968g/mol

Therefore, the molar mass of the gas is 253.969g/mol

To know more about gas constant, click below:

https://brainly.com/question/14279790

#SPJ4

a solution contains one or more of the following ions: ag ag , ca2 ca2 , and cu2 cu2 . when you add sodium chloride to the solution, no precipitate forms. when you add sodium sulfate to the solution, a white precipitate forms. you filter off the precipitate and add sodium carbonate to the remaining solution, producing another precipitate.

Answers

SO₄⁻² (aq) + Ca⁺₂(aq) → CaSO₄(s)

CO₃⁻²(aq) + Cu⁺²(aq) → CuCO₃(s).

when you add sodium chloride to the solution, no precipitate forms. when you add sodium sulfate to the solution, a white precipitate forms. you filter off the precipitate and add sodium carbonate to the remaining solution, producing another precipitate.

When sodium chloride (NaCl) is added to the solution, sodium chloride  dissociates and forms the ions Na+ and Cl-. The anion can be form salts with the other cations presented in the solution. According to the solubility table of the salts, AgCl is a nonsoluble salt, and so, it was expected to form a precipitate. Perhaps, the concentration was not higher enough to do this.

When sodium sulfate (Na2SO4) is added, sodium sulfate dissociates and forms Na+ and SO₄⁻², the sulfate ion can react with the other cations. According to the solubility table, the salt CaSO4 (Ca is from group 2) is nonsoluble, so it will be formed. The net ionic equation represents the ions in solution that reacts:

Na⁺(aq) + SO₄⁻² (aq) + Ca⁺₂(aq) → Na⁺(aq) + CaSO₄(s)

SO₄⁻² (aq) + Ca⁺₂(aq) → CaSO₄(s)

When sodium carbonate (Na2CO3) is added, it dissociates and forms Na+ and CO₃⁻². According to the solubility table, the salt CuCO₃ is nonsoluble and will form a precipitate:

Na⁺(aq) + CO₃⁻²(aq) + Cu⁺²(aq) → Na⁺(aq) + CuCO₃(s)

CO₃⁻²(aq) + Cu⁺²(aq) → CuCO₃(s)

Learn more about sodium sulfate   here:

https://brainly.com/question/4025301

#SPJ4

a chemist measures the amount of mercury in sediment samples from three areas of a river (the source, the midway point, and the mouth). which is the most reasonable hypothesis for the chemist's experiment?

Answers

A chemist counts the quantity of mercury present in sediment samples collected from three different riverbanks (the source, the midway point, and the mouth).

Who is known as a chemist?

A scientist who has received training inside the study of chemistry is known as a chemist (from the Greek chm(a) alchemist; replacing chymist from Latin “ alchemist). Chemists look into the composition and characteristics of stuff.

Is a pharmacist a chemist?

A pharmacist is a medical professional who helps prepare, controls, formulates, preserves, distributes, and advises and guides the general public on the proper use of medications to achieve maximum results. They are also referred to as chemists (Commonwealth English), druggists (North American, and, archaically, Commonwealth English) and chemists (Commonwealth English).

To know more about Chemist visit:

https://brainly.com/question/28214900

#SPJ4

Calculate the standard reaction entropy for the decomposition of 1 mol calcite to carbon dioxide gas and solid calcium oxide at 25°c.

Answers

A process employed entropy was 160.6 J/mol*K again for decomposition if 1 mol calcium calcite to dioxide and white precipitated oxide at 25 °C.

How do you define reaction in chemistry?

One or more substances—known as reactants—are transformed into one or more other substances—known as products—in a chemical reaction. Substances are composed up of chemical components or chemical elements.

Explain type of rections?

The five basic types of chemical processes are synthesis, breakdown, one, double replacement, and combustion. By analyzing both reactants and products, you can assign a reaction to one of these categories.

Briefing:

CaCO3(s) → CaO (s) + CO2 (g)

ΔS° = (1 mol) [ΔS° for CaO (s)] + (1 mol) [ΔS° for CO2(g)] – (1 mol)[ΔS° for CaCO3(s)]

= (1 mol) (39.8 J/mol K) + (1 mol) (213.7 J/mol K) – (1 mol) (92.9 J/mol K)

= 160.6 J/K

To know more about Reaction visit:

brainly.com/question/28984750

#SPJ4

The room temperature BCC single-phase solid solution of carbon in iron is known as:
A. Austenite B. Ferrite C. Cementite D. Pearlite
B

Answers

The room temperature BCC single-phase solid solution of carbon in iron is known as: B. Ferrite

ferrite is a ceramic-like substance having magnetic characteristics that may be used in many different kinds of electrical equipment. Ferrite are polycrystalline, or made up of many tiny crystals, and are hard, brittle, iron-containing, often gray or black materials.

Temperature is a unit of measurement that may be represented on a variety of scales, including Fahrenheit and Celsius. Temperature shows the direction of the spontaneous movement of heat energy, i.e., from a hotter body (one with a higher temperature) to a colder body (one at a lower temperature).

Learn more about ferrite here:

https://brainly.com/question/13002211

#SPJ4

which parameters are held constant in experiments 1 and 2? number of moles of gas temperature volume pressure

Answers

The parameters held constant in Experiment 1 are pressure and number of moles. The parameters held constant in Experiment 2 are temperature and number of moles.

What is apparent molecular weight of air?

The sum of the products of the mole fractions of each component times the molecular weight of that component is defined as apparent molecular weight.

What is pressure and temperature?

The force of all gas particle/wall collisions divided by the area of the wall is defined as pressure (P): Pressure is one of the primary observable quantities of this phase of matter; it is exerted by all gases.

Temperature is a measure of how hot or cold something is represented in terms of one of several scales, including Fahrenheit and Celsius. The direction in which heat energy will spontaneously flow is indicated by temperature.

The parameters held constant in Experiment 1 are pressure and number of moles. The parameters held constant in Experiment 2 are temperature and number of moles.

To know more about apparent molecular weight of air, check out:

https://brainly.com/question/11466114

#SPJ4

a net magnetic moment is associated with each atom in paramagnetic and ferromagnetic materials. explain why ferromagnetic materials can be permanently magnetized whereas paramagnetic ones cannot

Answers

Ferromagnetic materials can be permanently magnetized whereas paramagnetic ones cannot because in ferromagnetic material the electron spin is in the same direction whereas in the paramagnetic material the electrons spin is in all direction.

A net magnetic moment is associated with each of the atom in the paramagnetic and the ferromagnetic materials. the ferromagnetic is permanently magnetized as the in case of ferromagnetic material the electron spin is in same direction. and ferromagnetic material shows strong attractive or repulsive force when ferromagnetic material introduced to the permanent magnet.

In the case of paramagnetic material the electrons spin is in all the direction thats why paramagnetic material cannot be permanently magnetized.

To learn more about ferromagnetic material here

https://brainly.com/question/29411314

#SPJ4

Nuclear decay occurs according to first-order kinetics. Scandium-43 decays with a rate constant of 0. 178 days–1. After 15. 0 days, a sample has a mass of 1. 73 g. What was the original mass of the sample?.

Answers

According to the claim that nuclear decay follows first-order kinetics, the sample's original mass is 25.0 g.

Describe nuclear energy.

The force found in a protons and neutrons, or core, is referred to as nuclear energy. All everything in the cosmos is made up of microscopic building blocks called atoms, and the nucleus is held together by energy.

What occurs in the event of a nuclear power station bombing?

An enormous quantity of radioactive material might be spilled into the atmosphere in the event of a nuclear facility meltdown or explosion. If there had been an explosion, everyone inside the nuclear site would likely be poisoned and potentially hurt.

Briefing:

Expression for rate law for first order kinetics is given by:

t = 2.303/k * log(a/(a - x))

where,

k = rate constant  = 0.178 days^-1

t = time passed by the sample = 15days

a = original or initial amount of the reactant

a - x = amount left after decay process = 1.73g

Now put all the given values in above equation, we get

15=(2.303/0.178) * log (a/1.73)

log (a/1.73) = 15 * 0.178/2.303

a/1.73 = 10^( 15*0.178/2.303)

a = 1.73 * 10^( 2670/2303)

a = 1.73 * 10^(1.15935736)

a = 1.73 * 14.433024871

a = 24.9691330268

Therefore, a is approximately 25 grams .

To know more about Nuclear visit:

https://brainly.com/question/28081695

#SPJ4

carbon dioxide is carried in three forms in the blood. ranking them from greatest to least amount carried, the sequence would be:

Answers

The three forms of carbon dioxide in the blood ranking them from greatest to least amount carried, the sequence would be bicarbonate ion, carbamino hemoglobin, and dissolved in plasma.

Most carbon dioxide (about 70%) is transported as bicarbonate ions in the plasma. An increase in carbon dioxide in the blood will cause a slight increase in H+ concentration (drop in pH).

Learn more about Blood Ranking:

https://brainly.com/question/28203642

#SPJ4

peleaste help me :(

Answers

The increase in the ocean's average water temperature during mid months of the year may be associated with the summer season and therefore those cities should be located in the northern hemisphere.

Why does temperature vary in the Hemispheres?

Temperature varies in the Hemispheres due to the amount of solar radiation received by the earth's surface, which is higher during mid-months (i.e. June, July and August) in the northern hemisphere.

Therefore, with this data, we can see that temperature varies in the hemispheres according to the month which is associated with the solar radiation received in these months.

Learn more about temperature and hemispheres here:

https://brainly.com/question/29539643

#SPJ1

inthee2reaction,whatwasthepercentageof1-buteneproductformed?explain why the percentage of 1-butene formed was higher in the e2 reaction compared to the e1 reaction.

Answers

In the E2 reaction, the percentage of formation of 1- butene was 20.7%.

The E2 reaction is defined as the process that takes place in one-step, and the E1 reaction is defined as the two-step mechanism. The numbers are used to represent the kinetics of the reaction rather than the number of steps in the mechanism.

E2 is bimolecular (second-order) kinetics, whereas E1 is unimolecular (first-order) kinetics. The three key factors that affect E1 elimination reactions are the solvent type, the leaving group's shape, and the carbocation's stability.

Hence, the percentage of formation of 1- butene was 20.7% and the reason is explained above.

Learn more about E1 and E2 reactions from the link given below.

https://brainly.com/question/17144654

#SPJ4

Other Questions
TRUE/FALSE. increasing your audience's commitment to your central idea by fostering the conviction of a concerted audience is appropriate for what would novel be in diagrams Solve: -5/6 + m = -3 1/6m= -4m= -2m= -2 1/6m= -2 1/3 paul and stacy have a very volatile conflict style. they both are very forceful and inevitably end up hurling insults at each other until they both withdraw exhausted. this is an example of which conflict style? a meterstick of uniform density is hung from a string tied at the 11-cm mark. a 0.40-kg object is hung from the zero end of the meterstick, and the meterstick is balanced horizontally. what is the mass of the meterstick? Which passage would have an informal tone?OA. A persuasive paper for classOB. An email to a friendOC. A movie review for the school paperOD. A letter to a company Where are the mountains of South America located? What is the reason for those mountains? a nurse is administering an injection of insulin to a 5-year-old who has type i diabetes. which statement by the nurse would take into consideration this childs developmental level? a high-fidelity sound system may have a frequency range that extends up to or beyond 20,000 hz. what is the purpose of this extended range? Calculate the standard reaction entropy for the decomposition of 1 mol calcite to carbon dioxide gas and solid calcium oxide at 25c. with an increasing emphasis on human rights within international affairs, the 1990s saw the growth of international human rights organizations. which of the following options represent issues present on the international human rights agenda in the 1990s? the nurse on the medicalsurgical unit is reviewing discharge instructions with a client who has a history of glaucoma. the nurse should anticipate the use of what medications? Identify the terms and like terms in the expression. 1/2s4+3/4s+1/8s3HELP ME PLEASE TvT a 45-year-old client who recently completed alcohol detoxification reports plans to begin using disulfirams as part of the alcoholism treatment regimen. which client teaching would the nurse share regarding this medication? You want to study a biological specimen by means of a wavelength of 20.0 nm and have a choice of using electromagentic waves or an electron microscope.A. Calculate the ratio of the energy of a 20.0 nm -wavelength photon to the kinetic energy of a 20.0 nm -wavelength electron.B. In view of your answer to part A, which would be less damaging to the specimen you are studying, photons or electrons? A student wants to teach a friend how to sew. Which type of medium should the student use?(1 point). the director is responsible for shaping the structure of the production through movement, pace, and rhythm. with this in mind, the faults most often associated with poor direction are blank . This is NOT multiple choice Solve the equation 15e^4x = 12 for xShow your work pleaseA) identify the exact solution B) approximate the solution to the nearest thousandth. In a double bond, two pairs of electrons are shared between two atoms. Based on this information, draw the hydrogen atoms such that each carbon atom has four bonds. Then record the number of hydrogen atoms you drew using a text box. what is solar activity? describe key features including sunspots, solar prominences, solar flares, and coronal mass ejections.