Answer:
Explanation:
The branch of science which deals with celestial objects, space, and the physical universe as a whole.
Answer:
The study of the stars, planets, and galaxies. People study astronomy to origins and evolution of our celestial objects and phenomena
Explanation:
A 10kg block is Pulled along a horizontal
Surface by a force
of 50N at an angles
of 37° with the horizontal If the
coefficient of sliding friction b/n the
block and the surface is o.2
(g=10m/s^2 Sin 37=O.6 and cos 37 = 0.8)
A, what frictional forces acting on the block?
B,what is the acceleration of the block?
Answer:
hope u can understand the method
When a particular hanging mass is suspended from the string, a standing wave with two segments is formed. When the weight is reduced by 2.2 kg, a standing wave with five segments is formed. What is the linear density of the string
Solution :
Mass is varied keeping frequency constant.
Wavelength, λ [tex]$=\frac{2l}{n}$[/tex]
where length of spring = l
number of segments = n
Velocity, v = λ x f
= [tex]$\sqrt{\frac{T}{\mu}}$[/tex]
[tex]$\mu $[/tex] = mass density, T = tension in string
[tex]$T=\frac{4 \mu l^2f^2}{n^2}$[/tex]
[tex]$T=mg = \frac{4 \mu l^2f^2}{n^2}$[/tex] , n = 2
[tex]$T = (m-2.2)g = \frac{4 \mu l^2f^2}{n^2}, n = 5$[/tex]
[tex]$\Rightarrow \frac{m}{m-2.2}=\frac{25}{4}$[/tex]
[tex]$\Rightarrow m = 2.619\ kg$[/tex]
Therefore, μ = 0.002785 kg/ m
Frequency is varied keeping T constant
[tex]$T=\frac{4 \mu l^2f^2}{n^2}, f=60 , \ \ n = 2$[/tex]
[tex]$T=\frac{4 \mu l^2f^2}{n^2}, f=? , \ \ n = 7$[/tex]
[tex]$\Rightarrow \frac{60^2}{4}=\frac{f^2}{49}$[/tex]
f = 210 Hz
The density of table sugar is 1.59g/cm3 what is the volume of 7.85g of sugar?
Answer: 4.94cm³
Explanation:
Data;
ρ = 1.59g/cm³
mass = 7.85g
volume = ?
density = mass / volume
ρ = m / v
v = m / ρ
v = 7.85 / 1.59
v = 4.94cm³
An 800 kg charging bull rams through a wooden fence. It was travelling at
5 m/s, now it's travelling at 3 m/s. How much impulse did the bull
experience by smashing the fence?
Answer:
J = 1600 kg-m/s
Explanation:
Given that,
The mass of charging bull rams, m = 800 kg
Initial speed, u = 5 m/s
Final speed, v = 3 m/s
We need to find the impulse the bull experience by smashing the fence. Let it is J. We know that, impulse is equal to the change in momentum such that,
J = m(v-u)
Put all the values,
J = 800(3-5)
= 800(-2)
= -1600 kg-m/s
Hence, the magnitude of impulse is equal to 1600 kg-m/s.
In the physics lab, a block of mass M slides down a frictionless incline from a height of 35cm. At the bottom of the incline it elastically strikes another block that is only one-half its mass. Find the velocity of block M at the bottom of the incline before the collision with the small block m.
Solution :
Given :
M = 0.35 kg
[tex]$m=\frac{M}{2}=0.175 \ kg$[/tex]
Total mechanical energy = constant
or [tex]$K.E._{top}+P.E._{top} = K.E._{bottom}+P.E._{bottom}$[/tex]
But [tex]$K.E._{top} = 0$[/tex] and [tex]$P.E._{bottom} = 0$[/tex]
Therefore, potential energy at the top = kinetic energy at the bottom
[tex]$\Rightarrow mgh = \frac{1}{2}mv^2$[/tex]
[tex]$\Rightarrow v = \sqrt{2gh}$[/tex]
[tex]$=\sqrt{2 \times 9.8 \times 0.35}$[/tex] (h = 35 cm = 0.35 m)
= 2.62 m/s
It is the velocity of M just before collision of 'm' at the bottom.
We know that in elastic collision velocity after collision is given by :
[tex]$v_1=\frac{m_1-m_2}{m_1+m_2}v_1+ \frac{2m_2v_2}{m_1+m_2}$[/tex]
here, [tex]$m_1=M, m_2 = m, v_1 = 2.62 m/s, v_2 = 0$[/tex]
∴ [tex]$v_1=\frac{0.35-0.175}{0.5250}+\frac{2 \times 0.175 \times 0}{0.525}[/tex]
[tex]$=\frac{0.175}{0.525}+0$[/tex]
= 0.33 m/s
Therefore, velocity after the collision of mass M = 0.33 m/s
oscillating spring mass systems can be used to experimentally determine an unknown mass without using a mass balance. a student observes that a particular spring-mass system has a frequency of oscillation of 10 Hz. the spring constant of the spring is 250 N/m. what is the mass?
Answer:
0.063 Kg
Explanation:
From the question given above, the following data were obtained:
Frequency (f) = 10 Hz
Spring constant (K) = 250 N/m
Mass (m) =?
Next, we shall determine the period of oscillation. This can be obtained as follow:
Frequency (f) = 10 Hz
Period (T) =?
T = 1/f
T = 1/10
T = 0.1 s
Finally, we shall determine the mass of the spring. This can be obtained as follow:
Spring constant (K) = 250 N/m
Period (T) = 0.1 s
Pi (π) = 3.14
Mass (m) =?
T = 2π√(m/K)
0.1 = 2 × 3.14 × √(m/250)
0.1 = 6.28 × √(m/250)
Divide both side by 6.28
0.1 / 6.28 = √(m/250)
Take the square of both side.
(0.1 / 6.28)² = m/250
Cross multiply
m = (0.1 / 6.28)² × 250
m = 0.063 Kg
Therefore, the mass of the spring is 0.063 Kg.
The length of the slope of a mountain is 2780 m, and it makes
its base?
angle of 14.1° with the horizontal. What is the height of the mountain, relative to
Additional Materials
Reading
Answer:
677 m
Explanation:
Using the definition of the sine of an angle, we can write
sin 14.1 = (height of mountain) / (slope length of mountain)
sin 14.1 = H / (2780 m) ---> H = (2780 m) x sin 14.1
= 677 m
The height of the mountain is 677.21 m
The given parameters;
length of the slope, L = 2780 m
angle of inclination, Ф = 14.1°
let the height of the mountain, = h
A simple sketch of the problem is given below;
↓P
↓
↓ h
↓ 14.1°
↓------------------------------------------------Q
A straight line joining PQ is the hypotenuse of the right triangle.
The height of the right triangle is calculated as follows;
[tex]sin(14.1) = \frac{h}{PQ} \\\\\h = PQ \times sin(14.1)\\\\h = 2780 \times sin(14.1)\\\\h = 677.21 \ m[/tex]
Thus, the height of the mountain is 677.21 m
Learn more here: https://brainly.com/question/4326804
An ocean thermal energy conversion system is being proposed for electric power generation. Such a system is based on the standard power cycle for which the working fluid is evaporated, passed through a turbine, and subsequently condensed. The system is to be used in very special locations for which the oceanic water temperature near the surface is approximately 300 K, while the temperature at reasonable depths is approximately 280 K. The warmer water is
Answer:
Explanation:
Dear Student, this question is incomplete, and to attempt this question, we have attached the complete copy of the question in the image below. Please, Kindly refer to it when going through the solution to the question.
To objective is to find the:
(i) required heat exchanger area.
(ii) flow rate to be maintained in the evaporator.
Given that:
water temperature = 300 K
At a reasonable depth, the water is cold and its temperature = 280 K
The power output W = 2 MW
Efficiency [tex]\zeta[/tex] = 3%
where;
[tex]\zeta = \dfrac{W_{out}}{Q_{supplied }}[/tex]
[tex]Q_{supplied } = \dfrac{2}{0.03} \ MW[/tex]
[tex]Q_{supplied } = 66.66 \ MW[/tex]
However, from the evaporator, the heat transfer Q can be determined by using the formula:
Q = UA(L MTD)
where;
[tex]LMTD = \dfrac{\Delta T_1 - \Delta T_2}{In (\dfrac{\Delta T_1}{\Delta T_2} )}[/tex]
Also;
[tex]\Delta T_1 = T_{h_{in}}- T_{c_{out}} \\ \\ \Delta T_1 = 300 -290 \\ \\ \Delta T_1 = 10 \ K[/tex]
[tex]\Delta T_2 = T_{h_{in}}- T_{c_{out}} \\ \\ \Delta T_2 = 292 -290 \\ \\ \Delta T_2 = 2\ K[/tex]
[tex]LMTD = \dfrac{10 -2}{In (\dfrac{10}{2} )}[/tex]
[tex]LMTD = \dfrac{8}{In (5)}[/tex]
LMTD = 4.97
Thus, the required heat exchanger area A is calculated by using the formula:
[tex]Q_H = UA (LMTD)[/tex]
where;
U = overall heat coefficient given as 1200 W/m².K
[tex]66.667 \times 10^6 = 1200 \times A \times 4.97 \\ \\ A= \dfrac{66.667 \times 10^6}{1200 \times 4.97} \\ \\ \mathbf{A = 11178.236 \ m^2}[/tex]
The mass flow rate:
[tex]Q_{H} = mC_p(T_{in} -T_{out} ) \\ \\ 66.667 \times 10^6= m \times 4.18 (300 -292) \\ \\ m = \dfrac{ 66.667 \times 10^6}{4.18 \times 8} \\ \\ \mathbf{m = 1993630.383 \ kg/s}[/tex]
Electroconvulsive therapy would be done under the
supervision of a counseling psychologist, where high level
of electric shock would be admistered.
Select one:
True
False
Answer:
the answer of this question is true
Please select the word from the list that best fits the definition
location of most volcanoes
Island arc
Lava
Basalt
Magma
Hotspot
Plate boundaries
Answer:
The answer is E., or "Plate Boundaries".
The word best describes the definition of the location of volcanoes is "plate boundaries". Therefore, option (E) is correct.
What are plate boundaries?The lithosphere is broken into tectonic plates that undergo some large motions and the boundary regions between plates are called plate boundaries. Based on their motions there are three kinds of plate boundaries: divergent, convergent, and transform.
Divergent boundaries are moving away from one another and separate, they form a rift. As the gap widens, the underlying layer may be soft for molten lava underneath to push upward and resulting in the formation of volcanic islands.
Convergent boundaries move towards one another and collide, subduction usually takes place. The denser plate goes underneath the less dense one and the plate boundaries also experience buckling.
Transform boundaries slide alongside one another and are exposed to huge amounts of stress and strain and are momentarily held in place. The two plates succeed in moving with respect to one another and cause earthquakes.
Learn more about plate boundaries, here:
https://brainly.com/question/18256552
#SPJ5
what unit is used to measure resistance
Answer:
Ohms
Explanation:
The unit of resistance is ohms.
Types of government
Answer:
Explanation:
The different types of government include a direct democracy, a representative democracy, socialism, communism, a monarchy, an oligarchy, and an autocracy
What does it mean when work is positive?
Answer:
When force and displacement are in the same direction, the work performed on an object is said to be positive work. Example: When a body moves on the horizontal surface, force and displacement act in the forward path. The work is done in this case known as Positive work.
Explanation:
Hope this helps you
An object of mass 45 kg is observed to accelerate at the rate of 6 m/s2. Calculate the force required to produce this acceleration
A solenoid that is 66.2 cm long has a cross-sectional area of 18.0 cm2. There are 1300 turns of wire carrying a current of 8.15 A. (a) Calculate the energy density of the magnetic field inside the solenoid. (b) Find the total energy in joules stored in the magnetic field there (neglect end effects).
Answer:
(a) Energy Density = 160.94 J/m³
(b) Energy Stored = 0.192 J
Explanation:
(a)
The energy density of the magnetic field inside the solenoid is given by the following formula:
[tex]Energy\ Denisty = \frac{B^2}{2\mu_o}\\[/tex]
where,
B = magnetic field strength of solenoid = [tex]\frac{\mu_oNI}{l}[/tex]
Therefore,
[tex]Energy\ Density = \frac{\mu_oN^2I^2}{2l^2}[/tex]
where,
μ₀ = permeability of free space = 4π x 10⁻⁷ N/A²
N = No. of turns = 1300
I = current = 8.15 A
L = length = 66.2 cm = 0.662 m
Therefore,
[tex]Energy\ Density = \frac{(4\pi\ x\ 10^{-7}\ N/A^2)(1300)^2(8.15\ A)^2}{2(0.662\ m)^2}[/tex]
Energy Density = 160.94 J/m³
(b)
Energy Stored = (Energy Density)(Volume)
Energy Stored = (Energy Density)(Area)(L)
Energy Stored = (160.94 J/m³)(0.0018 m²)(0.662 m)
Energy Stored = 0.192 J
what is the difference between kinetic and potential energy
Answer:
Kinetic energy is energy possessed by a body by virtue of its movement. Potential energy is the energy possessed by a body by virtue of its position or state. While kinetic energy of an object is relative to the state of other objects in its environment, potential energy is completely independent of its environment. Hence the acceleration of an object is not evident in the movement of one object, where other objects in the same environment are also in motion. For example, a bullet whizzing past a person who is standing possesses kinetic energy, but the bullet has no kinetic energy with respect to a train moving alongside.
I think this answer is helped you
Answer:
the what state does alduos is 500 stack of ml tayo the little man ♂️ jajao
kalokoha ya
ansjsjdk
Calculate the potential difference across the 8 ohm resistor
Explanation:
if the current is 1A
V=iR
V= 1 × 8
V = 8volts
what is the maximum distance we can shoot a dart,from ground level provided our toy dart gun gives a maximum initial velocity of 2.7m/s and air resistance is negligible
Answer:
R = v^2 sin 2 theta / g
The range provides the distance a projectile can travel
R(max) = v^2 / g if theta = 45 deg
R = 2.7^2 / 9.8 = .74 m
when two capacitor 3muF and 6muF are connected in a parallel and combination is charged to a potential of 120 volt the potential difference across the 3muF capacitor is
Answer:
V₁ = V = 120 V
Explanation:
Such a combination of capacitors in which;
1- Potential difference across each capacitor is the same
2- Total charge is distributed amongst the capacitors
; is called Parallel Combination.
Therefore, in this case, the potential difference across each capacitor will also be the same. Because the capacitors are connected in parallel here. So the voltage across 3 μF capacitor will be the same as the voltage across the 6 μF capacitor and they both will be equal to the total potential difference.
V₁ = V = 120 V
A 4.00-kg block hangs by a light string that passes over a massless, frictionless pulley and is connected to a 6.00-kg block that rests on a frictionless shelf. The 6.00-kg block is pushed against a spring to which it is not attached. The spring has a spring constant of 180 N/m, and it is compressed by 30.0 cm. Find the speed of the block after the spring is released and the 4.00-kg block has fallen a distance of 40.0 cm.
Answer:
v = 2.82 m/s
Explanation:
For this exercise we can use the conservation of energy relations.
We place our reference system at the point where block 1 of m₁ = 4 kg
starting point. With the spring compressed
Em₀ = K_e + U₂ = ½ k x² + m₂ g y₂
final point. When block 1 has descended y = - 0.400 m
Em_f = K₂ + U₂ + U₁ = ½ m₂ v² + m₂ g y₂ + m₁ g y
as there is no friction, the energy is conserved
Em₀ = Em_f
½ k x² + m₂ g y₂ = ½ m₂ v² + m₂ g y₂ + m₁ g y
½ k x² - m₁ g y = ½ m₂ v²
v² = [tex]\frac{k}{m_2} x^2 - 2 \frac{m_1}{m_2} \ g y[/tex]
let's calculate
v² = [tex]\frac{180}{6.00} \ 0.300^2 - 2 \ \frac{4.00}{6.00} \ 9.8 \ (- 0.400)[/tex]
v² = 2.7 + 5.23
v = √7.927
v = 2,815 m / s
using of significant figures
v = 2.82 m/s
How much heat is required to raise the temperature of 50 grams of water from 30 °C to 90 °C? C of water 4186 J / kg C.
12558 J
12558000 J
125580 J
1255800 J
Answer:
12558 J
Explanation:
Please do mark as brainliest. Hope this helps! :)
A soccer ball is released from rest at the top of a grassy incline. After 6.2 seconds, the ball travels 47 meters. One second later, the ball reaches the bottom of the incline.
(a) What was the balls acceleration?(assume that the acceleration was constant).
(b) How long was the incline?
Answer:
(a) a = 2.44 m/s²
(b) s = 63.24 m
Explanation:
(a)
We will use the second equation of motion here:
[tex]s = v_it+\frac{1}{2}at^2[/tex]
where,
s = distance covered = 47 m
vi = initial speed = 0 m/s
t = time taken = 6.2 s
a = acceleration = ?
Therefore,
[tex]47\ m = (0\ m/s)(6.2\ s)+\frac{1}{2}a(6.2\ s)^2\\\\a = \frac{2(47\ m)}{(6.2\ s)^2}[/tex]
a = 2.44 m/s²
(b)
Now, we will again use the second equation of motion for the complete length of the inclined plane:
[tex]s = v_it+\frac{1}{2}at^2[/tex]
where,
s = distance covered = ?
vi = initial speed = 0 m/s
t = time taken = 7.2 s
a = acceleration = 2.44 m/s²
Therefore,
[tex]s = (0\ m/s)(6.2\ s)+\frac{1}{2}(2.44\ m/s^2)(7.2\ s)^2\\\\[/tex]
s = 63.24 m
The Equipartition Theorem follows from the fundamental postulate of statistical mechanics--that every energetically accessible quantum state of a system has equal probability of being populated, which in turn leads to the Boltzmann distribution for a system in thermal equilibrium.
a. True
b. False
Answer:
Hello! Your answer would be, A) True
Explanation:
Hope I helped! Ask me anything if you have any questions. Brainiest plz!♥ Hope you make a 100%. Have a nice morning! -Amelia♥
Se transmiten ondas transversales en una cuerda tensada orientada sobre el eje x. La función de ondas correspondientes es y= 5.00 sen(6.05x + 5.19t + 1.57). Donde y y x están en metros y t en segundos. Cual es la rapidez de las ondas que se transmiten en dicha cuerda?
Answer:
Explanation:
Whats the entire question?
You are playing in a volley ball game Your team has 12 and the other team has 18.
How many points does your team needs to win?
How many points does the other team needs to win?
Answer:
you need 7 points and the other team just needs to stop you from scoring
Explanation:
On a distance-time graph, what is shown when the curve is flat going from left to the right?
A. a negative speed
B. no speed
C. a positive speed
D. It does not mean anything.
Please help me !!im on a test
What is an appraisal of an employee's performance in the workplace?
A. consensus
B. evaluation
C. procedure
D. metacognition
Answer:
B. evaluation
Explanation:
An employee can be defined as an individual who is employed by an employer of labor to perform specific tasks, duties or functions in an organization.
Basically, an employee is saddled with the responsibility of providing specific services to the organization or company where he is currently employed while being paid a certain amount of money hourly, daily, weekly, or monthly depending on the contractual agreement between the two parties (employer and employee).
Hence, while an employer may be the owner of a business firm or company, an employee is a subordinate employed to provide unwavering services to the employer while also, being professional and diligent at all times.
Human resources management (HRM) can be defined as an art of managing, controlling and improving the number of people (employees or workers), functions, evaluation of employees, activities which are being used effectively and efficiently by an organization.
Hence, human resources managers are saddled with the responsibility of recruiting, evaluating, managing and improving the welfare and working conditions of the employees working in an organization.
Basically, the human resources manager carry out appraisals on the performance of the various employees working in an organization. These informations about employees are typically used for promotional purposes, allowances and other benefits or form of rewards.
True or false. When a girl walks the action of pushing and the equal amd opposite reaction is being projected forward
This is true I think
It applies to Newton's Laws
it's true because it's a part of newtons law
Which is the best way to become familiar with your company's policies and procedures?
O
A. ask the person who hired you
O
B. look in the employee handbook
C. tell your supervisor you need help
D. visit the company's website
Which of the following is a category of mechanical wave?
O A. Transverse
B. Frictional
C. Parallel
D. Perpendicular
Answer:
a
because the mechanical wave is when it goes over and over again
Answer:
The answer is a like i said 3hrs ago i dont know if this guy copied me tbh
Explanation: