Answer:
a. The Singapore dollar to Australian dollar cross rate is (SGD = 1.00 AUD) 1.0278.
b. The number of Australian dollars Anne will get is 1,070.25 Australian dollars.
Explanation:
a. What is the Singapore dollar to Australian dollar cross rate?
Given:
Spot rate (SGD = 1.00 USD) 1.3443
Spot rate (USD = 1.00 AUD) 0.7646
These imply that:
1.3443 SGD = 1.00 USD ..................... (1)
0.7646 USD = 1.00 AUD ................... (2)
From equation (2), we divide through by 0.7646 to have:
0.7646 / 0.7646 USD = 1.00 / 0.7646 AUD
1.00 USD = 1.3079 AUD
Substituting this into equation (1) and solve as follows:
1.3443 SGD = 1.00 USD = 1.3079 AUD
Dropping 1.00 USD, we have:
1.3443 SGD = 1.3079 AUD
Dividing through by 1.3079, we have:
1.3443 / 1.3079 SGD = 1.3079 / 1.3079 AUD
1.0278 SGD = 1.00 AUD
Therefore, the Singapore dollar to Australian dollar cross rate is (SGD = 1.00 AUD) 1.0278.
b. How many Australian dollars will Anne get for her Singapore dollars?
This can be calculated as follows:
Number of Australian dollars Anne will get = Amount of Singapore dollars Anne wishes to exchange for Australian dollars / Singapore dollar to Australian dollar cross rate = 1,100 / 1.0278 = 1,070.24712979179 Australian dollars
Rounding to two decimal places as required, we have:
Number of Australian dollars Anne will get = 1,070.25 Australian dollars
Therefore, the number of Australian dollars Anne will get is 1,070.25 Australian dollars.
Based on the spot rates between the three nations, the following is true:
The Singapore dollar to Australia dollar is 1.02785178 Singapore Dollars. Anne Dietz will get AUD 1,070.19.To find the cross rate, you should multiply the Singapore dollar to USD rate with the USD to Australian dollar rate:
= 1.3443 x 0.7646
= 1.02785178 Singapore Dollars
The amount that Anne would get for 1,100 SGD is:
= 1,100 / 1.02785178
= AUD 1,070.19
In conclusion, Anne would get AUD 1,070.19.
Find out more about cross rates at https://brainly.com/question/10112843.
Various financial data for SunPath Manufacturing for 2019 and 2020 follow. 2019 2020 Output: Sales $ 300,000 $ 330,000 Inputs: Labor 40,000 43,000 Raw Materials 45,000 51,000 Energy 10,000 9,000 Capital Employed 250,000 262,000 Other 2,000 6,000 What is the percentage change in the energy partial productivity measure for SunPath between 2019 and 2020
Answer:
22.20%
Explanation:
Energy Productivity Ratio 2019 = 300,000 / 10,000 = 30
Energy Productivity Ratio 2020 = 330,000 / 9,000 = 36.66
The percentage change = (36.66-30)/30 * 100
The percentage change = 0.222 * 100
The percentage change = 22.20%
So, the percentage change in the energy partial productivity measure for SunPath between 2019 and 2020 is 22.20%
Two European Courts are the Court of Justice of the European Union and the European Court of Copyrights.
False
True
A pre-concert rehearsal is an example of
Media strategy
Marginal analysis
Quality control
Goodwill
Answer:
Quality control
Explanation:
Six Sigma is a quality business management strategy which helps business organizations to improve the quality of processes, products and services by discovering and eliminating defects, variations or errors. It is a strategic business concept that was developed in 1986 by Motorola.
Under the six sigma approach, any process that doesn't provide customer satisfaction or causes challenges in an organisation's process should be eliminated from the system in order to produce quality products and services. It allows only 3.4 defective features for every million opportunities and as such expects processes to be defect free 99.99966 percent of the time.
Generally, there are two (2) main methods of achieving the six sigma approach;
1. DMAIC: define, measure, analyze, improve and control.
2. DMADV: define, measure, analyze, design and verify.
Hence, a pre-concert rehearsal is an example of quality control because the participants or team members are made to practice their routines so as to master them and prevent mistakes on the day of the concert. Thus, a pre-concert is aimed at getting the best out of a team in order to deliver a quality performance to the audience.
Name some of the faculties of Nepal Sanskrit University?
Explanation:
Agricultural Engineering
Answer:
Veda, Philosophy, astronomy, yoga, homeopathy, naturopathy, history, Buddha Darshan etc
Denton and Carlo were employed at an appliance plant. Their job required them to do occasional maintenance work while standing on a wire mesh twenty feet above the plant floor. Other employees had fallen through the mesh, and one was killed by the fall. When Denton and Carlo were asked by their supervisor to do work that would likely require them to walk on the mesh, they refused due to their fear of bodily harm or death. Because of their refusal to do the requested work, the two employees were fired. Was their dis-charge wrongful
Answer:
This is wrongful discharge.
Explanation:
Under the Occupational Safety and Health Act, an employer cannot discharge an employee who files a complaint or who, in good faith, refuses to work in a high-risk area if bodily harm or death might result. Because a previous employee had died because of the high risk maintenance, Darla and Piper were acting in good faith.
Gordon is a new divisional manager at AskSocrates. In reorganizing his division, he must make some decisions regarding the span of control for management within his division. While observing the departments in his division, Gordon notices that some managers with wide spans of control seem to perform more effectively than other managers with similarly sized spans of control. Which of the following statements is most likely to be true regarding the high-performing managers?
a. These managers are paid higher salaries than the low-performing managers.
b. These managers have external locus of control.
c. The employees within their departments tend to compete to reach productivity goals, which boosts performance.
d. The employees within their departments score high on agreeableness.
e. The employees within their departments are highly skilled and very knowledgeable about their jobs.
Answer:
E) The employees within their departments are highly skilled and very knowledgeable about their jobs.
Explanation:
Gordon is a new divisional manager at AskSocrates. In reorganizing his division, he must make some decisions regarding the span of control for management within his division. While observing the departments in his division, Gordon notices that some managers with wide spans of control seem to perform more effectively than other managers with similarly sized spans of control. In this case , the statement that regards high-performing managers is that The employees within their departments are highly skilled and very knowledgeable about their jobs. skilled employees are ones that posses special skills as well as knowledge and training that are needed in their various departments or section of work. They tends to make things easier for their manager since they know more about their work.
Krumbly Corporation uses the FIFO method in its process costing system. At the beginning of the month, Department D's work in process inventory contained 2,000 units. These units were 100% complete with respect to materials and 40% complete with respect to conversion costs, with a total cost at that point of $13,600. During the month, conversion costs amounted to $8 per equivalent unit. If all 2,000 units are fully complete by the end of the month and transferred out of the department, the total cost of the 2,000 units transferred out will be closest to:
Answer:
the total cost is $23,200
Explanation:
The computation of the total cost of the 2,000 units transferred is as follows:
= Total cost at that point + other cost
= $13,600 + (2,000 × (1 - 0.40) × $8)
= $13,600 + 2,000 × 60% × $8
= $13,600 + $9,600
= $23,200
hence, the total cost is $23,200
You purchased eight put option contracts with a strike price of $30 and a premium of $1.10. What is the total net amount you will receive for your shares if you exercise this contract when the underlying stock is selling for $26.50 a share
Answer:
$23120
Explanation:
The computation of the total net amount received is shown below:
Total Premium Paid
= 800 Option × $1.10
= $880
And,
Amount Received is
= 800 Option × $30
= $24000
So, Net Amount Received is
= $24000 - $880
= $23120
Blue Spruce Company had $152,600 of net income in 2016 when the selling price per unit was $153, the variable costs per unit were $93, and the fixed costs were $573,300. Management expects per unit data and total fixed costs to remain the same in 2017. The president of Blue Spruce Company is under pressure from stockholders to increase net income by $61,700 in 2017.
(a) Compute the number of units sold in 2016. (Round answer to 0 decimal places, e.g. 1,225.) ______units
(b) Compute the number of units that would have to be sold in 2017 to reach the stockholders' desired profit level. _______units
Answer:
12098
13127
Explanation:
Net income = revenue - total cost
revenue = price x unit sold
total cost = variable cost + fixed cost
variable cost = variable cost per unit x unit sold
unit sold is unknown, so it would be represented with a
$152,600 = $153a - ($93a + $573,300)
$152,600 = $153a - $93a - $573,300
Collect like terms and solve for a
a = 12,098
b. Net income in 2017 = $61,700 + $152,600 = 214,300
214,300 = $153a - $93a - $573,300
Collect like terms and solve for a
a = 13127
Job 243 was recently completed. The following data have been recorded on its job cost sheet: Direct materials $ 51,870 Direct labor-hours 435 labor-hours Direct labor wage rate $ 11 per labor-hour Machine-hours 516 machine-hours Number of units completed 3,300 units The company applies manufacturing overhead on the basis of machine-hours. The predetermined overhead rate is $13 per machine-hour. Required: Compute the unit product cost that would appear on the job cost sheet for this job. (Round your answer to 2 decimal places.)
Answer:
$19.20
Explanation:
Computation for the unit product cost that would appear on the job cost sheet for this job.
First step is to compute the Total Product cost
Job 243
Direct material $ 51,870
Direct labor (435*11) 4,785
Overhead (516*13) 6,708
Total Product cost $63,363
Now let Compute the unit product cost
Unit product cost=$63,363/3,300 units
Unit product cost =$19.20
Therefore the unit product cost that would appear on the job cost sheet for this job is $19.20
Nick and Beth run a catering business in which they have two major tasks: getting new clients and preparing food for events and parties. It takes Nick 8 hours to prepare food for an event and 4 hours of effort to get each new client. For Beth, it takes 12 hours to prepare food for an event and 3 hours to get a new client.
1. Who has an absolute advantage in food preparation?
2. Who has a comparative advantage in food preparation?
Suppose that initially, Nick and Beth are both splitting both tasks for a large number of events. Then they decide to start shifting some work according to the principle of comparative advantage. In particular, the person with the comparative advantage in food preparation will take over preparing food for one more event, and the other person will use the freed-up time to get more clients. As a result, the total number of events for which food is prepared will remain unchanged, but the number of new clients will increase by __?__.
The second part threw me off and I got confused. I put up the entire problem just to see if i answered it correctly or not to see whether that was what threw me off or not. Thanks in advance! :)
Answer:
NICK
NICK
2
Explanation:
A company has absolute advantage in the production of a good or service if it produces more quantity of a good when compared to other countries
Nick prepares food in 8 hours while Beth produces the food in 12 hours. ick thus has an absolute advantage in food preparation because he produces food in less time
A country has comparative advantage in production if it produces at a lower opportunity cost when compared to other countries.
Opportunity cost of Nick in food preparation = 4/8 = 0.5 hours
Opportunity cost of Beth in food preparation = 3 / 12 = 0.25 hours
Nick has a comparative advantage in food preparation
In 2009, Khalid was in an automobile accident and suffered physical injuries. The accident was caused by Rashad's negligence. Khalid threatened to file a lawsuit against Amber Trucking Company, Rashad's employer, claiming $50,000 for pain and suffering, $25,000 for loss of income, and $100,000 in punitive damages. Amber's insurance company will not pay punitive damages; therefore, Amber has offered to settle the case for $120,000 for pain and suffering, $25,000 for loss of income, and nothing for punitive damages. Khalid is in the 35% marginal tax bracket. What is the after-tax difference to Khalid between Khalid's original claim and Amber's offer
Answer:
$5,000
Explanation:
Amber offer = 120,000 + 25,000 = $145,000
Original claim = ($50,000 + $25,000) + [$100,000 × (1 - 0.35) = $140,000
Difference = $145,000 - $140,000 = $5,000
So, the after-tax difference to Khalid between Khalid's original claim and Amber's offer is $5,000
Nesmith Corporation is considering two alternatives: A and B. Costs associated with the alternatives are listed below: Alternative AAlternative B Materials costs$26,000 $60,000 Processing costs$32,000 $32,000 Equipment rental$10,600 $28,300 Occupancy costs$19,300 $27,200 What is the differential cost of Alternative B over Alternative A, including all of the relevant costs
Answer:
See below
Explanation:
Alternative A. Alternative B
Material cost $26,000 $60,000
Processing costs $32,000 $32,000
Equipment rental $10,600 $28,300
Occupancy Costs $19,300 $27,200
Total expenses $87,900 $147,500
Differential cost would be;
= Material cost $34,000 + Processing cost $0 + Equipment rental $17,700 + Occupancy costs $7,900
= $59,600
The following data is available for Everest Company:
Credit Sales $1,702
Net Income $112
Total Current Assets $366
Total Current Liabilities $226
Accounts Receivable, current year $160
Accounts Receivable, prior year $156
Total Stockholders' Equity, current year $550
Total Stockholders' Equity, prior year $500
Retained Earnings, current year $366
Retained Earnings, prior year $346
Market price per share $50
Average Number of Common Shares Outstanding during year 46
Required: Compute the following ratios:
A) current ratio
B) average collection period in days
C) return on stockholders' equity
D) price-earnings ratio
E) dividend yield
Answer:
a. Current ratio = Total current assets / Total current liabilities = $366 / $226 = 1.62 to 1
b. Average receivable = (Beginning receivables + Ending receivables) / 2 = ($156 + $160) / 2 = $158
Average collection period = Number of days in year / Credit sales * Average accounts receivable = 365 / $1,702 * $158 = 33.88 days
c. Average Stockholder's equity = (Beginning equity + Ending equity) / 2 = ($500 + $550) / 2 = $525
Return on stockholder's equity = Net income / Average stockholder's equity = $112 / $525 = 21.33%
d. Earnings per share = Net income / Common shares outstanding = $112 / 46 = $2.43 per share
Price earnings ratio = Market price per share / Earnings per share = $50 / $2.43 = 20.58 times
e. Dividends per share = Dividends / Common shares outstanding = $92 / 46 = $2.00 per share
Dividend yield ratio = Dividend per share / Market price per share = $2.00 / $50 = 4.00%
Workings
Beginning retained earnings $346
Add: Net income $112
Less: Ending retained earnings -$366
Dividends $92
If cash is received from customers in payment for services that have not yet been performed, the business would record the cash receipt as: Multiple Choice A debit to an unearned revenue account. A debit to a prepaid expense account. A credit to an unearned revenue account. A credit to a prepaid expense account. A credit to accounts payable.
Answer:
A credit to an unearned revenue account
Explanation:
Ordinarily, when cash is received from a person whereas service has not been performed, the accounting entry is to debit cash account and credit the unearned revenue account.
Here, the receipt of cash means that revenue was realized however, the service expected have not been performed hence necessitated crediting the unearned revenue account and a debit to the asset cash for the amount received.
The wireless phone manufacturing division of a consumer electronics company uses activity-based costing. For simplicity, assume that its accountants have identified only the following three activities and related cost drivers for indirect production costs: Activity Cost Driver Materials handling Direct-materials cost Engineering Engineering change notices Power Kilowatt hours Three types of cell phones are produced: Senior, Basic, and Deluxe. Direct costs and cost-driver activity for each product for a recent month are as follows: Senior Basic Deluxe Direct-materials cost $25,000 $ 60,000 $135,000 Direct-labor cost $14,546 $ 3,762 $ 6,772 Kilowatt hours 230,000 220,000 100,000 Engineering change notices 21 20 69 Indirect production costs for the month were as follows: Materials handling $ 15,400 Engineering 99,000 Power 11,000 Total indirect production cost $125,400 1. Compute the indirect production costs allocated to each product with the ABC system. 2. Suppose all indirect production costs had been allocated to products in proportion to their direct labor costs. Compute the indirect production costs allocated to each product. 3. In which product costs, those in requirement 1 or those in requirement 2, do you have the most confidence
Answer:
1. The indirect production costs allocated to each product with the ABC system:
Senior Basic Deluxe Total
Total indirect production cost $25,250 $26,600 $73,550 $125,400
2. The indirect production costs allocated to each product with direct labor costs:
Senior Basic Deluxe Total
Total indirect production cost $72,730 $18,810 $33,860 $125,400
3. I repose much more confidence in the product costs according to requirement 1.
Explanation:
a) Data and Calculations:
Activity Cost Driver
Materials handling
Direct-materials cost
Engineering Engineering
Senior Basic Deluxe Total
Direct-materials cost $25,000 $ 60,000 $135,000 $220,000
Direct-labor cost $14,546 $ 3,762 $ 6,772 $25,080
Kilowatt hours 230,000 220,000 100,000 550,000
Engineering change notices 21 20 69 110
Indirect production costs:
Materials handling $ 15,400 $15,400/$220,000 = $0.07
Engineering 99,000 $99,000/110 = $900
Power 11,000 $11,000/550,000 = $0.02
Total indirect production cost $125,400
Overhead Senior Basic Deluxe
Rates
Materials handling $0.07 $1,750 $4,200 $9,450
Engineering $900 18,900 18,000 62,100
Power $0.02 4,600 4,400 2,000
Total indirect production cost $25,250 $26,600 $73,550
Allocation based on direct labor costs:
Predetermined rate = $5 per direct labor cost.
Senior Basic Deluxe Total
Total indirect production cost $72,730 $18,810 $33,860 $125,400
Label the scenarios as examples of elastic, inelastic, or unit elastic demand.
a. When Ruko, a device used to stream movies at home, increases prices by 48 %, total revenue decreases by 59 %.
b. When Cinema Supreme decreases ticket prices by 12 %, total revenue does not change.
c. When Bluebox, a DVD rental kiosk, increases its prices by 52 %, total revenue increases by 34 %.
Answer:
A) elastic demand
B) unit elastic demand
C) inelastic demand
Explanation:
A)
increases prices = 48 %
total revenue decreases = 59% hence, this is elastic demand. Since increase in price has brought about decrease in quantity demand definitely revenue will fall
B)
decreases ticket prices = 12 %
total revenue doesn't altered hence it s unit elastic demand, since there is change in price and quantity demand. So revenue remains unaltered.
C)
increases its prices = 52%
total revenue increases = 34%
Quantity demanded is lower to change in price hence, increase in total revenue. Hence it's inelastic demand
From the following information, please prepare an Income Statement, Statement of Owner’s Equity, and Balance Sheet for the month of May of the current year.
Cash
$12,000
Accounts Receivable
16,000
Supplies
350
Equipment
16,500
Notes Payable
$13,000
Accounts Payable
12,000
S. Jones, Capital
18,000
S. Jones, Drawing
550
Service Revenue
6,000
Telephone Expense
350
Rent Expense
1,100
Advertising Expense
2,150
$49,000
$49,000
Answer:35,000
Explanation:
Answer:
I found answer for this at this website
Explanation:
https://gotit-pro.com/from-the-following-information-please-prepare-an-income-statement-statement-of-owners-equity-and-balance-sheet-for-the-month-of-may-of-the-current-year
WILL GIVE BRAINLIEST PLZ HELP
The controller (money manager) for a small company puts some money in a bank account paying 3% per year. He uses some additional money, amounting to 1/3 the amount placed in the bank, to buy bonds paying 4% per year. With the balance of the funds, he buys a 9% certificate of deposit. The first year the investments bring a return of $785. If the total of the investments is $10,000 how much is invested at each rate?
Answer:
$1,500 is invested in a bank account paying 3% per year.
$500 is used to buy bonds paying 4% per year.
$8,000 is used to buy 10% certificate of deposit
Explanation:
Let
x = money used to invest in a bank account paying 3% per year
y = money used to buy 10% certificate of deposit
Because the money used to buy bonds (that pays 4% per year) is equal to one-third of the money used to invest in a bank account paying 3% per year,
x/3 = money used to buy bonds (that pays 4% per year)
Because the total investment is $10,000, we add all the variables that represents the amount of money for each investments. So,
(1)
To compute the return of each investment, we change the rate to decimal and multiply it to the amount of investment because the problem only states the return of first year of investment. Then,
0.03x = return from a bank account paying 3% per year
0.04(x/3) = return from a bond paying 4% per year
0.1y = return from 10% certificate of deposit
Since the total return for the first year of investment is $865, we just add the returns of each investment and create the following equation:
Note: In equation (2), we want to have an equation with 3y so that when we subtract equation (1) to equation (2), we only have an equation involving x, which is easier to solve.
By subtracting equation (1) to equation (2),
(4x + 3y) - (1.3x + 3y) = 30,000 - 25,950
2.7x = 4,050
x = $1,500 = amount deposited in a bank account paying 3% per year
So,
x/3 = 1500/3
x/3 = $500 = amount used to buy bonds paying 4% per year
Using the value of x = 1,500 and replacing the value of x in equation (1),
4x + 3y = 30,000
4(1,500) + 3y = 30,000
6,000 + 3y = 30,000
3y = 24,000
y = $8,000 = money used to buy 10% certificate of deposit
Under contract law, a promise not to do something that a person could otherwise do __________. is only deemed legal consideration for a contract if the person giving it is financially harmed is called a forbearance and is an adequate legal value to support the existence of consideration for a contract is called a forbearance, but is not adequate legal consideration for a contract is called promissory estoppel, and qualifies as legal consideration
Answer:
is called a forbearance and is adequate legal consideration for a contract.
Explanation:
A contract can be defined as an agreement between two or more parties (group of people) which gives rise to a mutual legal obligation or enforceable by law.
Mutual assent is a legal term which represents an agreement by both parties to a contract. When two parties to a contract both have an understanding of the parameters, terms and conditions surrounding a contract, it ultimately implies that they are in agreement; this is generally referred to as mutual assent.
Under contract law, a promise not to do something that a person could otherwise do is called a forbearance and is adequate legal consideration for a contract.
For example, a creditor who decides to forebear by refusing to collect money from a debtor.
On January 1, 2021, Oliver Foods issued stock options for 47,000 shares to a division manager. The options have an estimated fair value of $7 each. To provide additional incentive for managerial achievement, the options are not exercisable unless Oliver Foods' stock price increases by 6% in four years. Oliver Foods initially estimates that it is not probable the goal will be achieved. How much compensation will be recorded in each of the next four years
Answer:
$82,250
Explanation:
the compensation per year = 47,000 x 1/4 x$7 per stock = $82,250
The compensation must be allocated proportionally to every year included in the plan, regardless of the conditions specified by the plan. The stock price already implicitly includes the most probable market conditions for the company, so that is the price that has to be used to record the compensation plan.
The following unadjusted accounts are taken from the records of Brown Corp. at December 31, 2019:
Bank Loan 201 Interest Expense 632 Interest Payable 222 12,000 200 100
Additional Information: The bank loan bears interest at 6% per year. It was obtained on April 1, 2019.
Payment in full is due on March 31, 2020.
Required: Prepare the adjusting entry at December 31, 2019
Answer:
Dr Interest expense $340
Cr Interest payable $340
Explanation:
Preparation of the adjusting entry at December 31, 2019
First step is to calculate the interest expense to be debited
Interest expense for 2019 $540
(12,000*6%*9/12)
Less Interest expense already debited ($200)
Interest expense to be debited $340
($540-$200)
Now let Prepare the journal entry
December 31, 2019
Dr Interest expense $340
Cr Interest payable $340
($540-$200)
(Being Interest expense recorded)
1. What is the purpose of a bank statement?
Answer:
to hold money on a account
Explanation:
Bank statements are a great tool to help account holders keep track of their money. They can help account holders track their finances, identify errors, and recognize spending habits.
Performance Products Corporation makes two products, titanium Rims and Posts. Data regarding the two products follow:
Direct Labor-Hours per unit Annual Production
Rims 0.80 29,000 units
Posts 0.80 73,000 units
Additional information about the company follows:
Rims require $20 in direct materials per unit, and Posts require $18.
The direct labor wage rate is $16 per hour.
Rims are more complex to manufacture than Posts and they require special equipment.
The ABC system has the following activity cost pools:
Estimated Activity
Activity Cost Pool Activity Measure Estimated
Overhead
Cost Rims Posts Total
Machine setups Number of setups $ 34,310 100 100 200
Special processing Machine-hours $ 113,150 1,000 0 1,000
General factory Direct labor-hours $ 1,218,000 4,000 83,000 87,000
Exercise 4-8 Part 2
2. Determine the unit product cost of each product according to the ABC system.
Unit product cost of Rims
Unit product cost of Posts
Answer and Explanation:
The computation of the unit product cost is shown below;
Particulars Rims Posts
Machine setups 17155 17155
(34310 ÷ 200 × 100)
Special processing 113150 0
General factory 56,000 1162000
(1218000 ÷ 87000 × 4000) (14 × 83000)
Total overhead 186305 1179155
Units 29000 73000
Overhead cost per unit 6.42 16.15
Direct material 20 18
Direct labor 12.8 12.80
(16 × .80)
Unit product cost 39.22 46.95
Compare: High Rate vs Snowball.
6. A standard repayment term for a home loan is 30 years, or 360 months. How long does it take you to repay your mortgage using this method?
Answer:
High Rate Vs Snowball
With this standard repayment of 30 years or 360 months, it means that it takes 30 years to repay the mortgage using the Snowball method and a shorter period (less than 30 years) to repay the mortgage using the High Rate method.
Explanation:
The Snowball method is a better method of repaying a loan. This method encourages paying off the loan with the smaller balance first instead of paying off the loan with the higher rate first. The only advantage of the High Rate method is that the loan is repaid quickly with less interest.
A machine makes three different components used in a gyroscope. Call these components A, B, and C. The following repeating schedule is used to make components: make 100 units of A, make 50 units of B, and then make 200 units of C. How many components are made in the production cycle
Answer:
350
Explanation:
Calculation for How many components are made in the production cycle
Components A 100 units
Components B 50 units
Components C 200 units
Total 350 components
Therefore How many components are made in the production cycle is 350 components
A trading company on April 30, paid BD 750,000 for a machine which can produce 1,400,000 units in 10 years life. The machine have a salvage value of BD 50,000 and produce 25,000 units in first year, 45,000 units in second year and 70,000 units in third year. Compute depreciation expense for the Second year assuming the company uses the unit production method. O A. 22500 O B. 35000 O C. 12500 O D. 15000
Answer: A. BD 22,500
Explanation:
First find the depreciation per unit:
= (Cost of machine -Salvage value) / Total units to be produced over lifetime
= (750,000 - 50,000) / 1,400,000
= BD 0.5 per unit
There are 45,000 units to be produced in the second year:
= 45,000 * 0.5
= BD 22,500
On January 1, 2020, Crane Company sold to Blossom Company $740000 of its 8% bonds for $655119 to yield 11%. Interest is payable semiannually on January 1 and July 1. What amount should Crane report as interest expense for the six months ended June 30, 2020? a) $36032 b) $26205 c) $40700 d) $29600
Answer:
a) $36032
Explanation:
The computation of the interest expense reported is shown below:
= BOnd value × rate of interest × given months ÷ total months
= $655,119 × 11% × 6 months ÷ 12 months
= $36,032
Hence, the amount that should be reported as interest expense is $36,032
Fuente, Inc., has identified an investment project with the following cash flows.
Year Cash Flow
1 $ 1,090
2 1,320
3 1,540
4 2,280
a. If the discount rate is 7 percent, what is the future value of these cash flows in Year 4? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
b. If the discount rate is 13 percent, what is the future value of these cash flows in Year 4? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
c. If the discount rate is 22 percent, what is the future value of these cash flows in Year 4? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
Answer:
.
Explanation:
.
Answer:
hhejsnbshs jsjsnbw hhsshbs jw
This chapter described various situations that emphasize the need for controls. In the first sce- nario presented, a furniture store sells merchandise on credit. Based on the descriptions of controls given in this chapter, identify the various controls that should be implemented in the furniture store system to ensure that corrections to customer bal- ances are made only by someone with the correct authorization. In the second scenario illustrating the need for controls, an accounts payable clerk uses the system to write checks to suppliers. Based on the information in this chapter, what kinds of controls would you implement to ensure that checks are written only to valid suppliers, that checks are written for the correct amount, and that all payouts have the required authorization
Answer:
First Scenario:
The furniture store should develop a system which helps keeps track for the purchases made on account. The system should keep track of invoices and payment due dates. The system should notify the team when the payment due date is near. The system should have controls for identifying duplicate payments.
Explanation:
Second Scenario:
The account payable clerk should keep track of all the invoices entered in the system. The system controls should be efficient so that there is no duplicate payment or missed payment. The system should notify the user when any duplicate invoice entering attempt is made. There should be authorization of invoices before they are entered in the system. The payment process should be segregated between 2 or more users so that there is less risk for fraud.