The image formed by a diverging lens when an object is located at its focal point is located at infinity.
When an object is located at the focal point of a diverging lens, the rays of light that pass through the lens emerge as parallel rays. This is because the diverging lens causes the light rays to spread out. Parallel rays of light are defined to be those that appear to originate from a point at infinity.
Since the rays of light are effectively parallel after passing through the diverging lens, they do not converge or diverge further to form a real image on any physical surface. Instead, the rays appear to come from a point at infinity, and this is where the virtual image is formed.
Therefore, the correct answer is c. At infinity.
To learn more about focal point click here:
brainly.com/question/32157159
#SPJ11
Does Archimedes’ principle tell us that if an immersed object
displaces 5 N of fluid, the buoyant force on the object is 5 N?.
Explain why.
Archimedes' principle tells us that if an immersed object displaces more than 100N of fluid, the buoyant force on the object is equal to the weight of the fluid displaced.
Therefore, if an object displaces 5 N of fluid, the buoyant force on the object will be less than 5 N.The reason for this is because the buoyant force is equal to the weight of the fluid displaced by the object. In other words, the weight of the fluid that is displaced by the object determines the buoyant force on the object. If the object is only displacing 5 N of fluid, then the buoyant force will be less than 5 N because the weight of the fluid displaced is less than 5 N.Archimedes' principle is important for understanding the behavior of objects in fluids.
It helps us to understand why objects float or sink and how the buoyant force on an object is related to the weight of the fluid displaced.
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
(a) A wire that is 1.50 m long at 20.0°C is found to increase in length by 1.90 cm when warmed t 420.0'C. Compute its average coefficient of linear expansion for this temperature range. (b) The wire i stretched just taut (zero tension) at 420.0*C. Find the stress in the wire if it is cooled to 20.0°C withou being allowed to contract. Young's modulus for the wire is 2.0 x 10^11 Pa.
(a) Thee average coefficient of linear expansion for this temperature range is approximately 3.17 x 10^(-5) / °C. (b) The stress in the wire, when cooled to 20.0°C without being allowed to contract, is approximately 2.54 x 10^3 Pa.
(a) The average coefficient of linear expansion (α) can be calculated using the formula:
α = (ΔL / L₀) / ΔT
Where ΔL is the change in length, L₀ is the initial length, and ΔT is the change in temperature.
Given that the initial length (L₀) is 1.50 m, the change in length (ΔL) is 1.90 cm (which is 0.019 m), and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
α = (0.019 m / 1.50 m) / 400.0°C
= 0.01267 / 400.0°C
= 3.17 x 10^(-5) / °C
(b) The stress (σ) in the wire can be calculated using the formula:
σ = E * α * ΔT
Where E is the Young's modulus, α is the coefficient of linear expansion, and ΔT is the change in temperature.
Given that the Young's modulus (E) is 2.0 x 10^11 Pa, the coefficient of linear expansion (α) is 3.17 x 10^(-5) / °C, and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
σ = (2.0 x 10^11 Pa) * (3.17 x 10^(-5) / °C) * 400.0°C
= 2.0 x 10^11 Pa * 3.17 x 10^(-5) * 400.0
= 2.54 x 10^3 Pa.
To learn more about the linear expansion, click here: https://brainly.com/question/32547144
#SPJ11
A uniform solid sphere of radius r = 0.420 m and mass m = 15.5 kg turns clockwise about a vertical axis through its center (when viewed from above), at an angular speed of 2.80 rad/s. What is its vector angular momentum about this axis?
The vector angular momentum of the solid sphere rotating about a vertical axis through its center is approximately 1.87 kg·m²/s.
To calculate the vector angular momentum of a solid sphere rotating about a vertical axis through its center, we can use the formula:
L = I * ω
where:
L is the vector angular momentum,
I is the moment of inertia, and
ω is the angular speed.
Given:
Radius of the solid sphere (r) = 0.420 m,
Mass of the solid sphere (m) = 15.5 kg,
Angular speed (ω) = 2.80 rad/s.
The moment of inertia for a solid sphere rotating about an axis through its center is given by:
I = (2/5) * m * r^2
Substituting the given values:
I = (2/5) * 15.5 kg * (0.420 m)^2
Now we can calculate the vector angular momentum:
L = I * ω
Substituting the calculated value of I and the given value of ω:
L = [(2/5) * 15.5 kg * (0.420 m)^2] * 2.80 rad/s
Calculating this expression gives:
L ≈ 1.87 kg·m²/s
Therefore, the vector angular momentum of the solid sphere rotating about a vertical axis through its center is approximately 1.87 kg·m²/s.
Learn more about angular momentum from the given link
https://brainly.com/question/4126751
#SPJ11
Transcribed image text: A rotating fan completes 1150 revolutions every minute. Consider the tip of the blade, at a radius of 120 cm. What is the linear distance moved when the tip moves through one revolution? What is the tip's speed and the magnitude of its acceleration? What is the period of the motion? Sebuah kipas yang berputar membuat 1150 putaran lengkap seminit. Pertimbangkan hujung bilah kipas, pada jejari 120 cm Berapakah jarak yang dibuat oleh hujung bilah kipas di dalam sutu putaran? Berapakah laju dan magnitud pecutan hujung bilah kipas? Berapakah tempoh gerakan? [16 marks / 16 markah] (a Light from a helium-neon laser (630 nm) is incident on a pair of slits. Interference pattern can be seen on a screen 2.0 m from the slits and the bright fringes are separated by 1.40 cm. What is the slit separation? A grating has 5000 lines per cm. Determine the angular separation between the central maximum and the second-order bright fringe if the wavelength of violet light is 410 nm. (b) (a) Cahaya dari helium-neon laser (630 nm) melalui sepasang celahan. Corak interferens dapat dilihat pada layar yang jauhnya 2.0 m dari celahan dan pinggir-pinggir terang dipisahkan sejauh 1.40 cm. Berapakah jarak pisahan antara celahan? Satu parutan mempunyai 5000 garisan per cm. Tentukan sudut pemisahan di antara pinggir terang pusat dengan pinggir terang tertib kedua jika panjang gelombang cahaya ungu ialah 410 nm. [16 marks / 16 markah] (b)
When the rotating fan completes one revolution, the tip of the blade moves a linear distance equal to the circumference of a circle with a radius of 120 cm. The tip's speed is the linear distance moved per unit of time, and its acceleration can be calculated using the formula for centripetal acceleration. The period of motion is the time taken for one complete revolution.
To find the linear distance moved by the tip of the blade in one revolution, we can use the formula for the circumference of a circle: C = 2πr, where r is the radius. Substituting the given radius of 120 cm, we have C = 2π(120 cm) = 240π cm.
The tip's speed is the linear distance moved per unit of time. Since the fan completes 1150 revolutions per minute, we can calculate the speed by multiplying the linear distance moved in one revolution by the number of revolutions per minute and converting to a consistent unit. Let's convert minutes to seconds by dividing by 60:
Speed = (240π cm/rev) * (1150 rev/min) * (1 min/60 s) = 4600π/3 cm/s.
To find the magnitude of the tip's acceleration, we can use the formula for centripetal acceleration: a = v²/r, where v is the speed and r is the radius. Substituting the given values, we have:
Acceleration = (4600π/3 cm/s)² / (120 cm) = 211200π²/9 cm/s².
The period of motion is the time taken for one complete revolution. Since the fan completes 1150 revolutions per minute, we can calculate the period by dividing the total time in minutes by the number of revolutions:
Period = (1 min)/(1150 rev/min) = 1/1150 min/rev.
In summary, when the fan completes one revolution, the tip of the blade moves a linear distance of 240π cm. The tip's speed is 4600π/3 cm/s, and the magnitude of its acceleration is 211200π²/9 cm/s². The period of motion is 1/1150 min/rev.
To know more about centripetal acceleration refer here:
https://brainly.com/question/32812920#
#SPJ11
A cockroach of mass m lies on the rim of a uniform disk of mass 7.00 m that can rotate freely about its center like a merry-go-round. Initially the cockroach and disk rotate together with an angular velocity of 0.200 rad. Then the cockroach walks halfway to the
center of the disk.
(a) What then is the angular velocity of the cockroach-disk system?
(b) What is the ratio K/Ko of the new kinetic energy of the system to its initial kinetic energy?
(a) The angular velocity of the cockroach-disk system after the cockroach walks halfway to the centre of the disk is 0.300 rad.
(b) The ratio K/Ko of the new kinetic energy of the system to its initial kinetic energy is 0.700.
When the cockroach walks halfway to the centre of the disk, it decreases its distance from the axis of rotation, effectively reducing the moment of inertia of the system. Since angular momentum is conserved in the absence of external torques, the reduction in moment of inertia leads to an increase in angular velocity. Using the principle of conservation of angular momentum, the final angular velocity can be calculated by considering the initial and final moments of inertia. In this case, the moment of inertia of the system decreases by a factor of 4, resulting in an increase in angular velocity to 0.300 rad.
The kinetic energy of a rotating object is given by the equation K = (1/2)Iω^2, where K is the kinetic energy, I is the moment of inertia, and ω is the angular velocity. Since the moment of inertia decreases by a factor of 4 and the angular velocity increases by a factor of 1.5, the ratio K/Ko of the new kinetic energy to the initial kinetic energy is (1/2)(1/4)(1.5^2) = 0.700. Therefore, the new kinetic energy is 70% of the initial kinetic energy.
To learn more about velocity, click here:
brainly.com/question/30559316
#SPJ11
"The horizontal line that accommodates points C and F of a
mirror:
A. Is its principal axis,
B. It changes with distance from the object,
C. It is a beam of light,
D. Has other point
The answer to the question is that the horizontal line that accommodates points C and F of a mirror is its principal axis.
The explanation is given below:
Mirror A mirror is a smooth and polished surface that reflects light and forms an image. Depending on the type of surface, the reflection can be regular or diffuse.
The shape of the mirror also influences the reflection. Spherical mirrors are the most common type of mirrors used in optics.
Principal axis of mirror: A mirror has a geometric center called its pole (P). The perpendicular line that passes through the pole and intersects the mirror's center of curvature (C) is called the principal axis of the mirror.
For a spherical mirror, the principal axis passes through the center of curvature (C), the pole (P), and the vertex (V). This axis is also called the optical axis.
Principal focus: The principal focus (F) is a point on the principal axis where light rays parallel to the axis converge after reflecting off the mirror. For a concave mirror, the focus is in front of the mirror, and for a convex mirror, the focus is behind the mirror. The distance between the focus and the mirror is called the focal length (f).
For a spherical mirror, the distance between the pole and the focus is half of the radius of curvature (r/2).
The horizontal line that accommodates points C and F of a mirror is its principal axis.
To learn more about principal visit;
https://brainly.com/question/30026819
#SPJ11
A spaceship, 230-m long for those on board, moves by the Earth at 0.955c. What is its length as measured by an earthbound observer
The length of the spaceship as measured by an earthbound observer is approximately 68.69 meters.
To calculate the length of the spaceship as measured by an earthbound observer, we can use the Lorentz transformation for length contraction:
L' = L × sqrt(1 - (v²/c²))
Where:
L' is the length of the spaceship as measured by the earthbound observer,
L is the proper length of the spaceship (230 m in this case),
v is the velocity of the spaceship relative to the earthbound observer (0.955c),
c is the speed of light.
Substituting the given values:
L' = 230 m × sqrt(1 - (0.955c)²/c²)
To simplify the calculation, we can rewrite (0.955c)² as (0.955)² × c²:
L' = 230 m × sqrt(1 - (0.955)² × c²/c²)
L' = 230 m × sqrt(1 - 0.911025)
L' = 230 m sqrt(0.088975)
L' = 230 m × 0.29828
L' = 68.69 m
Learn more about speed -
brainly.com/question/13943409
#SPJ11
6. A golf cart of 330Kg of mass moves horizontally and without
friction at 5m/s when
a 70Kg person originally at rest gets on the golf cart. What will
be the final speed
of the cart with the person?
The final speed of the golf cart with the person will be 4.26 m/s
Mass of golf cart = 330 kgMass of person = 70 kgTotal mass of the system, m = 330 + 70 = 400 kgInitial velocity of the golf cart, u = 5 m/sFinal velocity of the golf cart with the person, v = ?,
As per the law of conservation of momentum: Initial momentum of the system, p1 = m × u = 400 × 5 = 2000 kg m/sNow, the person gets on the golf cart. Hence, the system now becomes of 400 + 70 = 470 kg of mass.Let the final velocity of the system be v'.Then, the final momentum of the system will be: p2 = m × v' = 470 × v' kg m/sNow, as per the law of conservation of momentum:p1 = p2⇒ 2000 = 470 × v'⇒ v' = 2000/470 m/s⇒ v' = 4.26 m/s.
Therefore, the final velocity of the golf cart with the person will be 4.26 m/s. (rounded off to 2 decimal places).Hence, the final speed of the golf cart with the person will be 4.26 m/s (approximately).
Learn more on momentum here:
brainly.com/question/24030570
#SPJ11
(a) Write down the Klein-Gordon (KG) equation in configuration of space-time representation ? (b) What kind of particles does the equation describe? (4) Write down the quark content of the following particle und (a) proton (P) (b) Delta ∆++ c) Pion π- (d) Lambda ∆° (strangeness number = ad
e) Kaon K+ (strangeness number = +1)
(a) The Klein-Gordon equation in configuration space-time representation is:
∂²ψ/∂t² - ∇²ψ + (m₀c²/ħ²)ψ = 0.
(b) The Klein-Gordon equation describes scalar particles with spin 0.
(c) The quark content of the mentioned particles is as follows:
(a) Proton (P): uud.
(b) Delta ∆++: uuu.
(c) Pion π-: dū.
(d) Lambda ∆°: uds.
(e) Kaon K+: us.
(a) The Klein-Gordon (KG) equation in configuration space-time representation is given by:
∂²ψ/∂t² - ∇²ψ + (m₀c²/ħ²)ψ = 0,
where ψ represents the wave function of the particle, t represents time, ∇² is the Laplacian operator for spatial derivatives, m₀ is the rest mass of the particle, c is the speed of light, and ħ is the reduced Planck constant.
(b) The Klein-Gordon equation describes scalar particles, which have spin 0. These particles include mesons (pions, kaons) and hypothetical particles like the Higgs boson.
(c) The quark content of the particles mentioned is as follows:
(a) Proton (P): uud (two up quarks and one down quark)
(b) Delta ∆++: uuu (three up quarks)
(c) Pion π-: dū (one down antiquark and one up quark)
(d) Lambda ∆°: uds (one up quark, one down quark, and one strange quark)
(e) Kaon K+: us (one up quark and one strange quark)
In the quark content notation, u represents an up quark, d represents a down quark, s represents a strange quark, and ū represents an up antiquark. The number of subscripts indicates the electric charge of the quark.
Learn more about mesons:
https://brainly.com/question/13274788
#SPJ11
A particle with a velocity of 5.00x 10^3 m/s enters a region of
uniform magnetic fields. Calculate the magnitude and direction of
the electric field if the particle is to pass through the
undeflected.
The required magnitude and direction of the electric field to pass the particle undeflected is given by:|E| = 5.00 x 10³ x B (upwards)
A particle with a velocity of 5.00 x 10³ m/s enters a region of uniform magnetic fields. The magnitude and direction of the electric field if the particle is to pass through undeflected can be calculated through the following steps:
Step 1:Identify the given information
In the given problem, we are given:
Particle velocity, v = 5.00 x 10³ m/s
Magnetic field, B = given
Direction of magnetic field,
let’s assume it to be perpendicular to the plane of paper
Magnitude of electric field, E = to be calculated
Step 2:Find the magnetic force exerted on the particle
The magnetic force on the charged particle moving in a magnetic field is given by:
F = q(v x B) where,q is the charge on the particle
v is the velocity of the particle
B is the magnetic field acting on the particle
By the right-hand rule, it can be determined that the magnetic force, F acts perpendicular to the plane of the paper in this problem.
The direction of magnetic force can be found by the Fleming’s Left-hand rule. In this case, the particle is negatively charged as it is an electron. So the direction of force on the particle would be opposite to that of the direction of velocity of the particle in the magnetic field. Therefore, the magnetic force on the particle would be directed downwards as shown in the figure below.
Step 3: Find the electric field to counterbalance the magnetic force. In order to counterbalance the magnetic force on the electron, there must be an electric force acting on it as well. The electric force on the charged particle moving in an electric field is given by:
F = qE where, E is the electric field acting on the particle
By the right-hand rule, the direction of electric force on the particle can be found to be upwards in this case. Since the electron is undeflected, the magnetic force on it must be equal and opposite to the electric force on it. Hence,
q(v x B) = qE
Dividing by q, we get: v x B = E
Also, we know that the magnitude of the magnetic force on the particle is given by:
F = Bqv
where, v is the magnitude of velocity of the particle
Substituting the value of the magnetic force from this equation in the equation above, we get:
v x B = (Bqv)/qv = E
The magnitude of the electric field required to counterbalance the magnetic force is given by:
|E| = vB= 5.00 x 10³ x B
As we know the direction of the electric field is upwards, perpendicular to both the direction of the magnetic field and the velocity of the particle. Therefore, the required magnitude and direction of the electric field to pass the particle undeflected is given by:
|E| = 5.00 x 10³ x B (upwards)
The magnitude of the electric field required to counterbalance the magnetic force is given by |E| = 5.00 x 10³ x B (upwards).
Learn more about electric field https://brainly.com/question/19878202
#SPJ11
3/4 Points (a) Atanar show at tes directly toward the stands at a speed of 1130 kn, emitting a frequency of 60 H on a day when the speed of sound is 342 m/s. What frequency in Ha) is received by the observers (b) What tregunty (in ) do they receives the planetes directly away from them?
The frequency received by the observers is 55.78 Hz. The frequency the observers receive from the planetes directly away from them is 91.43 Hz.
(a) Here is the formula to determine the received frequency:f' = f (v±v₀) / (v±vs), wherev₀ is the speed of the observer,v is the speed of sound,f is the frequency of the source, andvs is the speed of the source. Here is the solution to part (a): The speed of sound is given as 342 m/s. Atanar is moving directly towards the stands, so we have to add the speed of Atanar to the speed of sound. The speed of Atanar is 1130 km/h, which is 313.8889 m/s when converted to m/s.v = 342 m/s + 313.8889 m/s = 655.8889 m/sUsing the formula,f' = f (v±v₀) / (v±vs),we get:f' = 60 Hz (655.8889 m/s) / (655.8889 m/s + 0 m/s)f' = 55.78 HzSo, the frequency received by the observers is 55.78 Hz.
(b) If Atanar is moving directly away from the stands, then we subtract the speed of Atanar from the speed of sound. Using the formula:f' = f (v±v₀) / (v±vs),we get:f' = 60 Hz (655.8889 m/s) / (655.8889 m/s - 0 m/s)f' = 91.43 Hz.Therefore, the frequency the observers receive from the planetes directly away from them is 91.43 Hz.
Learn more on frequency here:
brainly.com/question/33270290
#SPJ11
What is the wavelength of light in nm falling on double slits
separated by 2.20 µm if the third-order maximum is at an angle of
65.0°?
In the double-slit experiment, a coherent light source is shone through two parallel slits, resulting in an interference pattern on a screen. The interference pattern arises from the wave nature of light.
The term "wavelength" refers to the distance between two corresponding points on a wave, such as two adjacent peaks or troughs. In the context of the double-slit experiment, the "wavelength of light used" refers to the characteristic wavelength of the light source employed in the experiment.
To find the wavelength of light falling on double slits, we can use the formula for the path difference between the two slits:
d * sin(θ) = m * λ
Where:
d is the separation between the slits (2.20 µm = 2.20 × 10^(-6) m)
θ is the angle of the third-order maximum (65.0° = 65.0 × π/180 radians)
m is the order of the maximum (in this case, m = 3)
λ is the wavelength of light we want to find
We can rearrange the formula to solve for λ:
λ = (d * sin(θ)) / m
Plugging in the given values:
λ = (2.20 × 10⁻⁶ m) * sin(65.0 × π/180) / 3
Evaluating this expression gives us the wavelength of light falling on the double slits.
To know more about double slit experiment visit:
https://brainly.com/question/29381229
#SPJ11
A womanstands on a scale in a moving elevator. Her mass is 56.0 kg, and the combined mass of the elevator and scale is an additional 825 kg. Starting from rest, the elevator accelerates upward. During the acceleration, the hoisting cable applies a force of 9850 N. What does the scale read (in N) during the acceleration?
The scale reading during the acceleration is 150
Given data: Mass of woman, m1 = 56.0 kg
Mass of elevator and scale, m2 = 825 kg
Net force, F = 9850 N, Acceleration, a =?
The equation of motion for the elevator and woman is given as F = (m1 + m2) a
The net force applied to the system is equal to the product of the total mass and the acceleration of the system.
The elevator and woman move upwards so we will take the acceleration as positive.
F = (m1 + m2) a9850 = (56.0 + 825) a9850 = 881a a = 9850/881a = 11.17 m/s²
Now, the scale reading is equal to the normal force acting on the woman.
The formula to calculate the normal force is N = m1 where g is the acceleration due to gravity.
N = (56.0 kg) (9.8 m/s²)N = 549.8 N
When the elevator starts accelerating upward, the woman feels heavier than her actual weight.
The normal force is greater than the weight of the woman.
Thus, the scale reading will be the sum of the normal force and the force due to the acceleration of the system.
Scale reading during acceleration = N + m1 a
Scale reading during acceleration = 549.8 + (56.0 kg) (11.17 m/s²)
Scale reading during acceleration = 1246.8 N
Therefore, the scale reading during the acceleration is 150
Learn more about scale reading from the given link,
https://brainly.com/question/30623159
#SPJ11
An object is recognized even if its orientation changes pertains to what aspect of object perception? OA. Figure and ground B. Whole and part
C. Shape and orientation
The recognition of an object even when its orientation changes pertains to the aspect of object perception known as shape and orientation.
Perception is a cognitive process in which we interpret sensory information in the environment. Perception enables us to make sense of our world by identifying, organizing, and interpreting sensory information.
Perception involves multiple processes that work together to create an understanding of the environment. The first process in perception is sensation, which refers to the detection of sensory stimuli by the sensory receptors.
The second process is called attention, which involves focusing on certain stimuli and ignoring others. The third process is organization, in which we group and organize sensory information into meaningful patterns. Finally, perception involves interpretation, in which we assign meaning to the patterns of sensory information that we have organized and grouped.
Shape and orientation is an important aspect of object perception. It enables us to recognize objects regardless of their orientation. For example, we can recognize a chair whether it is upright or upside down. The ability to recognize an object regardless of its orientation is known as shape constancy.
This ability is important for our survival, as it enables us to recognize objects in different contexts. Thus, the recognition of an object even if its orientation changes pertains to the aspect of object perception known as shape and orientation.
Learn more about cognitive process at: https://brainly.com/question/7272441
#SPJ11
A 5-kg object is moving in a x−y plane. At time t=0, the box crosses the origin travelling with the speed of 9 m/s in the +x direction. It is subjected to a conservative force, which hast the following potential energy function associated with it: U(x,y)=60y−4x 2
+125 (units have been omitted, you can assume putting x and y in meters gives U in joules) The forces acts on the box for exactly one second, at which time it has moved to a position given by the coordinates x=11.6 m and y=−6.0 m. 4.1: (5 points) Find the speed of the object at the end of the one-second interval. 4.2: (5 points) Find the acceleration of the object at the end of the one-second interval. Express your answer in terms of magnitude and direction.
4.1: The speed of the object at the end of the one-second interval is 12 m/s.
4.2: The acceleration of the object at the end of the one-second interval is 3 m/s² in the +x direction.
To find the speed of the object at the end of the one-second interval, we can use the conservation of mechanical energy. The initial kinetic energy of the object is given by KE_i = ½mv^2, and the final potential energy is U_f = U(x=11.6, y=-6.0). Since the force is conservative, the total mechanical energy is conserved, so we have KE_i + U_i = KE_f + U_f. Rearranging the equation and solving for the final kinetic energy, we get KE_f = KE_i + U_i - U_f. Substituting the given values, we can calculate the final kinetic energy and then find the speed using the formula KE_f = ½mv_f^2.
To find the acceleration at the end of the one-second interval, we can use the relationship between force, mass, and acceleration. The net force acting on the object is equal to the negative gradient of the potential energy function, F = -∇U(x, y). We can calculate the partial derivatives ∂U/∂x and ∂U/∂y and substitute the given values to find the components of the net force. Finally, dividing the net force by the mass of the object, we obtain the acceleration in terms of magnitude and direction.
To know more about acceleration click here:
https://brainly.com/question/12550364
#SPJ11
How much input force is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8?
An input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8.
The mechanical advantage of a simple machine is defined as the ratio of the output force to the input force. Therefore, to find the input force required to extract an output force of 500 N from a simple machine with a mechanical advantage of 8, we can use the formula:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
Rearranging the formula to solve for the input force, we get:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Substituting the given values, we have:
IF = 500 N / 8IF = 62.5 N
Therefore, an input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8. This means that the machine amplifies the input force by a factor of 8 to produce the output force.
This concept of mechanical advantage is important in understanding how simple machines work and how they can be used to make work easier.
To know more about input force, visit:
https://brainly.com/question/28919004
#SPJ11
To extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
Mechanical advantage is defined as the ratio of output force to input force.
The formula for mechanical advantage is:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
In order to determine the input force required, we can rearrange the formula as follows:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Now let's plug in the given values:
Output Force (OF) = 500 N
Mechanical Advantage (MA) = 8
Input Force (IF) = 500 N / 8IF = 62.5 N
Therefore, extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
To know more about force, visit:
https://brainly.com/question/30526425
#SPJ11
2) A gas with initial state variables p,, V, and T, expands isothermally until V2 = 2V 1 a) What is the value for T? b) What about p2? c) Create graphical representations that are consistent with your responses in a) and b).
This is consistent with the answer to part b).
a) The value for T remains constant.
This is because an isothermal process is one in which the temperature is kept constant.
b) The value for p2 decreases.
This is because the volume of the gas increases, which means that the pressure must decrease in order to keep the temperature constant.
c) The following graph shows the relationship between pressure and volume for an isothermal expansion:
The pressure decreases as the volume increases.
This is consistent with the answer to part b).
Learn more about consistent with the given link,
https://brainly.com/question/15654281
#SPJ11
The propulsion system of DS-1 works by ejecting high-speed argon ions out thr rear of the engine. the engine slowly increases the velocity of DS-1 by about +9.31 m/s per day. (a) how many days will it take to increase the velocity of DS-1 by +3370 m/s? (b) what is the acceleration of DS-1?
NASA has developed Deep-Space 1 (DS-1), a spacecraft that is scheduled to rendezvous with the asteriod named 1992 KD (which orbits the sun millions of miles from earth). The propulsion system of DS-1 works by ejecting high-speed argon ions out the rear of the engine. The engine slowly increases the velocity of DS-1 by about + 9.31 m/s per day. (a) How many days will it take to increase the velocity of DS-1 by + 3370 m/s ? (b) What is the acceleration of DS-1?
to summarize (a) To calculate the number of days required to increase the velocity of DS-1 by +3370 m/s, we divide the desired change in velocity by the daily velocity increase. The result is approximately 362.32 days.
(b) The acceleration of DS-1 can be determined by dividing the daily velocity increase by the time it takes to achieve that increase. Therefore, the acceleration is approximately +9.31 m/s².
(a) The propulsion system of DS-1 increases its velocity by +9.31 m/s per day. To find the number of days required to increase the velocity by +3370 m/s, we divide the desired change in velocity by the daily velocity increase: 3370 m/s ÷ 9.31 m/s per day ≈ 362.32 days. Therefore, it would take approximately 362.32 days to achieve a velocity increase of +3370 m/s.
(b) The acceleration of DS-1 can be calculated by dividing the daily velocity increase by the time it takes to achieve that increase. From the given information, we know that the daily velocity increase is +9.31 m/s per day. Since acceleration is the rate of change of velocity with respect to time, we divide the daily velocity increase by one day: 9.31 m/s per day ÷ 1 day = +9.31 m/s². Therefore, the acceleration of DS-1 is approximately +9.31 m/s²
learn more about the propulsion system here:
https://brainly.com/question/32222856
#SPJ11
A series RLC Circuit has resonance angular frequency 2.00x10³ rad/s. When it is operating at some input frequency, XL=12.0Ω and XC=8.00Ω . (c). If it is possible, find L and C. If it is not possible, give a compact expression for the condition that L and C must satisfy..
For the given conditions, the values of L and C are L = 6.00 mH and C = 6.25 μF (microfarads), respectively.
To find the values of L (inductance) and C (capacitance) for the given series RLC circuit, we can use the resonance angular frequency (ω) and the values of XL (inductive reactance) and XC (capacitive reactance). The condition for resonance in a series RLC circuit is given by:
[tex]X_L = X_C[/tex]
Using the formula for inductive reactance [tex]X_L[/tex] = ωL and capacitive reactance [tex]X_C[/tex] = 1/(ωC), we can substitute these values into the resonance condition:
ωL = 1/(ωC)
Rearranging the equation, we have:
L = 1/(ω²C)
Now we can substitute the given values:
[tex]X_L[/tex] = 12.0 Ω
[tex]X_C[/tex] = 8.00 Ω
Since [tex]X_L[/tex] = ωL and [tex]X_C[/tex] = 1/(ωC), we can write:
ωL = 12.0 Ω
1/(ωC) = 8.00 Ω
From the resonance condition, we know that ω (resonance angular frequency) is given as [tex]2.00 * 10^3[/tex] rad/s.
Substituting ω = [tex]2.00 * 10^3[/tex] rad/s into the equations, we get:
[tex](2.00 * 10^3) L = 12.0[/tex]
[tex]1/[(2.00 * 10^3) C] = 8.00[/tex]
Solving these equations will give us the values of L and C:
L = 12.0 / [tex](2.00 * 10^3)[/tex] Ω = [tex]6.00 * 10^{-3[/tex] Ω = 6.00 mH (millihenries)
C = 1 / [[tex](2.00 * 10^3)[/tex] × 8.00] Ω = [tex]6.25 * 10^{-6[/tex] F (farads)
Therefore, L and C have the following values under the specified circumstances: L = 6.00 mH and C = 6.25 F (microfarads), respectively.
Learn more about angular frequency on:
https://brainly.com/question/30897061
#SPJ4
The resonance angular frequency of a series RLC circuit is given as 2.00x10³ rad/s. At this frequency, the reactance of the inductor (XL) is 12.0Ω and the reactance of the capacitor (XC) is 8.00Ω.
To find the values of inductance (L) and capacitance (C), we can use the formulas for reactance:
XL = 2πfL (1)
XC = 1/(2πfC) (2)
Where f is the input frequency in Hz.
By substituting the given values, we have:
12.0Ω = 2π(2.00x10³)L (3)
8.00Ω = 1/(2π(2.00x10³)C) (4)
Now, let's solve equations (3) and (4) for L and C.
From equation (3):
L = 12.0Ω / (2π(2.00x10³)) (5)
From equation (4):
C = 1 / (8.00Ω * 2π(2.00x10³)) (6)
Using these equations, we can calculate the values of L and C. It is possible to find L and C using these equations. The inductance (L) is equal to 9.54x10⁻⁶ H (Henry), and the capacitance (C) is equal to 1.97x10⁻⁵ F (Farad).
Finnish saunas can reach temperatures as high as 130 - 140 degrees Celcius - which extreme sauna enthusiasts can tolerate in short bursts of 3 - 4 minutes. Calculate the heat required to convert a 0.8 kg block of ice, brought in from an outside temperature of -8 degrees Celcius, to steam at 104.0 degrees Celcius in the sauna. [The specific heat capacity of water vapour is 1.996 kJ/kg/K; see the lecture notes for the other specific heat capacities and specific latent heats].
To calculate heat required to convert a 0.8 kg block of ice to steam at 104.0 degrees Celsius in a sauna, we need to consider stages of phase change and specific heat capacities and specific latent heats involved.
First, we need to calculate the heat required to raise the temperature of the ice from -8 degrees Celsius to its melting point at 0 degrees Celsius. The specific heat capacity of ice is 2.09 kJ/kg/K. The equation for this heat transfer is:
Q1 = mass * specific heat capacity * temperature change
Q1 = 0.8 kg * 2.09 kJ/kg/K * (0 - (-8)) degrees Celsius. Next, we calculate the heat required to melt the ice at 0 degrees Celsius. The specific latent heat of fusion for ice is 334 kJ/kg. The equation for this heat transfer is:
Q2 = mass * specific latent heat
Q2 = 0.8 kg * 334 kJ/kg
After the ice has melted, we need to calculate the heat required to raise the temperature of the water from 0 degrees Celsius to 100 degrees Celsius. The specific heat capacity of water is 4.18 kJ/kg/K. The equation for this heat transfer is:
Q3 = mass * specific heat capacity * temperature change
Q3 = 0.8 kg * 4.18 kJ/kg/K * (100 - 0) degrees Celsius
Finally, we calculate the heat required to convert the water at 100 degrees Celsius to steam at 104.0 degrees Celsius. The specific latent heat of vaporization for water is 2260 kJ/kg. The equation for this heat transfer is:
Q4 = mass * specific latent heat
Q4 = 0.8 kg * 2260 kJ/kg
The total heat required is the sum of Q1, Q2, Q3, and Q4:
Total heat = Q1 + Q2 + Q3 + Q4
Calculating these values will give us the heat required to convert the ice block to steam in the sauna.
To learn more about specific latent heats click here : brainly.com/question/30460917
#SPJ11
A sound wave is modeled as AP = 2.09 Pa sin(51.19 m 1 .3 – 17405 s ..t). What is the maximum change in pressure, the wavelength, the frequency, and the speed of the sound wave?
The maximum change in pressure is 2.09 Pa, the wavelength is approximately 0.123 m, the frequency is around 2770.4 Hz, and the speed of the sound wave is approximately 340.1 m/s.
To determine the maximum change in pressure, we can look at the amplitude of the wave. In the given model, the amplitude (A) is 2.09 Pa, so the maximum change in pressure is 2.09 Pa.
Next, let's find the wavelength of the sound wave. The wavelength (λ) is related to the wave number (k) by the equation λ = 2π/k. In this case, the wave number is given as 51.19 m^(-1), so we can calculate the wavelength using [tex]\lambda = 2\pi /51.19 m^{-1} \approx 0.123 m[/tex].
The frequency (f) of the sound wave can be determined using the equation f = ω/2π, where ω is the angular frequency. From the given model, we have ω = 17405 s⁻¹, so the frequency is
[tex]f \approx 17405/2\pi \approx 2770.4 Hz[/tex].
Finally, the speed of the sound wave (v) can be calculated using the equation v = λf. Plugging in the values we get,
[tex]v \approx 0.123 m \times 2770.4 Hz \approx 340.1 m/s[/tex].
Learn more about wavelength here:
https://brainly.com/question/30532991
#SPJ11
If the food has a total mass of 1.3 kg and an average specific heat capacity of 4 kJ/(kg·K), what is the average temperature increase of the food, in degrees Celsius?
If the food has a total mass of 1.3 kg and an average specific heat capacity of 4 kJ/(kg·K), 1.25°C is the average temperature increase of the food, in degrees Celsius?
The equation for specific heat capacity is C = Q / (m T), where C is the substance's specific heat capacity, Q is the energy contributed, m is the substance's mass, and T is the temperature change.
The overall mass in this example is 1.3 kg, and the average specific heat capacity is 4 kJ/(kgK). We are searching for the food's typical temperature increase in degrees Celsius.
Let's assume that the food's original temperature is 20°C. The food's extra energy can be determined as follows:
Q = m × C × ΔT where Q is the extra energy, m is the substance's mass, C is its specific heat capacity, and T is the temperature change.
Q=1.3 kg*4 kJ/(kg*K)*T
Q = 5.2 ΔT kJ
Further, the temperature change can be calculated as follows:
ΔT = Q / (m × C)
T = 5.2 kJ / (1.3 kg x 4 kJ / (kg x K))
ΔT = 1.25 K
Hence, the food's average temperature increase is 1.25°C.
Learn more about Average Temperature at
brainly.com/question/28041542
#SPJ4
3) A Cell whose internal resistance 1s 0.52 delivers a Current of LA to an external register. The lost voltage of the cell 12
Answer: I had they same qustion
Explanation:
3. (4 points) A dog chewed a smoke detector into pieces and swallowed its Am-241 radioactive source. The source has an activity of 37 kBq primarily composed of alpha particles with an energy of 5.486 MeV per decay. A tissue mass of 0.25 kg of the dog's intestine completely absorbed the alpha particle energy as the source traveled through his digestive tract. The source was then "passed" in the dog's feces after 12 hours. Assume that the RBE for an alpha particle is 10. Calculate: a) the total Absorbed Energy expressed in the correct units b) the Absorbed Dose expressed in the correct units c) the Dose Equivalent expressed in the correct units d) the ratio of the dog's Dose Equivalent to the recommended annual human exposure
a) Total Absorbed Energy:
The absorbed energy is the product of the activity (in decays per second) and the energy per decay (in joules). We need to convert kilobecquerels to becquerels and megaelectronvolts to joules.
Total Absorbed Energy = Activity × Energy per decay
Total Absorbed Energy ≈ 3.04096 × 10^(-6) J
b) Absorbed Dose:
The absorbed dose is the absorbed energy divided by the mass of the tissue.
Absorbed Dose = Total Absorbed Energy / Tissue Mass
Absorbed Dose = 3.04096 × 10^(-6) J / 0.25 kg
Absorbed Dose = 12.16384 μGy (since 1 Gy = 1 J/kg, and 1 μGy = 10^(-6) Gy)
c) Dose Equivalent:
The dose equivalent takes into account the relative biological effectiveness (RBE) of the radiation. We multiply the absorbed dose by the RBE value for alpha particles.
Dose Equivalent = 121.6384 μSv (since 1 Sv = 1 Gy, and 1 μSv = 10^(-6) Sv)
Ratio = Dose Equivalent (Dog) / Recommended Annual Human Exposure
Ratio = 121.6384 μSv / 1 mSv
Ratio = 0.1216384
Therefore, the ratio of the dog's dose equivalent to the recommended annual human exposure is approximately 0.1216384.
Learn more about energy here : brainly.com/question/1932868
#SPJ11
You accidentally knocked over your coffee mug you precariously set at the edge of your table while video chatting with a friend, causing it to fall from rest to the ground. You tried to catch it but failed. You claimed to your friend that the mug only took 0.25 seconds to fall, thus making it impossible for you to catch. How tall would your table be if your claim were true? Ignore air drag or any rotation of your mug. Hint: You may assume final position to be zero.
If we assume the mug took 0.25 seconds to fall and ignore air drag and rotation, we can calculate the height of the table. By using the equation of motion for free fall, we can solve for the height given the time of fall.
The equation of motion for free fall without air drag is given by:
h = (1/2) * g * t^2,
where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time.
Since the mug fell for 0.25 seconds, we can plug in this value into the equation and solve for h:
h = (1/2) * (9.8 m/s^2) * (0.25 s)^2.
Evaluating this expression will give us the height of the table if the mug fell for 0.25 seconds without any air drag or rotation.
To learn more about equation of motion click here : brainly.com/question/31314651
#SPJ11
Mark all the options that are true a. There is only movement when there is force b. The greater the force, the greater the acceleration C. Force and velocity always point in the same direction d. If t
The true statements among the given options are:
b. The greater the force, the greater the acceleration.
d. If the force is zero, the speed is constant. Option B and D are correct
a. There is only movement when there is force: This statement is not entirely true. According to Newton's first law of motion, an object will remain at rest or continue moving with a constant velocity (in a straight line) unless acted upon by an external force. So, in the absence of external forces, an object can maintain its state of motion.
b. The greater the force, the greater the acceleration: This statement is true. According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. Therefore, increasing the force applied to an object will result in a greater acceleration.
c. Force and velocity always point in the same direction: This statement is not true. The direction of force and velocity can be the same or different depending on the specific situation. For example, when an object is thrown upward, the force of gravity acts downward while the velocity points upward.
d. If the force is zero, the speed is constant: This statement is true. When the net force acting on an object is zero, the object will continue to move with a constant speed in a straight line. This is based on Newton's first law of motion, also known as the law of inertia.
e. Sometimes the speed is zero even if the force is not: This statement is true. An object can have zero speed even if a force is acting on it. For example, if a car experiences an equal and opposite force of friction, its speed can decrease to zero while the force is still present.
Therefore, Option B and D are correct.
Complete Question-
Mark all the options that are true:
a. There is only movement when there is force
b. The greater the force, the greater the acceleration
c. Force and velocity always point in the same direction
d. If the force is zero, the speed is constant.
e. Sometimes the speed is zero even if the force is not
To know more about acceleration, click here-
brainly.com/question/2303856
#SPJ11
6 A speedometer estimates linear speed based on angular speed of tires. If you switch to speed. larger tires, then the speedometer will read a lower linear speed than the true linear 7. Two spheres have the same mass and radius but one is hollow. If you roll both of them from the same height, the hollow one reaches to the ground later. 8. Two disks spin with the same angular momentum, but disk 1 has more Kinetic Energy than disk 2. Disk two has a larger moment of inertia. 9. You hold a spinning bicycle wheel while standing on a turntable. If you flip the wheel over, the turntable will move in the same direction. 10. If you used 5000 joules to throw a ball, it would travel faster if you threw in such a way that it is rotating
6. When switching to larger tires, the speedometer will display a lower linear speed than the true linear speed. This is because larger tires have a greater circumference, resulting in each revolution covering a longer distance compared to the original tire size.
The speedometer is calibrated based on the original tire size and assumes a certain distance per revolution. As a result, with larger tires, the speedometer underestimates the actual linear speed.
7. Two spheres with the same mass and radius are rolled from the same height. The hollow sphere reaches the ground later than the solid sphere. This is due to the hollow sphere having less mass and, consequently, less inertia. It requires less force to accelerate the hollow sphere compared to the solid sphere. As a result, the hollow sphere accelerates slower and takes more time to reach the ground.
8. Two disks with the same angular momentum are compared, but disk 1 has more kinetic energy than disk 2. Disk 2 has a larger moment of inertia, which is a measure of the resistance to rotational motion. The disk with greater kinetic energy has a higher velocity than the disk with lower kinetic energy. While both disks possess the same angular momentum, their different moments of inertia contribute to the difference in kinetic energy.
9. When a spinning bicycle wheel is flipped over while standing on a turntable, the turntable moves in the same direction. This phenomenon is explained by the conservation of angular momentum. Flipping the wheel changes its angular momentum, and to conserve angular momentum, the turntable moves in the opposite direction to compensate for the change.
10. If a ball is thrown with 5000 joules of energy and it is rotating, it will travel faster. The conservation of angular momentum states that when the net external torque acting on a system is zero, angular momentum is conserved. As the ball is thrown with spin, it possesses angular momentum that remains constant. The rotation of the ball does not affect its forward velocity, which is determined by the initial kinetic energy. However, the rotation influences the trajectory of the ball.
To learn more about speedometer, you can visit the following link:
brainly.com/question/32573142
#SPJ11
Discuss concept of mass conservation and Bernoulli Equation"
The concept of mass conservation and the Bernoulli equation are fundamental principles in fluid mechanics, which describe the behavior of fluids (liquids and gases).
1. Mass Conservation:
Mass conservation, also known as the continuity equation, states that mass is conserved within a closed system. In the context of fluid flow, it means that the mass of fluid entering a given region must be equal to the mass of fluid leaving that region.
Mathematically, the mass conservation equation can be expressed as:
[tex]\[ \frac{{\partial \rho}}{{\partial t}} + \nabla \cdot (\rho \textbf{v}) = 0 \][/tex]
where:
- [tex]\( \rho \)[/tex] is the density of the fluid,
- [tex]\( t \)[/tex] is time,
- [tex]\( \textbf{v} \)[/tex] is the velocity vector of the fluid,
- [tex]\( \nabla \cdot \)[/tex] is the divergence operator.
This equation indicates that any change in the density of the fluid with respect to time [tex](\( \frac{{\partial \rho}}{{\partial t}} \))[/tex] is balanced by the divergence of the mass flux [tex](\( \nabla \cdot (\rho \textbf{v}) \))[/tex].
In simpler terms, mass cannot be created or destroyed within a closed system. It can only change its distribution or flow from one region to another.
2. Bernoulli Equation:
The Bernoulli equation is a fundamental principle in fluid dynamics that relates the pressure, velocity, and elevation of a fluid in steady flow. It is based on the principle of conservation of energy along a streamline.
The Bernoulli equation can be expressed as:
[tex]\[ P + \frac{1}{2} \rho v^2 + \rho g h = \text{constant} \][/tex]
where:
- [tex]\( P \)[/tex] is the pressure of the fluid,
- [tex]\( \rho \)[/tex] is the density of the fluid,
- [tex]\( v \)[/tex] is the velocity of the fluid,
- [tex]\( g \)[/tex] is the acceleration due to gravity,
- [tex]\( h \)[/tex] is the height or elevation of the fluid above a reference point.
According to the Bernoulli equation, the sum of the pressure energy, kinetic energy, and potential energy per unit mass of a fluid remains constant along a streamline, assuming there are no external forces (such as friction) acting on the fluid.
The Bernoulli equation is applicable for incompressible fluids (where density remains constant) and under certain assumptions, such as negligible viscosity and steady flow.
This equation is often used to analyze and predict the behavior of fluids in various applications, including pipe flow, flow over wings, and fluid motion in a Venturi tube.
It helps in understanding the relationship between pressure, velocity, and elevation in fluid systems and is valuable for engineering and scientific calculations involving fluid dynamics.
Thus, the concepts of mass conservation and the Bernoulli equation provide fundamental insights into the behavior of fluids and are widely applied in various practical applications related to fluid mechanics.
Know more about Bernoulli equation:
https://brainly.com/question/29865910
#SPJ4
The concept of mass conservation and Bernoulli's equation are two of the fundamental concepts of fluid mechanics that are crucial for a thorough understanding of fluid flow.
In this context, it is vital to recognize that fluid flow can be defined in terms of its mass and energy. According to the principle of mass conservation, the mass of a fluid that enters a system must be equal to the mass that exits the system. This principle is significant because it means that the total amount of mass in a system is conserved, regardless of the flow rates or velocity of the fluid. In contrast, Bernoulli's equation describes the relationship between pressure, velocity, and elevation in a fluid. In essence, Bernoulli's equation states that as the velocity of a fluid increases, the pressure within the fluid decreases, and vice versa. Bernoulli's equation is commonly used in fluid mechanics to calculate the pressure drop across a pipe or to predict the flow rate of a fluid through a system. In summary, the concepts of mass conservation and Bernoulli's equation are two critical components of fluid mechanics that provide the foundation for a thorough understanding of fluid flow. By recognizing the relationship between mass and energy, and how they are conserved in a system, engineers and scientists can accurately predict fluid behavior and design effective systems to control fluid flow.
Learn more about Bernoulli's equation
https://brainly.com/question/29865910
#SPJ11
An RLC series circuit has a 3 Q resistor, a 354 mH inductor, and a 17.7 uF capacitor. If this is connected to a 178 Volt power supply, what will the rms current be at 362 Hz? Express your answer in mA
The rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A. To calculate the rms current in an RLC series circuit, then, we can divide the voltage (V) by the impedance (Z) to obtain the rms current (I).
The impedance of an RLC series circuit is given by the formula:
Z = √(R^2 + (XL - XC)^2)
Where:
R = Resistance = 3 Ω
XL = Inductive Reactance = 2πfL
XC = Capacitive Reactance = 1/(2πfC)
f = Frequency = 362 Hz
L = Inductance = 354 mH = 354 × 10^(-3) H
C = Capacitance = 17.7 μF = 17.7 × 10^(-6) F
Let's calculate the values:
XL = 2πfL = 2π(362)(354 × 10^(-3)) ≈ 1.421 Ω
XC = 1/(2πfC) = 1/(2π(362)(17.7 × 10^(-6))) ≈ 498.52 Ω
Now we can calculate the impedance:
Z = √(R^2 + (XL - XC)^2)
= √(3^2 + (1.421 - 498.52)^2)
≈ √(9 + 247507.408)
≈ √247516.408
≈ 497.51 Ω
Finally, we can calculate the rms current:
I = V / Z
= 178 / 497.51
≈ 0.358 A (rounded to three decimal places)
Therefore, the rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A.
Learn more about frequency here:
brainly.com/question/29739263
#SPJ11
A student measured the mass of a meter stick to be 150 gm. The student then placed a knife edge on 30-cm mark of the stick. If the student placed a 500-gm weight on 5-cm mark and a 300-gm weight on somewhere on the meter stick, the meter stick then was balanced. Where (cm mark) did the student place the 300- gram weight?
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
Given data:A student measured the mass of a meter stick to be 150 gm.
A knife edge was placed on 30-cm mark of the stick.
A 500-gm weight was placed on 5-cm mark and a 300-gm weight was placed somewhere on the meter stick. The meter stick was balanced.
Let's assume that the 300-gm weight is placed at x cm mark.
According to the principle of moments, the moment of the force clockwise about the fulcrum is equal to the moment of force anticlockwise about the fulcrum.
Now, the clockwise moment is given as:
M1 = 500g × 5cm
= 2500g cm
And, the anticlockwise moment is given as:
M2 = 300g × (x - 30) cm
= 300x - 9000 cm (Because the knife edge is placed on the 30-cm mark)
According to the principle of moments:
M1 = M2 ⇒ 2500g cm
= 300x - 9000 cm⇒ 2500
= 300x - 9000⇒ 300x
= 2500 + 9000⇒ 300x
= 11500⇒ x = 11500/300⇒ x
= 38.33 cm
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
To know more about student visit;
brainly.com/question/28047438
#SPJ11