An open pipe is 1.42 m long
What fundamental frequency
does it produce?
(Speed of sound = 343 m/s)
(Unit = Hz)

Answer: Dynamic balance

Explanation: Dynamic balance movements are movements in which constant agonist-antagonist muscle contractions occur in order to maintain a certain position or posture. ISSA pg 121

During the "waxing" phases, the two weeks immediately following the New Moon.

New Moon ==> waxing crescent ==> First Quarter ==> waxing gibbous ==> Full Moon

The phase of the moon decides the moon's visibility. The sequence of phases does the moon's visibility increases is; the waxing crescent, first quarter, waxing gibbous, full Moon.

The moon changes shape every day. This is due to the fact that the celestial body has no light of its own and can only reflect sunlight.

Only the side of the moon facing the sun can reflect this light and seem bright. The opposite side appears black. this is a full moon.

We can only see the black section when it lies between the sun and the earth when a new moon occurs. We witness intermediate phases like a half-moon and crescent in between these two extremes.

Following are the sequence of phases does the moon's visibility increase is;

1. Waxing crescent

2. First Quarter

3. Waxing gibbous

4. Full Moon

The phase of the moon decides the moon's visibility. Hence the visibility changes with the change in the phase of the moon.

To learn more about the moon's phase refer to the link;

https://brainly.com/question/2285324

Answer:

2.2 ma

Explanation:

Given :

Length of the rope = L

Mass of the rope = m

Mass of the object pulled by the rope = M

M = 1.5 m

So, L [tex]$\rightarrow$[/tex] m

For unit length [tex]$\rightarrow \frac{m}{L}$[/tex]

∴ 0.3 L = [tex]$0.3 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.3 m

And for remaining 0.7 L =  [tex]$0.7 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.7 m

By Newtons law of motion,

F - T = ( 0.3 m) a .........(1)

T = ( M + 0.7 m) a

T = ( 1.5 m + 0.7 m) a

T = ( 2.2 m ) a  ..............(2)

So from equation (1) and (2), we have

Tension on the rope

T = 2.2 ma

Answer: Option b, the final velocity is half of the initial velocity.

Explanation:

Here we will use the conservation of the total momentum of a system.

This means that the total momentum at the beginning must be the same as the final momentum.

Where momentum is:

P = M*v

Initially, we have two cars, both with the same mass M, and only one of them has a velocity v.

Then the initial momentum is:

P = M*v + M*0 = M*v

After the collision, the two cars move together. Then the total mass that is moving is equal to the sum of the masses of the cars, this is 2*M

and we can suppose that the two cars move at a final velocity v'

Then the final momentum is:

P' = (2*M)*v'

Now we use the conservation of momentum, then:

P = P'

M*v = (2*M)*v'

Now we need to solve this for v'

(M*v)/(2*M) = v'

v/2 = v'

This means that the final velocity is half of the initial velocity.

Then the correct option is option b.

Answer:

The correct answer is - 1240 newtons; 278.763 lbs.

Explanation:

Answer:

The first scenario!

Explanation:

W=F*d

a) 55*8= 440J

b) 60*6= 360J

c) 50*5= 250J

d) 40*10= 400J

The scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.

Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;

W = F × d

Where F is force applied and d is distance travelled.

From the question;

A force of 55 N moves it 8 m

W = 55N×8m = 440N.m

A force of 60 N moves it 6 m.

W = 60N×6m = 360N.m

A force of 50 N moves it 5 m.

W = 50N×5m = 250N

A force of 40 N moves it 10 m.

W = 40N×10m = 400N.m

Therefore, the scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.

Learn more about work done: brainly.com/question/26115962

#SPJ2

Answer:Mass of the body = 20 kg.

Final Velocity = 5.8 m/s.

Initial velocity = 0

Time = 3 seconds.  

Using the Formula,  

Acceleration = (v - u)/ t

= (5.8 - 0)/ 3

= 1.6 m /s².

Now, Using the Formula,  

Force = mass × acceleration

= 20 × 1.6

=

Explanation: I REALLY  HOPE THIS HELPS I'M KINDA NEW AT THIS :] :]

The magnitude of requires force, that is exerted on a 20 kg mass to give it an acceleration of 10.0 m/s^2 is 200 Newton.

The definition of force in physics is: The push or pull on a mass-containing item changes its velocity.

An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.

Given parameters:

Mass of the object: m = 20 kg.

Acceleration of the object: a = 10.0 m/s^2.

Hence, according to Newton's 2nd law of motion:

the magnitude of requires force = mass ×acceleration

= 20 × 10 Newton

= 200 Newton.

Hence, the magnitude of requires force is 200 Newton.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ5

Answer:

a. 3.73 m/s b. 27.8 m/s²

Explanation:

(a) Calculate his velocity (in m/s) when he leaves the floor.

Using the conservation of energy principles,

Potential energy gained by basketball player = kinetic energy loss of basket ball player

So, ΔU + ΔK = 0

ΔU = -ΔK

mg(h' - h) = -1/2m(v'² - v²)

g(h' - h) = -1/2(v'² - v²) where g = acceleration due to gravity = 9.8 m/s², h' = 0.960 m, h = 0.250 m, v' =0 m/s (since the basketball player momentarily stops at h' = 0.960 m) and v = velocity with which the basketball player leaves the floor

Substituting the values of the variables into the equation, we have

9.8 m/s²(0.960 m - 0.250 m) = -1/2((0 m/s)² - v²)

9.8 m/s²(0.710 m) = -1/2(-v²)

6.958 m²/s² = v²/2

v² = 2 × 6.958 m²/s²

v² = 13.916 m²/s²

v = √(13.916 m²/s²)

v = 3.73 m/s

(b) Calculate his acceleration (in m/s2) while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.250 m.

Using v² = u² + 2as where u = initial speed of basketball player before lengthening = 0 m/s, v = final speed of basketball player after lengthening = 3.73 m/s, a = acceleration during lengthening and s = distance moved during lengthening = 0.250 m

So, making, a subject of the formula, we have

a = (v² - u²)/2s

Substituting the values of the variables into the equation, we have

a = ((3.73 m/s)² - (0 m/s)²)/(2 × 0.250 m)

a = (13.913 m²/s² - 0 m²/s²)/(0.50 m)

a = 13.913 m²/s²/(0.50 m)

a = 27.83 m/s²

a ≅ 27.8 m/s²

Answer:

rotates

Explanation:

I'm so bored

yrfgggghhgghhyuj

Answer:

Newton's theory identified mass as the factor that causes gravity. On the other hand, Einstein's theory identified the curvature of space-time as the factor that causes gravity.

Answer:

Hey mate...

Explanation:

This is ur answer....

In the 17th century Newton concluded that objects fall because they are pulled by Earth's gravity. Einstein's interpretation was that these objects do not fall. According to Einstein, these objects and Earth just freely move in a curved spacetime and this curvature is induced by mass and energy of these objects.

Hope it helps you,

mark me as the brainliest.....

Pls answer my 2 recent questions by going on my account...

Follow me!

Answer:

Spring constant in N / m = 6,000

Explanation:

Given:

Length of spring stretches = 5 cm = 0.05 m

Force = 300 N

Find:

Spring constant in N / m

Computation:

Spring constant in N / m = Force/Distance

Spring constant in N / m = 300 / 0.05

Spring constant in N / m = 6,000

Answer:

The acceleration is 2.448 meters per square second and is vertically upward.

Explanation:

The Free Body Diagram of the plastic ball in the liquid is presented in the image attached below. By Second Newton's Law, we know that forces acting on the plastic ball is:

[tex]\Sigma F = F - m\cdot g = m\cdot a[/tex] (1)

Where:

[tex]F[/tex] - Buoyant force, measured in newtons.

[tex]m[/tex] - Mass of the plastic ball, measured in kilograms.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]a[/tex] - Net acceleration, measured in meters per square second.

If we know that [tex]F = 5\,N[/tex], [tex]m = 0.408\,kg[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then the net acceleration of the plastic ball is:

[tex]a = \frac{F}{m} - g[/tex]

[tex]a= 2.448\,\frac{m}{s^{2}}[/tex]

The acceleration is 2.448 meters per square second and is vertically upward.

Answer:

I think its object 1

Explanation:

Because the object that has more weight has a greater momentum and the lightest object that has a less momentum will be easier to change because its lighter.

Answer:

m = [tex]\frac{k}{g}[/tex] x,

graph of x vs m

Explanation:

For this exercise, the simplest way to determine the mass of the cylinder is to take a spring and hang the mass, measure how much the spring has stretched and calculate the mass, using the translational equilibrium equation

              F_e -W = 0

              k x = m g

              m = [tex]\frac{k}{g}[/tex] x

We are assuming that you know the constant k of the spring, if it is not known you must carry out a previous step, calibrate the spring, for this a series of known masses are taken and hung by measuring the elongation (x) from the equilibrium position, with these data a graph of x vs m is made to serve as a spring calibration.

  In the latter case, the elongation measured with the cylinder is found on the graph and the corresponding ordinate is the mass

Answer:

stop

Explanation:

object stop

Answer:

If two forces of equal strength act on an object in opposite directions, the forces will cancel, resulting in a net force of zero and no movement. Two or more opposite forces are balanced forces if their effects cancel each other and they do not cause a change in an object's motion.

Answer:

2500 m

Explanation:

Given that,

Each lap is 500 m

Gareth takes 5 laps.

We need to find distance traveled by Gareth. The distance covered by him is given by :

d = 5×500

d = 2500 m

Hence, he will travel 2500 m.

Answer:

B. holding a coffee mug

Explanation:

Something must move a distance for work to be done.

Answer:

s=136.89/2g meter

s=6.98 meter (correct to 3 sig.fig. taking g=9.81ms^-2)

Explanation:

u= + 11.7 ms^-1

a= - g ms^-2

At highest point: v=0ms^-1

v^2=u^2+2as

0=11.7^2+2(-g)s

s=136.89/2g meters

Answer:

[tex]3.031\times 10^{-5}\ \text{m}[/tex]

Explanation:

[tex]y[/tex] = Distance between central maxima and first minimum

m = Order = 1

d = Thickness of hair

[tex]\lambda[/tex] = Wavelength = 632.8 nm

L = Distance between light source and screen = 1.25 m

Width of central maximum is given by

[tex]2y=5.22\times 10^{-2}\\\Rightarrow y=\dfrac{5.22\times 10^{-2}}{2}\\\Rightarrow y=0.0261\ \text{m}[/tex]

Distance between central maxima and first minimum is given by

[tex]y=L\tan\theta_{min}\\\Rightarrow \tan\theta_{min}=\dfrac{y}{L}\\\Rightarrow \tan\theta_{min}=\dfrac{0.0261}{1.25}\\\Rightarrow \theta_{min}=\tan^{-1}0.02088\\\Rightarrow \theta_{min}=1.1962^{\circ}[/tex]

Since [tex]\theta[/tex] is small [tex]\tan\theta_{min}=\sin\theta_{min}[/tex]

[tex]\sin\theta_{min}=\dfrac{m\lambda}{d}\\\Rightarrow d=\dfrac{m\lambda}{\sin\theta}\\\Rightarrow d=\dfrac{1\times 632.8\times 10^{-9}}{\sin1.1962^{\circ}}\\\Rightarrow d=3.031\times 10^{-5}\ \text{m}[/tex]

The strand of hair is [tex]3.031\times 10^{-5}\ \text{m}[/tex] thick.

Answer:

[tex]31.035^{\circ}[/tex]

Explanation:

x = Displacement in x direction = 5.34 m

t = Time taken to travel the displacement

y = Displacement in y direction = 0

u = Initial velocity of ball = 7.7 m/s

g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]

Displacement in x direction is given by

[tex]x=u\cos\theta t\\\Rightarrow t=\dfrac{5.34}{7.7 \cos\theta}[/tex]

Displacement in y direction is given by

[tex]y=u\sin\theta t-\dfrac{1}{2}gt^2\\\Rightarrow 0=7.7\sin\theta \dfrac{5.34}{7.7\cos\theta}-\dfrac{1}{2}\times 9.81 (\dfrac{5.34}{7.7\cos\theta})^2\\\Rightarrow 0=7.7\sin\theta-4.905\times \dfrac{5.34}{7.7\cos\theta}\\\Rightarrow 0=7.7^2\sin\theta \cos\theta-4.905\times 5.34\\\Rightarrow 0=7.7^2\dfrac{\sin2\theta}{2}-4.905\times 5.34\\\Rightarrow 0=7.7^2\sin2\theta-4.905\times5.34\times 2\\\Rightarrow \sin2\theta=\dfrac{4.905\times 5.34\times 2}{7.7^2}\\\Rightarrow 2\theta=\sin^{-1}\dfrac{4.905\times 5.34\times 2}{7.7^2}[/tex]

[tex]\Rightarrow \theta=\dfrac{62.07}{2}\\\Rightarrow \theta=31.035^{\circ}[/tex]

The angle at which the ball was thrown is [tex]31.035^{\circ}[/tex].

Answer:

Distillation separates a liquid from a solution. For example, water can be separated from salty water by simple distillation. This method works because the water evaporates from the solution, but is then cooled and condensed into a separate container. The salt does not evaporate and so it stays behind.

Answer:

The reckage after collision is motionless (E)

Explanation:

The first law of thermodynamics states that energy is neither created nor destroyed but is converted from one form to another.

The kind of collision described in the question above is known as a perfectly inelastic collision, and in this type of collision, the maximum kinetic energy is lost because the objects moving in opposite directions have a resultant momentum that is equal, but in opposite directions hence they cancel each other out.

The calculation is as follows:

m₁v₁ + m₂v₂

where:

m₁ = m₂ = 1000kg

v₁ = 20 m/s

v₂ = -20 m/s ( in the opposite vector direction)

∴ resultant momentum = (1000 × 20) + (1000 × -20)

= 20000 - 20000 = 0

∴ The reckage after collision is motionless

Answer:

The wreckage after collision is moving at the speed 18 m/s to the south.

Explanation:

Answer:

Yes it is

Explanation:

Electricity is the positive and negative matter that's found in protons and electrons.

Answer:

yes

Explanation:

because electricity is a positive and negative proton

Answer: Option b.

Explanation:

We know:

Wavelength = 632.8 nm

Fluence = 4.5*10^20 photon/s

The energy of a single photon of wavelength λ is:

E = (h*c)/λ

where:

h = 6.6*10^(-34) J*s

c = 3*10^8 m/s

And we should rewrite the wave length in meters, so:

λ = 632.8 nm = 632.8*10^(-9) m

replacing these in the energy equation, we get:

E = (6.6*10^(-34)J*s)*(3*10^8 m/s)/(632.8*10^(-9) m) = 3.13*10^(-19) J

So each one of the  4.5x10^20 photon that flow each second have this energy, then the power is:

P = (3.13*10^(-19) J)*(4.5*10^20 /s) = 140.85 J/s

and 1 W = 140.85 J/S

Then the power is:

P = 140.85 W

Then the correct answer is the option b, where the units are a little bit different than mine because I used really simplified values for c and h.

Answer:

Density is affected by volume and mass.

Explanation:

Density is defined as the quantity of mass per unit of volume, or expressed mathematically, d = m/v.

Answer:

27 ms^-1

Explanation:

by using v= u + at

u = 0 ( because the object id starting from rest)

v= 0 + 1.5 x 18

v = 27 ms^-1

Answer:

the Laws of Thermodynamics

Explanation:

these laws states that no form of energy can be created by anyone or anything, without a previous and equal input of energy being put in, that energy can only be transferred from object to object and through different forms

Example: the way a heater runs to warm up an area, that is the process of electrical energy, or energy stored in propane being converted into heat energy

this law is universally implied and has been proven on multiple accounts to be true, in no way can you create energy out of thin air, all you can do is transform and transfer it

hope this is what you was going for, very good point in science

this is one of two correct answers, the other answer to this question is also correct